Best way to call an English mobile in Spain from A...

I'm going to be in Argentina for a month this summer, and I'll want to call an English mobile phone (on o2) which will at the time be in Spain. What is the cheapest way to do this? From what I've seen, simple pay as you go skype credit appears cheapest. Would appreciate advice. Thanks!

Hi Ian (again!
Well, what I am trying to do is learn this matte/mask thing, so what I reckon I should do is grab the frame of the TV set (I am trying to figure this out, so I can export the single frame into Photoshop -- again, I am guessing -- to edit it into a matte mask).
So I am thinking, my steps are (theoretically; I don't yet know how to actually do this):
1) Capture the freeze frame of the TV set into a graphic file
2) Use Photoshop or other to remove all color information leaving only the "display" area of the TV set as empty, and black out all other areas (like looking through a ragged hole.
3) Inverse the image, so that black is now in the center and is what Final Cut uses as transparency, while all the other white stuff is opaque -- to block out the rest of the "added video" image.
4) Figure out how to use the matte in FCP to show only the "added video" through this matte mask.
5) Combine the matted video into the original footage so that the new matted video properly lines up and completely covers the old footage showing on the original TV image.
I just don't know what the functions are to do these things in FCP.
Thanks!

Similar Messages

  • Best way to call

    which is the best way to call a scotland mobile phone from skype? i been using pay as u go credit and its 8 cents a min and was wondering if a monthly thing or a subscription is the way to go

    Translation patterns are for internal use to manipulate a number and then a route pattern will be responsible for pushing it out the gateway or some other method.  If this DID is still being sent to you you could either manipulate this at the CUBE and hairpin it backout or send it to CUCM and hairpin it back after it gets translated with a translation pattern out a route pattern.  I would recommend doing everything at the gateway unless you want to keep some record that the number is in use which CUCM can do more effectively.
    This DID being used for a fax is elsewhere offnet at this point I take it?  Make sure you have the proper CSS's and partitions set for hair pinning if you do this on CUCM since by nature forwarding to external numbers is disabled by default (or at least it used to be as I recall).

  • Best way to call EJB - Servlet or Tag Library

    Hi,
    What is the best way to call an EJB from a JSP? We are using Weblogic 7.0(moving to 8.1 beta). WE have a form on a JSP that needs to get data from an EJB. Our flow goes from JSP --> Controller servlet or tag library -->EJB "Bean" Controller ---> EJB. The specfic EJB we need to populate drop downs and fields will be called by a bean controller. Is it better to call the bean controller using a tag library in the jsp or go to the controller servlet to get the data? If servlet is the answer, where do I lookup the EJB Home and call the create from within the servlet? Any help would be greatly appreciated!!
    Thanks!

    IMO, if you are following some design patterns, like the MVC framework, the best thing is to populate the model(entities that contain the business data) and call the respective getXX methods from the model on the JSP page. The reason for doing so is to keep JSP pages away from any other work other than to just display the business data contained in the respective business entities.
    The model can be populated in the servlet and either set in the request or session attribute as per the requirement.
    The EJB can be looked up in the servlet as and when required. I would suggest to make use of the Service Locator Pattern to do a look up for the EJB Remote Interface and accordingly make the business calls.
    Hopefully this answers some of your questions.

  • What is the best way to call a report from within a report

    What is the best way to call a report from within a report(master / Detail concept)
    A type of drill down report
    Oracle Database 10g
    Forms 10.1.2.0.2
    Report Builder 10.1.2.0.2

    Hi
    Have a look in this link, certainly you will get fix, if not just post a comment on blog, will get reply soon
    http://windows7bugs.wordpress.com/?s=oracle+10g+bug

  • What is the best way to call a pageflow action from JavaScript?

    What is the best way to call a pageflow action from JavaScript?
    Thanks,
    John

    John,
    How would I do this from a grid??? Unfortunately there are no JavaScript attributes
    on any of the grid tags that I can see.
    Thanks,
    John
    "John H" <[email protected]> wrote:
    >
    Thanks John!
    "John Rohrlich" <[email protected]> wrote:
    John,
    If you want to put up a confirm dialog before calling an action from
    an
    anchor it is done as follows.
    Here is an example from code of mine that deletes a customer order,if
    the
    user confirms the delete. I pass the order id as a parameter.
    - john
    Here is the JavaScript -
    function confirmDelete() {
    if(confirm('Continue with order delete?'))
    return true;
    else
    return false;
    Here is a sample anchor tag -
    <netui:anchor action="requestToDeleteOrder" onClick="return
    confirmDelete(); return false;">
    Delete
    <netui:parameter name="orderId" value="{container.item.orderId}"/>
    </netui:anchor>
    "John H" <[email protected]> wrote in message
    news:402138f5$[email protected]..
    Thanks for the replies. I figured it was going to require buildingmy own
    url
    to call the action. I had hoped there was an easier way to do it.Rich,
    the
    reason I want to do this is because I want to call the JavaScript
    function
    confirm()
    when a user clicks on a link (in a repeater/grid) to drop a record,I only
    want
    to call the drop action if the user confirms the drop. Maybe thereis a
    better
    way to do what I am trying to do??? I really appreciate any help
    you
    guys
    can
    give me on this, I am pretty new to this sort of stuff.
    Thanks,
    John
    "Rich Kucera" <[email protected]> wrote:
    "John H" <[email protected]> wrote:
    What is the best way to call a pageflow action from JavaScript?
    Thanks,
    JohnTry figuring out the URL to the pageflow action, create a hidden
    form
    in the
    page, then use JS to submit the form. Why would you want to though,
    isn't
    the server going to want to send you to the next page?

  • Best way to call oracle db from BPEL 2.0

    Hi
    Anybody knows which is the best way to call select or call store procedures from BPEL 2.0 ? Do I need to use JCD (java collaboration definition in repository-based projects -caps 5.x) and oracle eWAY to interact with oracle database?
    Regards.

    You can also create a new WSDL with a concrete binding to DATABASE, as explained on http://wiki.open-esb.java.net/Wiki.jsp?page=CreatingAWSDLDocumentForTypeDATABASE
    BRs
    Kris

  • What is the best way to call SSH commands through Java technologies

    What is the best way to call SSH commands through Java technologies

    I don't think you can specify the password at the prompt using ssh. Plink has the -pw command option for passwords. What I did was except ssh to ask me and write the password programmatically through the outputStream I obtained from my Process object. I looked for "password: ", and then wrote the password with a trailing newline.
    Both plink and ssh will also ask if you trust the host if it is the first time you are connecting to it. So before just writing the password, check if the program wants verification from you: normally supplying "y" or "n". This should only have to happen the first time the client connects. It looks like thisPLINK:
    The server's host key is not cached in the registry. You
    have no guarantee that the server is the computer you
    think it is.
    The server's key fingerprint is:
    1024 f8:43:61:4c:a2:5b:77:be:5b:a7:bb:1f:f7:79:b3:b7
    If you trust this host, enter "y" to add the key to
    PuTTY's cache and carry on connecting.
    If you want to carry on connecting just once, without
    adding the key to the cache, enter "n".
    If you do not trust this host, press Return to abandon the
    connection.
    Store key in cache? (y/n)
    SSH:
    The authenticity of host '127.0.0.1 (127.0.0.1)' can't be established.
    RSA key fingerprint is e1:02:13:c8:52:c2:23:41:9b:5b:58:2c:18:e6:59:af.
    Are you sure you want to continue connecting (yes/no)?What I did was read character by character from the inputStream until I found things of interest ... like "password: ". You only need to search for this in your method which will launch the ssh or plink Process. Once you have verifyed yourself, you can just pass commands to the Process, which is an ssh connection.
    My suggestion is to read() each byte from the Process's inputStream and write it to stdout. Look and see what you need to be looking for so you can interactive with the program correctly. You can't use readLine here becuase when the ssh asks for the password it does not print a newline. I do know for sure, that ssh will simply print, "passowrd: ". Plink will print this as well if the -pw option is not supplied.

  • I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

    Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
    Look at my network.
    Shared is what your looking at.  I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders.  Hope that helps if your looking for a very simple way on a wireless network.

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Best way to spool DYNAMIC SQL query to file from PL/SQL

    Best way to spool DYNAMIC SQL query to file from PL/SQL [Package], not SqlPlus
    I'm looking for suggestions on how to create an output file (fixed width and comma delimited) from a SELECT that is dynamically built. Basically, I've got some tables that are used to define the SELECT and to describe the output format. For instance, one table has the SELECT while another is used to defined the column "formats" (e.g., Column Order, Justification, FormatMask, Default value, min length, ...). The user has an app that they can use to customize the output...which leaving the gathering of the data untouched. I'm trying to keep this formatting and/or default logic out of the actual query. This lead me into a problem.
    Example query :
    SELECT CONTRACT_ID,PV_ID,START_DATE
    FROM CONTRACT
    WHERE CONTRACT_ID = <<value>>Customization Table:
    CONTRACT_ID : 2,Numeric,Right
    PV_ID : 1,Numeric,Mask(0000)
    START_DATE : 3,Date,Mask(mm/dd/yyyy)The first value is the kicker (ColumnOrder) as well as the fact that the number of columns is dynamic. Technically, if I could use SqlPlus...then I could just use SPOOL. However, I'm not.
    So basically, I'm trying to build a generic routine that can take a SQL string execute the SELECT and map the output using data from another table to a file.
    Any suggestions?
    Thanks,
    Jason

    You could build the select statement within PL/SQL and open it using a cursor variable. You could write it to a file using the package 'UTL_FILE'. If you want to display the output using SQL*Plus, you could have an out parameter as a ref cursor.

  • What is the best way to manage tasks?  I have moved from outlook and only have mail and ical

    What is the best way to manage tasks.  I have moved from a pc with outlook and have lost 'tasks' in that programme.  Do I have to rely on ical or can I download an app to manage business tasks?

    iCal does have reminders but its implementation of tasks is pretty wimpy. There are a number of programs that are better geared to the job. I was a level 4 procrastinator until I discovered Getting Things Done and for me Things is perfect. It lets me handle projects which are dependent upon multiple tasks in a no-nonsense easy fashion. Much less expensive and really not much more than a list maker is Wunderlist. Thankfully there's a ton of shareware offerings - check out MacUpdate.com and see what works for you.

  • Calling landlines and mobiles in Australia from ov...

    Hi,
    I intend to get a Skype number for use when I leave Australia for overseas for 9 months.
    I look at the "Premium" service but it does not show calling back to Australia to a mobile!
    What I want to do is call landlines and mobiles in Australia from overseas and for Australian contacts to call me on a Skype number.
    I already use Skype credit and expect that in addition to the bulk of the calls back to Australia I will need to call other countries (bookings etc)What do I do?
    If Skype number with a premium subscription does not allow calls to mobiles then would I need a Skype number (subscription) AND Skype credit?
    Cheers,
    Roger

     Please contact customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Best way to call screen in BOR method

    Hi,
    I'm new to BOR objects. I have a requirement to create to a screen to accept values and perform validation on the value.
    As I'm using FOP(EWBC), So in the steps the best way looks like using BOR objects.
    Can any body please guide me what is the best way to create and call a screen in the BOR method?
    Thanks in advance
    Rohan

    IMO the best way is to create a Function Module and call it from your BOR method

  • Best way to call methods on similar objects without an interface

    Hi,
    I have two objects that i need to iterate, they both have the same method i need to call during iteration, but those two objects are from different libraries and i cannot change them to add them as implement interface...
       for (Iterator it = documents.iterator(); it.hasNext();) {
               Document1 document = (Document1) it.next();
               document.getName();
    But I can also get a documents's collection where the object is Document2 and not Document1 that also has getName(), what's the best way to implement this? I mean i know i can just add if conditions to say if (instanceof) do this or that.. but I don't think this is good as everytime there's a new type of doc i'd have to add one more...
    Any suggestions?
    Thanks,

    I have two objects that i need to iterate, they both have the same method i need to call during iteration, but those two objects are from different libraries and i cannot change them to add them as implement interface...
    You already know what you need to do. You just don't want to do it.
    You can't treat two (or more) instances the same if they aren't the same. Here are three methods:
    1. Add code (like you propose) to determine which type you have
    2. Create your own classes that extend those classes and have your own class implement your own interface that has the 'getName' method. When you create instances of your own class the constructor can have code that determines which type you have and then use the appropriate 'getName' method. Your app code would use your own classes instead of the ones from the libraries
    3. Use reflection to call the 'getName' method.

  • Best way to call SPROC

    For now I am calling SPROCS from HTMLDB links and passing the app, page, and session. Then using htp.p to print out a <script> tag with window.location to redirect to a page in the app. Is there a better way to have the SPROC redirect to an HTMLDB page maintaining session state?

    I call a SPROC via a URL from a link on an HTMLDB page. After execution of the SPROC, I want to go back to a different page of the HTMLDB app. I currently use the htp.p and have print out the following to the browser:
    <script>
    window.location="f?p=<app>:<page>:<session>";
    </script>
    I passed app, page and session into the SPROC via the URL.

Maybe you are looking for