Best way for Email Notifications in EWS Managed API 2.0 [ Exchange Server 2013]

Hi ,
I want to know best way for Email Notifications in Exchange server. My
organisation has
10 users, i want to get notification if any user mailbox got any new mail.
i need to create API,
that was consumed by another Team in their Application.
I am using Exchange server 2013.
Please share Your Ideas.
Thank you

Take a look at EWS Notifications
http://msdn.microsoft.com/en-us/library/office/dn458791(v=exchg.150).aspx .
Cheers
Glen

Similar Messages

What is the best way for email processing setup on CRM 2013 (on- premises) Set up?

We need to notify customers via CRM 2013 for some activities.
I searched regarding email processing set up, and i found two options:
1. via outlook
2. Via Exchange Server.
Tried through email router (exchange server), but it requires exchange online or SMTP for outgoing profile.
I do have exchange on premise setup, I am not sure about SMTP option.
My queries are:
> Can we configure Exchange server to work as Exchange Online?
> what other option, I can try for email Processing?
looking for your suggestions...
Thanks in advance!

If you have Exchange onPremise, then you should be able to use the email router or server side sync in combination with CRM workflows (to generate the email). This is a fairly common scenario. You do not need Exchange Online.
http://technet.microsoft.com/en-us/library/dn531109(v=crm.6).aspx
http://technet.microsoft.com/en-us/library/dn531050(v=crm.6).aspx
http://www.microsoft.com/en-us/download/details.aspx?id=40342
Regards, Donna

How to test email notification is working or not without any exchange serve

Hi,
Please help me find a way to test email notification after user gets created in OIM and provisioned to OID. The requestro should get a mail that his request has been processed/approved.
Thanks.

Substituting corporate email server with something local like Argosoft is a good idea but not a 100% test since most problems occur when you talk to corporate email server.

Internal NAV2013 to relay email externaly through our internal exchange server 2013

ello,
We are using NAV 2013 to externally relay email outside and inside through our in house Exchange server 2013.
I created a new Frontend connected with "TYPE" Custom and selected specific ip to configure relay through exchange server.
Once created the Receive connectors I want only Anonymous permission to be set under permission group and not exchange users as this is allowing external 3rd party exchange server to relay emails through our exchange server.
When i edit the properties of the exchange server to uncheck Exchange Server it gives me an error
"You must set the value for the PermissionGroups parameter to ExchangeServers when you set the AuthMechanism parameter to a value of ExternalAuthoritative."
My motive is that I want to allow only the NAV2013 to relay emails through our exchange and no other exchange server or any other application for security reasons.
Once i created a Receive Connectors bydefault TLS is selected and then i put a tick mark on Anonymous but as soon as i save i get error "You must set the value for the PermissionGroups parameter to ExchangeServers when you set the AuthMechanism parameter
to a value of ExternalAuthoritative." and it doesn't let me save unless i select Exchange Server
I have followed the same link that you provided me.
There is another problem as well, I have restricted a distribution group from receiving email from external to the organisation but as soon as i created this relay connectors this group starts receiving email external to the organisation which is very strange.
I tested by disabling the relay connector and then sending email from gmail and then i get a bounce in gmail and the DG doesn't receive email but as soon as I enable relay connector the distribution group starts receiving email.
I have also recreated the connector as well but still the same issue.
Please help

Hi,
Please double check whether the "You must set the value for the PermissionGroups parameter to ExchangeServers when you set the AuthMechanism parameter to a value of ExternalAuthoritative" is an error, we can safely ignore it if it
is only a warning message.
I found a related KB for your reference even if the Exchange server version is mismatched.
Exchange 2010: Get-ReceiveConnector warns that an Exchange 2007 connector is corrupted and in an inconsistent state
http://support.microsoft.com/kb/2291884
Please double confirm the following setting:
Authentication tab: Checked TLS and Externally Secured.
Permission Groups: Anonymous users, Exchange Servers
Thanks
Mavis
Mavis Huang
TechNet Community Support

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

What is the best way to email a video from iPhoto? It won't let me share a video!

what is the best way to email a video from iPhoto? It won't let me share a video!

Size is not the issue. In the old iPhoto you used to be able to share a video and it would compress it to fit an email friendly size. It doesn't do that anymore from iPhoto. I miss that feature. I have to export the video from iPhoto to my desktop then take into the old Quicktime 7 to share in email. Crazy.
It shouldn't be that complicated. I shouldn't have to find a work around. I guess apple wants to put you in a box so you have to do it "their way" via uploading to iWeb or iCloud instead of emailing video.
I don't like those options being taken away. While the quality may suffer by compressing for email, it is still the most direct and unconvoluted way of sharing something fairly quickly. I don't want to have to post to YouTube or Vimeo or iCloud and send a link. Just compress the video and hit send in an email and be done with it.

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC

Hello, what is the best way for me to convert RW2 raw format for use in Photoshop CC. I would appreciate any help with this.

Thanks for the quick help. I do have to leave for work. When I try to
download the images from the camera they seem to only be in jpeg (I don't
see any rw2 or raw files to download). If I select the jpeg file it seems
to only download a jpeg file. I do understand that I do have the option to
open the jpeg in RAW. In doing this, is all the extra information included
in the RAW file there or is it lost coming from the camera
Once again thank you for trying to make me understand how this works.
Have a great day.
On Sat, Sep 13, 2014 at 12:14 PM, ssprengel <[email protected]>

What is the best way to email a webpage?

This concerns sending (emailing) a webpage to someone.
• Amazon.com has a feature that allows one to page through a book that you may be considering purchasing.
• I want to email some of the text from a page in one such book to someone else.
• Although the page is viewable to me I have not found a way to copy it (to then paste it into an email), nor can its URL be sent as a unique (and openable) locator address.
What is the best way for me to email the text? (I tried saving it via 'Print as Compressed PDF') but the result was not viewable even to me, so it won't be to my correspondent either).
While I'm at it, what is considered to be the best way to view PDF's on the Mac -- the built-in PDF viewer seems rather limited. (Maybe that's why I couldn't view the saved PDF file of the webpage -- should I download the Mac version of Adobe Reader?)
Many thanks.

It doesn't work...
It works for me in the Safari 3 beta. I'm actually surprised if the beta does much that's different with the "Mail Contents of This Page" command than Safari 2....
I tried The Yiddish Policemen's Union: A Novel on Amazon (first searchable book I found quickly clicking in the Books section ). I just emailed myself a page - the first search result for the word "something." The email I received is perfect - the entire page from the book plus the Amazon page around it, all perfectly formatted.
I suppose if you don't use Mail.app for your email program that might not work as well. Are you using Mail or another email program?

What the best way for STORAGE the documents from DMS?

Please, can someone tell me if the limit of storage the originals through a data carrier is two for document or i can to large this limit? 'Cause i know that using Kpro i don't have limit of storage, but i'm trying to use the data carriers 'cause i just have a place in the company server for storage this originals.
I'm trying to send the originals from a path like this
abcs01\dms$\ through of a configuration "servidor, front ends", but i'm not get to send the originals from CV01N for this place, even the document been save. I verify that the documents were not sent when i enter from the CV02N in the same document and try to change or screen the originals, 'cause i receive a error message saying that the SAP doesn't get to find the originals on the path indicated.
Did someone just work on a likely situation?
Did someone have a view about the best way to storage this documents in this case?
If the best way will be KPRO, Do I use KPRO with the Content Server or KPRO with storage the documents in a SAP table through of the standard system aplication "DMS_C1"?
Any idea will be welcome and reward by good points!
Best Regards.

Hi,
The decision to go for either content server or vault depends on what data will be stored. If you are storing drawing data it is highly recommended to go for content server.
For vault storage performance issues are reported.
DMS_C1 is IDES based BSP database repository. It is useful only for dev/testing.
You will be required to create storage repository for CS.
If you have server available when you insert content server CD inside it, it automatically asks you for maxDB database instance creation. As you click on next it will take you further to create maxDB instance. K-Pro is service on web server. It is used to manage the checkin-checkout and other functionalities of the CS server data.
BR,
Anirudh,
reward if useful.

What is the best way for my partner and I to share our work across computers?

What is the best way for my business partner and I to share our work (projects, libraries, images) across computers without emailing items? Is there creative cloud storage place we can share?

Can't I just purchase the 200 GB storage, throw our photo library in it, share it with her, and have both of our new and future pics dumped into it? If so, how do I do that?
The iCloud Photo Library cannot be shared between users, unless you are using the same AppleID.
You can share selected photos with shared albums: iCloud: iCloud Photo Sharing FAQ
Or create a Photos library on an external drive, that you both can access, as described here for iPhoto: iPhoto: Sharing libraries among multiple users

Create and send an email as a delegate using EWS Managed API

Hi All,
I would like to create and send an email as a delegate using EWS Managed API for that i have crated one user as a delegate to that mailbox owner.
after adding user as delegate, when i try to create an email The EmailMessage class taking only FolderId as parameter but not taking Mailbox object as parameter. But in web reference they said that EmailMessage taking FolderId and Mailbox object as parameter.
EmailMessage message = new EmailMessage(service);
message.Subject = "Company Soccer Team";
message.Body = "Are you interested in joining?";
message.ToRecipients.Add("[email protected]");
message.Save(new FolderId(WellKnownFolderName.Drafts, new Mailbox("[email protected]")));https://msdn.microsoft.com/EN-US/library/office/dn641963(v=exchg.150).aspx#bk_createewsmacould you people please help me on this?ThanksNaresh

Thanks for reply glen.
I have added delegate using Add-MailboxPermissions. Now i am able to save an email in mailbox owner drafts
folder.
Glen,
I have a one more question.(I am using EWS Managed API).
I(owner) have shared my calendar(eg. samplecalenderfolder) with another user(delegate) (i.e.,he is the
delegate of my mailbox) and i have given only permission to the this folder(samplecalenderfolder)
only and the permission level is Reviewer.
if i login with user(i.e.delegate) i am not able to get the shared calendar folders(i.e.,samplecalenderfolder)
that what i a have shared.
below is the code snippet i am using to get the calendar folders.
Folder folder = Folder.Bind(service,WellKnownFolderName.Calendar);
FindFoldersResults addtionalFolders = service.FindFolders(folder.Id, new FolderView(10));
could you please tell us how to get the shared calendar folders.
Thanks
Naresh

What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
Thanks

Hi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy

Best way for building an application main frame

I'm about to program a desktop application.
The main frame will have menus, toolbar, status bar etc.
There will be a lot of interaction between the menus, toolbar buttons and other custom gui components (such as an editor).
My question is which is the best way for building it.
Cramming all the code in one class file is out of the question.
I thought about making my own custom JFrame and add API functions like for it so different GUI elements can be accessed.
Each component which will be manipulated will be in its own class file with the constructor accepting a reference to my custom JFrame object which it is contained in.
Any suggestions on the matter would be of great help since I've never done extensive Swing programming before.
P.S.
The application makes extensive use of RMI.
What considerations should I take into account (except using SwingUtilities.invokeLater()) ?

Hi,
I have replied on this subject somewhere else today but what I do is have one simple entry point where I just instanciate a JFrame.
On that frame I have a main JPanel. On that panel I add new objects like JPanels, tabs etc.
I keep each new panel in a separate source as it is easier when the application grows, and it will. That also means that several programers can work with the same application without interfearing each other.
I hope you understand what I mean the the thing is to split up the code into several sources.
It may not suit everyone but I found this approach to be the best for me.
Klint

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto?

WHat is the best way for other iphone users to share pictures with me? I am doing a project which req. people to send me 100 pictures at a time that I'll be putting in my iphoto? thank you.

ingridlisa,
I'd suggest to ask them to create Shared PhotoStreams and to invite you to view the streams, see:
iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie
Added:
that I'll be putting in my iphoto?
Will you be collecting the photos in iPhoto on your iPhone or on a Mac? On a Mac a Shared PhotoStream requires Mac OS X 10.8.2.

Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). What is the best way for me to install it?

Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?

Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh

Best way for Email Notifications in EWS Managed API 2.0 [ Exchange Server 2013]

Similar Messages

Maybe you are looking for