Best way to copy from an External HD to TimeCapsule's internal HD?

Hi, I have a USB 2.0 connectable external drive (powered) that's full of files I'd like to copy over to my TimeCapsule's internal drive. If I connect the USB to my Mac and copy the files by selecting them all and dragging them to the mounted share on the TC it takes forever. Will it make a difference if I connect the external drive directly to the TC and mount both shares on my Mac's desktop and copy from one share to the other?
I was wondering if the data transfer will then be directly from drive to drive or still comes over the WiFi network to the Mac (as cache for the process), since the Mac is running the copy command.
Can someone with insight in these matters clarify ? Thanks!

sjogro wrote:
Hi, I have a USB 2.0 connectable external drive (powered) that's full of files I'd like to copy over to my TimeCapsule's internal drive. If I connect the USB to my Mac and copy the files by selecting them all and dragging them to the mounted share on the TC it takes forever. Will it make a difference if I connect the external drive directly to the TC and mount both shares on my Mac's desktop and copy from one share to the other?
No, that will take even longer. The data must go from the USB drive, through the TC, to your Mac, then back to the TC.
The only way you can transfer directly between the TC and an attached USB drive is to "archive" the TC's entire disk to the USB. The TC doesn't have the software to do anything else directly.
If you can connect your Mac to the TC via Ethernet, that will be 2-3 times faster than even a good WIFI connection.

Similar Messages

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network.

What is the best way to copy a DVD i made from iMovie? It was HD720 and I don't want to lose any quality in the copies.

What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.

You will need to save it as a video to the camera roll.
Import it into windows as you would a photo.
Then purchase DVD authoring software, and create a DVD.

I have 21,000 photos stored in iphoto. I have a WD 1.5TB backup external hard drive. What is the best way to erase about half of my photos on my internal hard drive?

I have 21,000 photos stored in iphoto. I have a WD 1.5TB backup external hard drive. What is the best way to erase about half of my photos on my internal hard drive?

Here's one way to do what you want:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

What is the best way to set up an external drive for video storage

What is the best way to set up an external drive for video storage?

Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

What is the best way to copy data....

Hello friends,
What could you think is the best way to copy this data ? :
- I have two identical databases (Oracle 9i)
- I want to migrate the data of 90 tables (all tables begin with the same string, i.e. 'TAB') from Database1 to database2.
- There are integrity constraints, referentials, etc.
I'd like to generate a script to automate/accelerate the process.
So, I'm thinking on the following:
- Disable all the constraints in Database2.
- Connect to Database 1 and generate a script with the 'inserts' using TOAD (or another similar application)
- In a Database 2 session, execute the script...
Of course if I use TOAD I can't generate an unique script to do this process in one step so...
Any better idea? (Using export/import, ... or some script you have...)
Thanks.
Jose.

Use exp and imp. It works... seriously! And you don't need to drop the user/schema. But don't take my word, run an example...
On Database 1
First let's create a couple of tables with referential integrity to each other to make sure exp/imp can handle it...
SQL> create table t1 (t1_id number constraint pk_t1 primary key, t2_id number);
Table created.
SQL> create table t2 (t2_id number constraint pk_t2 primary key, t1_id number);
Table created.
SQL> alter table t1 add constraint fk_t1_t2 foreign key (t2_id) references t2 (t2_id);
Table altered.
SQL> alter table t2 add constraint fk_t2_t1 foreign key (t1_id) references t1 (t1_id);
Table altered.
SQL> insert into t1 (t1_id, t2_id) values (1, null);
1 row created.
SQL> insert into t2 (t2_id, t1_id) values (2, 1);
1 row created.
SQL> update t1 set t2_id = 2 where t2_id is null;
1 row updated.
SQL> commit;
Commit complete.
SQL> select * from t1;
     T1_ID      T2_ID
         1          2
SQL> select * from t2;
     T2_ID      T1_ID
         2          1
SQL> select table_name, constraint_name, constraint_type, r_constraint_name from user_constraints
2 where table_name in ('T1','T2');
TABLE_NAME                     CONSTRAINT_NAME                C R_CONSTRAINT_NAME
T1                             PK_T1                          P
T1                             FK_T1_T2                       R PK_T2
T2                             PK_T2                          P
T2                             FK_T2_T1                       R PK_T1
SQL>
Now let's export those tables. You can build a parfile manually or even spool it from a sql script with the names of all tables you need to export...
$ cat parfile.txt
tables=(\
t1,\
t2
$ exp rc/pwd parfile=parfile.txt file=db1.dmp log=db1.log
Export: Release 10.1.0.3.0 - Production on Mon Jan 9 20:49:17 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in UTF8 character set and UTF8 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table                             T1          1 rows exported
. . exporting table                             T2          1 rows exported
Export terminated successfully without warnings.
On Database 2
Copy your .dmp file to Database 2
Import
$ imp rc/pwd full=y file=db1.dmp log=db1_imp.log
Import: Release 10.1.0.3.0 - Production on Mon Jan 9 20:51:15 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
import done in UTF8 character set and UTF8 NCHAR character set
. importing RC's objects into RC
. . importing table                           "T1"          1 rows imported
. . importing table                           "T2"          1 rows imported
About to enable constraints...
Import terminated successfully without warnings.
All data is there...
SQL> select * from t1;
     T1_ID      T2_ID
         1          2
SQL> select * from t2;
     T2_ID      T1_ID
         2          1 All constraints are there...
SQL> select table_name, constraint_name, constraint_type, r_constraint_name from user_constraints
2 where table_name in ('T1','T2');
TABLE_NAME                     CONSTRAINT_NAME                C R_CONSTRAINT_NAME
T1                             PK_T1                          P
T1                             FK_T1_T2                       R PK_T2
T2                             PK_T2                          P
T2                             FK_T2_T1                       R PK_T1It does work!

What is the best way to copy 700 local folders full of email to a new computer?

I am moving my wife from and old computer (Thunderbird, Win XP) to a new one (Thunderbird Win 7). She has about 700 local folders with thousands of email messages in them. What is the best way to copy them to the new computer?

The easiest way is just copy the whole profile.
Help menu > troubleshooting information
Close Thunderbird
In windows explorer select all and copy.
paste everything onto a thumb or other read/write portable media (not CD or DVD)
on the new Machine repeat the troubleshooting and close steps to get the current profile folder
This time paste everything from the portable media into the profile replacing what is there
Open Thunderbird, your done mail contacts add-ons everything

Best way to copy range of paragraphs

I'm getting all the changebars in the files of a book, and copying them out into a separate, single change document. Once I find the Pgf with the changebar, what would be the best way to copy the info out to the change doc? I want to copy the entire section that contains the changebar.
I figured I would move backwards and find the most recent section heading and set the beginning of a TextRange there at the beginning of that Pgf. Then I move forward and find the following heading pagagraph, and move back one pgf from that and set that as the end of the range.
At that point should I use copy and paste into the new document?
Thanks, Mark

Hi Mark,
Glad you are making progress. About the Pgfs in tables: yes, they are in a world of their own. Each table is a more or less closed object anchored to a paragraph in the document. You can step through all Pgfs in a document (including the ones in your text flows as well as the ones in table cells) using one single linked list, but that list does not care about the order in which the paragraphs appear in your document, and also includes paragraphs on your master and reference pages. This is not what you want to have.
You mentioned you wanted to copy not just the paragraph with changebars but the section that contains at least one paragraph with changebars. One strategy is finding a paragraph with changebars and then tracking back to the previous heading and forward to the next heading, so that you can determine which section to copy to your changes document. With the requirement of checking paragraphs in tables added into the equation, this becomes a complex matter. Even if you know that a paragraph in a table cell has a changebar set, you should track back to the table anchor, then to the paragraph in which the anchor is located, and then back to the section that you need to copy. And if the section also contains a paragraph with changebars outside a table, you do not want to copy it again.
This might require a completely different approach to the problem. Build an array with paragraph identifiers of all headings in your document, and create an array of booleans all set to false that has the same number of entries. Then find all paragraphs with changebars and, for each found paragraph, walk back to the nearest heading, find the heading identifier in the headings array and set the corresponding entry in the boolean array to true. Then do the same thing with paragraphs with changebars in tables. In this case, you track the paragraph in the table back to its table anchor, then to the paragraph containing the table anchor and from there walk back to the nearest heading.
In the end you will have an array of heading paragraph identifiers and a matching array of booleans telling you which sections to copy to the changes document. Doing the copying is dead easy, as you already have the start and end paragraph identifier for each section. Just create a TextLoc pointing at the first heading Pgf with offset 0 and a TextLoc pointing at the next heading Pgf with offset 0 and copy this range.
I hope this makes sense to you. If things get too complicated, throw me an email (you will find my mail address in my profile) with a sample file and I will have a look at it. If I think it will take me more than a couple of hours to write, I will make you a decent offer.
Kind regards
Jang

Best Way to go from 2.1.1 to 2.1

What is the best way to go from 2.1.1 to 2.1? I have a legit copy of 2.0 and no application backup copy available to me.
Thx in advance

remove the 2.1.1 app ... prob best to remove the app support folders for aperture too ...
install 2.0 from disk and go to :
http://www.apple.com/downloads/macosx/apple/application_updates/aperture21update .html
for the 2.1 update ...
prime example of why one needs to have a good solid plan prior to performing ANY upgrade/update on one's systems ... but i don't need to tell you that now do i ...

What's the best way to store my info externally

I have recently bought my first Macbook Pro 13" with 2.4 Ghz. I am currently using it for my own business and do tend to get a lot of files together. I went to look at "About this Mac" and have already got 369 Gb used up in storage... I have no idea how I have done that as I have hardly downloaded any apps on this computer besides the ones that were on here. I did download Vware Fusion 4 as I have a reservation system which I used to run on my pc and need to have this on here too so perhaps that software takes a lot of space.
Could anyone advise on which is the best way to store my info externally, will any external harddrive do, or do you need a special one for Apple or Macbook pro. I am just asking as I have no idea and prefer to buy the right one straight away.
Any help would be much appreciated !
Thanks, Sara***

Sara,
The most reliable method is to use an external hard drive. Some are better than others, but most will work.
For the least amount of setup pain, I prefer to deal with the Mac specialists at OWC, http://www.macsales.com as they stand behind their products with great warranty and support. I have one of their Mercury Elite Pro 2 TB drives that has multiple interface capability so you can get a fast interface for data transfer.
Take a look at what they offer and see what fits your needs. If you have more questions about doing thin, just ask on here.
Ralph

-36 I/O Error copying from one external drive to another? Ugh...help?!?

Hardware:
Apple Powermac Dual 2.5 GHz G5
512 MB RAM
External Drive 1: LaCie 250 GB (Firewire 800) (contains 150 GB data) (formatted MacOS Extended)
External Drive 2: LaCie 400 GB (Firewire 800) (contains NO DATA) (formatted MacOS Extended Journaled)
Software:
Mac OS 10.4.3 (Tiger)
I've sucessfully run the firmware updater (http://www.lacie.com/support/drivers) "LaCie Update Tool v1.3.3" for both LaCie drives to the latest version - 107.
Background:
Before I updated to the latest firmware and before I changed Drive 2 to journaled, I had problems copying files from both drives to the other. I get this error: "The Finder cannot complete the operation because some data in "filename here.ext" could not be read or written. (Error code -36)."
I did some research (http://www.appleerrorcodes.com/) to discover that Error -36 is an I/O error.
My goal is to reformat Drive 1 (250GB) to journaled. After some reading, I have decided to do that for both of my external drives.
Question:
I'm at the point now where I need to copy the data from Drive 1 to Drive 2 and this error is still occuring. I need to 1) understand why it's happening and 2) find a solution so I can copy this data from Drive 1 to Drive 2.
Future Question:
Once the data is copied, I will then reformat to journaled. I'm then going to decide between scheduled backups or setting up a RAID, but I'll post this issue as a separate question. I first need to understand and fix this copy I/O stuff.
THANKS!
Dual 2.5 GHz G5 Mac OS X (10.4.3)

Using the Disk Utility with the Mac OS, I just realized that I can't verify or repair disk permissions on either of these external LaCie drives. I can on my startup internal disk, but not the external ones. Any idea why?
I replaced the FW800 cables, but I still cannot copy from one external to the other. The connections are like this:
Drive 1 (250 GB) is connected to the back of my G5 via FW800.
Drive 2 (400GB) is connected to Drive 1 via FW800 cable.
I'm in need of some help!
Robert
Dual 2.5 GHz G5 Mac OS X (10.4.3)

How do i copy from an external hard drive to iMac?

When copying from an external hard drive, when the box 'select your disc' comes up - I am unable to continue.

I suspect the external HD is formatted in NTFS, by default a Mac can write to one but it cannot be written to from one. How you overcome this is to download and install the NTFS-3G Download.
Roger

What is the best way to print from an iPad?

I have the Printer Pro app, and it seems to do a good job locating my wireless printer, but it gets complicated to print webpages or pages documents. What is the best way to print from an iPad 2?

If you have a compatible printer, use AirPrint http://www.apple.com/ipad/features/airprint.html and http://support.apple.com/kb/HT4356
If not, you would need to purchase software, such as:
http://itunes.apple.com/us/app/printcentral-for-ipad/id366020849?mt=8
http://www.ecamm.com/mac/printopia/
http://www.collobos.com/

Best way to read from a file

What would be the best way to read from a file. Which classes do I need to use?
I have to write a program, which reads data from a comma separated flat file, parse it and after inserting some busineess logic insert into a databse .
I will have to read the data line by line.
Any help????

I would use:
     public void readData()
          try
               data = new String[this.countRows("comp.txt")][];
               BufferedReader br = new BufferedReader(new FileReader("comp.txt"));
               for(int x = 0; x < data.length; x++)
                    StringTokenizer temp = new StringTokenizer(br.readLine(), "?");
                    data[x] = new String[temp.countTokens()];
                    for(int y = 0; y < data[x].length; y++)
                         data[x][y] = temp.nextToken();
          catch(Exception e)
               System.out.println(e.toString());
     private int countRows(String f)
          int t = 0;
          try
               BufferedReader brCountRows = new BufferedReader(new FileReader(f));
               while(brCountRows.readLine() != null)
                    t++;
          catch(Exception e)
               System.out.println(e.toString());
               return t;
          return t;
     }It works deliciously!

Best way to copy from an External HD to TimeCapsule's internal HD?

Similar Messages

Maybe you are looking for