Best way to change row and/or cell colors other than doing it in sql

So I have some interactive reports and I would like to be able to change the color of the row (and in some cases cell). I have seen threads talking to doing this with the sql statement. But is there a way to do this either when the page is displayed or as a result of some action on the page?

Take a look at this article, towards the middle it shows in interactive reports how to change colors of rows based upon values: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31irr.htm
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned..

Similar Messages

Best way to convert my Premiere sequence, to AE (other than using prproj obviously)

I made a thread earlier, but didn't find a solution. I tried to link some Premiere sequences with AE, with blank screens and errors as a result. (probably some components in the file I've gotten rid of, or a bug). I'll pay attention to it in the future.
I can link the programs together if I convert my prproj to another format. Is there a way I can do this without losing quality? (Preferably without creating a massive file either.) Will I lose quality if I use a render file for ex?
Thanks in advance

My Premiere sequence(s) doesn't let me link up with AE. Empty screens, on both sides as a result of using "dynamic link". (Importing project works, but I need live edit (Premiere screen directly affected by what I do with the files in AE)
I've worked around both programs and looked up online for answers with no real results. Now I'm trying to work around the system, to find a solution. Gathering the sequences and converting them into another file, will probably make AE accept the files live. I'm looking for the best way to do this.
That's what I'm trying to do here.

What is the best way to read, process, and write an Excel File Server side...SQL Server Agent Job

So I was using dynamic Excel commands to open and save as using...
Microsoft.Office.Interop.Excel.Application
and
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
which worked all fine and dandy client side. Then when I attempted to create a SQL Server Agent Job, this failed as a result of SQL Server side not being able to execute dynamic Excel commands.
So do I need to therefore try and do this function via Microsoft.ACE.OLEDB.12.0 commands? And where can I find the commands and syntax to open and save as? I have to Open a .xlsx file, save it as a .xls file, and then open this newly created .xls file and
then save it as a .csv file.
Thanks for your review and am hopeful for a reply.
ITBobbyP85

I think you might be over complicating things.
You can use SSIS with Excel Source/Destination connections to read in, or output to an excel sheet/file.

Best way to change partition key on existing table

Hi,
Using Oracle 11.20.3 on AIX.
We have a table about 800 million rows and 120gb in size.
Want to try copies oif this table to evalaute different partitiong strategies.
What is the quickest way to do this?
Would have liked say datapump table 1 tro disk and datapumo import the data to new table but do the tables need to be of the same format.
Thanks

>
Using Oracle 11.20.3 on AIX.
We have a table about 800 million rows and 120gb in size.
Want to try copies oif this table to evalaute different partitiong strategies.
What is the quickest way to do this?
Would have liked say datapump table 1 tro disk and datapumo import the data to new table but do the tables need to be of the same format.
>
First your subject asks a different question that the text you posted: Best way to change partition key on existing table. The answer to that question is YOU CAN'T. All data has to be moved to change the partition key since each partition/subpartition is in its own segment. You either create a new table or use DBMS_REDEFINITION to redefine the table online.
Why do you want to export all data to a file first? That just adds to the time and cost of doing the op.
What problem are you trying to use partitioning to solve? Performance? Data maintenance? For performance the appropriate partitioning key and whether to use subpartitions depends on the types of queries and the query predicates you typically use as well as the columns that may be suitable for partition keys.
For maintenance a common method is to partition on a date by year/month/day so you can more easily load new daily/weekly/monthly data into its own partition or drop old data that no longer needs to be kept online.
You should use a small subset of the data when testing your partitionings strategies.
Can you do the partitioning offline in an outage window? If not then using the DBMS_REDEFINITION is your only option.
Without knowing what you are trying to accomplish only general advice can be given. You even mentioned that you might want to use a different set of columns than the curren table has.
A standard heap table uses ONE segment for its data (ignoring possible LOB segments). A partitioned/subpartitioned table uses ONE segment for each partition/subpartition. This means that ALL data must be moved to partition the table (unless you are only creating one partition).
This means that every partitioning scheme that uses a different partition key requires ALL data to be moved again for that test.
Provide some information about what problem you are trying to solve.
>
Is this quicker than datapump?
>
Yes - exporting the data simplying moves it all an additional time. Ok to export if you need a backup before you start.
>
Found artcle which talks about using merge option on datapump import to convert partitioned table to non-partitioned table.
>
How would that apply to you? That isn't what you said you wanted to do.

Best way to change fund posted in an EBS document

What is the best way to change the fund in one line item in a document produced when the electronic bank statment is processed? The bank charges fees that come through the statement and should post to a different fund then any other item such as checks, etc.
I am trying a substitution but coming across the error Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002.

The error message that I was receiving...Field COBL-KOSTL. does not exist in the screen SAPLKACB 0002, was coming from function module EXIT_RFEBBU10_001 and include ZXF01U01. The programming code was attempting to default a cost center when the external transaction code = 661. The coding was removed and the default acct assignment cost center was added to the cost element master data. The substitution also worked correctly as it should.

Newbie Quesion: Best way to change colour of a movie

Hi,
Could someone tell me the best way to change the colour of
one element of a
movieclip in AS2?
Say for example I had a filled white circle in the middle of
a black square,
how can I change just the colour of the circle?
I have tried this.myColor.setRGB( color ); but that sets the
entire clip to
be of one colour. Do I need ( as I suspect ) one clip on top
of another or
is there any way of keeping details of the clip being
changed?
TIA
Wil

Cheers jdh,
This is one method I'd considered.
I'll give it a bash.
Wil
"jdh239" <[email protected]> wrote in
message
news:ens1vd$ahn$[email protected]..
> Don't know if this will help, but this code changes the
color of my
> "LOADING"
> text while it is loading. Should have the essential code
to do what you
> are
> looking for.
>
> Make the white circle a movie clip and pick the
following code apart to
> get it
> to change colors:
>
>
>
> stop();
> loading.gotoAndPlay(1);
> import flash.geom.ColorTransform;
> import flash.geom.Transform;
> var colorTrans:ColorTransform = new ColorTransform();
> var trans:Transform = new Transform(loading);
> trans.colorTransform = colorTrans;
> loadI = setInterval(loadF, 100);
> function loadF() {
> percent =
Math.floor(_root.getBytesLoaded()/_root.getBytesTotal()*100);
> if (percent<=39) {
> colorTrans.rgb = 0x0000FF;
> // blue
> trans.colorTransform = colorTrans;
> } else if ((percent>39) && (percent<60)) {
> colorTrans.rgb = 0x00FF00;
> // green
> trans.colorTransform = colorTrans;
> } else if ((percent>60) && (percent<80)) {
> colorTrans.rgb = 0xFF8000;
> // orange
> trans.colorTransform = colorTrans;
> } else if ((percent>80) && (percent<99)) {
> colorTrans.rgb = 0xFF0000;
> // red
> trans.colorTransform = colorTrans;
> } else if (percent>=99) {
> clearInterval(loadI);
> _root.gotoAndPlay(16);
> } else {
> loading.gotoAndPlay(1)
> }
> }
>

Best way to move data and programs to another profile on same Mac?

Hello,
What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
Thanks for your help!
Johnathon

This usually means that a configuration or preference file is corrupted. In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
See if the problem is resolved in the user's normal account.
It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved. The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

Best Way to Change Source System Client

We initially had a ECC source client for BI as 35. But over time, we suffered with good test data because the ECC team use client 15 and not 35. We want to change BI 7 to use client 15. I have created a new source system in RSA1 for Client 15 but when I try to delete client 35 and /or change the source client on a datasource, all the data mappings are deleted!
I would really appreciate any advice or information on the best way to change the source R3 client for Bi without losing data mappings. Point awarded and much respect
Warm regards
Lee Lewis

Hi,
Yes. There is a way to change the source system without deleting the old system. Please use the T.code BDLS and for more information refer the below link
Re: Changing a Source System.
OSS note 886102 will also give more information about this.
Hope it helps.
Thanks.

Best way to change config then change it back after a while.

I spent some time today trying a couple approaches to this, but they all seemed a little klunky.
I'm looking for the best way to change the BGP prefixes which are advertised out to an ISP, based on some check. I want to set a timeout so the router won't attempt to send the route again for say 30 minutes after it is triggered, but then will start advertising it again, and monitor to see if the trigger condition returns. If the trigger condition returns then again withdrawl the route for 30 minutes and so on.
I'm using a prefix-list already to limit outbound route advertisments, so it seems simplest to just make a config change to remove one line in the prefix-list, then a few minutes later put it back.
I tried just using the "cli command wait", but if I set the wait period too long, the applet seemed to die, and never ran the later cli commands to put the prefix-list line back. There is also a exit-time clause for the event, but I couldn't figure out how to put the line back after the exit-time expired. Lastly I tried doing an event with a watchdog timer, but also couldn't get that to work either. Before I spend too much time working on differant options, I wanted to see if anyone had any recommendations.
I've done some TCL scripting on Cisco routers, but that seemed to be overkill for this, and I wanted to keep the config easy to manage for peers who might not be as proficient in TCL scripting.
This is intended for ASR-1002X routers if it matters.
Any suggestions would be much appreciated.
Thanks
Derek

Thanks for all your help Joe.
Ok, so here is my current script, which seems to be working pretty well (changing to entry-type "value" fixed the variability in detection times). For testing in the script below, I'm using a 30 second timeout for when the line gets put back, and a 60 second timeout for when monitoring should resume after the event is triggered. The script checks the value of the OID every 5 seconds.
The only other thing I would like to do with it that I can't figure out, is how to use an environment variable for the exit-time. Ideally, I would just add a value, like 10 seconds, to the ATimeout variable. However I can't figure out the syntax to just use a var for the exit-time. Anyone know the secret (or if it is possible?)
event manager environment ATimeout 30
event manager environment q "
no event manager applet DDOS_RESPONSE01
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit
event manager environment ATimeout 30
event manager environment q "
event manager applet DDOS_RESPONSE01
event snmp oid 1.3.6.1.4.1.9.9.166.1.17.1.1.21.80.65538 get-type exact entry-op gt entry-val "0" entry-type value exit-time 60 poll-interval 5
trigger
action 001 cli command "enable"
action 002 cli command "config term"
action 003 cli command "no ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32"
action 004 syslog msg "DDoS Attack Detected. Removing Web Srvr Subnet from PUBLIC_NETWORKS for ($ATimeout) seconds."
action 005 cli command "event manager applet RESTORE_PREFIX"
action 006 cli command "event timer countdown time $ATimeout "
action 007 cli command "action 101 cli command $q enable $q"
action 008 cli command "action 102 cli command $q config term $q"
action 009 cli command "action 103 cli command $q no event manager applet RESTORE_PREFIX $q"
action 010 cli command "action 104 cli command $q ip prefix-list PUBLIC_NETWORKS seq 140 permit 10.4.1.0/24 le 32$q"
action 011 cli command "action 105 syslog msg $q DDoS Attack Timeout ($ATimeout) reached. Re-adding Web Srvr Subnet to PUBLIC_NETWORKS. $q "
action 012 cli command "action 106 cli command $q no event manager applet RESTORE_PREFIX $q"
exit

Best way to change workstation

What is the best way to change the workstation name and import it into
edirectory.
We constantly have user change computer name. Most of the time when we
change the computer name it takes day to reflect on the edirectory. When
rename the workstation object, we cannot even remote to the workstation.
I have problem remote to through user name, I keep getting user does login
when in fact the user is login. We have netware 6.5 with the latest
service pack.

Sang,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Best way to change TreeMap value?

Hello,
I am wondering what is the best way to change a value in a TreeMap? I have retrieved a value by .get on the key i.e.
String aString = (TreeMap) aTreeMap.get(aKey);but would now like to change aString and ?.put? it back into the map?
How would I do this?
Thank you,
Poot.

but would now like to change aString and ?.put? it
back into the map?Do I just have to keep a note on the (key,value) - especially key - change the value and then .put(key,value) back in? Though I'll need to remove the initial pairing if I do this since TreeMap won't allow duplicate keys!
There must be an easier way as this.
Thank you for your reply,
Regards,
Poot.

Best way to change the speed of a sequence of linked short clips?

I have a sequenced project of about 150 short 1 second clips linked together via a crossfade transition... I would like to make the timelapse faster. What is the best way to change the speed of the sequence or the clips themselves? I would rather change the sequence for it would be less labor intensive I would imagine!!
Thanks
RD

Or...select all the clips in the timeline, control-click (or right-click) on them and select 'Duration'. Change the duration to whatever will fit/fill the timespan you need, then hit OK.
If you're needing to change the dissolve as well, you should remove all but one of them first, then drag the remaining transition into the browser. Dbl-click it into the viewer, set the duration of what you want, then use the hand icon at top right and drag it back into the browser. Rename it relevent to it's new duration, then control-click on it and select "Make Default".
Now, set an inpoint at the first frame of your clips in the timeline, then drag all the shortened clips from the timeline into the canvas and release where it says 'Overwrite with Transition'.
That's another way to accomplish this.
K

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

Best way to change row and/or cell colors other than doing it in sql

Similar Messages

Maybe you are looking for