Best way to burn Blu-ray if transcoding is already done? Toast 10?

I've seen the answer to this question in the past, but just spent some time searching the forums and couldn't find the answer.
I currently choose the route of FCP > Share to burn Blu-rays. No problem, everything's good (except limited menu options). However, once I close out of the program after the very long transcoding time, what is the best way to make another copy of the blu-ray without transcoding again, and without the first blu-ray I made (for example if the client already has the disc and wants another copy)?
I believe Toast 10 is one answer, but before I go and update my current Toast to 10 I wanted to see if this was the preferred method, or, if there is a way to do it in Compressor.
Thank you!
Eric

In the ~Library, Application Support>Apple Qmaster you'll find Create Disk. Open it. If your project is on the recently opened list, you can burn additional copies that way.
Or consider saving your file as a disk image; choose Hard Drive as Output Device. Pretty sure Toast will take an img file. Or use Disk Utilities.
Good luck.
Russ

Similar Messages

The best way to play blu ray discs/movies UP TO DATE

I am a huge TLOTR fan (lol) and up until recently I thought the quality of the movie i have(in digital form) was decent or even great, I recently bought a 15" inch macbook pro(2.2ghz)-- my first apple computer--- and when I played the same exact movie, the quality just looked terrible, in fact every digital movie I own doesn't look as stunning or high quality I thought it was. I'm slowly upgrading my movie library to a better quality one and the first thing I have to have is "the lord of the rings" trilogy(extended version) , so I guess the closest i can get to high picture quality is by buying those blu ray discs, one problem: how do I play blu ray on my macbook pro and will I experience a better quality than those normal DVDs.
According to your experience with blu ray, which is the best way to play blu ray discs on a macbook? ( please provide steps or pointers since I'm new at this)
Also, any alternative suggestions to be able to watch the movie in high quality is welcome, i just thought blu ray was the closest thing to perfect quality. Keep in mind i can't buy from itunes since I don't own a credit card.
TL;DR : I need to play blu ray disc movies on my 15"macbook pro 2011, what's the best way to go about this to get as close to full quality as possible. Also, would it make any difference if I bought blu ray disks versus the conventional DVDs (regarding movie quality)? Since the screen resolution of the 15" pro is not enough to experience "full HD quality"?

I am sorry to say that you cannot play Blu-ray movies on any Mac. Whether any of us agree or disagree with this, it is the way of things currently. One can rip Blu-ray movies to a Mac, and play them without menus or extras, but this is illegal and it is a violation of the terms of use of these forums to discuss.

Best workflow for burning Blu-ray and DVD

Hi,
What's the best workflow for effciency sake for burning both a Blu-ray and a DVD of the same project?
Essientially I'd like to export and create a menu once, then be able to downrez to DVD. However, I'm not sure that is possible since blu-ray and DVD are differnt codecs.
Thank you

The only way that you can get acceptable re-scaling of menus is to go from BR to DVD, and do the editing in Photoshop. Simply re-scaling the menu here will not give acceptable results.
I usually copy the various button layers from the BR menu to a new DVD menu file created using the provided Photoshop preset. You will still have to do some manual re-scaling and alignment. The thing that has given me the most trouble over the years is round button highlights - a segment is often chopped off. Font sizes will probably need adjusting too.
Unless you are adept with handling layers and groups within Photoshop, it may be easier to start again.
Any attempt to convert within Encore is unlikely to produce acceptable menus in my experience.

Best Way to Play Blu-ray disc/Blu-ray ISO on Windows 8

Nowadays, almost any computer can play DVD movies as long as there is a DVD drive provided, whatever it's a PC or Mac, homemade DVD or commercial DVD. But what about Blu-ray movies? Could your Windows 8 PC play this high definition movie formats without fuss? How to play Blu-ray on PC with Windows 8 system? This article will tell you the best way for playing/watch Blu-ray discs or Blu-ray ISO Files on Windows 8.
In order to watch Blu-ray discs or BD ISO on Windows 8, you must have three things: 1) a Blu-ray disc drive, 2) a Blu-ray movie, and 3) Blu-ray Player Software(Need decrypting Blu-ray function). It is this third one – software – that causes the majority of problems for Blu-ray users. The free player like Windows Media Player, VLC Player, etc don't have Blu-ray decrypting function and not support playing Blu-ray movies. So this Blu-ray Player for Windows 8 from UFUSoft will be the best solution for you.
Follow the following steps to Play Blu-ray discs or Blu-ray ISO movie and media file on Windows 8:
Step 1: Connect the Blu-ray driver to your Windows 8 PC via a USB connection. The USB of the driver should be above 2.0.
Step 2: Free Download the Windows 8 Blu-ray Disc/Blu-ray ISO Player and then install it.
Step 3: Insert your Blu-ray disc into the Blu-ray driver. Next, open your Blu-ray movie by just pressing the “Open Disc” in the main interface to select Blu-ray drive and then click "OK" button to load the Blu-ray directly. You can now enjoy your Blu-ray movies on Windows 8 PC.
Another option is to load Blu-ray folder, you can click "Open File" button to directly select the Blu-ray folder and click "OK" button, now you can watch the Blu-ray movie on Windows 8 PC.
Step 4: Stop the playing the Blu-ray movie on Windows 8. If you want to stop playing the Blu-ray disc, you only need click Stop Button and eject the Blu-ray movie.
Tips:
1. When you want to play the Blu-ray ISO image file, you need to load Blu-ray ISO image file to the virtual drive firstly, the open method is the same with loading Blu-ray disc.
2. While the video is playing, click the "Snapshot" button to take a picture from a video. Click Open Snapshot Folder to find the captured picture. You can choose the snapshot format and the snapshot folder in the Preference window. And also you can choose the image format like JPEG, PNG, BMP.
3. When playing Blu-ray disc, you are allowed to choose the specific title/chapter in the "Controls > Title/Chapter" column to play.
Hope this way could help you have no problem to enjoy Blu-ray disc and Blu-ray ISO files on Windows 8, more info please enter: Play Blu-ray disc/Blu-ray ISO on Windows 8 PC.

I am sorry to say that you cannot play Blu-ray movies on any Mac. Whether any of us agree or disagree with this, it is the way of things currently. One can rip Blu-ray movies to a Mac, and play them without menus or extras, but this is illegal and it is a violation of the terms of use of these forums to discuss.

Burn Blue-Ray with 7.1 sound - Dolby TrueHD

Hi everybody, well, new version of FCS is out, including Compressor 3.5. It's great to see the Blue-Ray burning possibility, but it seems there's no support for 7.1 surround sound. Is there any way to burn Blue-Ray discs on Mac with Dolby True HD 7.1 surround sound? Thanks

not possible yet.

What is the best way to burn full hd movie to dvd

Hi i need to find the best way to burn full hd movie from panasonic camcorder to dvd thanks

Hi
There is NON !
as DVD is as Standard (Whatever program used) - only Interlaced SD-Video Quality
So if You need better then
• Use Blu-Ray (Roxio Toast™ + BD-Burner and Disks)
• or Save out to an USB-Memory stick and play this
What's worse is that iMovie'08 or 09 or 11 - Can not deliver even DVD-Standard but degrades the quality by discarding every second line in the picture. This happens when going from Eventy's to Project's - Ther is no way around this but to use another program that can deliver as
• iMovie up to HD6 - or -
• FinalCut any version
If iMovie 08-11 are only option then do not
• Share to iDVD - as this also degrades the final DVD - but -
• Share to Media Browser - and as MEDIUM (or ev. as Large) - NOT HD or other resolution as this too degrades the final DVD due to BAD downscaling in iDVD program.
My notes on DVD quality:
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeaskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Trying to burn Blu-ray on Power PC G5

Does anyone make a Blu-ray video authoring software program that does not require an Intel processor? I'm trying to use Roxio's Toast 10 with BD/HD Plug-in but is is not working.
I have a Dual 2 GHz PowerPC G5 running OSX 10.5.8 (Leopard) with 10 GB of Ram and Final Cut Studio 2 (Final Cut Pro 6.0.4)
My Blu-ray burner is a LaCie d2 Firewire drive.

My Toast 10 now works in burning Blu-ray video. I've learned from other posts that there was a problem when I updated to QuickTime 7.7 in that certain video file types were no longer recognized. Unfortunately you just can't install an earlier version over the newer version the traditional way.
I've learned however that there is a way to install an earlier version of QuickTime (in my case QT 7.6.4 without completely re-loading the Operating System software (Leopard for me).
There's a Shareware program called Pacifist which takes elements from the earlier QuickTime installer and replaces the newer versions problem files. The QuickTime version # still says your current version but the elements have changed. See this link for how to do this:
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
After rebooting, the QuickTime Player (and more importantly Final Cut Pro) supported all the video files. Toast 10 still had a problem until I trashed the Toast plist and pref files in the User>Library>Preferences folder and then re-installed Toast 10.0.9. Now everything works!
I still want to buy a better Blu-ray authoring program because the menus in Toast are so basic.

Burning Blue Ray

I have a 15' powerbook and use an external dvd burner. I have been using mac the ripper and toast 7 to make copies of my dvd's. Now I've read that toast 8 can burn blue ray. Will mac the ripper work on downloading blue ray and if so will toast 8 burn it? Also Will i need to get a special dvd burner and disks?

toast = yes
Mactheripper = no way
have to have a blu-ray drive to read the disc
osx is not ready for HD or blu-ray yet.

Burning blu-ray disks with Archgon

I have a HD camcorder and create home movies of my daugher with FCP X. I have an iMac (late 2012 model I think). I recently purchased the Sea Tech Archgon blu-ray writer super drive with the intent of buring blu-ray disks for the grandparents. The instruction manual for the blu-ray player states "Please purchase and download appropriate blu-ray playback software for Mac OS". My questions are:
1) When I plug in the drive, no icon appears on the desktop. There is power to the unit because it allows me to open and put a disk in.
2) Do I need to purchase Mac Blu-Ray player just for the iMac to see the drive before I can burn any blu-ray disks?
3) I don't intend to use the drive to watch any blu-ray movies. This is strictly for making blu-ray disks that can be popped into a regular blu-ray player so the grandparents and other relatives can enjoy the home movies.
4) Is FCP X an appropriate software, which I already have on my computer? It allows me to create DVD directly from FCP X, but when I tried to do it from FCP X, this drive does not come up as an option.
5) I also have Titanium Toast and purchased the blu-ray upgrade. Then I save the file from FCP as a master on the computer and attempted to burn the blu-ray using Toast. Again, this drive does not come up as an option.

1. Any external burner will only become recognized once you insert media. If you plug it into the Mac and launch Toast, it should show at the bottom of the Toast window. You can choose it and control the drive with Toast - open tray, close tray, insert DVD, etc.
2. No.
4. Not sure re. blu-ray, but try to export it as a .mov or Video_TS folder, then drag either into the Toast window. That is how I proceed using iMovie and/or iDVD. (I only use FCE for special effects/layered intros, etc., export at best quality settings, then use those with iMovie and/or iDVD). You do need software (Toast is best because of the blu-ray plugin) to burn to DVD.
5. Again, the drive should show up at the bottom - see screenshot (mine is only showing my internal Superdrive; once I attach my external burner, both will show up):

Is there a way to play blu ray movies on your imac?

Is there a way to play blu ray movies on an imac?

Is there a way to play blu ray movies on an imac?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

What do i need to burn blu-rays?

Hello everyone. I'm new to Final Cut Pro, and Macs in general, so please bare with me. I'm a film student, and recently purchased a Canon XH-A1s and a Mac Pro with Final Cut Pro 6 to jump start my video production business.
My only problem is that i only have the ability to produce HD video, so when it comes to distribution, DVD is really not an option. I've heard with an upgrade to Final Cut Pro 7 that you can finally burn Blu-Rays without a third party application, just wondering if that was true.
I was planning on upgrading to Final Cut Pro 7, and purchasing an external, USB Blu-Ray read/write drive. Should everything work ok if i go down that route?
Thanks everyone,
-Billy
Message was edited by: blakes2406

The Mac does not come with a Blu-ray burner. So you would be burning a Blu-ray compatible file to a standard DVD-5 or DVD-9. Neither of which are ideal for authoring Blu-ray content.
Do an exhaustive search online about Blu-ray authoring and disk creation. This is not something for the hobbyist video creator (and I say hobbyist in the sense that you're not creating thousands of copies for mass distribution, so no one take offense.)
Blu-ray is expensive and requires a lot of planning and prep to do it right. But you can't burn an official Blu-ray disc on a Mac as they stand. And, Compressor doesn't burn discs, it only creates files. DVD Studio Pro would be the app that would burn the Blu-ray disc, and DVDSP has not been upgraded since long before Blu-ray came on the scene.

I finally was successful in burning a CD of a slideshow I created in iPhoto, however, it is blurry. What is the best way to burn to a CD or DVD for clarity. Also, I realize if burned in iPhoto it will only be playable in iPhoto. Help! This is needed soon!

I finally was successful in burning a CD of a slideshow I created in iPhoto, however, it is blurry. What is the best way to burn to a CD or DVD for clarity. Also, I realize if burned in iPhoto it will only be playable in iPhoto. Help! This is needed soon for a wedding reception!

What version of iPhoto are you using? How do you plan to view the slideshow at the wedding reception, on a TV screen? If so then you will need to send the slideshow to iDVD and burn a disk from there.
If you're in iPhoto 11 and the slideshow was created in the slideshow mode and not from an album, then go to the Share menu and select iDVD. That will create a QT movie of the slideshow and import it into iDVD.
In iDVD select your theme and setup the menu as you'd like. If you want the movie to begin plahying immediately when the disk is inserted into the DVD player go into the Gallery mode and drag the movie into the Autostart bin at the left.
Click to view full size
If you want the movie to loop continuously go to the Advanced menu and select Loop.
Click to view full size
When you're finished setting upb the iDVD project save it as a disk image via the File ➙ Save as Disk Image menu option. This will allow you to check it with DVD Player before tryingto burn to disk. Mount the disk imnage by double clicking on it and launch DVD Player and play. If the movie plays as you want and everything is good you can burn to disk with Disk Utility at the slowest speed available to assure the best burn quality. Always use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Cd or dvd? rw or r? what is the best way to burn disk?

Im almost just lost all my songs, trying to do this before, so what is the best way for burning a cd from itunes?
I've heard its better with a cd and r (i believe that means you can only put songs on it once?)
please help! i rather not lose my hard earned and searched ituens music!

As long as you're not having to use too many CDs, and don't care that you can't erase them, then CD-Rs would be fine. If you want to try DVDs and you had problems before, first confirm what format your drive takes - some use only DVD+R (or RW), some use only DVD-R, and some can take both - and perhaps try a different brand of disk; some brands just don't work well, and some drives just seem to prefer different brands.

Is my hl-dt-st bddvdrw gbc-h20l capable of burning Blu Ray discs (BD-R)?

Hello. I have a HP Pavilion Elite m9470 Desktop PC with an hl-dt-st bddvdrw gbc-h20l drive running Windows 7 Ultimate (the pc came originally with Vista). For the first time I tried to burn a Blu Ray disc BD-R in fact. When I loaded the disc into tray, the pc started trying to read the disc, without success for endless minutes. In fact the door could not open even manually - I had to restart the system to take the disc out.
I always thought that the specific drive was capable of not only reading but also burning Blu Rays - could someone let me know? Is it a matter of appropriate software?

You're welcome.
Click on support & driver links on the HP site, enter the complete model # of the PC, you will see a links for information pertaining to your PC, like: HP Pavilion Elite m9470gr Desktop PC Product Specifications
Enjoy

Best way to burn Blu-ray if transcoding is already done? Toast 10?

Similar Messages

Maybe you are looking for