Best Way to Create Image Slideshow

I would like to create a story like the one "Our Picks This
Week" at
http://www.barnesandnoble.com/index....rid=2AS2GW5ENW.
What is the best, easiest, quickest way to create such a
slide show?
Thank you in advance.

If you are not very advanced with coding it would probably be
easier to do
in Flash.
Al Sparber - PVII
http://www.projectseven.com
The Finest Dreamweaver Menus | Galleries | Widgets
http://www.projectseven.com/go/pop
The Ultimate DW Menu System
"LarryBo" <[email protected]> wrote in
message
news:gl2gd5$mhp$[email protected]..
> What software would I need to create such a "scrolling
box?"
>
> I would like to create a left scrolling image slide show
with 4-5 images
> showing at a time and 10-15 total images. As a mouse
pointer is hovered
> over an
> image, I want the image to stop and revealing a pop-up
box showing the
> audio
> book's title, price and a link to its more information
page.
>
> Would this slide show be best done in Flash Pro,
FireWorks, Camtasia or
> other
> software?
>

Similar Messages

Best way to create customized counter for slideshow.

Hello everone. I am stuck on this one. What is the best way to create a customizable for the slideshow widgets. Im looking to create circles or boxes that change color in relation to the picture in the slideshow. I am sure that I have seen it on a muse site before, but just can't figure how to get it done. Thanks!

Have you tried using:
Effect > Text > Numbers ?
You could also have found that answer by searching for "numbers" at the Community Help site. It's really a great resource in addition to the online help files. Try it out!
(It would have been the first result returned from the search...)
http://www.adobe.com/support/aftereffects/

What's the best way to create a panorama from a series of images?

What's the best way to create a panorama from a series of images?

This is PhotoMerge result
This is WLPG
This is a manual merge
Before anyone comments on the poor image quality, I know. Its not my photography.
The beach huts were in an arc which doesn't help.
You can see that the photomerged image has not 'understood' the image and has bad destortion on the doors of some huts. The blend lines are also visible

What is the best way to create Aperture book from Pages '09 document?

What is the best way to create Aperture book from Pages '09 document?

There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

Best way to create SVG file from drawing application?

I am developing a drawing application that allow the users to draw and edit static two dimensional images such as Rectangles, Ellipses and Text. I have a superclass SVGShape that contains all the common features of a shape such as x1, x2, color etc. I then have SVGRectangle as a subclass of SVGShape.
I want to know what would be the best way to create an SVG file from this? An idea I have at the minute is to have an abstract method getSVG() in the SVGShape class, and then implement the method in the subclasses. I will then create a new class called SVGManager which iterates through the list of shapes (Btw I'm using MVC, my shapes are stored in a Collection) and uses the getSVG() mehtod in each shape to build up a SVG file.
What do you think of this? Any better ideas?
Thanks guys

I used a visitor for this in a similar project, so that when the svg library is used in a applet or browser and the writing functionality isn't required, it may be omitted from the bundle.
Pete

Best way to create a Template, and create "replace" where imported items ..

I would look to create a Template where I have photos that will be dropped into precreated "replace" areas and once imported, they will automatically be resized at a predetermined size I have chosen. I also want to preset all alignemnts: align top, distribute space horizontally. I am looking for the best way to create a drag & drop Template. I will make sure all images are the same size before importing them into Motion 2, if this helps.
As alwways thank you for reading and reply to my post,
Sebastian

sebastian:
first thing you could look for is the canned motion "replace me" graphics. they're grey with numbers in circles (1, 2, 3, etc) kinda like you'd see in an old movie countdown. they shoudl be buried somewhere in the Motion graphics content libraries. i'd use these as your placeholder graphics, name them "replace me #1" in the layer view.
second, if the sizing is important, you might have to place a pre-sized rectangular mask on each of the replacement objects. otherwise, when you drag an object onto layer object to replace it, the object will be resized to match the incoming object's aspect ratio and ruin your alignments.
PowerMac G5 2.5GHz Mac OS X (10.4.5)

Best way to create template

Can anyone suggest from experience, the best way to create VM templates (Golden Images for the organization) from existing VMs. I tried using the "clone" feature in VM Manager but looks like I will have to manually configure networking (IPs etc.) on the VMs created using these clones. I can write a script to do so but just wondering if there is better way out there. Something similar to the templates provided from Oracle that allow configuring IPs etc. on the first boot. I noticed there is a "Template Builder" product out there but not sure if it's a better option.
Edited by: user10016990 on Jan 29, 2013 9:10 AM

sebastian:
first thing you could look for is the canned motion "replace me" graphics. they're grey with numbers in circles (1, 2, 3, etc) kinda like you'd see in an old movie countdown. they shoudl be buried somewhere in the Motion graphics content libraries. i'd use these as your placeholder graphics, name them "replace me #1" in the layer view.
second, if the sizing is important, you might have to place a pre-sized rectangular mask on each of the replacement objects. otherwise, when you drag an object onto layer object to replace it, the object will be resized to match the incoming object's aspect ratio and ruin your alignments.
PowerMac G5 2.5GHz Mac OS X (10.4.5)

Best way to create slide shows in PE4 and PSE 6

What's the best way to create a fancy slide show in PE 4 and PSE 6? I need to create a slide show of about 600 pictures. I'm on Windows XP with 3gb RAM. I've done this a few years ago in earlier versions of PE and PSE. Before i plunge into this again i wanted to get some overall guidance for what to do or not do.
My ultimate goal is to create a slide show that:
1. uses pan and zoom on every photo
2. transitions between every photo
3. has an audio track
4. has some nice special effects -- words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out.
My view is that it's easy to accomplish #1-3 in PSE 6; it's quite simple to create a slide show, add pan and zoom, and transitions. However, #4 is not doable because adding text and graphics can only be done on a slide at a time and only when the slide start/stops (i.e., you can't have text appear 2 secs after the slide has started displaying and stay on screen while the next slide appears). Need PE 4 to do that.
What i'm wondering is:
-- is it best to create the basic slide show in PSE6 and then export to PE 4 to do the final fancy stuff, or is it best to just create the show in PE4? Seems that doing the pans, zooms, and transitions are easiest in PSE 6.

eric,
I am going to offer some reasons NOT to start this slide show in Photoshop Elements. This is despite the fact that I have used the workflow of starting in Photoshop Elements and used the Send Slideshow to Premiere Elements in PSE5 - PE 3 and PSE7 - PE7.
1- Timing differences between the PSE and PE slide show construction and processing
There are many differences in timing between the two products. Transitions can start/end slightly offset from their timing in PSE once they arrive and are processed in PE. Same for pan and zoom. Does this matter? Well the more precise your timing, the more potential for a show stopper.
Example: one person who wanted continual motion using pan and zoom needed to go modify the transition positioning and the keyframing of the pan/zooms on every single slide after sending a slideshow from PSE to PRE.
2- your requirement to
"words and graphics that appear on slide at precisely the right moment to match the song, and stay on the screen as one slide transitions to another. i want the text to be able to move and fade in and out."
You can't really sync the audio to a slide in PSE. The text can't move or fade in/out. I think that it will be more grief to retrofit these functions to a slide show that was created in PSE than it will be to do the all the work in Premiere Elements.
3- "Add the sound track for the ENTIRE slide show (this will be longer than i currently have slides for because i don't have all the photos"
I am suspicious that adding the ENTIRE sound track in one PSE slide show will not work.
I have done multiple sends from PSE slide show editor to Premiere Elements. However, I decided on the approach of using no audio in the PSE slideshow editor and adding Audio in Premiere Elements AFTER sending all the slide shows.
Again, your objective of syncing specific photos to music points is good artistically - but I am concerned that it will make your PSE to PRE workflow problematic.
4- "as new photos arrive, do the arrangement/pans/zooms in PSE and move them to PE"
As Steve mentioned when you do subsequent sends of the slideshow, it appends to the end - does not seem to fit your objective of replacing part of the middle.
Also if you get new photos in for the second section of the slideshow - but over in Premiere Elements you had already made other changes in the second section. There is no function to combine new changes doen in PSE and changes done in PE for that same "section" of the slideshow.
5- you did not say whether you will be outputting this slide show in Full Screen or Widescreen format. Will you be burning a DVD? If you will be doing widescreen output, additional problems with specifying pan/zoom in PSE have been identified on various forums because the PSE pan/zoom boxes are not widescreen aspect ratio.
Conclusion:
Some of my comments here are definitely subjective - however, it is my overall conclusion that your objectives and work plan are not a good fit for the Photoshop Elements slide show editor to Premiere Elements workflow.
My perspective on the Photoshop Elements slide show editor is that it is designed to simple, quick and easy. Therefore it has limitations.

What is the best way to prepare a slideshow?

So far, I've used iDVD to create a slideshow. And I just tried using iMovie to make a slideshow. Since I'm new to Mac, I'm not sure which is the best way to make a slideshow (or music video). Although I thought using iDVD was alot easier than iMovie, I'm only able to burn it onto DVD, not CD...
Would someone be kind enough to guide me into right direction? FYI, I don't have any third party softwares... I was hoping to make the best out of iMovie, iPhoto, and iDVD... but copying onto CDs not DVDs...
Thanks!

To burn a CD with all the transition effects and background tracks, consider making a VCD or SVCD, which can play on a lot of DVD players and PCs. The problem is, you'll need the third-party Toast software. The directions are here, but they're complex:
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_aMacintosh.html
Without Toast, you can pick "iTunes" from iMovie's "Share" menu, then burn it to a data CD from iTunes, which will play back on any Mac or PC with iTunes installed:
http://www.apple.com/ilife/tutorials/#imovie-sharing-30
If the iTunes file is more than 600MB, try exporting again with a smaller resolution. You may need to pick "Export to QuickTime..." from the "Share" menu, which may give you more aggressive compression options, then burn the saved file to CD through the Finder:
http://docs.info.apple.com/article.html?artnum=303599
There are a few other ways to make slide shows. One way is to use GarageBand to make an "Enhanced AAC Podcast", which will let you slip photos from iPhoto into a soundtrack periodically. You can drag your background track from iTunes into a new GarageBand project, then add photos. After exporting to iTunes as an enhanced AAC file, you can play the slideshow on any recent iPod or AppleTV, or burn it to a data CD from iTunes, which should play back in any Mac or PC with iTunes. You can also send it to a .Mac account via iWeb. This makes much smaller files, but you won't get the Ken Burns effect and other cool transitions. For more info:
http://www.apple.com/ilife/tutorials/#garageband-podcast-51
http://podcasting.about.com/od/enhancedpodcasts/f/enhancedpodcast.htm
http://docs.info.apple.com/article.html?path=GarageBand/4.0/en/6624.html
Message was edited by: Lithmac

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Best way to create pop-up menu's

Hi All,
I have been having a heck of a time doing something that i
would have assumed to be relatively simple - specifically creating
a pup-up menu.
My first set of approach was to dynamically create a movie
clip on a button rollover, and within that movieclip create several
other movie clips that i then assigned actions too. The problem was
that since i applied a action on "rollout" on the initial movie
clip, it became a button, and as such all of the sub
movieclips/buttons became in active (any click was only detected on
the parent).
My second set of attempts have been around the MenuComponent
(see other posts), but here too i have hit problems, initially with
animation and depth. I solved the animation issue, but the depth
problem remains.
Now, i see pop-up menu's everywhere, so i assume that this is
a relatively simple problem - so what am i missing. A google search
showed up lots of examples of how to do using menu that are created
in the UI (rather than purely in AS), using purchased components.
The first case is not an option since i need to create it fully
dynamically, the second would be an option - however i typically
need a far greater level of visual control than off the shelf
components provide (hence i have needed to build up my own class
library for many common tasks).
So after all that, i have a simple question.
"What is the best way to create a dynamic popup menu in
AS2?"
Regards
Neil

I guess you want to make your own popup menu, if I understand
correctly. Nothing simpler, your first attempt was in the right
direction, you just don't assign button actions to the parent clip,
because you won't get the child clips to work, but add another
child at the lowest level inside the parent, that acts as a
"background" clip/button.
And for the rollout for the entire popup, you can add a
transparent clip just under the popup (which is at the currently
topmost depth) covering the entire stage, give it rollover that
acts as your rollout, and make it not use the hand currsor, so you
can't tell it's there.
That's how I do it, anyways..

WHAT IS THE BEST WAY TO CREATE AN XSD FILE (TO BE USED BY SOAP ADAPTER)

Dear friends
I have a simple scenario.
OUTBOUND DATA --> SOAP ADAPTER --> ( XI ) --> RFC ADAPTER --> INBOUND DATA
The XML file that I got from mapping area of IR (Design) is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_NAME_SOURCE xmlns:ns0="http://test3.com">
<FIRSTNAME>DAVE</FIRSTNAME>
<LASTNAME>SMITH</LASTNAME>
</ns0:MT_NAME_SOURCE>
If you notice, there are only 2 fields.
I need to create an XSD file and import it as an external object, which I can use for SOAP Adapter.
Which is the best way to create it.
Also, I need to know if there is any step by step of sending a message from XML SPY. I have downloaded this software, but am not able to undertand how to use this.
Hope to hear from any experts on this forum.
Thanks in advance
Ram

Hi Ram,
See the below blog..
It shows how to send SOAP message using XML Spy.
It also shows how to generate wsdl.
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Regards,
Sumit

What is the best way to create business documents in CRM

Hi All,
What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
Please help.

Ashim,
Try looking at the program:
CRM_TEST_ORDER_MAINTAIN
I think that should help you figure out the parameters.
Good luck,
Stephen

Best Way to Create Image Slideshow

Similar Messages

Maybe you are looking for