Best way to blog with multipel photos?

If I add a blog entry to my website about 100 times per year and I've put an image on each entry that can be clicked to link up to the days photos usually up to around 20 shots/blog entry. This creates a photo page each time. I'll end up with 100 photo pages if I continue to do this. Won't I run out of space before too long?
Should I be creating so many photo pages with only 10 or 20 shots on them?
Not sure how to set this thing up.
J

why not just put the photos into the actual blog people are clicking on? You can drag and drop photos into the space where you type and change their size too. Of course you can't get the slideshow option like on a photo page but this would make things easier.
Also You could try changing the hyperlink settings and putting more than one day on a photo page.
But I would defiantly go for the blog choice. I do this all the time on my personal website (not the one below), and save the photo pages for more permanent pictures.
I hope this helps a little, Good luck.

Similar Messages

How is the best way to deal with duplicate photos

I am using a new retina 27" iMac 16gb ram OS X 10.10.1
Aperture 3.6
What is the best way to deal with duplicates that get in Aperture Vaults
I have used Gemini and it finds duplicates, but I have no way of telling if the original are still there.
I don't want to go through 15000 photos to try to find the duplicate.
Thanks Charlie

You mean - one image in a vault, one in a library? Or duplicates in the same library?
Photo Sweeper can scan several libraries or folders at the same time and display the duplicates side by side to let you pick which to keep. You can define rules to mark photos for automatic deletion as well.
http://overmacs.com/photosweeper.html

What's the best way to create/stitch panorama photos with Aperture?

What's the best way to create/stitch panorama photos with Aperture?
Many thanks
Best

There is no way to do this with Aperture. This thread
https://discussions.apple.com/thread/3714693?start=0&tstart=0
has some suggestions.

Best way to merge two i photo libraries

I have ended up with two versions of i photo on the same laptop - just stored in different places. One has 30K photos and the other has 80K photos. What is the best way to merge the two photo libraries as whenever I try to do it - it ends up crashing.

no sure how you are doing it - the only way is to use the merge capability of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/
LN

What is the best way to work with Word documents in The InDesign CS4???

I work in Microsoft Word 2007 and all my documents have *.doc format.
What is the best way to work with Word documents in InDesign CS4???
David Blatner says to avoid copying and pasting text from Word instead of placing it (Ctrl+D).
How about pasting RTF or Text Document???
I want to make book's layout in ID CS4 and its main feature is that there is the left page with text and the right - with graphics.
So, as I understand to place the text on each page I must create for example 70 Word documents and place each item on 70 left pages???
It loks like wasting time. I sthere another way of making such layout??? What kind????

It's best to place any text.
You can have all of your text in one file and use auto-flow to add threaded text frames and pages as required (Hold down the Shift key when you click the loaded text cursor), but it's a little non-standard to have the thread only on one side of the spread from the auto-flow perspective, so you'll have to set up properly.
This is one case where a master text frame will work to your advantage. On your master page spread, add a text frame to the left page, but not to the right (or at least not threaded to one on the right -- for some other project you might actually want two independent text threads). Hold the loaded cursor over a frame on the left side of a document page and auto-flow. ID will add new spreads as necessary, but only put the text on the left side.
Peter

What's the best way to deal with floating point errors?

What's the best way to deal with the decimal number errors in Flex?
Lets say I have:
var number1:Number = 1.1;
var number2:Number = 1;
var result:Number = number1 - number2;
trace(result);
I get "0.10000000000000009".
What's the best way to deal with this so that i get the right result?
Using the trick: result = Math.round( result * Math.pow(10,13) ) / Math.pow(10,13); is not useful as such when using big numbers.
For example, If number1 = 100000000001.1, and number2 = 0.2, I get "100000000000.90001" as result. The previous rounding fixes rounding errors after 13th decimal, but here the first rounding errors come after 4 digits.
The toPrecision method in Number and NumberFormatter dont seem be of use by themselves because of the same reason.
So I'd have to check how big the number is, and then round the number based on that.
So far I've constructed a method that does that with logarithms like this:
public function floatFix(number:Number):Number{
      var precision:int = 14-Math.floor(Math.log(Math.abs(number))*Math.LOG10E);
      var precisionFactor:Number = Math.pow(10, precision);
      return Math.round(Number(number*precisionFactor))/precisionFactor;
It just seems rather odd that one would have to create and use something like that to just count 1.1-1; There's a lot of calculating in that method, and i'm guessing that having to use that in a loop could slow down a program quite a bit.
I think there really should be a pre-built method in flex for something like this, but I can't find any.
Anyone know any better/faster ways?

Use the application server database pooling services to create a datasource that can be access using JNDI.
Move the database access code to a Servlet so that a JSP submits a form to the Servlet that does the database access and packages the data into a bean which is passed to another JSP to be displayed.

Best way to deal with Mutating table exception with Row Level Triggers

Hello,
It seems to be that the best way to deal with Mutating Table exception(s) is to have to put all the trigger code in a package & use it in conjunction with a Statement level trigger .
This sounds quite cumbersome to me . I wonder is there any alternative to dealing with Mutating table exceptions ?
With Regards

AskTom has a good article about this,
http://asktom.oracle.com/tkyte/Mutate/index.html

What is the best way to deal with memory leak issue in sql server 2008 R2

What is the best way to deal with memory leak issue in sql server 2008 R2.

What is the best way to deal with memory leak issue in sql server 2008 R2.
I have heard of memory leak in OS that too because of some external application or rouge drivers SQL server 2008 R2 if patched to latest SP and CU ( may be if required) does not leaks memory.
Are you in opinion that since SQL is taking lot of memory and then not releasing it is a memory leak.If so this is not a memory leak but default behavior .You need to set proper value for max server memory in sp_configure to limit buffer pool usage.However
sql can take more memory from outside buffer pool if linked server ,CLR,extended stored procs XML are heavily utilized
Any specific issue you are facing
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

What is the best way to work with AVCHD 720 24p footage in FCE4.1?

Hi I have a Panasonic HMC-150 and I've been shooting 720 24p footage at 21 mbps transfer rate.
I was wondering what is the best way to work with this material in FCE 4.1? I see that in the easy set up menu they only have the option of 1440X1080i at 50 or 60 fps or 1920X1080i at 50 or 60 fps.
Also in the rates drop down menu there is only 50 or 29.97.
So I was wondering which is the best choice for 720 24p footage and will it look alright in any of them? Also is it possible to customize these settings?
And finally can you work with faster transfer rates (21mbps) in FCE?

Yikes, this is going to be tricky since FCE does not support native 24p editing.
The work around for some of us is that AVCHD material that is 24p is often recorded to disc at 60i using telecine, in which case it can be editing at 29.97 frames per second, and then detelecined afterward for final export at 23.98 fps. The problem is that I think your camera actually records real 24p - not 24p packed into 60i. When you import the material from the camera what does QuickTime report the framerate as?

What is the best way to work with mixed media in 1080 timeline?

Hi there,
I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
What is the best way to work with this mixed media?
Thanks!
Steven

Hi Shane,
Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
1) I will work in a 1080p FCP sequence, correct?
2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
Thanks very much for all your help it has gone along way,
Steven
Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
Best to capture all the footage to one uniform codec.
Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

Best way to deal with hard coded variables in a package

There is a plsql package that reads a line from a file, parses the data, does a ton of sql operation with it (select update, inserts, calculations) and then writes the output to an output file.
The file names and the firectories are retieved from a database table.
Example:
select location,file_name into loc_in,file_in from temp_tbl;
p_File_handle := utl_file.fopen (loc_in, file_in, 'W');
My co worker is suggesting that getting the variable values from the table is not a good practice. He suggests that the values should be hard-coded in the program. Now you might ask what would happen if the file name or directory changes. His suggestion is to have a build file and do a token substitution of those hard coded values in the program and then load in to the DB. In short the process will involve the following steps:
-Get the package from the repostory.
-Change the file name and directory in the token file.
-Run the build process that will replace the values in the package .
-Load the new file (with the updated values) in to the DB.
Example:
This way the program will be initially coded like this:
p_File_handle := utl_file.fopen ('${loc_in}', '${file_in}', 'W');
After the build file runs, it will replace the values as
p_File_handle := utl_file.fopen ('C:/test', 'testfile.dat', 'W');
Once the file has changed with the new updated values, compile that into the database.
Ideas/comments?

Re: Best way to deal with hard coded variables in a package: why have you reposted using a new profile?
Neither post provides enough clear information on what the actual requirement is. We need more data in order to comment on your idea, your co-worker's, or to suggest alternatives.
My co worker is suggesting that getting the variable
values from the table is not a good practice.His reasons for this are...?
"variable values": Why do they vary? How often do they change?
The file names and the directories are retrieved from
a database table.How do the values get into the table? What is the volume of the data?
Oracle version? Operating system?

What is the best way to back up my photo's in iPhoto?

What is the best way to back up my photo's in iPhoto?
I have used an external hard disk which doesn't work very well.
Can anybody explain to me how I can use Time Machine? Or is there another simple way?
Thanks,
Marja Meijer

Tri-Backup 6 to synch volumes, folders (and they have a TimeMachine utilty)
http://www.tri-edre.com/english/tribackup.html
Back-In-Time 2: Unleash the power of Time Machine
Restore Time Machine data: Time Machine is a great basic backup tool. But the options for locating and restoring data are quite limited. Back-In-Time gives you total flexibility in discovering and recovering your data to any location on your Mac. See more...
A File History backup archive whether TimeMachine which is fine I agree to use CCC as primary but I also like something else or combination, one for system, one for data. And multiple sets. And even then I have needed to go and find a file version or something and glad I had online backup of something besides a once a week clone, which would not have helped me.
TimeMachine 101
https://support.apple.com/kb/HT1427

Best way to deal with multi-track clips?

Hi,
I'm editing a documentary using pre edited program masters and have been supplied the audio stems. Can anyone recommend the best way to deal with them so I can access any of the tracks within the main edit.
I've tried creating a compound clip and adding the stems but I only access to a mono track when using the clip in my main project. I've also tried creating a multicam clip but as my stems need to be split and spaced to line up with the main Pro Res file I don't seem to be able to insert slugs into multicam clip.
Has anyone found an elegant way to do this?
Many thanks,
Leigh

Hi leiski,
Happy New Year, and Welcome to the Support Communities!
Compound clips are still the best way to approach this, because you have access to the stems at any time with a double-click.
The following resources may provide additional information:
Audio editing overview
http://help.apple.com/finalcutpro/mac/10.1/#verdcd1cc1
Advanced multichannel audio editing
Final Cut Pro automatically groups channels into audio components according to how the channels are configured for the clip. You can expand the audio portion of clips to reveal and edit audio components down to the individual channel level. This allows you to apply different effects to different components and streamlines the process for making quick sound cutouts to a single microphone input or other fine adjustments.
Important: Many digital audio file formats, such as AAC and MP3, use interleaved stereo files, which do not contain separate left and right channels. These files appear as a single audio component unless you change the clip’s channel configuration.
Keep in mind the following when editing audio components in Final Cut Pro:You view and change the audio channel configuration of your clips in the Audio inspector. You can change audio component names, add or remove audio components, and configure channels in mono, stereo, and surround formats. See Configure audio channels.
Configure Audio Channels
http://help.apple.com/finalcutpro/mac/10.1/#verc1fab5f6
Using Roles to organize clips and export audio files
http://help.apple.com/finalcutpro/mac/10.1/#verc1faa7ce
Cheers,
- Judy

Best way to deal with same members having different parents/children

We have a situation where some nodes need to have different parents for different application but they exist in the main hierarchy. What is the best way to deal with it? The nodes used are pretty much the same.
Is it best to create a new hierarchy within the same version and let the nodes have different parents in it?
-- A

Every node has a parent in the hierarchy. You said that some nodes need different parents for different applications.
Do these 'different parents' exist further up the tree? If they do then you can create a boolean input property that flags the nodes that exist JUST for the application. Create a new property (call it NewAppParent, let's say) with a formula that recursively climbs up the tree to find its next parent for the application, and export NewAppParent as the parent value.
If the parent does not exist in the hierarchy then you should create an alternate hierarchy.
If the parent exists in the hierarchy and is not an ancestor of the node then you're out of luck. Unless you create an alternate hierarchy with unique parent names.
D

What's the best way to transfer 11,000 photo's from my old mac to my new one?

What's the best way to transfer 11,000 photo's on iphoto to iphoto on my new mac. I've just spent 24 hours importing them onlu for it to say there is not enough space available - BUT I'VE JUST BOUGHT AN NEW UPGRADED MAC?

Don't import them.
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

Best way to blog with multipel photos?

Similar Messages

Maybe you are looking for