Best way to control audio over multiple slides-iMovie or QT Pro?

I have a 30-slide presentation, and due to the horrendous handling of audio files by Keynote I need figure out the least painful way of controlling audio spanning multiple slides.
My end goal is to have a Quicktime file to put on the web, and to burn to a CD or DVD for viewing on individual computers. There is audio spanning 3 slides (a Garageband mix with voiceover narration built in,)and different audio for background for different groups of slides.
Least painful method to attempt this and get ACCURATE TIMING for the end product?

Make a series of Keynote presentations, one for each complete audio track. Export each as a QuickTime DV (digital video) clip. Launch iMovie and import the clips into a single iMovie project; tweak each clip's audio, as necessary. Finally, export the assembled iMovie to your intended QuickTime format.

Similar Messages

Best way to control and run multiple (up to 20) processes independantly in LV

Hi all,
I'm trying to build an application in LV to independantly control and run multiple (up to 20) processes, ie, it should be able to start and stop any of the processes at any given time. What would the best way to code for this? Off the top of my head would be to use a unique notifier to control each of the process, but I'm thinking that the code upkeep may be a handful with this number of notifiers being defined. Are there better ways of doing this?
Appreciate any help and insight on this.Thanks a bunch in advance!
Solved!
Go to Solution.

I forgot some more important questions:
How large is your development group?
How much "discipline" do you want to program into the Process Commands framework? For instance, is it OK for any VI to command a process into a certain state, or should your program generate a broken wire or run-time error if a command is sent from a non-authorized source?
Where do your needs fall on this spectrum: simplicity that gets the job done and the product out the door and will probably not need much maintenance or upgrading, or flexible framework that will likely undergo multiple upgrades or fall into the hands of multiple developers?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Audio over multiple slides in Captivate 5

I am new to using Captivate 5 and i'm trying to record audio in Captivate that will play while 3 slides advance on their own.
I read something on a past thread that talked about clicking a "slide divider" - I can't find the "slide divider" and about a "distribution window" opening after I record the audio - that never appears.
Can anyone help me with this? It seems like it should be easy to find.
Thanks
Emily

Hi Emily,
You can record audio to 3 slides in different ways.
Option1 :
You can record audio individually on all the three slides by invoking the Slide audio dialog for every slide.
1. On every slide you wish to record audio invoke the slide audio dialog ( from Audio >> Record to >> Slide ) and record for the single slide. Saving the recorded audio will add it to the slide you recorded.
2. You can follow step 1 for all the three slides you wish to record.
Option 2:
You can record audio to all the three slides continuously in one go. You can do this in the SLIDES audio dialog
For ex if you want to record audio for slides 1,2 and 3, then select slide 1 and invoke the slides audio dialog from Audio >> Record to >> Slides
You get a "Record from Slide" dialog. Enter the Slide numbers for which you wish to record audio and click ok.
This will open the slides audio dialog.
Slides audio dialog shows up the slides selected in the "Record from slide" dialog. Enable "Continuous play" and "SWF Preview" and Click on the recording button. This will record audio over the three slides as you narrate. Audio will be added to all the three slides. You can see the Movie (SWF) preview or the Slide number mentioned in the top right of the preview pane to know the slide number you are recording to.
If some portions of the audio spills over the next slide then you can arrange the markers in the EDIT tab. Here you can play the audio and pause at the point where you want your next slide to start and click on the button highlighted by Lilybiri. Its called the "Start Next slide here" button.
After all the recording is done click on SAVE to add audio to all the three slides.
Try out these and let me know if it works.
-Ashwin Bharghav B

CP5 Freezing when editing video over multiple slides

Captivate continuously freezes when I'm working with a video that I've spread over multiple slides.
This is a Windows 7 computer. I've cleared my cache incase that had something to do with that.
Any help would be apreciated.
Susan

Which version?
Some ideas: background music for the file, to stop on slides 1-2 and 21-23.
VO as slide auido on slides where wanted.
For slide 2: object audio which can play parallel with the VO (see http://blog.lilybiri.com/audio-objects-control-them)
For slide 21-23: object audio with object displayed for the rest of the project, and hidden on entering slide 24
Lilybiri

(workflow question) - What is the best way to handle audio in a large Premiere project?

Hey all,
This might probably be suitable for any version of Premiere, but just in case, I use CS4 (Master Collection)
I am wrestling in my brain about the best way to handle audio in my project to cut down on the time I am working on it.
This project I just finished was a 10 minute video for a customer shot on miniDV (HVX-200) cut down from 3 hours of tape.
I edited my whole project down to what looked good, and then I decided I needed to clean up all the Audio using Soundbooth, So I had to go in clip by clip, using the Edit in SoundBooth --> Render and Replace method on every clip. I couldn't find a way to batch edit any audio in Soundbooth.
For every clip, I performed similar actions---
1) both tracks of audio were recorded with 2 different microphones (2 mono tracks), so I needed only audio from 1 track - I used SB to cut and paste the good track over the other track.
2) amplified the audio
3) cleaned up the background noise with the noise filter
I am sure there has to be a better workflow option than what I just did (going clip by clip), Can someone give me some advice on how best to handle audio in a situation like this?
Should I have just rendered out new audio for the whole tape I was using, and then edit from that?
Should I have rendered out the audio after I edited the clips into one long track and performed the actions I needed on it? or something entirely different? It was a very slow, tedious process.
Thanks,
Aza

Hi, Aza.
Given that my background is audio and I'm just coming into the brave new world of visual bits and bytes, I would second Hunt's recommendation regarding exporting the entire video's audio as one wav file, working on it, and then reimporting. I do this as one of the last stages, when I know I have the editing done, with an ear towards consistency from beginning to end.
One of the benefits of this approach is that you can manage all audio in the same context. For example, if you want to normalize, compress or limit your audio, doing it a clip at a time will make it difficult for you to match levels consistently or find a compression setting that works smoothly across the board. It's likely that there will instead be subtle or obvious differences between each clip you worked on.
When all your audio is in one file you can, for instance, look at the entire wave form, see that limiting to -6 db would trim off most of the unnecessary peaks, triim it down, and then normalize it all. You may still have to do some tweaking here and there, but it gets you much farther down the road, much more easily.Same goes for reverb, EQ or other effects where you want the same feel throughout the entire video.
Hope this helps,
Chris

Best way to control selected plug in parameters?

Hi all,
I've got an M-Audio ProjectMix I/O which Logic sees as a Mackie Control. I'm looking for the best way to control plug in parameters. I know I can navigate through the plug in parameter pages on my PMix, but what I want is a screenset that has each needed parameter assigned to a fader or something.
Can it be done using folders? Any ideas?
Thanks a bunch!

I think I figured it out.
Use a folder, make a track for each parameter I want to control (or click that arrow to make another instance), then on my PMix I have to click the track view button a few times to view my plugins.
Cheers.

Best way to rearrange audio slices?

What's the best way to move audio slices around? Is there a simple way to do that using flex time that I haven't discovered yet? I usually do alot of snare replacing on live drums, taking one hit where the drummer hit hard, and pasting it in to replace weaker hits. There doesn't seem to be a way to grab a flex slice with the mouse and move it around ...
I've used the new drum replacement feature on L9 and it works well, but was wondering if flex audio offers a better, more elegant way to move slices around other that just cutting and pasting them the "old fashioned" way.
Thanks

Greetings,
You could always try to convert your loop into an EXS24 instrument and move the midi notes around. I can totally see what you mean though. It would be nice to simply re-order or replace the slices right on the arrange window. As for converting to EXS, the transients don't quite read as nice as I would like them to, so converting might still be a little unfriendly.
I still do it the "older" fashion way, by opening ReCycle 2.1 (its 2010 and still Rosetta) slicing my loop and importing into Logic. Only there can you rearrange at will within the imported folder that's created once you imported the REX. On the upside, you get complete control of your transients along with ReCycle's stretch algorithm.
I second the ability to rearrange flex (slice) transients directly on the arrange window.
Hey, it could happen. Crazier things have.
Cheers
LGK

Best way to import data to multiple tables in oracle d.b from sql server

HI All am newbie to Oracle,
What is the Best way to import data to multiple tables in Oracle Data base from sql server?
1)linked server?
2)ssis ?
If possible share me the query to done this task using Linked server?
Regards,
KoteRavindra.

check:
http://www.mssqltips.com/sqlservertip/2011/export-sql-server-data-to-oracle-using-ssis/
      koteravindra
Handle:      koteravindra
Status Level:      Newbie
Registered:      Jan 9, 2013
Total Posts:      4
Total Questions:      3 (3 unresolved)
why so many unresolved questions? Remember to close your threads marking them as answered.

Best way to adjust audio on Final Cut Pro 5 Quicktime Export?? Render files

What is the best way to adjust audio on Final Cut Pro, Quicktime self-contained export? Please note all render files and orginals master clip are gone. So adjustments will need somehow be made to the exported Quicktime file.
As always thanks in advance for your reading and replying to my post,
Sebastian

Export the aiff file out of QT Pro, and import it into SoundTrack. Sweeten there

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to play audio in 24bit 48Khz WAV format?

Hi guys, whats the best way to play audio in 24bit 48Khz WAV format through FF? The format cannot be changed and the files are local. I was hoping the HTML5 audio tag would play it but it seems to be limited to 16bit. Is that correct? Whats the best way to get sound playing quickly?

Which media player plugins do you have?
Plugins like RealPlayer and Windows Media Player and QuickTime should be able to play such files if the player can play them if you open the files directly in the player.
Does it work if you open the file via the location bar?
I only have 16 bit 44kHz files, so can't test, but opening such a file via the location bar works.

Best Way to copy audio books

Hi
What is the best way to copy Audio Books. I just bought all the Harry potter on CD's. I have a 30g 5th gen IPOD had it for 2 month. Upgraded ipod to 1.2 and iTunes 7.0.1.
Everything is running fine.
Thanks,
Windows XP Pro

Hello again,
I went and checked PDF document properties. The document was created by an application called (3B2 Total Publishing). It's the application that the printing press used to creat the PDF file. Unfortunately I don't have the source document and the printing press claim they don't have any source files but used in-house applicatin to create the PDF book.
I checked fonts used in the PDF file and I found 17 fonts named T1 to T17 and all (Type 3) fonts. I'm seasoned IT engineer but no experience in publishing. So, no idea whether or not this information is usefull to find a way to publish these books in epub.
Cheers,
Abdul

What is the best way to control a mac mini with iphone 4s , prefer blue tooth

Hi
what is the best way to control a mac mini with iphone 4s , prefer blue tooth, or I can use the syncing cable as well. but no wifi.
Basically to lanch an app and load a preset for that app.
Thank you

As V.K. noted, check out NetRestore's documentation http://www.bombich.com/software/docs/netrestore/English/index.html or visit the fourms at http://forums.bombich.com/

What is the best way to transfer iTunes from iBook G4 to new MacBook Pro?

What is the best way to transfer iTunes from iBook G4 to new MacBook Pro?

Copy the entire itunes folder.

What's the best way to master an MPEG 2 file for DVD Studio Pro.

In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
Peter
PS - I'm using FCP 5

Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
http://www3.telus.net/bonsai/Step-by-Step.html

Best way to control audio over multiple slides-iMovie or QT Pro?

Similar Messages

Maybe you are looking for