Best Way to Connect my REAL electric guitar to my computer? Please Help

Anyone know how to Connect my REAL electric guitar to my computer? Please Help, thanks!

HippeeBoy wrote:
Anyone know how to Connect my REAL electric guitar to my computer? Please Help, thanks!
http://www.ikmultimedia.com/stealthpedal/features/
I'd previously purchased the Stealthplug by IK and really liked it. I wanted a wah/volume and got the Stealth Pedal. The current promo going through the end of December is a 4 for 1 special. If you by a qualifying product from IK, you will receive free downloads of IK Software. The free downloads are not partial or limited version of IK stuff but +full versions+.
http://www.ikmultimedia.com/NewsDisplay.php?Id=2373
For instance, I bought the Stealth Pedal packaged with AmpliTube Metal for $199. Once I registered the software and pedal, the registered user area you now have access to as a registered IK customer makes available the full software version of other IK stuff. For me, I downloaded AmpliTube Jimi Hendrix, Ampeg SVX and AmpliTube 2. Each full version is worth about $200 ( http://www.sweetwater.com/c707--IKMultimedia--Virtual_Instruments_Guitar_andBass ).
So, anyway, a good deal for lots and lots of amps and an interface. I've had the Stealthplug since March and just got the pedal last week so I'm still breaking that in. However, very sturdy feeling and worked very well.
Sure, it's $200 but you get tons of amps and I have to say (so far), they sound pretty good too. I haven't been through all of them much less even started on the Ampeg Bass stuff but I'd still be comodrtable considering myself an IK fanboy.....

Similar Messages

How to connect an acoustic electric guitar to macbook pro

whats to best way to use an acoustic electric guitar with garage band without a buying additional gear, macbook pro. thanks

"whats to best way to use an acoustic electric guitar with garage band without a buying additional gear"
I record acoustic/electric guitars & vocals to my MacBook Pro (Logic Pro 9) with exteremly good results........ BUT my advice would be, don't spoil a good job for a little expense!
I use a USB audio interface (see link below) that provides facilities for connecting any sort of audio signal and monitor facilities for overdubbing multitracks etc.
There are many such units available, but I would thoroughly recommend the one below.
Good luck...........happy recording!!
http://www.rolandus.com/products/productdetails.php?ProductId=970

What is the best way to connect my guitar to the usb port on my IMac

This is for use with Logic Pro X
what is the best way to connect my guitar to the usb port on my
I-Mac

As has been said really, the less you pay the less quality, and flexibility you'll have on your sound.
For example, you could run on a 'Rocksmith Real Tone Cable' if you just wanted a cheap way of getting your guitar into the computer for some fun. Probably cost you $30 (I live in UK so can't be sure). If you're starting out then this could be considered the best option for dipping your toe in the water without spending too much.
You won't get a really nasty sound out of that if you can process it yourself in Logic afterwards to clean up, but it won't be great either. I imagine it could get quite noisy so you'd need to get heavily gating your guitar sound, if you're playing something clean that's not ideal.
Longterm, you're far better getting a decent audio interface, as you need something to play sound back through, if you have different input sources you usually have to create an aggregrate device on osx to use multple sources at once esp if you're using the built in audio chip on your mac to listen.
All this can add latency and possibly sync issues (i.e. drum tracks not in time with audio etc.), although generally it's not too bad, but it's something worth knowing if you want to do things on the cheap without buying a dedicated interface.
What kind of money did you want to spend? Are you thinking super duper cheap, and then see how it goes and maybe spend more in future if you enjoy it? Personally i would say £100-150 would get your something good to start with, like that Presonus audiobox, there's a lot of options like that available.
My local music shop always push the alesis io2 on new users, gotta say i'm not that overly impressed with it. Line 6 stuff will be good however, but limiting. Although i beleive you get their software for free with it?

What is best way to connect a non-sap sys sending xml idocs to SAP system

Hi Can some one please guide as to what will be the best approach in connecting a NON SAP system to a SAP system.
The non sap system should not be connected to access real time data,it does not support RFC,it can send data in IDOC xml format and i think in teaxt files also.Also I dont think there is any EDI subsystem in place.
There has to be a periodic upload of material data from SAP /stock status/
then there will be incoming data into SAP for sales order/purchase order etc
What would be the best way to connect the two systems,IDOCs with partial EDI looks the best way ,but I am confused as to how will the XML IDOC be converted to normal IDOC and viceversa,how to handle the event triggering mechanism.
If someone has experience in such a scenario ,please help.
There is a option to update the database of the application through SQL also...

Hi,
Check this link.
Web Services from Function Module
it might help u.
Thanks.

Best way to connect iMac to TV

What's the best way to connect my iMac (2011) to my TV? My TV has HDMI inputs and my iMac has Thunderbolt ports, so I know I can connect them with a cable, but they are about 20 feet apart and I think that's too long for a cable run. Does anyone have suggestions?
TIA,
Thad

Get an Thunderbolt to HDMI adapter and a 20 feet long HDMI cable.
There is no problem with the length, but a 25 feet HDMI cable will be around 20$ on eBay.
If you need to really go long distance, then you could get a HDMI over CAT6 extender.
This one will allow 130 feet.
Some models will let you extend up to 1000 feet!

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

What is the best way to connect my new MBP to monitor - DVI, VGA or HDMI

What is the best way to connect my new MBP to a computer monitor? DVI, VGA or HDMI? Thanks

I recommend the Apple MiniDisplay Port to DVI adaptor. I would avoid VGA. MiniDisplay Port to HDMI will work as well (3rd party).
http://www.apple.com/search/?q=dvi%20adaptor&section=mac&geo=us

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

What is the best way to connect 2 monitors to a Mac Pro 13 inch (2013)?

If you want to connect 2 Displays you must do it one with the Minidisplayport and one by HDMI if you have a Retina 13 Inch. i think the old MBP doenst have HDMi Out

What is the best way to connect MBP 13" - (non retina) to HDMI TV input

What is the best way to connect MBP 13" late 2012 - (non retina) to HDMI TV input
...To get Video and Audio? With one cable ...
I'm seeing that the "rocketfish" adapter is not handling the job (from these forums).
I enjoy watching youtube videos, hulu, etc on the big screen through my laptop. The other Windows laptops I'ved had from Sony, HP, Dell, all had HDMI and was easy peasy.
I don't have the patience to buy and return 10 different types of adaters (nor would Best Buy appreciate that)
Thank you!

Look for something like this:
http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADY9 I/ref=sr_1_6?ie=UTF8&qid=1356715728&sr=8-6&keywords=cable+displayport+to+hdmi
Ciao.

What is the best way to connect PumpWorks to Labview? DDE or OPC

What is the best way to connect quizix PumpWorks to labview?
PumpWorks share data using Dynamic Data Exchange (DDE),what is the best way? To use an OPC Server betwen labveiw and pumpworks or DDE?
Solved!
Go to Solution.

Hi.
If the instrumet can communicate with an OPC server I think both methods are fairly equal.
There is a chance that you might have to reinstall LabVIEW without OPC server if you choose DDE, as it is known that it might conflict with the DDE server.
http://zone.ni.com/devzone/cda/tut/p/id/4531
http://zone.ni.com/devzone/cda/tut/p/id/7450
-Tom

What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

what is the best way to connect my ipad to the high speed inernet connection in a hotel room

every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

What is the best way to connect a G4 running 9.2.2 or 10 to an new imac running lion?

It should be possible to network them easily.
Ethernet will be the most straightforward. There is no question that you can plug both Macs into a normal network and they can share files if you turn on File Sharing.
The iMac has a Gigabit Ethernet port, and if the G4 also has Gigabit Ethernet, that will be a very fast connection through a gigabit-capable Ethernet cable or router. Otherwise both can use the slower Ethernet speeds with no problem.
You can also network the two machines via a FireWire 800 or FireWire 400 cable if necessary, and use File Sharing that way too. Finally, you can put one Mac into FireWire Target Disk Mode, which turns it into a hard disk that the other Mac can see, but this is the least flexible since one machine goes out of service, and it's probably no faster than Gigabit Ethernet.

What is the best way to connect a Iphone 6 to a RCA input TV?

Hello, hopefully someone can help me out. What would be the best way to connect a Iphone 6 to a TV that only has a RCA input? Thanks for the help.

don't believe you can RCA is just a connector both composite and component use RCA connectors both are analog and only component support 1080i composite only support 480i or something
apple used to have pin30 -> both composite and component but with airplay mirror those went absolete

What is the best way to connect macbook running sling adapter to the tv

what is the best way to connect macbook running slig adapter content to the tv

Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

Best Way to Connect my REAL electric guitar to my computer? Please Help

Similar Messages

Maybe you are looking for