Best way to clean dock connector area

I got chocolate (don't ask) in the dock connector area of my iPod Touch 4g. Now now the heck do I clean it out?!

Momto5 wrote:
using a blow dryer to melt it
that actually might be your best best. i would fixate the device in an angle so as to avoid any chocolate getting further inside, then use the blow dryer from a distance. chocolate melts in your hand so it doesn't take much heat to melt it
you might also want to get some (medicinal) alcohol and use another q-tip to clean the connector area once the chocolate has been removed.
good luck and let us know how it turns out.

Similar Messages

  • What's the best way to clean a sticky home key?

    I just purchased a brand new iPhone, and much to my dismay, something is causing the home key to stick. What's the best way to clean such an area? Can I do it myself, or is it best left to professionals? Thanks for your help.

    Not if the device is in warranty and the issue is a defect not caused by your negligence. Take it in and let Apple take a look at it. If you fool around with it yourself and really cause some damage, then your warranty will not cover the repair. Better to be safe than sorry.

  • HT201328 best way to clean iphone 30 pin dock

    What is the best way to clean the 30pin dock in the bottom of the iPhone/iPod/iPad please?

    Canned air & a soft toothbrush.

  • Best way to clean contacts on battery charging plug in area

    What is best way to clean battery plug in contacts area on iphone 4S

    Probably electronic contact cleaner used very sparingly on a foam-tipped swab. Cotton swabs would be likely to leave fibers in the socket so I would not recommend them.
    Regards.

  • What is best way to clean up startup disc?  What apps work?

    What is the best way to clean up my startup disc?  Are any of the clean up apps trustworthy?

    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a computer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto or Aperture, both have its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you are an iMovie/ Final Cut user, both apps have their own individual Trash location that needs to be emptied, too!
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    http://www.omnigroup.com/more
    Also, Find Any File
    http://apps.tempel.org/FindAnyFile/
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Moving iTunes library
    http://support.apple.com/kb/HT1449
    Moving iPhoto library
    http://support.apple.com/kb/PH2506
    Moving iMovie projects folder
    http://support.apple.com/kb/ph2289
    Things to consider before moving your iPhoto Library Folder to a new or external location like an external hard drive.
    If you make movies on any iDevices using iMovie for iOS,, then transfer the video footage, the IOS version of iMovie saves the footage as a movie file in IPhoto for IOS and will automatically get transferred to iPhoto for the Mac when you upload the video from your iDevice.
    Newer versions of iMovie will work and link those video files found in your iPhoto Library on your Mac, but those links can be lost if you move your iPhoto library and you will not be able to relink that video afterwards as the current versions of iMovie seem to not have a relink option for the video portion of the files (ironically, current versions of iMovie HAVE the ability to re-link the audio files from the video footage, though  (The inability to re-link the video files could be a possible bug or oversight in current versions iMovie).
    The lost video links show up as "blacked-out" video blocks with no content.
    Before moving the iPhoto Library
    If you make movies with iMovie using iPad or iPhone video then 'Consolidate' the files before you finish. This will gather (albeit by duplicating) all the relevant files in the project in one place. After consolidating/duplicating all of the audio and video footage to a seperate, independent location,it should be safe to move your iPhoto library.
    The potential way to circumvent this issues maybe to try and import  iPad and iPhoto video directly into iMovie which would be another solution.
    Good Luck!

  • How to clean dock connector port on Itouch 3g?

    What is the best way to clean out the dock connector port in the 3rd gen Ipod Touch? Its really dusty in there and I just wanted to clean it out. How could I do this without damaging anything?
    Also, the outside speaker doesnt seem to be that loud, even on full volume. Would cleaning the dock connector port help, or is there anything I can do to make it louder?
    Thanks

    I'd suggest just blowing it out with a can of compressed air if it's just dust and loose debris. Don't blast the connector, particularly not if the iPod is hot; the air stream can be cold which could crack things if it hits a hot surface. If there's contamination, careful cleaning with electrical contact cleaner (available at any electronic supply dealer) and a foam swap should suffice.
    Cleaning the dock connector would have no effect on the volume of the speaker. Whether there's anything else you can do I don't know assuming restarting your iPod doesn't help. But perhaps someone else will have suggestions.
    Regards.

  • What's the best way to cleanly stop Goldengate?

    For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
    stop er *!
    kill er *!
    stop manager!
    Thanks,
    Shankar

    shiyer wrote:
    For routine maintenance/upgrades what's the best way to cleanly stop GoldenGate? I don't want to wait endlessly. I use this currently and seen no issues :-
    stop er *!
    kill er *!
    stop manager!
    For routine maintenance/upgrades, just {noformat} "stop er *" {noformat} should be preferred; and when all processes are stopped, mgr can (optionally) be stopped. If you really are waiting endlessly for this to return, the real question is "why": then, perhaps there are other parameters that can be adjusted to make GG stop more quickly. (On the other hand, {noformat} "stop mgr!" {noformat} is harmless, the "!" simply prevents it from asking "are you sure?" before stopping the process.)
    I really wouldn't use "kill" unless you really have a good reason to (and the reason itself requiring the process to be killed should be analyzed & resolved). To "kill" a process shouldn't cause data loss (GG always maintains checkpoints to prevent this) -- but still it seems unnecessary, unless there really is something that should be killed. (Aside: I mean, I can kill -9 / "force quit" my browser and/or 'halt' my laptop every time as well, and it would probably be "faster" to -- but it can cause issues (and wasted time) upon restart: i.e., fsck, recover sessions, whatever. Same basic idea, imo.)
    There's a reason there are different commands to 'stop' processes (stop vs. stop! vs. kill). Just for example, "stop replicat !" causes current transactions to be rolled back; there typically is no reason for this, you'll just restart that txn when the process is restarted; might as well let the current one finish. And "kill extract" (I believe) will not warn about potentially "long running transactions" that can cause (painful) issues at startup (missing old archive logs, etc). There are probably other examples, as well.
    So if this really is "routine", then "stop", don't "stop!" or "kill". If there are long delays, see why first & see if they can be addressed independently. (This really is just a stock answer for a generic question, it would be irresponsible for me to answer otherwise :-) )

  • What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    What is the best way to 'clean up" a Mac that has been going for about 2 years.  I reset safari frequently but need to be sure stuff I don't want is gone.

    I'd gather by your "reset Safari"  and "clean up" you mean by sites you rather not have your mom see.
    Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find first, but need to reinstall Flash again here
    http://www.macupdate.com/app/mac/11076/easyfind
    http://get.adobe.com/flashplayer/
    OnyX run All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
    http://www.titanium.free.fr/
    CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
    http://www.piriform.com/mac/ccleaner
    Every web site knows your apx location.
    http://www.whatsmyip.org/more/
    To be sure to have a clean machine, a
    Restoring OS X - 10.6  "fresh install method"
    Restoring OS X - 10.7 - wipe and install
    is the only way as you only bring files back to the machine that you know what they are, everything else is removed.
    https://discussions.apple.com/message/16276201#16276201

  • What's the best way to clean the DVD player in a 2007 Macbook Pro?

    Hello All.
    Our older MacBook Pro from mid 2007 has not had its DVD Player cleaned.
    Now our Redbook DVD'S are "skipping over damaged areas"
    What's the best way to clean it?
    Thanx for your advice.

    take the files from the dvds and back them up as iso or just the files onto your computer. this way you wont have to rely on the optical drive.
    the safest way is to take it into the apple store to clean,
    but if there are danages on the DVD, you'll have to somewhere for them to buff it out. some gaming store will do this for you for a charge. You are better off taking the media off of the disks and saving them on your computer or usb stick, so on.
    hope this helps ;-)

  • HT3249 best way to clean display screen in ipad?

    What is the best way to clean display screen on ipad4?

    Hello earl6,
    The following article provides details on how to clean various Apple products.
    iPads
    iPad and iPad 2
    Handle your iPad with care to maintain its appearance. If you are concerned about scratching or abrasion, you can use one of the many cases sold separately. To clean iPad, unplug all cables and turn off iPad (press and hold the Sleep/Wake button, and then slide the onscreen slider). Use a soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don’t use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean iPad. iPad has an oleophobic coating on the screen; simply wipe iPad’s screen with a soft, lint-free cloth to remove oil left by your hands. The ability of this coating to repel oil will diminish over time with normal usage, and rubbing the screen with an abrasive material will further diminish its effect and may scratch your screen.
    How to clean Apple products
    http://support.apple.com/kb/HT3226
    Cheers,
    Allen

  • Best way to clean imac screen...

    Hi...
    wondering the best way to clean the imac screen - first time i have had a lcd screen
    thanks

    Nick,
    The user guide recommends that one dampen a lint free cloth with water and use it to clean the screen. There are a few commercial products that work well, including Monster iClean and iKlear. Be sure to avoid any product with alcohol or ammonia. Also, whether you use water or a cleaning product, spray the cloth, not the screen directly.
    Joe

  • Best way to clean the anti-glare display

    What's the best way to clean the anti-glare display?

    Use a damp lint-free cloth with light pressure.  iKlear has products if you are worried about damaging the screen by using chemicals other than water.  DON'T USE WINDEX!  It contains ammonia which can damage the screen.
    https://www.klearscreen.com

  • Best way to clean my system

    Is Mackeeper the best way to clean my MacBook Air system, or does Apple offer a free equivalent?

    MacKeeper is bad news. Avoid at all costs.
    In general, you do not need 'cleaning' apps.
    The daily. weekly and monthly Unix clean up scripts are run automatically, and unless problems arise that's all that's needed.
    The exception would be if you're doing lots of movie rendering or audio processing with large files being created and deleted regularly. In that case it may be necessary to defrag occasionally. Files up to 40MB (I think; I'll need to check that figure) are defragged on the fly by the system, so it's seldom necessary to do it unless you're using large files regularly.
    Cache cleaning should only be done as part of a diagnostic routine when a problem arises; it is definitely not required under normal circumstances. When it is necessary, booting into Safe Mode will usually be sufficient.
    I haven't needed to touch my iMacs with any of that for about 4 years now and they're still running sweetly.
    Biggest cause of problems is badly written third-party software, so check around before installing anything you're not sure of.
    If you feel the need for AV, which is not really needed either as your Mac's XProtect system should sort most malware as long as you keep up to date with security updates, then ClamXAV is safe and free.

  • Best way to clean dust out of workstations

    What's the best way to clean dust out of Power Macs and Mac Pros? Are there any specialised tools out there that can help? Historically I've wiped and vacuumed ours at work (without touching anything), but there must be a better way.

    Thanks, I was hoping you wouldn't disapprove
    Placed an order for this one today. Don't get the big paychecks some people do
    http://www.amazon.com/Data-Vac-MDV-1BA-Computer-Vacuum-MetroVac/dp/B000UVN646/re f=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B00006HR5F&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1MZ1G6R5SRDKVFS9C1Z4

  • Best Way to clean monitor???

    I want to know the best way to clean my screen on my MB Pro. Im afraid to clean it with anything because i dont want to mess it up... Any suggestion are welcome. Thanks in advance.

    Wood fibre as you describe would not be allowed into the food chain and hence, not allowed into the manufacture of kitchen paper towel.
    Sorry Ned but that is simply not true. Paper towels are a paper product. As such they are manufactured just like other paper products.
    From Bounty's Web Site FAQ #4: How are Paper Towels Made.
    We make Bounty from trees that are processed into pulpwood. Long fibers from softwood trees, such as pine and spruce, are used. After debarking, the pulpwood is turned into chips that are cooked. The natural "glue" that holds the fibers together is removed, leaving a fibrous pulp mixture. The pulp goes through cleaners and screens and is bleached to make it absorbent. The pulp then goes through a high-speed paper machine. A translucent substance called resin is added to the mixture to strengthen the paper when it is wet. The water is removed and the fibers bond to form sheets of paper. Two layers of paper are combined with a thin layer of adhesive and embossed to form many tiny air pockets that rapidly attract moisture. Diamond shapes are pressed into the paper to give it a quilted pattern that holds water. Designs made with water-based printing inks are added to some Bounty rolls.
    Orange Sodas contain wood resin as well. Just because it has wood fibers in it does not make it inedible, just a poor choice for cleaning monitors, lenses and eyeglasses.
    That being said I would never consider a paper towel to be edible either. Bleach is not exactly on the food chain nor are the inks used for patterned towels. Those two ingredients aside humans lack the enzymes to properly split cellulose molecules into sugar molecules. They will pass through if you don't ingest huge amounts..but edible? Not really.
    And I would not presume anything is edible simply because it comes in contact with food, so does aluminum foil, plastic wrap, wax paper, teflon, Silverstone and other non-stick materials. None of which are edible.
    Anyway a very off-topic debate over what makes a good or bad choice for cleaning screen
    BTW have you ever really looked at what goes into a hot dog? I eat them but I try really hard not to thing about it <g>

Maybe you are looking for

  • Implementing if-statement in jsp-sites

    Hi, I have a Vector in a jsp-Site as a property that I can refer to in the following way: <c:set var="mo" value="${requestScope.montag}"/> Now I want to test if the second element of this vector equals "0" or not. I tried things like: <logic:equal sc

  • FM to get the file from application server to presenatation server automati

    Hi! In my upload program I am egtting the error log file onmy application server directly. Is there a function module or a way that in my abap code I can mention to bring the file or transfer the file to the presentation server . As my program is bee

  • How to populate the multiline container?

    Dear experts, I am new to workflow. i have requirement for getting multiple records in structure. so i am using bapi 'SAP_WAPI_WRITE_CONTAINER'. i have created container which contains multiline records, but i am not able pass the value to structure.

  • OTL Timecard Customization !!!

    Hi All, I'm trying Customization to OTL Timecard i.e add two extra columns Project Name and Task Name. I got this ldt file (hxczzhxclayt0019.ldt) to customize. I did my changes to add these fields. I was successful in seeing these columns. But the pr

  • Exception on a specific cells...!

    I have created a query using exceptions. In the column I am having "calendar day" restricted with user entry variable and in my rows I am having a static formula in which I am giving a constant value eg 3, so now if I am creating an exception on this