Best way to archive DV and HDV to hard disk

Hi,
I have 10's of DV tapes and HDV tapes from which I plan to make several projects (mostly highlight movies, with several minutes from each tape on average). I would like to put most or all of my raw footage on my hard drive (large firewire drives) for easy access during production of the projects, and also as a backup for the DV tapes. What is the best lossless, or nearly lossless, way to save these tapes? What would be the approx. disk space needed per 60 minute DV tape and 60 minute HDV tape (from a Sony HDR-HC3 camera in HDV mode)?
Thanks much in advance,
dave

Welcome to the  Discussion Forums.
Your best option to archive the tapes would be to keep them on tape, store them in a dry, dark place and turn them every 6 months.
If you import DV to HD it will take approximately 13 GB per hour, when you import HDV it gets converted to AIC which will take up around 35 GB per hour.

Similar Messages

What is the best way to archive old footage (DVD, VHS, Super 8 etc.)

Hello,
I am starting a huge archiving projet of possibley 100-200 hours of footage from all kinds of sources (VHS tapes, Mini DV, Super 8 film).
What is the best way to archive this footage at the highest possible resolution?
What sort of file should be saved?
Im a complete starter at this.
Thank you!

One strategy is to purchase a Canopus ADVC300 analog/dv converter. It has a TBC incorporated.
You connect your original source material (for example - VHS deck) to the Canopus via analog cables then from the Canopus via firewire to your computer. This will turn everything into DV format.
Play the tape through the canopus and record to your hard drive.
Take good notes for each tape. Create a logging sheet and make notes as the system captures.
Once you have the tapes in the computer, break them into 1 hr or less segments by some reasonable system - chronologically, by personalities, locations or whatever makes sense to you.
Then write out each 1 hour segment back to a DV recorder. Give each tape a unique reel number - and make the reel number part of the file name on the computer.
When you are done in a year or two ( lol ) you should have two matching sets of material - one on the hard drives and one on tape - with names that make it easy to cross reference and a binder full of logging information. If you want to be fully digital, look into a nifty application like CatDV. It will help organize a mass of video info like this.
DV runs at ~13-14GB/ hr. Plan you storage accordingly.
Purchase professional quality DV tapes - not drugstore junk.
Good luck.
x

What is the best way to archive your photos?

My computer has gotten very slow, and I want to take my thousands of pictures off. What is the best way to archive them?

EtreCheck version: 1.9.11 (43) - report generated May 29, 2014 4:13:51 PM EDT
Hardware Information:
          iMac (20-inch, Mid 2007)
          iMac - model: iMac7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          ATI,RadeonHD2600 - VRAM: 256 MB
System Software:
          Mac OS X 10.7.5 (11G63) - Uptime: 0 days 0:8:11
Disk Information:
          WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    My Hard Drive (disk0s2) / [Startup]: 319.21 GB (100.73 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Western Digital My Book 1110 999.5 GB
                    disk1s1 (disk1s1) <not mounted>: 32 KB
                    My Book (disk1s3) /Volumes/My Book: 999.37 GB (411.64 GB free)
          Apple Inc. Built-in iSight
          Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
Kernel Extensions:
          [not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) Support
          [not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) Support
          [not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) Support
          [not loaded] com.RemoteControl.USBLAN.panther (1.6.1) Support
          [not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) Support
          [not loaded] com.belcarra.iokit.netpart.panther (1.6.1) Support
          [not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) Support
          [not loaded] com.sony.driver.prs (1.0.0d1) Support
          [kext loaded] com.symantec.kext.SymAPComm (11.2.2f3) Support
          [not loaded] com.symantec.kext.confidentialData (1.4f5) Support
          [kext loaded] com.symantec.kext.filesecurity (1.4.3f19) Support
          [kext loaded] com.symantec.kext.fw (1.0.3f5) Support
          [kext loaded] com.symantec.kext.internetSecurity (1.3.2f5) Support
          [kext loaded] com.symantec.kext.ips (1.3.1f7) Support
          [kext loaded] com.symantec.kext.pf (4.2.1f7) Support
Startup Items:
          HP IO: Path: /Library/StartupItems/HP IO
          HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [loaded] com.symantec.avscandaemon.plist Support
          [running] com.symantec.deepsight-extractor.plist Support
          [running] com.symantec.diskMountNotify.plist Support
          [running] com.symantec.MissedTasks.plist Support
          [loaded] com.symantec.navapd.plist Support
          [running] com.symantec.navapdaemonsl.plist Support
          [loaded] com.symantec.Sched501-1.plist Support
          [running] com.symantec.sharedsettings.plist Support
          [running] com.symantec.symdaemon.plist Support
          [running] com.symantec.symSchedDaemon.plist Support
Launch Agents:
          [running] com.sony.ReaderLibrary.ReaderLibraryLauncher.plist Support
          [not loaded] com.sony.ReaderLibrary.RunReaderLibrary.plist Support
          [running] com.symantec.uiagent.application.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.google.keystone.agent.plist Support
User Login Items:
          iTunesHelper
          AirPort Base Station Agent
          SmileboxTray
          LOGINserver
          InstUtilLaunch
          HP Scheduler
          SymSecondaryLaunch
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
          AdobePDFViewerNPAPI: Version: 10.1.10 Support
          AdobePDFViewer: Version: 10.1.10 Support
          DivXBrowserPlugin: Version: 1.4 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 Support
          QuickTime Plugin: Version: 7.7.1
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
          iSightAudio: Version: 7.7.1 - SDK 10.7
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.3 - SDK 10.7
User Internet Plug-ins:
          Move-Media-Player: Version: npmnqmp 07076003 Support
          fbplugin_1_0_3: Version: (null) Support
          Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes:
          DivX Support
          Flash Player Support
          Flip4Mac WMV Support
          Norton\nQuickMenu Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          mds
               1%          WindowServer
               1%          WebProcess
               0%          NortonAutoProtect
               0%          Mail
Top Processes by Memory:
          684 MB          NortonAutoProtect
          82 MB          WebProcess
          80 MB          Mail
          68 MB          Safari
          45 MB          mds
Virtual Memory Information:
          71 MB          Free RAM
          1.17 GB          Active RAM
          536 MB          Inactive RAM
          243 MB          Wired RAM
          279 MB          Page-ins
          760 KB          Page-outs

Best way to archive a finished movie? Take 2

Hi, I need to clear off the captured video for several projects off my hard drive, and close out those FCE projects. What is the best way to archive my finished movie? I thought it would be to create a 'self-contained' Quicktime file, but learned that if I want to import such a file into DVD Studio Pro, it won't work. Should I save the movie as a 'self-contained' Final Cut Express Movie file (which will import into DVDSP) or is such a file inferior to a Quicktime .mov file? Or is there some other option?
Thanks, Bob

Thanks for your reply. I've been experimenting and here is what I found.
Yes, iDVD does import a Quicktime file, but DVD Studio Pro doesn't. Go Figure. DVDSP gives an Alert Box that says, "Incompatible Format". (FCE will import either a Quicktime file or a FCE Movie File.)
I saved a short movie (about a minute and a half) both as Quicktime file and FCE Movie file. Both are 'self-contained'. Interestingly, the (highest quality) Quicktime file is only 163 MB while the FCE Movie File is 304 MB.
So they are not the same. I would tend to think that the FCE file is better for archiving, assuming that the larger size (304 MB) means better quality. But, on the other hand, it seems that a Quicktime file is something that is more universally used. For instance, I may want to send a file to be used by someone who doesn't have Final Cut.
Confused, Bob

[CS4] Best way to mix HD and SD?

Hey guys, had some fantastic reading here that's done me a lot of good. Hopefully someone can help me out here.
Here's the scoop - I'm working on a documentary, and we're currently trying to find the best way to mix HD and SD footage so that it's best presentable. Everything was shot on DV/HDV, so before we waste all the time capturing just to find out there are better ways to go about it, we wanted to see what others have done. Essentially, our narrative clips (think Masterpiece Theatre) are shot in HD, and we're using a lot of still images at a high enough resolution to work in HD. Only thing is, a lot of our interview clips are shot in SD, but in 16:9 so at least aspect ratio is the same.
What would be the best way to go about this for consistent video quality? Would you recommend capturing everything in its native format, upscaling the SD footage as best as possible and exporting as HD? Bringing down the quality of the HD footage upon capture and just editing/exporting everything as SD? If you'd recommend upscaling, any advice on how to go about that? Appreciate all the help!

Curt,
I have never beaten him, though I do try often. Job well done!
Now, if that lottery ticket is the big winner, the forum will suffer, as you head off to spend your $'s.
Hunt
PS - I agree with you both.

Best Way to Archive

Best Way to Archive
There are lots of posts re archiving video projects, but I can’t find info about the best way to archive still images used in projects. . . .or not used in projects, for that matter. I just wasted a bunch of time (again) searching for a still I need. No matter that I try to label photos literally and/or chronologically, this keeps happening.
Anyone know of a site that would help or where I might get some suggestions as to the best method to go about this? Would be most grateful.
pat

Piero
Nearly all photos I use in a project are put through Photoshop first. . . . .lighting isn't quite right, some photos get merged with another, background gets dropped out, etc.
Problem comes when I put all the versions of a photo into a folder, usually part of a larger project folder. (I don't keep all this in iPhoto.) Later, maybe a year down the line, I need a photo but end up searching bunches of folders looking for it. Naming things as literally as possible hasn't helped. Generic sort of shots (a sunset, good ocean shot, etc) are the worst.
I may try a larger search of the web for articles about efficient organization of this kind of thing.
Thanks so much for the reply. Appreciate it.

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Best Way to Stack 2d and 3d in a Composite

Hey everyone, it seems I'm really on a 3d binge with Photoshop CS6. It's just a blast! Anyway, I'm looking to figure out the best way to stack 2d and 3d items together in the same document, and maximize the editibility...
I'm working on a digital room setting, and I have part of the room in 3d and part in 2d. So, for example, the walls, ceiling, floor, table, chairs and corner hutch are 3d, but the regular hutch and buffet server are in 2d.
- The table and chairs need to be in the foreground
- The regular hutch and server are behind the table and chairs
- The corner hutch needs to be behind all other pieces of furniture
So, you may be catching on by now to my little dilemna... I want all the 3D items to have the same lighting and reflect off one another, however, I need the 2d layers to somehow fit "inbetween" the 3d objects. The simple question is, how can this be done? Is there a way to mask the foreground 3D objects so that they appear to be in from of the 2D objects? My only current solution is this:
- Move the whole 3D layer (the scene layer) all the way to the back
- Make the final decision on the position of the table and chairs
- Hide all other meshes in the scene besides the table and chairs
- Render, so the edges are clean
- Load the newly rendered 3D layer as a selection (which loads the table and chairs only)
- Either create a new layer from the selection of the rendered 3D layer, or mask the 3D layer so that the table and chairs appear to be in the foreground
I didn't anticipate this post being this long, so I apologize,... but as you can assume, the method above means I can no longer edit/reposition/scale the 3D at all, so if there's a better way to stack these room elements I would be extremely grateful to whoever knows how!
Thanks!
Andy

First, I was wrong about layers needing to be hidden to prevent their appearance being included in a new Postcard. I misunderstood something that happened when working with a 3D document a while ago.
Materials support transparency/opacity. A material has an opacity control that can use a texture. The material opacity percentage is multiplied by the opacity of the texture.
When a Postcard is created, its default material's opacity control will contain an instance of the texture that's in the diffuse control, which is a PSB file containing the 2D layer (pixels, Shape, Smart Object or Group) from which the Postcard was created.
Here is an example. Two solid Pyramid meshes and a Postcard of a cloud Shape layer:
The Shape layer from which the Postcard was created is in the document that can be opened by picking Edit in the dropdown of the buttons highlighted above:

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to move data and programs to another profile on same Mac?

Hello,
What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
Thanks for your help!
Johnathon

This usually means that a configuration or preference file is corrupted. In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
See if the problem is resolved in the user's normal account.
It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved. The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

Air mobile best way to implement drag and drop

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

Hi all,
I'm developing an application which allows people to drag and drop certain panels.
But the dragmanager isn't optimized for the air mobile platform.
What is the best way to implement drag and drop at the moment?
Write it all yourself or are their some utility classes that can help?

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

Best way to backup Iphoto and Itunes?

I just purchased a 2TB Timecapsule and after reading addtional reviews I am reconsidering my purchase. What is the best way to backup iphotos and itunes? The idea of backing up the data wirelessly and seamlessly with time machine was a what encouraged me to purchase Apples solution. However I am seeing alot of TC's are dying after their warranty expires which is a deal breaker as I have a newborn and do not want to lose pictures.
My 2009 MBP memory is nearly full and my photos eat memory. I would like a solution that allows me to access previous photos etc without relying on the MBP HD in the event it is stolen, crashes etc.
The same holds true for itunes which I rarely use now that I have Spotify, however I do not want to lose my itunes catelog in two years either, but it would be great to have them off my MBP HD, but readily accessible if necessary.
The literature on purchasing cloud storage is pretty scarce (Icloud!?, Amazon?)
Any insight is greatly appreciated, and I am sure I will have followup questions as I need to resolve this soon now that I have a 2 week window to return the TC.
Thank you!

Welcome to Apple Discussions!
Presumably, the old iMac is pre-Firewire? If it is, it really would be very slow for backing up. You can use these methods to network the two machines on my FAQ:
http://www.macmaps.com/network9X.html

Best way to delete transcoded and proxy media?

Hello,
I am trying to free up some disc space and am curious what is the best way to delete transcoded and proxy media in fcpx? I know I can open up a library bundle and delete the folder, but is this safe? There must be a better option...
Thanks,
Austin

Austin Samuel wrote:
Hello,
I am trying to free up some disc space and am curious what is the best way to delete transcoded and proxy media in fcpx? I know I can open up a library bundle and delete the folder, but is this safe? There must be a better option...
Thanks,
Austin
I don't know of any other way.
Proxy and Transcoded media can always be re-generated if the original files are in place.
If this question refers to your system drive then a BIG suggestion is to aquire a fast dedicated media drive.
Al

Best way to archive DV and HDV to hard disk

Similar Messages

Maybe you are looking for