Best way to configure Time Capsule with Thomson TG782T modem(Telstra)

Hi there
I am looking for the best way to configure my Time Capsule. I have an ADSL connection and use a Thomson TG782T wireless modem from Telstra as my internet connection. It is plugged into my iMac via ethernet. It also provides a wifi connection for iphones, ipads etc.
I also have a Time Capsule and am looking to use it to extend the wireless network. It doesn't seem to want to do this for me. I am guessing that the Time Capsule needs to be in bridge mode, but don't want it to create its own wireless network. Does this make sense? Any help gratefully received.
Thanks!

I also use TG782T.. although I hacked it to use on non-telstra ISP.. and so I can access voip.
But you cannot use TC to extend the wireless .. sorry that is not possible.. the Thomson is actually way behind and the only service it offers to extend is WDS and with WEP security.. so unless you plan to use G wireless and WEP .. don't even think about it.
Bridge the TC and plug it into the Thomson. Create a wireless network of identical name as the Thomson.. actually the Thomson uses a silly name.. just change it to something short and sweet.. TG782T would be excellent. You can also lock the wireless channel instead of auto and use the highest level possible security with your own password.. again not the Telstra one..
so you end up..
Now run the same settings on the TC.. go to the wireless page.. set to create a network and use same name.. same security level same password but different channel.
Your client computers will now connect to whichever device has the stronger signal.. this is called roaming network.

Similar Messages

Configuring Time Capsule with a Fiber Modem

I had installed a Fiber Modem FIBERHOME AN5506-04 today. But since then, I have to choose. Or I use the Internet via AirPort/TimeCapsule or I use TimeCapsule to make my backups.
The configuration needed was DHCP/NAT at TimeCapsule, fixed IP. If I try to use Bridge I gain access to Time Machine, the light turns green, but have no access to the internet; when, as assisted by the support of the provider, I use DHCP/NAT, I gain access to the internet, but lost access to Time Capsule, my MacBook Pro can't find the disc.
My configurations using static IP are:
IP:172.21.2.190
subnet mask: 255.255.255.252
Gateway: 172.21.2.189
DNS:
187.94.192.61
187.94.192.62
Router Mode: DHCP/NAT
DHCP INTERVAL: 192.168.0.2 to 192.168.0.100
The AirPort recommends to change to Bridge mode, but if so, I lost access to internet. How to solve these issues? Some clue?
Thank`s!

Here is the Traceroute you requested.
MacBook-Pro-de-Marcilio:~ marcilioribeiro$ traceroute 8.8.8.8
traceroute to 8.8.8.8 (8.8.8.8), 64 hops max, 52 byte packets
1 192.168.0.1 (192.168.0.1) 1.767 ms 1.039 ms 2.865 ms
2 172.21.2.189 (172.21.2.189) 1.787 ms 1.938 ms 1.992 ms
3 10.13.13.1 (10.13.13.1) 1.889 ms 2.213 ms 1.818 ms
4 10.5.5.1 (10.5.5.1) 2.096 ms 21.678 ms 3.055 ms
5 ae0-739.edge-a.bhe515.ctbc.com.br (201.48.42.114) 33.612 ms 27.124 ms 47.453 ms
6 et-0-0-4.ptx-a.spo511.ctbc.com.br (201.48.47.142) 50.430 ms 36.489 ms 47.656 ms
7 et-2-0-0-0.border-b.spo511.ctbc.com.br (201.48.46.33) 27.737 ms 48.249 ms 25.559 ms
8 201-048-044-002.static.ctbctelecom.com.br (201.48.44.2) 47.503 ms 37.206 ms 47.797 ms
9 209.85.244.43 (209.85.244.43) 23.639 ms
    209.85.254.11 (209.85.254.11) 46.135 ms 34.153 ms
10 209.85.244.79 (209.85.244.79) 93.733 ms
    64.233.175.5 (64.233.175.5) 82.208 ms
    216.239.43.47 (216.239.43.47) 86.880 ms
11 72.14.234.185 (72.14.234.185) 85.647 ms 97.102 ms 85.039 ms
12 * * *
13 google-public-dns-a.google.com (8.8.8.8) 75.098 ms 84.913 ms 74.675 ms

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

Configuring my Time Capsule with a Comcast modem

Configuring my Time Capsule with a Comcast modem. I had an outage and the time capusule had a pop up that said change something, I did, didn't fix the problem, but now I can't get wireless networking, but the MacPro connected by ethernet works fine.

Redo the setup.. press and hold the reset for about 10sec and redo it.
This time set wireless using simple name, no space and pure alphanumeric.
Lock the wireless channels as that also helps.
Wireless on an old Gen1 can get pretty tired.

Help with Time Capsule with a new modem

Hi,
I did a search and couldn't find what I'm looking for. What is the easiest way to setup my Time capsule with a new modem? I will be using wifi with the time capsule. I just got a new modem and the time capsule keeps flashing a amber light. It was working off wifi before I got the new modem.
Thanks, Jerry

There is only one right value for wireless now. Which I did list in the instructions.
WPA2-PSK (AES) for the arris.
WPA2-Personal for the TC.
Did you reboot everything when you disconnected the ethernet.. so the computer and TC can reallocate the IP addresses. This is important.
Reboot everything when you rearrange networks.. always do it.. even I am forced to do it.
Reboot in this order.. from off.. everything off.
Modem.. wait 2min
TC.. wait 2min
Computer.. this will now pick up a new IP from the whichever wireless is stronger.. should not make any difference if it is the TC or the Arris.
Now see if the TC is available in airport utility.
If it fails .. reconnect it by ethernet to the computer.
Give it a different wireless name .. ie the Arris and the TC will have different names.
And you are using "create a wireless network" in the TC.. no other option will work.
Update the TC so the setup is saved.
Unplug the TC from the computer and plug it into the Arris..
Now reboot everything.. sorry.. but it is the easiest way to clear up old settings and get everything going again.
Now in the computer you will need to open the airport and find the TC wireless.. and then you connect to it.
Once you connect direct to the TC you should have no trouble.
You can setup and fix any issues.. there are always a few silly things.. password default or wan setup .. choose ignore or change settings.

Config Time Capsule with ZyXEL DSL modem/router

Hello everyone,
I have been beating my head about this for the last week or so and it had drove me to drink (Really short drive by the way). I have CenturyLink DSL Service with a modem that they provided (ZyXEL PK5000Z), this is a modem/Wi-Fi router. What I am trying to do is have my Time Calsule be the Wi-Fi router so my AirPort Express can extend the network and do what it does to get my devices connected. When ever I have my Time Capsule connected to the modem, it will drop the internet connection within 10 min to 30 min, but when I have the modem wired to my Mac it stays connected for days. I have tried many different configs and putting the Time Capsule in "Bridged" mode with the ethernet cable in both the internet port and LAN port... same problem. If anyone could please help me get this setup, that would be amazing... plus this would save me from having to call the CenturyLink Tech Support line.
Thanks,
James

Strange things happen.. the TC should be fine bridged to the Zyxel.. as long as you turn off wireless in the Zyxel and only use wireless in the TC.. you must create the wireless network.. not join a network.. people try to do both at the same time and end up in a mess.
Then you can check the extend wireless network in the TC and airport should be able to extend it.
But I would also add the following.
Fix radio channels.. if you have difficulties the less auto the better.
Use SMB names ie short, no spaces, pure alphanumeric for everything but particularly wireless.
And use a different name for 5ghz.
Use only WPA2 Personal security.
If you lay off the grog for a bit it helps keep the mind clear.. to think through the things.. although I do understand the frustration.
Let me suggest you post all the setup screen shots and that can help us loads to figure out if you are making a mistake.

Is there a universal way to configure time capsule for use with magic jack plus?

I've got the magic jack plus connected to my time capsule. Works most of the time, but lately it's been dropping calls or I'll get error messages stating to check the internet connection. Most say its related to the router settings.

Note I do not own magic jack but it looks like a standard ATA voip adapter.
How is the TC setup in the network? ie is it bridged or main router.. Is there another router?
Being a non-apple product you will do better sticking with SMB compliant network names.. ie short no special characters no spaces.. Apple by default break these rules.
Also you may have port forwarding issues.. apple do not use upnp most windows and non-apple products will expect and so you might have to open the required ports not just for sip but the actual call RDP packets.
Even if you do open ports apple routers often break port forwarding. You might find it is easier to use a modem router or alternative standard router and bridge the TC.
Look at posts that deal with issues which will be common with airport extreme.
https://discussions.apple.com/thread/3662236?start=0&tstart=0
I would say it is not working because you have not forwarded the required ports.. or it just doesn't like Apple routers.. plugged into the Mac, the networking is handled by the Mac.. and is able to auto open ports.. non-apple products cannot generally do that.

Configuring Apple Time Capsule with Netgera DG834N modem

I'm configuring a wirless system with:
a 3 year old Netgear DG834N modem / router set to modem only mode
a 6 month old Apple Time Capsule
a new Netgear WNDR4500 router
Previously I'd linked the ATC in bridged mode to the DG834N with the latter in modem + router mode and all was fine with no conflicts between the ATC and DG834N.
Questions:
what is the best mode for the ATC now that it links to the modem only mode DG834N?
do I need to run each on separate non-conflicting channels for both 2.4Ghz and 5Ghz bands?

OK.. sorry I should have twigged with the TNZ.. pppoa is a b pain in the nether regions.. that should get through all the apple filters for language.. but privately I would fill it out with the aussie slang version. In Australia all our ISP use pppoe and some allow pppoa as well. You cannot bridge to pppoa.. the nature of the beast is that it has to happen on the modem.. ie the ATM interface.
There are tricks to get around it.
1. Obviously just use the modem router as your main router.. that solves the problem but as a router,, it is lousy. Netgear build all their modems with minimal interface. And it is slow.
2. Since you cannot do full bridge you can use half bridge.. this used to be common but not so much now. It has some issues with dynamic IP and lots of linux based routers spit the dummy. (almost everything is now linux due to free source). Look up the 834N if it is possible to do half bridge and give it a try .. Maybe with DGTeam firmware.. there are alternative firmware to some netgear models since the netgear one is so devoid of functionality. Other modems do support it.. it is not gone but well down the list now. (FYI: the problems with half bridge is the IP rotates but the client doesn't have the IP updated until the local lease time expires... so lease is set to ridiculously short times to compensate. )
3. DMZ.. this is double NAT but without a lot of the bad effects.. A router in dmz of another router simply passes all packets both ways as if it is a bridge. The problem is speed.. packets only go as fast as the router can handle them.. Adsl aint that fast so it isn't an issue that way.
More importantly, you are still filling the NAT table of the modem's router, so it can fall over with too many connections.
4. There are two tricks but Netgear would have to be replaced. Also the router has to support pptp to pppoa relay. Not sure if the WNDR4500 will but it is used by dd-wrt if that is possible. Pain to setup but very solid.. Thomson speedtouch and later models all support this. You make the connection to the modem via a pptp tunnel..which is able to pass the authentication.
The Draytek also support a trick using pppoe to pppoa relay.. look at models like 120.. This is different to the above but using a similar trick. (There are a few other brands to offer it but you can see draytek have specialised in it.. it is common issue in uk which is a big market for them.)
http://www.draytek.co.uk/products/vigor120.html
Note specific reference to apple routers.
5. One to One NAT.. this is true NAT.. what is normally referred to as NAT is NAPT. One public address to many private addresses. True NAT is like DMZ.. it does pass through the router.. but all packets are simply passed from one public to one private IP.
This mode is available on speedstream models like 4200.. 6520... bit ancient now.. but they worked really well. Most people looked at the interface and had no idea what NAPT and NAT stood for. And Siemens wasn't bright enough to explain it.
Thomson has it.. but hard to setup. Draytek have most modes although not tried in their modems.
That probably covers the field.
Most people resign themselves to 1.
I wouldn't bother with netgear forum.. but look at forums for your Telecom NZ and look at solutions people are using to run a router behind the pppoa authentication problem.

Is Airport Express the best way to extend Time Capsule wifi network?

I have a Time Capsule which I use for wifi as well as backups. I would like to extend its wifi range. Is an Airport Express the best way to do this? Or would an Airport Extreme get better range? Thanks.

Welcome to the discussions!
You did not mention whether you are trying to extend using wireless only, but we'l assume that this is the case.
The AirPort Express and the AirPort Extreme have the same range, so there would be no difference in performance between the two devices.
If you have a newer dual band Time Capsule, a dual band AirPort Extreme would extend both bands...IF....the AirPort Extreme is positioned where it can receive a strong signal from the Time Capsule. The AirPort Extreme would also provide you with 3 ethernet ports if you needed to connect any ethernet devices.
The AirPort Express will extend one band, as it is a single band device, but that may be all you need. Since the AirPort Express can plug directly into an AC outlet, it is usually somewhat easier to place the device where it will be needed.
A good location for an extending device is a point that is about 1/2 to 2/3 the distance from the Time Capsule to the area that will need more wireless coverage, assuming there no major obstructions in the signal path. The idea situation would have the extending device placed where it has close to a line-of-sight relationship with the main router.
Post back if you need configuration details on the extending device, or if you need more information.

What is the best way to connect time capsule to bt infinity

I have bt infinity and want to connect my time capsual to it does anybody know what configuration would get the best connection?

I have just had Infinity installed and also have a time capsule.
The way I have set it up is as follows:
Get rid of the HomeHub they provide (to save electricity).
Need to keep the VDSL2 modem (the other box that plugs into the phone socket).
Plug the VDSL modem into the time capsule WAN port directly.
Go into time capsule manual setup via the airport utility
On the internet settings tab:
Connect Using select PPPoE
Account Name enter '[email protected]'
Password and verify password enter a single space (as in press the space bar once). There is no password, but for some reason it will not accept no password at all, and won't negotiate properly.
I don't have a service name set, and 'connection' is set to always on' with 'disconnect if idle' set to never.
Works perfect, I then use the time capsule as the wifi hub and all my devices connect to this.

What is the best way to extend time capsule range?

Hello there:
I was wondering what kind of set up do people have in their house to ensure a good coverage all around the house? I've tried several options and none seems to work correctly. I've tried Time capsule + airport base, I've tried two time capsules, but didn't get too far.
Thoughts?

Do you get good coverage all around your house? how big is your house?
The size of the house is not really the issue nearly as much as the obstructions in the signal path. For example, a wireless signal will easily travel 100 feet with no obstructions slowing down the signal.
A "typical" wall of sheetrock and 2 x 4s in a home will on average, absorb about 15-20% of the signal. So, with 3-4 walls in the signal path, it is not hard to understand why a signal will likely be much weaker at the other end of the house, or at the point where you add an "extending" device.
A ceiling is usually about twice the thickness of an average wall or more, so you'll have to take that into account as well if you have multiple stories.
The "extending" device can only repeat the signal that it receives, so if it gets a weak signal, it "extends" a weak signal.
The "best" way to extend is connect the two wireless devices using an Ethernet cable, which may not be easy depending on the construction of the home, but it is by far, the "best" way to provide more wireless coverage to remote areas that need it.

Best way to share Time Capsule iTunes folder between multiple PC's & users?

We are happily using a 2T Time Capsule and Genie Timeline to back up computer files. However, our main iTunes computer is a laptop which is quickly running out of disk space. So we hope to share an iTunes directory on the Time Capsule between two pc's with multiple users.
Q#1) Does each windows user need to connect as the same Time Capsule user? Or is there a way to share a folder amongst several Time Capsule users? (We have several Time Capsule users set up, but I don't know how to configure it so one can see files created by another.)
Q#2) Once the shared directory is established and everyone can see it from both computers, is this the correct procedure:
a) On the main iTunes pc, change the iTunes Media Folder to the shared Time Capsule folder
b) Consolidate the library
c) Import music files from the other pc as necessary. (Can we do this? Some are protected aac files.)
d) Change the iTunes Media Folder on the second pc to the shared Time Capsule folder. (How do you grant permission for the other pc to use the shared iTunes Media Folder?)
Apologies if I all this has been answered already. I was unable to find it in my searches.

Hello patrickmcguire. Welcome to the Apple Discussions!
Check out this theAppleBlog entry to see if it addresses all of your questions: Using Time Capsule as a Media Drive

HT2497 how should i configure time capsule with time warner arris as separate networks?

i have been using the time capsule 4th generation with my home network but my connectivity seems to sometimes disconnect atleast with my macbook pro i always seem to be having to go place my cursor on the wifi logo to keep it consistent? i could jsut try and continue but really want a simple fast direction in what to do and how to configure this so that i only have access to my time capsule and network while my family may have access to the arris time warner cable network... ive heard of bridging and have had it so that my router be a bridge. whats the benefit and actual meaning of bridging in lame terms? i understand that bridging means it just runs internet through that device... so that device isnt setting any ip adresses? anywho ive messed around with the twcale internet site a bit hope i havent messed up too much. when i called time warner cable today they said they could only assist me with the arris side and not advise me with time capsule config... now i want to call apple but it seems i have to pay to call them? wow. and i bought the time capsule and best buy and was on hold for 10 minutes while being hung up rght when i seemed to be about to be helped. oh joys. anywho... help please?

We recently switched back to TWC here in the valley, att was horrible. We get 22.6 download and 2.24 uploads usually, however...we too have been having issues with the internet becoming sluggish throughout the day, not just at peak usage times. We have 2 computer plugged in directly and 3 others wireless but not on at the same time all the time.
I haven't gone into the Arris this time around, but am thinking there are settings that are screwed up. We have been using the Time Capsule's wireless connection and it is terribly slow. I'm not sure if there is a problem with the settings there or what.
Anyone, anyone, Beuler, Beuler?

What's the best way to use Time Capsule through Extended Wireless Network?

I am operating four computers, three Apples and a PC. All the Apples use Snow Leopard. I have a large house where the cable company's modem and internet access is located downstairs at the far back of the house. That is where I have a 2Tb 802.11n Time Capsule (TC) connected to the modem by ethernet cable. My iMac is there, connected to the TC by ethernet cable. In the middle of the house, also downstairs, I have an Airport Extreme (802.11n) operating as a wireless bridge. Upstairs in the front of the house (very far from the TC and closer but not very close to the AE) I have a home office. That is where my other two Apples--a MacBook Pro and a MacBook Air--are usually located. The PC is located in a bedroom directly above the TC and wirelessly connects to it. At all locations, I get four radio signal strength bars. However, I am not sure that the AE is doing anything, because I get four bars regardless of whether the AE is plugged in, or not. When it is turned on, Airport Utility on all computers shows both the TC and the AE, but I have not been able to find which Airport ID I am actually connected to.
From my home office I do temporarily lose my internet connection from time to time each day, but the connection recovers usually within seconds. I assume this reflects occasional interference or other loss of wireless signal in the distant home office, although I do not see the radio bars diminish to less than the four bars.
All three Apples are set up to use the same TC for backup into Time Machine. However, I have been getting errors on the laptops operating in the home office (a long way from the TC and perhaps connecting directly over wireless or perhaps wirelessly through the AE bridge. Some messages are to the effect of being unable to backup, and others more recently report errors. I think that either due to connection interruptions or merely by suspending or turning off the computer while in the middle of backing up, errors in the Time Machine files were created. I have been unable to delete more than a few of the 8Mb sparsebundle bands so that I can completely get rid of one of the sparsebundles for the MacBook Pro. I was able to get rid of the other sparsebundle for that computer and also the sparsebundle for the MacBook Air. I am reluctant to erase the entire TC, because it has been working for the directly connected (by ethernet cable) iMac sitting right next to the TC.
So, I am wondering what is the experience of others who are trying to use TC successfully from computers located a long distance from the TC with either a direct wireless connection or a bridged wireless connection through an AE or other bridge.
And does anyone have good ideas about how to delete the sparsebundles effectively? I read the various questions and answers in the support community, but so far nothing that I have tried based on those messages seems to work. It seems that when all the Time Machines are set to "Off" and the sparsebundles are expanded to show the individual bands, we ought to be able to delete them fairly expeditiously. Sometimes, I can delete one band fairly quickly, but then the second band will hang forever. More often, I can't even delete the first band.

Thank you, Bob. I followed the procedure you stated. My AE is working. I did register its BSSID when I put my laptop next to it. This is also the BBSID I am getting when in my home office at the far end of the house from the TC. This means I am using the extended bridge AE when working and trying to use the automated backup feature in Time Machine. Do you think I should turn off Time Machine on these laptops when they are in the home office, and bring them into the room with the TC occasionally to have a better connection (wireless to TC or by connecting an ethernet cable) when trying to make Time Machine backups for them?
Interestingly (in contrast to the exact match of BBSID's for my AE), when I compared the BSSID for my TC in Airport Utility to the BBSID of the TC using the option key and the fan shaped Airport icon, the BBSID's matched except for the last two digits. In Airport Utility, they are 2F. In the fan shaped Airport icon they are 30.
Also, the AE signal, being centrally located on the first floor of the house, seems to be the one most in use. When I walked my laptop away from the AE all the way back to the TC, the laptop automatically switched over to the TC only once. Most of the time, the laptop is still connecting wirelessly with the AE. To switch back to the TC, I have to turn Airport off, and then turn it back on again.
I don't know how efficient or inefficient the Time Machine is when connecting to the TC indirectly through an AE bridge.

Best way to access Time Capsule from the Internet?

I wanted to see if anyone knew of a program or setting I can use in order to access Time Capsule from the internet? I know that probably I will not be able to at this point access it directly, even though it is connected to the internet through my modem, but I do have a Mac at home that is connected to Time Capsule. Isn't their a way that I could connect to the Mac, but not through Back to My Mac, that would show Time Capsule as connected to it, so that way I could access the files? Any ideas would be appreciated.

It is possible to mount the TC as a network hard drive when outside your regular network.
1) You will need to reconfigure your router to forward the ports used for AFP (by default 548) to the Time Capsule.
2) Then when outside the network make sure Finder is active, press Apple+K to bring up the 'Connect To Server' dialog.
3) Input the WAN IP address of the network to which the TC resides on.
4) You will be asked for the password used to access TC.
5) The TC should appear as a mounted drive.
It is then possible to access files on the TC as well as do a TM backup. To make life easier you can drag the mounted TC into your dock for easier access in the future.
However, it is obviously recommended to use a strong password to protect the TC (configurable using Airport Utility in the 'Disks/File Sharing' tab). You may also need to use a service like DynDNS if your network does not use a static IP address.
But I am using my home networks' Time Capsule successfully from the office.

Best way to configure Time Capsule with Thomson TG782T modem(Telstra)

Similar Messages

Maybe you are looking for