Best way things to put on new internal drive

(I hope this is the most suitable forum - it's about file structure in Tiger rather than something to do with the physical aspects of the new drive.)
I only have 30 GB of my 250 GB hard drive left, and am just about to intall an additional new 250 GB hard drive into my G5 Powermac. (Wish me luck.) I assume the new drive will appear as a separate volume. What I'd like to know is what people think would be the best things to put on the new drive, given that I have this belief that Tiger is slightly fussy where things are. Is it possible to move the complete Applications folder, for example or my whole Users folder? Could I safely move some third-party applications from the Applications folder? I particularly have large iTunes and iPhoto libraries - could I move these on to the second drive without causing problems or any performance decrement?
Or am I just wrong, and it doesn't matter too much where things are, particularly if I don't get asked for my password when moving it?
Powermac G5 dual 2.0 Mac OS X (10.4.8) 2 GB RAM BT AP
Powermac G5 Mac OS X (10.4.3) 2 GB RAM BT AP

Hi Trevor
I'm assuming that you'll continue to have the operating System on your existing drive (?)
If so, then it's important that all Apple applications remain in the existing Applications folder - don't move them. This is because OSX & Application updates expect to find the apps there & future application updates will not work if you move them.
There should be no problem at all in moving itunes & iphoto libraries to the new drive.

Similar Messages

Best way to migrate to a new SSD drive for performance and reliabilility

Hello all,
My 2011 15" MacBook Pro is about 3 weeks old and my new OCZ Vertex 3 120GB SSD is coming in tomorrow.
What is the best way to move my system over to the new drive? I have Time Machine backups on my external Firewire drive as well as complete drive images made with CCC. I have read where some have had problems cloning to a new SSD using a drive image.
My plan is to format the drive and install the OS with the cd then move my applications and files over with Time Machine but it would be much easier to just clone the existing drive image but I don't want any problems down the road. What is the best practice?
Thanks.

Follow this outline:
+Step One+: Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Quit and shutdown.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
+Step Two+: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who are also a good vendor for drives.
+Step Three+: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
+Step Four+: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
+Step Five+: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive.
Source means the old external drive.
+Step Six+: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Best way to transfer data to new internal hard drive

Hi,
I just got a new internal hard drive for my macbook and I'm trying to figure out the best way to transfer all the data from my old hd to the new one. Basically, I would just like to make an exact copy of my old hd and put it on the new larger one. Thanks for the help.

Will I simply be able to do a firewire transfer on the new internal HD is installed
Yes. Use Carbon Copy Cloner with the sopurce and destination volumes reversed after installing the new drive.
Additionally do I need a bootable copy of OSX on my external HD to do the transfer?
Yes; the clone can act as this copy. If you copy everything with Carbon Copy Cloner, you will be told whether the drive will be bootable or not prior to the clone.
(33676)

Best way to transfer everything on new hard drive for mac book pro

Hi have a mid-2009 macbook pro with 4 GB ram and 250 GB hard drive, which is full now. I just bought 8 GB RAM to speed it up and a new 1 TB hard drive. I am running latest Lion (that I downloaded from mac app store - I have the original install DVD for Snow leopard). What would be the best and cleanest way to transfer everything (OSX, applications, data, files, user preferences, passwords, etc from the old hard drive to the new one)^
1- I heard I can hook the new hard drive via USB and do a clean install of my Snow leopard DVD, then update to Lion via mac app store. Then how do I transfer everything else?
2- I also heard about carbon copy cloner, but somewhere it says there is a file in Lion that this will not copy.
Anybody have any helpfull answers?
thanks
Naniners

My suggestion would be to use Migration Assistant. This program you have in your Utilities folder and once you hook up your old Hard Drive to the new computer via USB or Target Disk mode, it will pretty much direct you on how to do the whole process. If you have any other questions, let me know.
Migration Assistant steps for 10.6xxx
http://support.apple.com/kb/HT4413
Migration Assistant steps for 10.7xxx
http://support.apple.com/kb/HT4889
I've done this many times and it works very well.

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Be sure you have prepared the new drive correctly:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

My wife has gave me her old ipad what would be the best way to set up her new ipad and to have my own ID?

My wife has gave me her old ipad what would be the best way to set up her new ipad and to have my own ID?

Backup the old iPad first, either to itunes or iCloud.
Once that is done, setup the new iPad from the backup. Choose the Restore from Backup option when setting up the new iPad.
iOS: How to back up / Restore
http://support.apple.com/kb/ht1766
When that is done, wipe the old iPad clean and set up as new.
Settings->General->Reset->Erase all Content and Settings
You can create a new Apple Id when you set up the iPad again.

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average ?

I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated

How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes.

Best way to move to an external boot drive

I going to move my main iMac boot drive to an external as I need to be able to pick it up and go and use it on the move with my MBP.
What is the best way to clone the iMac's internal and then put it on the external. Both drives are 320GB in size.
Can I use CCC or should I use disk utility from the boot DVD to create an image and then restore it to the external? My thinking behind the Boot DVD way is that nothing will be running when I do it...
Regards

Normally doesn't matter. The code running the machine is stored in RAM. CCC and other cloning apps duplicate what's stored on disk. The only problem you might run into is if you try to save something while you're cloning. For your purposes, since you're doing this for the first time, run CCC, and go get a coffee and a danish. Or, just watch what's taking place.

TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

How Do I Put a new hard drive in

hi,
I love my 6 year old computer but i thought i would give it an update and put a new hard drive because its been a good computer for these 6 year BUT i cant get into it because its got a metal cage on it
Please Help
My Mac Needs YOU!!!
iBook G3 333Mhz Mac OS 9.0.x Original iBook! (the Best)

Hello Little KZ.
Here is a link to a website of guides which teach you how to upgrade and repair Apple Laptops.
http://www.ifixit.com/Guide/
The guide you actually want
http://www.ifixit.com/Guide/Mac/iBook-G3-Clamshell/HD-Replacement
Its quite easy but make sure you get the right tools first.
You need a T8 Torx driver ($8 from your local Dicksmith electronics store)
The 5mm nut driver comes as part of set and if your lucky you might get a T8 Torx driver with it. ($22 from your local Bunnings warehouse)
Make sure you download the guide and print it out so you can use the convient screw guide.
Your new hard drive will be a lot more quite and faster.
The particular hard drives that you need (if you don't have one that isn't compatible already) is here
http://www.ifixit.com/cart/customer/home.php?cat=7
Good luck and take care, when I did it on my other iBook 300mhz. I cut my self quite bad trying to put the uppercase back on. (my finger sliped and hit the metal spikes below the sign which teaches you to install a ram card and AirPort card)
Enjoy your new Hard drive, Good luck.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Could not see my photos after Installing new internal drive

Aaarrgghhh! I installed a new internal drive to keep data separate from applications, transferred all the data to the new drive and now all the work I did in sorting thousands of photos has gone, same with iTunes. Does anytone know how to restore my categories of photos and tunes?
thanks

Before anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Backing up images on external hard drive and restoring to new internal driv

I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
RB

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on external drive. I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive. Is this going be a problem?

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac. This would save having to transfer several hundred GBs of data. Will this work using Set Up Assistant?

Your user account on the new Mac must have a different UID than on the old one. See the pink box in Problems after using Migration Assistant for an explanation.
You'll need to change the permissions on the iPhoto library on the external HD. Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password.
Then click the plus sign, select the user account you want on the next screen, and click Select. Then change Read only to Read & Write for that user via the little arrows. Finally, click the "gear" icon and select Apply to enclosed items. That may take a few mintutes on a large library.

Apple put a new hard drive into my MacBook Pro and updated the system to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. Why and what am I supposed to do?

Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?

cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome.

Best way things to put on new internal drive

Similar Messages

Maybe you are looking for