Best way/settings to export from FCP to DVDSP

Hey - I have a program I need to export from FCP to DVDSP.
It is approx. 1hr 15min long.
What would be the best settings to use to maximize quality?
I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor???
This is a very important showreel and quality is a major factor...
I am using: FCP 5.1.4 DVDSP 4.1.2 Compressor 2.3
Thanks for all your help in advance!
PowerPC G5 Mac OS X (10.4.9)

Hi:
<< What would be the best settings to use to maximize quality?>>
You didn't mention your movie codec. Assuming you are using DV, if your FCP projects has graphic elements and heavy filters like Color Corrections, etc. you must get the best quality exporting directly from FCP through Compressor.
If your movie is basiclally DV video with no graphics, you probably will get same quality and shorter encoding times exporting as QuickTime movie, self settings (self contained is my favorite flavor!) and using this file in Compressor.
In Compressor use the DVD: Best Quality 90 min preset as starting point taking the MPEG2 and the Dolby 2 (AC3) presets. You most probably will get the best audio level changing the followings parameters in the standard AC3 preset:
- Dialog Normalization: -31
- Compression preset: None
Using uncompressed (AIFF/PCM) audio in DVD-Rs is a major cause of playback problems and/or building errors because the high bitrate, and takes a lot of your disc space.
If you encode inside DVDSP (using the Quicktime movie file directly in DVDSP) you'll get AIFF audio. DVDSP doesn't encode your audio to AC3.
<<This is a very important showreel and quality is a major factor...>>
To save encoding testing times, take a short part/s of your movie and make some encoding test. Select some parts of your footage with fast movements in the image and/or heavy transitions to check the final result.
<<I also want to include chapter markers for importing into DVDSP - is it better to create these in FCP or Compressor??? >>
Allways create your chapter markers in FCP or Compressor. That way you can set the exact frame where to locate it and DVDSP will preserve that position. If you add a Chapter Marker in DVDSP it will be moved to the nearest GOP boundary, not in the exact frame you decided. Check this tutorial about Chapters and Compression Markers .
Don't forget to post your FCP movie codec/settings.
<<StirFry..>>
I think that a bitrate of 7.9 Mbps with uncompressed audio (DVDSP doesn't encode audio to Dolby 2) is too high and can cause some encoding/playback errors in some DVD players. Someone else can post his mind about this ! ;D
Hope that helps !
Alberto

Similar Messages

Best settings to Export from FCP to iWeb?

In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
is there a simpler way to get video to iWeb?
I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
Thanks

In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
is there a simpler way to get video to iWeb?
I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
Thanks

What should I use to export from FCP to DVDSP?

I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

Hi Ryan,
I'm relatively new to this too but you're on the right track. I would export to Compressor.
There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
You should end up with a file that resembles *My Movie.m2v*
Then import that file into DVDSP into the assets pane and you're away.
Good luck!
-Chuck

What's the best compressor setting to export from FCP to DVD Studio Pro?

I am exporting an 11 minute video from FCP Studio 2 via compressor to go to DVD Studio Pro. It's DV PAL 720 x 576 and I intend the final DVD to be 16:9 so I'll be choosing 16:9 letterbox in DVDStudio Pro.
As my video is only 11 minutes am I losing quality by selecting Best Quality DVD 90 minutes?
And is the way I described above the best way to go about it?

You should try the setting as a start, though there are many tweaks you can do if you do not like the results. One of the biggest tweaks is the frame controls (adds more time but can help.)
You should send out to a preset for 16:9 (or make your own setting with aspect ratio of 16:9) then flag the track in DVD SP to 16:9 Letterbox
Some links
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
And a quick Compressor (2 but same principles for 3) movie here
http://dvdstepbystep.com/qc.php

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

Export settings for sequence from FCP to Avid PC

Hi,
Please can someone give me the best export settings/codecs to use if I need to export a FCP sequence with clips shot on XDCam EX1, 1920x1080i, 35 mbs at the least quality loss possible so that it can be imported into an Avid on PC for titling, effects and other bits added? My on-line editor is on Avid PC.
Many thanks
Belinda

Hee....missed that final sentence somehow.
So...offlining imported footage on FCP that you will online in Avid? What is there to online? You imported at full resolution. Must be color correction.
OK then...you edit in FCP from imported XDCAM EX footage...and you intend to go to Avid for the final color correct and titling. Did you plan for this? Test this? because I am pretty sure that the QT files that were created when you imported with the transfer tool won't work on a PC. Unless you tested and they did. But it appears that they don't as you are asking how to get them there.
Did you not ask this question when you started this show? That is ALWAYS something you do. If you plan on doing a certain workflow, you have to make sure that the workflow in question will work. Offline and online from tape is fairly simple, as you can recapture from the tape...timecode being the big thing there. But this is IMPORTED footage. Full clips, and I don't see how you can import only what is used in a sequence.
This issue, coupled with FCP to Avid...and Avid on a PC no less. Well. Find a codec you can export from FCP that the Avid can read (this will require testing), then MEDIA MANAGE the footage to that codec. Hmm....but then how will the Avid read the FCP project file to reconnect to the footage?
Nope...I stand by my original answer. Output to XDCAM disk and recapture, or to HDCAM or HDCAM SR tape and recapture.
Shane

What is the best way to import pictures from Lightroom 5 into FCP X

What is the best way to transfer pictures from Lightroom 5 into Final Cut Pro X?

There is no one best way. If, for instance, you want to be able to zoom into the picture with a Ken Burns effect then you may want to save out a very high res version that will be larger than your video resolution. Just use Lightroom to export a jpg file wherever you want it. You could export it into the Events folder and then choose not to copy it when you import it within FCPx. You could import the picture into iPhoto and then access it directly from within FCPx. Those are two simple, "regular" ways to get it into FCPx but if you are not going to Ken Burns the image by zooming into it and such you will want to crop it in Lightroom to the same size you will be using ie if you are making 720HD video then crop the image to that size and proportion before you export it from Lightroom.

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

Problem exporting from FCP using compressor

Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
Hope this helps anyone else in similar situations
Martin
G5 PPC Mac OS X (10.4.8) FCP 512 post production

Hi:
How long is your movie?
The best workflow is FCP > Compressor > DVDSP.
You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
To give you detailed info about what encoding settings to use you must post some info about your FCP project.
Hope that helps !
Alberto

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

The best way to import photos from Picasa to iPhoto

Hi,
Many of my friends share their pictures online using picasa. Sometimes, I'd like to copy these pictures to keep a backup offline. As a software, I use iPhoto; not picasa. What is the best way to import pictures from picasa to iPhoto?
I first tried to subscribe to the RSS feed using iPhoto and then copy the pictures from there to my library, but then the dates of the pictures are set wrong: instead of indicating when the picture was shot, it indicates some other date (I guess it indicates the date when the picture was uploaded to picasa).
Then I decided to install the software picasa.app. From the webalbum of my friends, I could download the pictures directly to picasa.app. Then I exported them to the desktop, and from there imported them to iPhoto. The dates where set correctly, but I lost all the titles and comments of the pictures.
Do you have any method to download the pictures while keeping both the dates and the titles correctly?
Thanx!

There is a direct option in Organizer which lets you import from iPhoto. This is under Import dropdown menu in left panel.
If you are importing from iPhoto'09, your Tags, Albums Events, captions, star rating would also get imported apart from your media. This works differently for iPhoto'011 where you can get only the media to the Organizer,
Just a couple of things to know:
1. If in iPhoto preferences, you have chosen to create copies of your photos in iPhoto library and your library hence refers to the media store inside the library package, then on importing from iPhoto, Organizer would create copies of all those media under your pictures folder. That means, it would not corrupt your iPhoto package or modify it in any way.
2. However, if in iPhoto, you are organizing by using references to original location on your Hard drive i.e. you are not creating copies of media in iPhoto library then on importing from iPhoto to Organizer, the Organizer would also use the same references and would not create copies of the media.
Hope that helps!
~V

Best way to transfer files from old Macbook Pro to new one?

I just got a new Macbook Pro from Apple...YEEEEAAAHHHH!
So....
What's the best way to transfer files from old Macbook Pro to new one? I know Migration assistant, but is there a recommended way? I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over. Any suggestions on best way to do this?
Another question, perhaps subquestion. If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
Just looking for hints from the experts so this puppy is set up in the best way possible.

Just one comment on this:
‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
Otherwise, see the link to Pondini.
I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

Best way to transfer application from Test Environment to Dev. Environment

Hi All,
We are try to create an application on Hosted Environment similar to www.apex.oracle.com.
We got two work space
1. app_production
2. app_test
My application will have 200+ tables and many other supporting object.
My question is in hosted environment what is the best way to copy application from test to production environment (P.S In hosted environment I can uses SQL Developer / TOAD or any other tool .. its similar to www.apex.oracle.com)
With my present workaround I have to use
Go to Utilites -> Generate DLL
and then export this and application..
The main problem is 200+ table and associated structures .. its very difficult to keep track ...
Can anyone suggest me any good way for HOSTED ENVIRONMENT

Hi,
Just an idea:
1 - Do a DDL export of the source env
2 - Do a DDL export of the target env
3 - Use some tool to compare those files and highlight the differences. There are even some tools that are smart enough to generate SQL statements to apply the differences in the target env.
I hope this helps.
Luis

Best way to extract data from archived cube

Hello Experts,
Can anyone tell me best way to extract data from archived cube.
Basically I am trying to pull all the data from archived cube and then load it into another brand new infoprovider which is in different box.
Also I need to extract all the master data for all infoobjects.
I have two options in my mind:
1) Use open hub destination
or
2) Infoprovider>display data>select the fields and download the data.
Is it really possible to extract data using option (2) if records are too high and then load it into another infoprovider in new system.
Please suggest me the pros and cons for the two options.
Thanks for your time in advance.

Hello Reddy,
Thanks a lot for your quick reply.
Actually in my case I am trying to extract archived infocube data and then load it into new infoprovider which is in different system. If I have connectivity I can simply export data source from archived infocube and then reload into new infoprovider.
But there is no connectivity between those two systems (where archived cube is and new infoprovider) and so I am left with the two options I mentioned.
1) Use Open Hub
or
2) Extract data manually from infoprovider into excel.
Can anyone let me know which of the two options is the best and also I doubt on how to use excel in extracting data as excel have limit of no.of records 65536
Thanks
Edited by: saptrain on Mar 12, 2010 6:13 AM

Exporting from FCP to .mov - backwards compatibility

Am working from NJ with a client in CA. She is struggling to export her FCP movies into a .mov format that will play on quicktime (specifically on OLDER versions of quicktime). I've been able to assist her in exporting to the .mov format, but it only plays in the quicktime 7 player. Most of her customers do not have that installed and thus cannot view the movie (and, they do not want to take the time to install).
I would like to be able to walk her through the steps/settings/parameters necessary for her to export into a .mov format which will play in older quicktime players (without forcing the user to update their player).
example of .mov: http://advertisingusa.tv/0_home/index.shtml
many thanks in advance,
windandkitesurfer

Trying to export from FCP to backwards compatible .mov or .mo4 format.
We're trying to use Sorenson 3 compression, and are able to create this but the file is created without any extension.
We are using FCP, export using quicktime conversions, then under options->settings->compressor type = "Sorrenson Video 3"
Still are not able to create a movie file backwards compatible. Any further assistance greatly appreciated.
Note the time lapse between emails due to the problem of communicating coast to coast - the web developer is not the first in line for return emails
regards
Mac OS X (10.4.8)

Best way/settings to export from FCP to DVDSP

Similar Messages

Maybe you are looking for