Best way to click through series of photos on a page?

I'm building a site in DW CS3, on page will have a series of photos with captions for people to view.
How do I build the page so people can click through the photos, without having to create a page that has to load for each photo .
I would like the photos page to remain static but when people click 'next' or 'back' a new photo appears - or slides in, in place of the current.
Any help appreciated.

I just checked and it wasn't iPhoto 8 so maybe it was an earlier version of 9.

Similar Messages

  • What is the best way to scan and sort old photos in iPhoto

    What is the best way to scan and sort old photos in iPhoto?  They do not have digital dates.

    Hey Chicago Sue,
    Once you scan them and have them on your desktop. You should use Automator and assign the common IPTC tags to the images, so that when you do import them into iPhoto, they get recorded.
    Here is an example of an action in Automator:

  • How is the best way to remove something from a photo?

    How is the best way to remove something from a photo?

    This is difficult to answer without fully knowing what you are trying to do.
    That said, a few excellent and user friendly retouching tools include:  The Spot Heealing Brush Tool, Healing Brush Tool, Patch Tool, and the Cloning Stamp Tool.

  • What's the best way to import ALL of my photos (34k +) and then share?

    *Part I - importing:*
    I've got approximately 34,400 photos on a networked drive that I need to be able to control using iPhoto. I want these files to stay on the network drive, but also be controlled by iPhoto (organized by date). Right now our photos folder on the network drive is a bit of a mess, some folders are named by date only and some are named by the event itself ("birthday 2009", etc.). I want this naming to go away in place of the iPhoto method (by date only). FYI, I am familiar with how to get to the "original" and "modified" folders/files within the iPhoto Library.
    Question: Is there a way to get iPhoto to organize the photos (all by date) an leave the original photos on the networked drive? or do I need to:
    > Import ALL photos into my iPhoto with the "import photos into iPhoto Library" option checked (iPhoto copies all original files to my laptop hard drive)
    > Then manually move the file structure (all new folders created - by date) back to my networked drive
    > THEN...remove all photos from the iPhoto Library and re-import the newly organized photos from the network drive but unchecking the "import photos into iPhoto Library" option.
    Right now, both of our MacBook Pro's use iPhoto to access those photos independently of one another (each laptop does their own thing). This also creates problems because when files are imported on my laptop they are saved locally (on my laptop) and not on the network drive, same goes for my wife's laptop. Then she's not able to see those new photos.
    *Part II - sharing:*
    I'm also in the process of trying to figure out the best way to share all of our photos between our different laptops. Using the "sharing" function in iPhoto isn't ideal since that requires both laptops to be on.
    My understanding of sharing the iPhoto library itself (having it saved on the networked drive) between two laptops is that only one laptop can access this library at a time, or there's potential of having the files become corrupt (two laptops trying to access the file at the same time).
    Question: What's the best way to share photos between two laptops?
    Thanks in advance

    RONBO
    Is there a way to get iPhoto to organize the photos (all by date) an leave the original photos on the networked drive?
    Yes there is. But I don't recommend it as a way of working with iPhoto.
    Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
    Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
    However, you need to be aware of a number of potential pitfalls using this system.
    1. Import and deleting pics are more complex procedures
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    The problems arise when you change the path to the Files. iPhoto has no way of reconnecting that path and you could find yourself resolving aliases one at a time for all 34k Photos.
    Other apps, such as Aperture have a command to re-connect with the master files.
    FYI, I am familiar with how to get to the "original" and "modified" folders/files within the iPhoto Library.
    Good for you but never, ever access the files this way. Period. Within the iPhoto Package File there are no user sercviceable parts.
    All your work gets done in the iPhoto Window. Everything you need to do can be done from there - and must be.
    Then manually move the file structure (all new folders created - by date) back to my networked drive
    Never, ever break up the internals of the iPhoto Package File. You'll break iPhoto if you do.
    Also, what format is that Networked Drive? iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
    Question: What's the best way to share photos between two laptops?
    If simultaneous sharing is your goal then you need to use a Media Server app. iPhoto isn't one.
    The key really is the format of the NAS. IF you can make it Mac OS Extended (Journaled) then you can easily store your Library on it and share it. Otherwise you need to use another application for the job.
    Regards
    TD

  • Best way to update through testing repo

    As I am finding out, there are certain limitations to pacman. I enabled the testing repo to try out xorg 1.7, and to see if this could help with my X delay at startup. I enabled the repo and installed xorg, gcc, and among other packages. My problem is, I dont want the testing repo enabled by default. So I comment out testing from my pacman.conf, and now I cannot upgrade without dependency errors.
    Should I have used the ABS to install xorg 1.7...? Now I would like to disable the testing repo and be able to still sync and upgrade as normal. Am I missing something here...? Since I upgraded all packages from the testing repo, and now all my revisions are newer, and when I disable the repo to prevent any other updates, I am now unable to upgrade normally...  So... what is the best way to upgrade through the testing repo..?
    Last edited by StanIsTheMan (2009-10-23 10:15:00)

    Allan wrote:
    You can revert all packages to versions in [core]/[extra] by using "pacman -Suu".  Otherwise, you need to wait for these to move out of [testing].
    What problems are you observing?
    I didn't necessarily want to downgrade all of the packages I upgraded through the testing repo. It was after upgrading the packages from the testing repo, and then commenting out the "testing"  in pacman.conf, and then trying a normal 'pacman -Su'. I was then receiving errors on dependencies that were not met, and was refusing an upgrade. (which i can understand, since the testing db is being ignored, and the revision numbers are different and would cause conflicts)
    I have reverted back to the earlier versions from the upgrade with a 'pacman -Suu'  Now what is the proper way to upgrade just xorg..? Should I use the ABS..? I dont want to enable the testing repo, because if I do, It wants to pull in all of the testing branch that I dont want. So really my original question is... What is the bet way, or proper way to upgrade a package from the testing branch...?
    Last edited by StanIsTheMan (2009-10-23 10:40:00)

  • What is the best way to click on a thumbnail image

    What is the best way to click on a thumbnail image and have a
    large version of the image appear above it?
    Frames?

    divaPOPgold, a Dreamweaver Extension, is another option:
    http://divahtml.com/products/divaPOPgold/open_popup_windows.php
    quick examples:
    http://209.200.94.134/divaPOPgold_demo.html
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Newbie Question: Best Way to Set Up Library and Photos?

    Hello, all — I've been using Aperture for several years now, but I've been doing so with no structure or planning. Now I've got an Aperture library that is nearly 300G, mostly unorganized, and slow —  and I'm ready to clean things up. My general question: "What is the best way to organize Aperture Libraries/Photos?" Right now I've got one library and about 90% of the photos are stored "inside" Aperture.  I'd like to free up space on my internal hard drive and move my library (or libraries) and photos to an external drive.
    So my big questions are:
    "Should I have more than one library?"
    "Should I store my libraries on my internal or external drives?"
    "Should I store my pictures inside our outside of Apertur?" and
    "Starting with the library I already have, how should I go about making these changes?"
    I know these are all big topics and a lot to ask, but I'm feeling lost and would like at leat some pointers to get started.  I guess I should also point out I do limited editing of my pictures: the vast majority are downloaded from my phone and kept as-is in Aperture.
    THANKS!
    Mark

    So my big questions are:
    "Should I have more than one library?"
    That's up to you of course but there are pros and cons to multiple libraries.
    The biggest con is that by splitting up your library you cannot search all your images at one time. So say you split by year,  you can no longer get all images of Aunt Sally at Bobby's Birthday through the years. You would need to go into each year library, do the search and export the images.
    Also having multiple libraries can complicate housekeeping.
    On the plus side the libraries are smaller but there isn't a lot to be gained from smaller libraries. Aperture is able to handle fairly large libraries.
    "Should I store my libraries on my internal or external drives?"
    Again it's an individual choice but as a rule you want your libraries on the fastest drives you have. Up until the release of USB 3 and Thunderbolt that meant the internal drive, now you have more latitude.
    So old system I say keep it internal. Newer system, if you can afford the USB 3 or Thunderbolt drives it's your choice.
    "Should I store my pictures inside our outside of Apertur?" and
    Again it's a users choice. Keeping the originals managed (inside the library) greatly simplifies backups. You backup the library the originals are backed up also.  If the originals are referenced you need to make separate provisions for backing them up.
    A plus for having referenced originals is that you can store them on slower media and save space and money. Again before the new Macs this was more of as issue as you would want the library on the internal drive for speed but to save space you could put the originals on slower external drives.
    The other reason to store the originals referenced is if you need to access them with another application. If they are managed and in the library it really isn't feasible to access them from another application.
    "Starting with the library I already have, how should I go about making these changes?"
    Well step one is to make sure you have good working backups of everything. There is a good chance you will not get this right on the first shot and being able to just wipe everything out and start again will be both a big help and a great stress reliever.
    Other then that you need to decide how you what the final setup to look. You could make some teat libraries and try out different setups to see what feels better for how you work.  This will also let you play around with the commands and steps you will need to do when you do it for real.
    Good luck and if you take nothing else away from all this pay attention to the part about having backups before you start. You will be very happy you did.
    regards

  • Best way to iterate through multiple variables?

    I need to iterate through three different variables (arrays), and was wondering what the best way to do this would be? I am more familiar with C than I am with LabVIEW at this point, but am getting up to speed on LabVIEW pretty quickly. Normally in C, I would just create three nested loops, but I am wondering if this is the best method in LabVIEW or not. I could use a state machine I think, which would give me some flexibility in re-arranging the order of iteration or adding or subtracting variables easier than working with nested loops I think...anyway, I'm open to suggestions.

    R.Gibson wrote:
    I need to iterate through three different variables (arrays), and was wondering what the best way to do this would be?
    Arrays are not "variables". can you be a bit more specific.
    R.Gibson wrote:
    I could use a state machine I think, which would give me some flexibility in re-arranging the order of iteration or adding or subtracting variables easier than working with nested loops.
     Why does the order matter? Rearranging in what way? If you do autoindexing, it will just iterate over all elements until it runs out of elements.
    ... And again, what do you mean by "variables"?
    It would help if you could show us a VI containing some typical input data in controls (make current value default, save) and explain what kind of output you expect.
    LabVIEW Champion . Do more with less code and in less time .

  • Best way to loop through multiple rows to search for a count result

    I have a script where I'm trying to find a Rollup row without any children. I have created a SQL statement to do this, but I can only input one point at a time. If the count is greater than 0 then i'm good to go. If the count is 0 then I want to know about it.
    select count (*) from (Select * From ESSBASE_FCS.Ham
    where hier_pt like (Select substr(hier_pt, 1,8)||'%' as hcy_pt
    From ESSBASE_FCS.Ham
    Where Hier_Pt = '412375....')
    And Cctr_Or_Rollup 'Rollup')
    What is the best way to develop a SQL script that searches through all my Hier_pt's and return everything with a count of 0, instead of manually inputing each hier_pt at a time?
    Thanks for any help.

    Hi,
    Please read SQL and PL/SQL FAQ
    Please provide table structure, sample data and expected output.
    Additionally when you put some code please enclose it between two lines starting with {noformat}{noformat}
    i.e.:
    {noformat}{noformat}
    SELECT ...
    {noformat}{noformat}
    I noticed also that you have posted the same question here: {message:id=10678000}
    If you move your question to another forum please mark the previous question as answered.
    Regards.
    Al
    Edited by: Alberto Faenza on Nov 7, 2012 5:03 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • What would be the best way to trigger a series of cascading SPD workflows ?

    I have a request to have security setup on a series of folders..
    but the start of the security has to wait until the new site workflow is completed,  then once the site is available then the next workflow sets the security on the 1st folder  then once the security WF on the 1st folder is completed, then the
    2nd workflow starts,  and sets up the security for the 2nd folder, then once that workflow  is done then the 3rd folders security workflow is triggered and security is setup , then the 4th WF starts once the 3rd WF is completed, and then the security
    is set on the 4th WF, and then once it is completed then the 5th WF is started... this pattern continues until the last folder security is setup and then the WF to email me is triggered..
    basically they go like this
    1WF  > 2WF > 3WF > 4WF > 5WF > 6WF > 30Wf completed cycle of Security Setup
    What would be the best way to set this up to have the series of workflows trigger after a WF is completed

    Hi,
    According to your post, my understanding is that you want to trigger a series of cascading SharePoint workflows.
    You need to set parameter: Processed = No/false in each workflow to trigger the next one.
    It is similar to the For Each loop workflow in SharePoint 2010.
    For more information, you can refer to:
    How-To: For Each loop with SharePoint Designer 2010 Workflows to update multiple items
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • What is the best way to loop through TextFlow to find InlineGraphicElements?

    I have created a TextFlow and the images load fine, but I would like to loop through and update all the 'source' properties to change the images.  What is the best way to locate all the InlineGraphicElements in my TextFlow?
    Thanks!

    leaf = textflow.getFirstLeaf();
    while( (leaf = leaf.getNextLeaf()) != null)
    if(leaf is InlineGraphicElement)

  • Best way to share catalog for picking photos?

    Hi Folks,
    I have photos from a couple field campaigns, and my PR department here is interested in using some of them.  My question: what's the best way to share some sort of catalog with them so they can pick the photos they want?  I could export all my photos in small format, then they could send me the filenames I guess, and then they would create a list of filenames, and I would search for and export those ones.  Is there a better way?
    thanks!

    You don't need to install Picasa.
    You can do a number of things:
    Upload them to any of a number of sites - flickr, Picasa (the site, not the app), SmugMug etc from within iPhoto
    You zip them and send them via services like YouSendit
    You can use DropBox
    You can burn them to CD and send that: export them from iPhoto to a folder on the Desktop: burn that with the Finder.
    Regards
    TD

  • When clicking through a yahoo photo gallery, firefox freezes into a white screen.

    On Windows 8. Problem only started with latest release of Firefox. When I click on the white screen I go back to the page that has the gallery but it reloads from the beginning. Clicking through a second time it goes further into the gallery but inevitably freezes again.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • What is the Best Way to Display a ClobDomain Field on a jspx Page?

    I have a ClobDomain field in my table that I need to display in my jspx form. What is the best way to go about this? I can't just drag and drop the field from my View and place it onto the form.
    Thanks.

    Apply a swap image behavior to the image. DO NOT ENABLE THE
    AUTOMATIC
    RESTORE.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "BillC-Bos" <[email protected]> wrote in
    message
    news:gp0utj$rmk$[email protected]..
    >I have what I imagine is a simple challenge but I after
    reviewing the forum
    >and
    > the DW workspace it seems that the technique I might try
    in GoLive are not
    > really the best way to go.
    >
    > I have a small graphic that when clicked should change
    to a different
    > graphic
    > to indivate that the site's visitor already clicked that
    graphic (which
    > links
    > to a detail page). There are many detail pages and the
    solution to
    > providing
    > navigation from one main page drastically limits the
    amount of information
    > provided on the "master" page making it necessary to
    provide some way to
    > indicate to the visitor that they already selected that
    option - so they
    > can
    > either avoid that link or return to it if they wish.
    >
    > So the "master" page will show an image (icon) that will
    change once the
    > visitor has clicked it. I am not sure how best to make
    this happen and can
    > use
    > some help or guidance. Thanks in advance for you help.
    Be well.
    >
    > Bill C
    >

  • Way to click on link to open in new page?

    Anyone figure out a way to open a link in a new page? I have a couple of pages I use as "home" pages and I'd like to be able to tap and open a link in a new page to keep the existing page at its site.

    I haven't found a way yet. It depends on how the original page was coded.
    If it's a page you control, try adding the following to the link anchor tag:
    target="_blank". If not, sorry. Maybe it's something they'll add, but honestly, I doubt it (my personal opinion). It would add clutter to a portion of the interface that's working quite smoothly right now. There's no precedent for a 2-fingered tap like holding down a key, and holding down on the URL for a pause already does something.
    My two cents. Sorry! I agree it would be very useful.
    Aym

Maybe you are looking for