Best way to apply mono effect to stereo track?

I have a bit of guitar gear that generates a stereo signal that I want to use. I can record it into a stereo track no problem. But I would also like to use effects like Channel EQ on it.
Is there any straightforward way to apply a Channel EQ or other mono effect to both sides of the one stereo track? I seems like that would be a common enough thing to do for Logic to have a mechanism for it...
I know that I could just record the stereo signal onto two mono channels, but then that becomes a hassle grouping them and keeping other settings synchronized, etc.

Never mind. I just figured out that since I had selected one of the built-in electric guitar channel strips (as a starting point) that the effects in the menu were all mono. I reset the channel strip settings and then Channel EQ (and others) are now showing as stereo in the menu. Great!

Similar Messages

  • Best way to apply same effect to multiple clips?

    I have a bunch of short clips in the timeline. I want them all to end with a "fade to black" and I want the audio to fade to 0 db. I know how to do this by applying the "fade to black" and then applying 1/2 a crossfade 0db. Is there a way to apply these two effects to several clips at once? How do I apply the audio and video effects together to a single clip with one move?

    create the effect using the opacity and volume overlays on one clip in the timeline, then right-click and copy. Select (ie highlight) the other clips you want, right-click any of them and choose 'paste attributes'. From the pop up you'll want to check the relevant options, opacity and audio levels, and that's it.

  • What's the best way to apply a detuned effect to a piano (audio or midi)?

    Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
    Thanks

    Are you looking for a Honky Tonky Piano effect?
    you need two istances of the same piano (exs24 Logic patch are great)
    use fine detune (pitch) only one of the two piano istances.
    G

  • The best way to apply Themal Grease

    In your opinions, what is the best way to apply thermal grease when using an aftermarket heat sink for CPU cooling?
    Is it best to apply the grease to the heat sink (taking a chance of it smearing across the CPU) or apply directly to the CPU in the correct area and then placing the heat sink on the CPU?
    I ask because I have never tried an aftermarket heat sink before and don't want to screw things up
    Thanks guys for all the help

    well the reason ask is because the last time i tried it on the heat sink and stuck the heat sink on the cpu, the grease gooped over to the other parts of the cpu it's not supposed to be on.  so i removed the heat sink, cleaned everything up and then applied to the cpu on the die, smoother it out and stuck the heat sink on and clamped it down.  when i removed the heat sink, it look all nice and pretty and not sloppy.
    didn't know if you guys had any other ideas.  of course, i didn't know how much actually needed to be applied.  so i'm thinking i might have put too much on in the first place  

  • Best way to apply the patch

    Hello,
    Could someone tell me what's the best way to apply the
    patch?
    Should I install create the database after I use the patch?
    Thanks!
    John
    null

    Hey,
        The Best way would be:
    Apply the patch on the secondry one first and then on the primary box.
    You dont really need to make any box a stand alone one. You can apply the patch in the ditributed enviorment.
    One more thing:
    If you apply the patch on the primary box and then perform replication.It WILLNOT replicate the patch on the secondry box.
    Here is the procedure:
    Steps to apply the patch
           Issue the following "acs patch" command in the EXEC mode to install the ACS patch:
           "acs patch install patch-name.tar.gpg repository repository-name"
           ACS displays the following confirmation message:
            Installing an ACS patch requires a restart of ACS services.
           Would you like to continue? yes/no
           Enter yes.
    Please ensure that you use FTP server. Donot use TFTP as its not supported.
    Regards
    Minakshi
    Do rate the helpful posts:)

  • Best way to apply Schemas to Fragments

    I'm been researching the best way to apply schemas to my fragments.   Either by applying all fragment and field schema elements to the form
    or to put the fragment schema elements within the fragment.   I feel keeping a schema within the fragment seems like the way to go, but
    unsure.   I you only reference a fragments schema in a form and a fragment within that form changes, do you have to go back a modify every form schema that is using that fragment?  If I keep the schema in the fragment then I would only need to modify the fragment schema..correct?
    Wow..hope this makes sense.

    I agree with the small caveat that it sort of depends on the business/technical requirements surrounding your use of fragments.  Fragments can be sort of flaky and difficult to work with so to peg a specific all-encompassing "best practice" would, in my opinion, be impossible.  Using relative bindings in fragments is great (in fact it's what I'm doing on my current LC project), but it ends up becoming a bit limiting.  It can make the fragment pretty tightly coupled to the "main" XDP form and whatever schema/XML is bound to it.  Probably 9 times out of 10, that's not an issue, but the reasons for electing to use fragments can make it something you really need to think about.
    My advice would be to avoid fragments unless you specifically need that functionality for a specific reason.  It's easy to use fragments because they are cool and seem clean, but then can end up causing more headache than it's worth.  On the other hand, using fragments as a method of compartmentalizing script objects is really really helpful.  It helps you keep all your JavaScript inside script objects (instead of inside object events) and allows for reuse of scripts in different areas of the form(s).  This saves development time, refactoring time, and disk space.  I highly recommend looking into that scenario whenever possible.
    Hope this helps.
    Ryan D. Lunka
    Cardinal Solutions Group
    [email protected]

  • How do I apply special effects to a track when I keep getting error message that "Could not find layout Default Reverb GB"?

    How do I apply special effects to a track in GarageBand when I keep getting error message that says"Could not find layout Default Reverb GB"?

    I go to  Applications to see if
    GarageBand has changed and dthere is no change, still 1.42GB of file size ‹
    no evidence of the 10+ GB that the installer told me I was downloading, no
    evidence in my download folder that I downloded anything, and most
    important, when I click on ³Effects² I¹m back to the same error  message.
    I¹ve been at this now for about 3 hours.
    Downloading the extra content will take a very long time.
    When the download has finished, the prompt for the password will appear and the installer will continue to run in the background.
    Let t run. As long as GarageBand is still installing, it will give a warning, when you try to quit.
    When you can quit GarageBand without a warning, restart your Mac.
    The size of the GarageBand application will not change, but you should be seeing more loops. They are installed in the System Library, and the folder "Library" on your Macintosh HD should by now be 10GB larger.

  • Best Way To Apply Protective Plastic/Shield

    I bought the Power Support Crystal Film today for my (yet to be opened) iPhone. So before I open it, which will be later tonight, what's the best/effective way to apply the protective plastic on the iPhone LCD? Please advise. As I don't want to get any air bubble or small dust specks underneath the plastic.
    This is the link to what I bought: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=479 E6BBB&fnode=home/shopiphone/iphoneaccessories&nplm=TN612LL/A
    Thanks in advance

    When I first bought my iPhone back in June I bought a protective case for it... but it was too bulky to fit in my front pocket... and it took away the "bling" effect of the phone. A few days later I decided to ditch the case... and have had no protection since. The phone looks as new as it did the day I bought it. Mind you I don't put anything else in the same pocket.
    Think about it... would you buy a Cadillac and then go to Wal-Mart's Auto department to dress it up?

  • Best Way to Export After Effects File and Save Transparency

    Hi all-
    A pretty simple question. I need to export a file from After Effects and keep the alpha channel so I can superimpose it on some video in FCE. What is the best way to export it?
    I recall hearing people mention that the Animation Codec with "Millions of Colors+" is the best way to go about doing it, in which case I'd just have to render it within FCE. Is that correct? If so, are there any other settings I should tweak to get a high quality file that will work with FCE?
    Thanks.

    Hi -
    Animation Millions+ will deliver an extremely high quality file with the alpha channel. You will need to render once in FC.
    Hope this helps.

  • Best way to watch a movie with stereo headpho

    What is the best experience I can get from watching a movie using standard stereo headphones. I realize I need to test with my ears but I ask because I might need to buy cables. I have the X-fi Platinum with the console. I use a standalone dvd player to watch on my tv. The sound is currently sent to my stereo where I use headphones and was thinking of sending the sound to my X-fi and using the headphones there. Should I use a digital connection for 5. from the dvd player to the X-fi?. Will cmss utilize true 5. signals or will the signal just be wasted. Does cmss only upmix stereo signals?Basically, can I get a decent surround experience while watching a movie with a surround soundtrack on stereo headphones and what is the best way to set that up. My cheap Coby?standalone ?player decodes Dolby and DTS if that matters?Thank youTrenzMessage Edited by trenz on 0-4-20070:53 PM

    Hi
    both ways would work, and I'm not sure which one to recomend.
    Importing image by image wouldn't be so hard, and could give
    you the advantage of being able to even ad interactivity like
    moving layers or fading them and and and...
    Making a flv and a slider is maybe a bit easier (btw i made a
    sample some days ago I could provide you with if needs be), but not
    as flexible.
    Filesize will be an issue, and I guess the flv is bettr in
    that respect, but compression might damage the quality, wich might
    also be of importance.
    Importing all as pngs with trancparencie might lead to other
    issues, as discuessed here in a recent thread about pngs (the
    number of png that can be stacked one over an other is limeted but
    it seems the information about numbers is inconasistent,one of the
    programmers of flashplayer talked about 24...)so there might be an
    issue there.
    But I think ist's a great idea, and it is doable in either
    way, maybe it's wise to make sone test with - say 10 layers and
    decide then which way to go for the rest.

  • Is there a way to apply sound effect to each application?

    Hello, I use x-fi surround 5.1 usb and windows 7-64bit.
    I like to play Elder Scrolls: Skyrim with stone hall EAX effect and winamp playing other mp3s.
    Is there a possible way to apply EAX only to Skyrim game and not winamp?
    It seems that no thread is talking about this issue. I really appreciate if someone gives me directions or hints.

    Hi,
    Sorry I don't think that is possible. EAX effects applies to all sounds when it is enabled.

  • Wat is the best way to apply NLS during Upgradation?

    Dear All,
    I am currently upgrading our EBS 12.1.3 application to 12.2.3
    We have several NLS languages (Spanish, Hebrew, German..)
    After installing EBS 12.2.0 in Upgrade mode, I have applied the american driver and Online help.
    As the status of the NLS languages are "Installed", I have applied the NLS patches of AD, TXK, 12.2.0 and Online help.
    Is this a correct approch of applying NLS patches ?
    Thanks in advance.
    Kind Regards,
    B S

    Hi Raj kumar
    Best way is use of LDB's. Which will check all authorization and all data releated to current date ie latest date. Best use LDB if not atleast use FM EMPLOYEE_CHECK_AUTHORIZATION. This is just a sample example fm i am giving. Similar lot of FM's are available.
    Best way is LDB's.
    Regards
    vijay

  • Best way to put 3D effect on logo?

    I am using FCP Studio and on most video I work on there is some sort of 3D fly in of the companies logo at the beginning of the video. when I was using Pinnacle Liquid, I would just add a 3d effect to the logo and adjust the parameters inside the effect. Now on FCP, what is the best way to animate a logo? Do I add a "Basic 3D" filter in the Perspective folder in the effects menu? This seems a little clunky because you have to go to different tabs (filter and motion) to do the adjusting. Would I want to use motion for this? Sorry if these are simple questions, but I am just getting up to full speed on FCP.
    Thanks for the help!
    John Schenkel

    Hi John,
    Basic 3D will give you a 3D motion (x,y, and z space) but there is no depth to the object.
    Boris Title 3D will give you the ability to fake depth but if you move the object around it's still 2D.
    If you're looking for a fly in you should explore After Effects, Boris Grafitti, Zaxwerks, or 3D Studio Max.
    I'm hopeful Apple will include some sort of simple 3D titling or objects in the next version of FCP or Motion.

  • Best way to apply Invisible shield + tips????

    Hello, I got a 5Gen iPod and i want a cover that dosent cover up the iPod's "coolness." So i got the clear one. When I put it on the front, I was struggling, it was very hard to apply. Because i kept getting these huge air bubbles and i got really mad. So i kept taking it out and reapplying, and its just got worse and worse, more bubbles each time.
    Then i heard about using some sort of card to use, is that very useful? Then i searched around the forums, and heard about using soap? What is that soap for? Whats the best way to put it on? Without bubbles, dust, and all that stuff + good tips ???????????????????????

    I put one on my 60gb 5g a week ago and it was so much easier than I thought it was gonna be. So I ordered up some more for my girlfriends 30gb 5g and my kids Nanos.I just put the other 3 skins on tonight. And I didnt have any problems at all. Are you using the application spray that came with it? You have to use some kind of application spray. If you didnt get any its easy to make yourself with water, a drop of dish soap, and some alcohol. Did you watch the demo on their site? If not, try this link http://www.shieldzone.com/movie/install.html
      Windows XP Pro   Black G5 60gb Video

  • Best way to apply Support Packages to Solution Manager

    We have a single instance dual stack for SOLMAN 4 running. I want to apply Suppot packages, I need some suggestion what would be the best way to do this, the way I am thinking to proceed for this is -
    1. Do kernel and igs upgrade thru JSPM
    2. Apply ABAP Support packages and then,
    3. apply JAVA support packages
    Is it possible to apply ABAP support packages with JSPM?
    Any suggestion would be helpful

    Patch your abap stack first then the java...
    No, its not possible to pacth abap with JSPM (JAVA Support Package Manager)
    Regards
    Juan

Maybe you are looking for