Best way to connect T430 to Dual Link DVI 2560x1440 Catleap monitors?

I have a T430 and I am looking to get one of those cheap $300 27" Korean 2560x1440 IPS/PLS monitors, but the problem is all of the cheap models only take dual link DVI, while the new T430 notebooks only output via displayport.
I was thinking the best solution for this would be to buy a Lenovo dock that natively outputs dual link DVI (DP to dual link DVI adapters do not allow for refresh rate overclocking). Though on the Lenovo website they don't specify whether their docks output single or dual link, and I am not sure if the signal conversion is done "natively" or via some custom chip in the docks which might prevent refresh rate overclocking. Do you guys know of any T430 docks that are definitely equiped with native dual link DVI? If the docks are only single link DVI or do not allow overclocking then that leaves either buying a $70 adapter and forgoing the overclocking or buying a significantly more expensive monitor with displayport input (and more input lag).
What have your experiences with connecting your T430 to one of these monitors been like? And what do you think would be the best solution at the moment?

The dock dvi is single link dvi-d, if you wish to use dual link dvi-d connection, then you should consider the Apple laptop's active miniDP to Dual Link DVI-D converter.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Is anyone having stuttering problems on the ati 5870 with the mini dislplayport connected monitor when you turn off the display connected to the Dual-link DVI port?

hey i have a ATI 5870 and when ever i turn the monitor connected to the dual_link DVI port the display connected to one of the mini display port shutters with everything on the screen Video, Mouse movement ect, any ideas ?

hey i have a ATI 5870 and when ever i turn the monitor connected to the dual_link DVI port the display connected to one of the mini display port shutters with everything on the screen Video, Mouse movement ect, any ideas ?
Not sure what you are trying to do. I interpret what you are saying is that you have a monitor connected to the DVI port and another to the mini displayport (mDP). Are you physically trying to turn the one connected to the DVI port off (and on) causing the one on the mDP port to "shutter"? If so, take a look at SwitchResX. It will allow you to programmatically turn monitors on or off. Maybe that will cure the problem.
Of course if I am misinterpreting what you are saying ignore this post.

Connect to Dual-Link DVI-D port on monitor using DVI-D to VGA adapter -- getting no signal

I have a T400. I am trying to connect to a dual-link DVI-D port on my LG monitor via the VGA port on my T400 laptop. I bought a DVI-D to VGA adapter, but I am getting no signal.
Do I need some other method or adapter or cable? Monitor works fine for VGA to VGA connection.
Solved!
Go to Solution.

I happened onto this thread while searching for a way to connect my T400 to my wife's 27" iMac. What I learned thus far is that Atlona makes a device (AT-DP400) that will convert dual link DVI to Mini DisplayPort. But Atlona says that one's graphic card must support 2560x1440. The T400 doesn't have a DVI out (nor does my current docking station), but it sounds like one can get a docking station that does. But that won't help if my card won't support 2560x1440. So are you saying that there is no way I will be able to use the 27" iMac as a monitor for the T400?
-Rob

Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

I know this problem has been around for a while, and that there are several other discussion on it, but my goal here is to point out that even in mid-2011, this issue remains.
Here's my configuration:
30" Cinema Display
Dual-link MDP to DVI adapter with 1.03 firmware (purchased August 2011 from an Apple Store)
New-ish MacBook Pro (purchased December 2010) with Mini Displayport
Symptoms:
On dark areas of the screen, DVI noise appears (horizontal flickers of light coming and going at random)
Attempted Fixes:
Unplugging the display and plugging it back in to the computer (failed)
Restarting the computer (failed)
Tightening the connections on the Dual-Link DVI adapter (failed)
Sleeping the display and awaking it (failed)
Some suggest getting a new 27" Cinema Display with native Mini Displayport/Thunderbolt support. I actually have one, but I cannot tolerate the glare on the glossy displays, so I'm "downgrading" to a 30" Cinema Display.
Is there any remaining hope for this issue?

I still cannot understand why you would return everything... Ultimately you want this computer right? Once the bugs on the adapter are fixed are you gonna go back and re-buy it?
Seems like a lot of time spent out of spite and not for good reason. Me, this is the best Mac I've ever owned (and I've owned many. no, really.) and I'm happy to wait for this adapter w/ this machine in stead of going back to my other box.
I observed a similar client of mine w/ an iPhone... after the first week, he didn't like the keyboard and a few other things, so he took it back and went back to using his Blackberry -only to dump the Blackberry again for the iPhone, because he realized that the iPhone still did more things better than the Blackberry.
J.

How do I connect dual link dvi to hdmi so I can use my TV as a monitor?

I have tried to google this for some time and have gotten nothing but conflicting responses. I have a 15" macbook pro with a dual link dvi port. I want to connect it to the hdmi port on my HDTV. What do I need to make that happen?
Is there actually an adapter from dual link dvi to hdmi or will I need multiple devices for this?
thank you,
John

john smearman1 wrote:
Hi there,
Thanks for the response...I think I have a 2007 version. My output is the DVI-I. It looks like maybe the dvi-i male to hdmi female might work? I don't see much in the way of dvi-i, there are more dvi-d around it appears.
This or many others like it will work, then a standard HDMI cable.
http://www.amazon.com/gp/product/B0018QTWH2/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539 851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B000FUVNX8&pf_rd_m=ATVPDKIKX0DE R&pf_rd_r=1CA7V40MEP67P1WJF8EJ

What's the best way to connect the audio out of my Mac to my stereo receiver?

I want to listen to my mp3 collection through my home theatre stero receiver.
I have 2 audio interfaces that I connect to my mac through USB and Firewire: Digi Design Mbox mini and Maudio ProFire 610.
I've tried going from a headphone 1/8'' connector from the headphone out of my mac to rca connected to the aux (or whatever) of my stereo.
I've tried using a 1/4'' adapter on the 1/8'' to go from my mbox mini's headphone output to the rca aux on my stereo.
The problem is I'm hearing distortions that sound like clipping, or static, crunchiness on certain frequencies in a lot of my mp3's that shouldn't be there.
I listen to lots of music, and a lot of it uses distortion, like shoegaze, drone etc but I know what I'm hearing is unnatural.
I even hear these flaws when I listen to headphones through the headphone out of my mbox.
Page 2 on this instruction manual says I should be able to go from the monitor outs to my stereo. The monitor outs are 1/4 inch out so I figured I would need a 1/4 inch to rca cable.
I got this one from monster thinking it should work. No dice.
So my question is, what is the best way to connect my mac to my stereo? I need to avoid these distortions and flaws in the audio i'm hearing or I will go nuts.
Why might I be getting these clipping distoritons?
any advice would be fantastic

It depends on how close the receiver is to the iMac. If it's just a few feet away you need at cable like:
http://www.amazon.com/StarTech-com-THINTOSMIN6-Toslink-Digital-Optical/dp/B00016 W6Y6/ref=sr_1_2?ie=UTF8&qid=1316096392&sr=8-2
However if the receiver is across the room or the house you would be best to enable Air Play, this enables you to wirelessly connect the receiver to the iMac. You will need the above cable and an Airport Express. If you are not familiar with Air Play navigate to:
http://www.apple.com/itunes/airplay/
I have been using it for quite some time and find it great. If you are not familiar with the Airport Express here is the link to it:
http://www.apple.com/airportexpress/
You can even find refurbished ones on Apples website for about $79.

What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?

I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks

OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
Does anyone have an answer to the original question....
"What is the best way to connect to a high end home stereo to retain the best sound?"
For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
For the record, I tend to hear just outside the normal human auditory range...
To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
so-called range we did!
For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
MBP Mac OS X (10.4.9)

What is the best way to connect a firewall cluster to a VPC domain

Hi All
Can anyone help me decide what is the best way to connect a firewall cluster to a VDC running in a pair of N7K's which is a VPC domain?
Can I configure a VLAN interface on each VDC and use HSRP? I was planning on presenting one 10GB cable from each VDC to each firewall. Would this work OK? HSRP traffic will go across the VPC peer link correct?
thanks all

No, but the one caveat is vpc orphan ports. If the vpc link between the nexus switches fails for any reason, all the vpc ports on the vpc secondary switch will be forced down. So it's recommended to connect single port devices to the primary vpc switch so the connections stay up. But if you're ok with that, then I don't see any problems.
You have a few options, one would be to run a separate link between your nexus switches for non-vpc vlans. These vlans would not be allowed over the vpc peer-link, or forwarded out vpc's.
See here page 49 :
http://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_practices_design_guide.pdf

Best way to connect z5400 to X-fi xtreme mu

hello all?i have the z5400 logitech speakers and have connected it to my x-fi via? the yellow/green/black cables. i was wondering if there was a better way to do this. if so could you give a link of the cable i should buy?thanks in advance!

Re: Best way to connect X-Fi elite pro to logitech z5500? ok after a long time i had some progress today finally . so i found out there is no DD or DTS encoder software coming for x-fi elite pro automatially and it has to be purchased from : http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222DDN6Z2H2ADDEZD
after that u get the same output no matter u use optical, coax or analogue connection. so i pretty much now get the same result by using any of these connections.
and finally this package is really usefull , actually way better than the drivers creative provides itself : http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/m-p/527485
i almost retured this soud card toda but after i could fix my problem, i start loving it again lol

What is best way to connect a non-sap sys sending xml idocs to SAP system

Hi Can some one please guide as to what will be the best approach in connecting a NON SAP system to a SAP system.
The non sap system should not be connected to access real time data,it does not support RFC,it can send data in IDOC xml format and i think in teaxt files also.Also I dont think there is any EDI subsystem in place.
There has to be a periodic upload of material data from SAP /stock status/
then there will be incoming data into SAP for sales order/purchase order etc
What would be the best way to connect the two systems,IDOCs with partial EDI looks the best way ,but I am confused as to how will the XML IDOC be converted to normal IDOC and viceversa,how to handle the event triggering mechanism.
If someone has experience in such a scenario ,please help.
There is a option to update the database of the application through SQL also...

Hi,
Check this link.
Web Services from Function Module
it might help u.
Thanks.

Best way to connect rMBP to AVR 7.2

What is the absolute best way to connect a 2012 rMBP to Yamaha RX-V673 7.2 receiver for optimal sound quality for music play ... HDMI, Optical TOSLINK or USB cables?

What are the exact model numbers (should be written on a sticker)?
You will know if they can be stacked as you will see the 2x stack ports on the back of each switch :)
If they can then that is probably the way to go unless you want to keep them as separate switches for some reason.
If you want them separate, I would connect them via a Trunk link at least so you can have the same Vlans on both.
Thanks

Best way to connect X-Fi Fatal1ty to recei

So I have a couple of options here, but since I've got through the trouble of purchasing a 2' "digital coax" cable from monoprice I would like to utilize that cable if possible. How do you connect this soundcard to a receiver using this type of cable? I tried a mono miniplug to RCA converter and I get nothing. I guess my other option would be to buy several stereo miniplug to dual RCA converters and use the multichannel analoge input on my 605 (I guess technically this would be better) but that sounds kind of messy to me, I plan on leave the chord plugged in permenently and left off to the side of my HT system so I can move my PC over there and play some doom/quake 4 and yes... some wow "in high def" with the good surround system.

Re: Best way to connect X-Fi elite pro to logitech z5500? ok after a long time i had some progress today finally . so i found out there is no DD or DTS encoder software coming for x-fi elite pro automatially and it has to be purchased from : http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222DDN6Z2H2ADDEZD
after that u get the same output no matter u use optical, coax or analogue connection. so i pretty much now get the same result by using any of these connections.
and finally this package is really usefull , actually way better than the drivers creative provides itself : http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/m-p/527485
i almost retured this soud card toda but after i could fix my problem, i start loving it again lol

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

Best way to connect iMac to TV

What's the best way to connect my iMac (2011) to my TV? My TV has HDMI inputs and my iMac has Thunderbolt ports, so I know I can connect them with a cable, but they are about 20 feet apart and I think that's too long for a cable run. Does anyone have suggestions?
TIA,
Thad

Get an Thunderbolt to HDMI adapter and a 20 feet long HDMI cable.
There is no problem with the length, but a 25 feet HDMI cable will be around 20$ on eBay.
If you need to really go long distance, then you could get a HDMI over CAT6 extender.
This one will allow 130 feet.
Some models will let you extend up to 1000 feet!

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

Best way to connect T430 to Dual Link DVI 2560x1440 Catleap monitors?

Similar Messages

Maybe you are looking for