Best way to create a new property

Scenario:
I have 4 applications and each of them need a Consolidatio property. A Consolidation property has been created in DRM with Add, Sub,Mult, Div etc. as list values.
Now I want to create 4 new properties for Apps A, B, C and D.
I want to create:
Consol_A, Consol_B and so on. Now, when I create a new property, can I just make it point to the originial Consolidation Property by using Property type as PROPERTY?
Property Type property basically means that the new property POINTS to a property right? Can I just use this ?
Otherwise, it will be annoying and a tedious process to create all the properties from scratch. Thanks.
-- Adi

Sorry but I don't know your level of knowledge with DRM. A lot of users confuse terms and call each hierarchy an application. Just to be clear:
1. Applications for me are: DRM, HFM, Essbase, etc
2. DRM is the application
3. A DRM Application can contain many VERSIONS.
4. Each VERSION contains one or more HIERARCHIES. HIERARCHIES in each version are unique and self contained but properties span versions.
5. Each HIERARCHY contains one or more NODES.
6. A NODE can exist in multiple HIERARCHIES but exists with a full set of properties once in the VERSION.
The reason for making the properties LOCAL and RW Derived are as follows:
1. Because a NODE can exist in multiple HIERARCHIES, the value can be different. Let's say you have a HIERACHY named ACCOUNTS and an alternate HIERACHY that is a rollup for HFM. A NODE named ASSETS can exist in both HIERACHIES. When it resides in the ACCOUNTS it's consolidation is +. When it resides in HFM its consolidation is _. By making it local/RW Derived, when you drag it from ACCOUNTS and insert it into HFM ALTS, it will come with the default value of +. You can then go into HFM ALTS and set it manually to - allowing the value to be set based on what HIERARCHY you are looking at.
Hope this clarifies what I was saying. My name is Al Moreno (www.sinecon-llc.com) and my company installs DRM for companies. We have done over 50 installations all over the world.
Al ([email protected])

Similar Messages

  • Need help knowing best way to create record

    What is the best way to create a new record... I have a form pulling info from about 20 tables. When the user wants to create a new record, I want a new form to open and allow them to select the values based on the foreign key fields so it makes more sense than just random numbers.
    The problem I'm having is knowing when and how to insert. Should the "new record" form be it's own database block that inserts from within it. (but then when they go back to the original form they must requery to see the new value.) Or what about copying each field back to the original form. I'm new to forms and would appreciate any insight and tips.

    would a wire like this help me?
    I doubt it. You want FireWire.
    Take look at the Canopus ADVC300. It comes with a nice Macintosh application that works flawlessly with iMovie 06.
    http://www.canopus.com/products/ADVC300/index.php
    Yes, it does cost more but it works.

  • KEA0 what is the best way to create new Operating concern

    Hello :
    Please advise
    1. what is best way to create new OP concern
        copy from template or create data structure from scratch?
    2. I try to copy from OP concern = IDEA but when click change DATA STRUTURE -I see only CE1xxx but I not see CE2xxxx, CE3xxxx, CE4xxxx ...
       pls advise - how to? can I change data structure on CE2, CE3....
    Thx in advance.
    Manthana

    If your data structure will be the same then do a copy. if the data structures are different then create from scratch ( or modify after copy).  Copy saves time so you don't have to start from scratch.

  • What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

    I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
    I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
    single month and year.
    I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
    how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
    practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
    able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
    For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
    resultset on two fields:
    Start Date - The date the patient was assigned to the practice. This field is never null or blank.
    End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
    leaves the practice, the date the patient left is populated in this field.
    Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
    start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
    AND
    end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
    selected)
    Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
    how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
    John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
    Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
    Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
    Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
    August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
    Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
    this:
    Patient Name              
    Months Assigned
    John Doe
    June 2012
    John Doe                     
    July012
    John Doe                     
    Aug 2012
    John Doe                     
    Sept 2012
    John Doe
    Oct 2012
    Sally Doe                     
    Aug 2012
    Sally Doe                     
    Sept 2012
    Sally Doe
    Oct 2012
    Sally Doe                     
    Nov 2012
    Sally Doe
    Dec 2012
    Jimmy Doe                  
    July 2012
    Jimmy Doe
    Aug 2012
    Jimmy Doe
    Sept 2012
    From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
    June 2012 - 1
    July 2012 – 2
    Aug 2012 - 3
    Sept 2012 - 3
    Oct 2012 - 2
    Nov 2012 - 1
    Dec 2012 - 1
    The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
    be the y axis).
    Does this sound like the best approach?
    If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
    I do not have permissions to create SPs or Functions within the database but I can create temp tables.
    I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
    Any advice or help is greatly appreciated.

    Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
    Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want. 
    Doing a cross  join between my original resultset that had two dates:
    08/27/2010
    10/24/2011
    and a calendar table that has 24 rows (each month for a two year period)
    my new resultset looks like this:
    I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
    You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
    the Months Assigned value must be greater than or equal to the date assigned value.
    Any advice would be appreciated.

  • What is the best way to create a database schema from XML

    What is the best way to create a database schema from XML?
    i have  a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
    There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
    Taking my C# further

    Hi Saythj,
    When mentioning "a database schema from XML", do you mean the
    XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
    Create an XML Schema Collection basing on your complex XML, you can find
    many generating tools online to do that.
    Create a Table with the above created schema typed XML column as below.
    CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
    Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • What is the best way to create Aperture book from Pages '09 document?

    What is the best way to create Aperture book from Pages '09 document?

    There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
    The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and  create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
    But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

  • Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

    dw, css, and a template, what is the best way to create a 20
    page website with different header content on each page? i am
    trying to insert a specific image and background color for each
    header on every page. what is the easiest or best way to do this?
    thanks, bryan

    "mediastream13" <[email protected]> wrote in
    message
    news:f47bes$9om$[email protected]..
    > ok, murray, here is the site.
    http://www.helphotline.org
    > in I.E. 6 i can't see the background color behind the
    header images,
    I'm seeing a hot pink background (which is my browser default
    - so that I do
    remember to declare a background color). You need to add:
    body { background-color: white;} to your stylesheet, or into
    the imbedded
    styles on your page.
    In Firefox, the very top black section, #headertop is hidden
    behind the
    header image.
    > background of the date/time isn't stretching the full
    length of the
    > screen, and
    > the margins aren't working in the main content area. how
    can i put a
    > background
    > color behind the header images?
    I can see the header image stretching right across the page..
    so not sure
    what color is missing there.
    > is there anyway to download i.e. six on my computer if i
    already have
    > i.e.7? i
    > just want to be able to preview the site before i upload
    the changes. it
    > seems
    > everything works in i.e. 7.
    Yes, I used this and it works really well.
    http://tredosoft.com/Multiple_IE
    Nadia
    Adobe® Community Expert : Dreamweaver
    CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    ~ Customisation Service Available ~
    http://www.csstemplates.com.au

  • What is the best way to create a Flash site

    Hello Everyone,
    I am realtively new to flash. I created the splash page of
    our site in flash but 1st off it takes to long to load as it is.
    But I would like to create the entire site in Flash. What is the
    best way to create a Flash site, and are there tutorials out there
    or any really good books, resources, or online classes to learn
    Flash well. I understand the basic of flash and have created
    banners, and other flash materials.
    Can anyone help?

    For me, as a noob, It's all about creative problem solving.
    For lots of stuff, there's no right or wrong solution, but you have
    to figure things out on your own. I, too, have built sites from the
    ground up, and then rebuilt them even better. It's the only way to
    really learn it well. Books, online forums, help docs all sort of
    help, but it all comes down to how innovative you can be with
    integrating them all into a site that is completely yours.
    This might save you loads of headaches: avoid using scenes,
    unless you are doing only animation. Keep each of your 'pages' on
    their own keyframe, and use 'gotoAndStop' to navigate through them.
    This is perhaps the easiest way to create a website quickly.
    P

  • Whats the best way to create USER variable in BI Apps?

    I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
    We have USER variable already defined in the BI Apps rpd.
    In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
    Whats the best way to create USER variable for EBS Security Context init block?
    1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
    And i was told that it should not be done.
    Let me know how can it be done.
    Thanks
    Ashish

    Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
    Thanks
    Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

  • Best way to create SVG file from drawing application?

    I am developing a drawing application that allow the users to draw and edit static two dimensional images such as Rectangles, Ellipses and Text. I have a superclass SVGShape that contains all the common features of a shape such as x1, x2, color etc. I then have SVGRectangle as a subclass of SVGShape.
    I want to know what would be the best way to create an SVG file from this? An idea I have at the minute is to have an abstract method getSVG() in the SVGShape class, and then implement the method in the subclasses. I will then create a new class called SVGManager which iterates through the list of shapes (Btw I'm using MVC, my shapes are stored in a Collection) and uses the getSVG() mehtod in each shape to build up a SVG file.
    What do you think of this? Any better ideas?
    Thanks guys

    I used a visitor for this in a similar project, so that when the svg library is used in a applet or browser and the writing functionality isn't required, it may be omitted from the bundle.
    Pete

  • Best way to create a conact list from the user profile properties

    We have a customer looking for a phone book utility, starting with a table showing main user information and with some search options. We would like o base it on the user profile properties and not to create an indipendent studion record browser porlet.
    What is best way to create a conact list from the user profile properties ?

    I did something like this using search.  It can get messy, so you need to take care with it.
    * Identify the properties you want to make accessible to search (ex: name, etc.)
            - add them to the user property map
            - flag them as searchable
    * I broke down and used the native server API.  I'd still suggest this approach.
    * Write some simple code to do vcard export if you like
    (my code is all in vb.net)
    I really believe this is the &#034;right&#034; approach, but honestly, this was a bit painful and has been
    messy for us given some other business issues.  (to my chagrin we have users with 2-letter last
    names...)
    I have code you're welcome to poke at, but it's more or less slapped together and has various
    different search methods commented out so you can see how I tinkered w/ the remote vs. server
    API.
    If you'd like it mail me at [email protected] and I'll send you a zipped copy w/ a
    readme.  I hope it may be useful to you as both a starting reference.

  • Best way to create slide shows in PE4 and PSE 6

    What's the best way to create a fancy slide show in PE 4 and PSE 6? I need to create a slide show of about 600 pictures. I'm on Windows XP with 3gb RAM. I've done this a few years ago in earlier versions of PE and PSE. Before i plunge into this again i wanted to get some overall guidance for what to do or not do.
    My ultimate goal is to create a slide show that:
    1. uses pan and zoom on every photo
    2. transitions between every photo
    3. has an audio track
    4. has some nice special effects -- words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out.
    My view is that it's easy to accomplish #1-3 in PSE 6; it's quite simple to create a slide show, add pan and zoom, and transitions. However, #4 is not doable because adding text and graphics can only be done on a slide at a time and only when the slide start/stops (i.e., you can't have text appear 2 secs after the slide has started displaying and stay on screen while the next slide appears). Need PE 4 to do that.
    What i'm wondering is:
    -- is it best to create the basic slide show in PSE6 and then export to PE 4 to do the final fancy stuff, or is it best to just create the show in PE4? Seems that doing the pans, zooms, and transitions are easiest in PSE 6.

    eric,
    I am going to offer some reasons NOT to start this slide show in Photoshop Elements. This is despite the fact that I have used the workflow of starting in Photoshop Elements and used the Send Slideshow to Premiere Elements in PSE5 - PE 3 and PSE7 - PE7.
    1- Timing differences between the PSE and PE slide show construction and processing
    There are many differences in timing between the two products. Transitions can start/end slightly offset from their timing in PSE once they arrive and are processed in PE. Same for pan and zoom. Does this matter? Well the more precise your timing, the more potential for a show stopper.
    Example: one person who wanted continual motion using pan and zoom needed to go modify the transition positioning and the keyframing of the pan/zooms on every single slide after sending a slideshow from PSE to PRE.
    2- your requirement to
    "words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out."
    You can't really sync the audio to a slide in PSE. The text can't move or fade in/out. I think that it will be more grief to retrofit these functions to a slide show that was created in PSE than it will be to do the all the work in Premiere Elements.
    3- "Add the sound track for the ENTIRE slide show (this will be longer than i currently have slides for because i don't have all the photos"
    I am suspicious that adding the ENTIRE sound track in one PSE slide show will not work.
    I have done multiple sends from PSE slide show editor to Premiere Elements. However, I decided on the approach of using no audio in the PSE slideshow editor and adding Audio in Premiere Elements AFTER sending all the slide shows.
    Again, your objective of syncing specific photos to music points is good artistically - but I am concerned that it will make your PSE to PRE workflow problematic.
    4- "as new photos arrive, do the arrangement/pans/zooms in PSE and move them to PE"
    As Steve mentioned when you do subsequent sends of the slideshow, it appends to the end - does not seem to fit your objective of replacing part of the middle.
    Also if you get new photos in for the second section of the slideshow - but over in Premiere Elements you had already made other changes in the second section. There is no function to combine new changes doen in PSE and changes done in PE for that same "section" of the slideshow.
    5- you did not say whether you will be outputting this slide show in Full Screen or Widescreen format. Will you be burning a DVD? If you will be doing widescreen output, additional problems with specifying pan/zoom in PSE have been identified on various forums because the PSE pan/zoom boxes are not widescreen aspect ratio.
    Conclusion:
    Some of my comments here are definitely subjective - however, it is my overall conclusion that your objectives and work plan are not a good fit for the Photoshop Elements slide show editor to Premiere Elements workflow.
    My perspective on the Photoshop Elements slide show editor is that it is designed to simple, quick and easy. Therefore it has limitations.

  • Which is the best way to create a connection object

    hi,
    Eventhough i am not new to java I just wanted to know that which is the best way for creating sql connection object.
    Is it using the DriverManager.getConnection(..,..,..) or using a datasource and getting the connection.
    Which is more efficient or Is there any other way to create sql connection which is even more better.
    thanks in advance.
    pradeepbhargav

    AFAIK all connections, DataSource ones included are created by calling the DriverManager. A DataSource is a factory for Connection objects (from JavaDocs)
    If you're talking about managing connections then it depends on the application. A DataSource is great for apps that can support many clients or are multi-threaded, but may require a JNDI implementation to get to it.
    If however you have an single threaded app that hits the database in a serial fashion, then DataSource is probably an overkill.
    Dave

  • Best way to create tasks and assign to sharepoint groups

    Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
    I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
    they can mark it as completed.
    Is this the best way to go about it or am I completely off track?
    Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
    Thanks

    Hi  ,
    According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
    For the workflow, it is heavy  that  you need to create around 12000 (30*400) tasks .  In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
    blog:
    http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Is there a way to create a new Calendar that replicates all events

    Is there a way to create a new Calendar that replicates all events from a subscribed calendar ? Mobile Me is great but my most important Calendar is technically in the "Subscriptions" category so it doesn't get pushed to me iPhone. I want to create a new Calendar and have it just automatically copy all the events from the subscribed calendar and keep up to date with that one.

    lincolnroadjeff,
    I subscribed to a Holiday calendar that I also wanted to be published, and the only workaround that I found was to export the calendar, delete the subscription, and then import the calendar.
    This obviously will only work with a subscription that is not often updated/subject to change.
    ;~)

Maybe you are looking for