Best way to apply Support Packages to Solution Manager
We have a single instance dual stack for SOLMAN 4 running. I want to apply Suppot packages, I need some suggestion what would be the best way to do this, the way I am thinking to proceed for this is -
1. Do kernel and igs upgrade thru JSPM
2. Apply ABAP Support packages and then,
3. apply JAVA support packages
Is it possible to apply ABAP support packages with JSPM?
Any suggestion would be helpful
Patch your abap stack first then the java...
No, its not possible to pacth abap with JSPM (JAVA Support Package Manager)
Regards
Juan
Similar Messages
-
I can't find any support package for Solution Manager 4.0
I can't find any support package for solution manager at
Support Packages and Patches - > SAP Technology Components
SAP Technology Components
GATEWAY
JAVA LOG VIEWER
SAPCAR
SAP EXCHANGE CONNECTOR
SAP CR CONTENT
SAPROUTER
SAPSECULIB
SAPSSOEXT
I'm searching it at a wrong place?You´re at the right place - but your user doesn´t seem to have permissions to download them.
You have a license for Solution Manager?
Markus -
Error in xpras when importing support packages in solution manager
Hello,
We are importing support packages in our solution manager and we begun
the process more than two weeks ago and the process is still running.
I have stopped the system and restarted the import again, but it seems
to be the same. The SP queue is:
SAPK-1507EINSTPL
SAPK-1507FINSTPL
SAPK-1507GINSTPL
SAPK-1507HINSTPL
SAPK-1507IINSTPL
SAPK-1507JINSTPL
SAPKB70015
SAPKA70015
SAPKITL426
SAPKIPYJ7F
SAPKW70017
SAPKU50012
SAPKB70016
SAPKA70016
SAPKITL427
SAPKIBIIP9
SAPK-40012INCPRXRPM
SAPK-40013INCPRXRPM
SAPK-40014INCPRXRPM
SAPKNA7012
SAPKNA7013
and there is an error (rc=12) at the method execution step in package SAPKU50012 or in SAPKB70016.
Now, there is an rc 12, but the queue is running, the import queue hasn't cancelled, but it seems to do nothing. The RDDEXECL job log is:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server crosol203 were synchronized
Error Building the ENH TreeObject Type:XHObject Name:EH_FJ_FUBA_PARA_VERS
the job was running for 149.332 seconds and at that moment I stopped the sap system. After restating the system I imported the queue again and now, the process has been running for more than 13500 seconds.
We have checked note number 1142410 and all the modifications were already implemented in the system.
Thanks and best regards,
Ana.Hello Sunny,
The problem is still happening. I have read and apply all the threads you suggested, nut they didn't resolve the problem:
I have updated the kernel
I have checked table DRSEG and it has no problems.
I don't have any syntax errors so I haven't run the SGEN as I think it doesn't apply.
After changing the kernel I have started the sap system and the job rddexecl has started itself before running again the SPAM and reimporting the queue.
I already have 6 support packages without running the method execution step and I don't know how much time it will consume.
Regards,
Ana -
What is the best way to apply Support Pack Stacks among satellite systems
Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.PThanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this. -
How to download support packs from solution manager
Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
RegardsPlease check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark -
Support pack through solution manager
Hello,
Please provide the document /link to download/apply support pack through solution manager.
Thanks
KailashHi,
1. You will have to implement MO (Maintenance Optimizer) in SOLMAN.
2. Check with http://service.sap.com/Solutionmanager.
3. http://service.sap.com/notes --> OSS note no is 1134872 Maintenance Optimizer: FAQ of stack delta files in EPS
4. http://help.sap.com --> Search for Maintenance Optimizer.
Regards,
Srini Nookala -
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614 -
Hello,
Could someone tell me what's the best way to apply the
patch?
Should I install create the database after I use the patch?
Thanks!
John
nullHey,
The Best way would be:
Apply the patch on the secondry one first and then on the primary box.
You dont really need to make any box a stand alone one. You can apply the patch in the ditributed enviorment.
One more thing:
If you apply the patch on the primary box and then perform replication.It WILLNOT replicate the patch on the secondry box.
Here is the procedure:
Steps to apply the patch
Issue the following "acs patch" command in the EXEC mode to install the ACS patch:
"acs patch install patch-name.tar.gpg repository repository-name"
ACS displays the following confirmation message:
Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Enter yes.
Please ensure that you use FTP server. Donot use TFTP as its not supported.
Regards
Minakshi
Do rate the helpful posts:) -
Best way to apply Schemas to Fragments
I'm been researching the best way to apply schemas to my fragments. Either by applying all fragment and field schema elements to the form
or to put the fragment schema elements within the fragment. I feel keeping a schema within the fragment seems like the way to go, but
unsure. I you only reference a fragments schema in a form and a fragment within that form changes, do you have to go back a modify every form schema that is using that fragment? If I keep the schema in the fragment then I would only need to modify the fragment schema..correct?
Wow..hope this makes sense.I agree with the small caveat that it sort of depends on the business/technical requirements surrounding your use of fragments. Fragments can be sort of flaky and difficult to work with so to peg a specific all-encompassing "best practice" would, in my opinion, be impossible. Using relative bindings in fragments is great (in fact it's what I'm doing on my current LC project), but it ends up becoming a bit limiting. It can make the fragment pretty tightly coupled to the "main" XDP form and whatever schema/XML is bound to it. Probably 9 times out of 10, that's not an issue, but the reasons for electing to use fragments can make it something you really need to think about.
My advice would be to avoid fragments unless you specifically need that functionality for a specific reason. It's easy to use fragments because they are cool and seem clean, but then can end up causing more headache than it's worth. On the other hand, using fragments as a method of compartmentalizing script objects is really really helpful. It helps you keep all your JavaScript inside script objects (instead of inside object events) and allows for reuse of scripts in different areas of the form(s). This saves development time, refactoring time, and disk space. I highly recommend looking into that scenario whenever possible.
Hope this helps.
Ryan D. Lunka
Cardinal Solutions Group
[email protected] -
MAM Not Working After Applying Support Package
We have been lived with MAM 2.5 with SP16 for almost a year now. We recently applied support package 19 for ABAP and J2EE stacks but MAM stopped working right after that. To fix the problem we had to do the following steps:
1. Disable all SyncBO
2. Regenate all SyncBO
3. Run Replicate Database
4. Enable all SyncBO
5. Delete MAM 2.5 client by WebConsole for all PDA (over 100 devices)
6. Re-Assign MAM 2.5 client back to PDA from WebConsole
My question is do we have to perform those steps above every time we are applying new support package? If it is a case, it's very time consuming because we have to manually perform step 5-6 for every users.
Does anyone have seen or experience this scenario before? Your comment is highly appreciated.
Regards,
Dai LyHi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly -
DDIC_ACTIVATION ERROR WHILW APPLYING SUPPORT PACKAGES
Hi all,
While applying support package(KB62019),i got error(DDIC_Activation)..
How to resolve it?
Thanks in advance.Hi,
Which support package are you applying ? Have a look at these notes: 782140 and 447925.
Search for SAPKB62019 in this note and you will get a solution to that. The note refers to some more notes. Please follow the instuctions in the note carefully.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Syntax Error while applying support package stack 8
I get the following short dump while I was applying support package stack 8. I'm at the latest saint version 34
Runtime Errors SYNTAX_ERROR
Date and Time 23.07.2009 14:09:27
Short text
Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLSCR2" had to be interrupted because it con
a statement that cannot be executed.
In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
errors occur:
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program
CL_DYNPRO_PROPERTY_BAG========CP :
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Trigger Location of Runtime Error
Program SAPLSCR2
Include LSCR2U47
Row 31
Module type (FUNCTION)
Module Name RS_SCRP_PROP_ADD_TO_PROP_LIST
1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" REFERENCE(P_TEXTFIELD) TYPE D021S-FNAM OPTIONAL
6 *" REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE CHAR3 OPTIONAL
7 *" REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE D021S-FNAM OPTIONAL
8 *" REFERENCE(P_KEEPTAB) TYPE SEU_BOOL OPTIONAL
9 *" REFERENCE(P_DISABLEIMPLICITLABELS) TYPE SEU_BOOL OPTIONAL
10 *" REFERENCE(P_BARCODEINPUT) TYPE SEU_BOOL OPTIONAL
11 *" CHANGING
12 *" REFERENCE(P_PROP_LIST) TYPE PROP_LIST
13 *"----
14
15 data: l_prop type prop_line,
16 l_prop_list type prop_list,
17 l_string type prop_str.
18
19 * Property TextField
20 * -
21
22 if p_textfield is supplied.
23 clear l_prop_list.
24 clear l_prop.
25 l_prop-name = sprop_c_tag_textfield_name.
26 l_prop-syntax = sprop_c_syntax_content .
27 l_prop-value = p_textfield.
28 append l_prop to l_prop_list.
29 * Zusammensetzen eines Strings der Form
30 * <Name>value_1</Name> ... <Name>value_n</Name>
>> call method cl_dynpro_property_bag=>fill_prop_list_into_properties
32 exporting
33 prop_list = l_prop_list
34 importing
35 properties = l_string.
36 * Property-Eintrag zusammensetzen
37 clear l_prop.
38 l_prop-name = sprop_c_tag_textfield.
39 l_prop-type = sprop_c_type_string.
40 l_prop-syntax = sprop_c_syntax_content .
41 l_prop-value = l_string.
42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
43 read table p_prop_list transporting no fields
44 with key name = l_prop-name.
45 if sy-subrc = 0.
46 modify p_prop_list index sy-tabix
47 from l_prop.
48 else.
49 append l_prop to p_prop_list.
50 endif.
Can anyone help me? I now get the same error with executing other transactions as well.Hi,
Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
Regards,
Varadhu -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
The best way to apply Themal Grease
In your opinions, what is the best way to apply thermal grease when using an aftermarket heat sink for CPU cooling?
Is it best to apply the grease to the heat sink (taking a chance of it smearing across the CPU) or apply directly to the CPU in the correct area and then placing the heat sink on the CPU?
I ask because I have never tried an aftermarket heat sink before and don't want to screw things up
Thanks guys for all the helpwell the reason ask is because the last time i tried it on the heat sink and stuck the heat sink on the cpu, the grease gooped over to the other parts of the cpu it's not supposed to be on. so i removed the heat sink, cleaned everything up and then applied to the cpu on the die, smoother it out and stuck the heat sink on and clamped it down. when i removed the heat sink, it look all nice and pretty and not sloppy.
didn't know if you guys had any other ideas. of course, i didn't know how much actually needed to be applied. so i'm thinking i might have put too much on in the first place -
What's the best way to apply a detuned effect to a piano (audio or midi)?
Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
ThanksAre you looking for a Honky Tonky Piano effect?
you need two istances of the same piano (exs24 Logic patch are great)
use fine detune (pitch) only one of the two piano istances.
G
Maybe you are looking for
-
How to pass parameters to JasperReports from Java Code !!
Hi all I m working on existing project and struck with a little problem. Though i have created report using iReport tool but i dont know how to integrate my reports with java code and pass suitable parameters. Note : To answer this knowledge of jaspe
-
Spool to PDF output in application server
Hi Experts, I have a problem with converting spool to PDF. If I download the spool to presentation, the outputs is fine, BUT when I download it to application server and try to view it in al11, a set of characters comes out and if I try t
-
Viewing iPhoto Library in Finder
I have just upgraded to a new iMac and have transferred all my files, settings & applications from my old iMac. The old machine had MAC OS X 10.4.11 and the new machine has 10.5.5 When using my old machine in Finder I could go to Pictures/iPhoto Libr
-
Why do I get an error page when I select Toolkit for CreateJS? I am using CS6 Flash Pro.
-
Screen Capture Program Run Off of a Flash Drive
I am looking for a screen capture program that I would either be able to run off of a flashdrive, or something that I can easily move from computer to computer whenever I need it. I do high end video work for a University and I am constantly being as