Best way to create template

Can anyone suggest from experience, the best way to create VM templates (Golden Images for the organization) from existing VMs. I tried using the "clone" feature in VM Manager but looks like I will have to manually configure networking (IPs etc.) on the VMs created using these clones. I can write a script to do so but just wondering if there is better way out there. Something similar to the templates provided from Oracle that allow configuring IPs etc. on the first boot. I noticed there is a "Template Builder" product out there but not sure if it's a better option.
Edited by: user10016990 on Jan 29, 2013 9:10 AM

sebastian:
first thing you could look for is the canned motion "replace me" graphics. they're grey with numbers in circles (1, 2, 3, etc) kinda like you'd see in an old movie countdown. they shoudl be buried somewhere in the Motion graphics content libraries. i'd use these as your placeholder graphics, name them "replace me #1" in the layer view.
second, if the sizing is important, you might have to place a pre-sized rectangular mask on each of the replacement objects. otherwise, when you drag an object onto layer object to replace it, the object will be resized to match the incoming object's aspect ratio and ruin your alignments.
PowerMac G5 2.5GHz Mac OS X (10.4.5)

Similar Messages

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

Best way to create a Template, and create "replace" where imported items ..

I would look to create a Template where I have photos that will be dropped into precreated "replace" areas and once imported, they will automatically be resized at a predetermined size I have chosen. I also want to preset all alignemnts: align top, distribute space horizontally. I am looking for the best way to create a drag & drop Template. I will make sure all images are the same size before importing them into Motion 2, if this helps.
As alwways thank you for reading and reply to my post,
Sebastian

sebastian:
first thing you could look for is the canned motion "replace me" graphics. they're grey with numbers in circles (1, 2, 3, etc) kinda like you'd see in an old movie countdown. they shoudl be buried somewhere in the Motion graphics content libraries. i'd use these as your placeholder graphics, name them "replace me #1" in the layer view.
second, if the sizing is important, you might have to place a pre-sized rectangular mask on each of the replacement objects. otherwise, when you drag an object onto layer object to replace it, the object will be resized to match the incoming object's aspect ratio and ruin your alignments.
PowerMac G5 2.5GHz Mac OS X (10.4.5)

What is the best way to create Aperture book from Pages '09 document?

What is the best way to create Aperture book from Pages '09 document?

There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos.

Best way to create menus [was: Queston]

What technique or is a template used to create the menu for this Adobe page? I have been studying web development (reading and tutorials) and the sections are always short on creating menus. Mostly, covers creating buttons with behaviors in Fireworks and inserting them into Navigation Bars and Tables? What are the best ways to create menus?
[Subject line edited by moderator]

Howdy,
The best way is definately not the Fireworks way. Never has been.
Take RJweb's advise and check out the PVII Menu Magic. I use that all the time and its very easy to customize with its well laid out CSS files. I havn't found anything easier to use and customize yet.
Brad Lawryk
Community Expert: Dreamweaver
Usergroup Manager: Northern British Columbia Adobe Usersgroup

KEA0 what is the best way to create new Operating concern

Hello :
Please advise
1. what is best way to create new OP concern
copy from template or create data structure from scratch?
2. I try to copy from OP concern = IDEA but when click change DATA STRUTURE -I see only CE1xxx but I not see CE2xxxx, CE3xxxx, CE4xxxx ...
pls advise - how to? can I change data structure on CE2, CE3....
Thx in advance.
Manthana

If your data structure will be the same then do a copy. if the data structures are different then create from scratch ( or modify after copy). Copy saves time so you don't have to start from scratch.

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Best way to create pop-up menu's

Hi All,
I have been having a heck of a time doing something that i
would have assumed to be relatively simple - specifically creating
a pup-up menu.
My first set of approach was to dynamically create a movie
clip on a button rollover, and within that movieclip create several
other movie clips that i then assigned actions too. The problem was
that since i applied a action on "rollout" on the initial movie
clip, it became a button, and as such all of the sub
movieclips/buttons became in active (any click was only detected on
the parent).
My second set of attempts have been around the MenuComponent
(see other posts), but here too i have hit problems, initially with
animation and depth. I solved the animation issue, but the depth
problem remains.
Now, i see pop-up menu's everywhere, so i assume that this is
a relatively simple problem - so what am i missing. A google search
showed up lots of examples of how to do using menu that are created
in the UI (rather than purely in AS), using purchased components.
The first case is not an option since i need to create it fully
dynamically, the second would be an option - however i typically
need a far greater level of visual control than off the shelf
components provide (hence i have needed to build up my own class
library for many common tasks).
So after all that, i have a simple question.
"What is the best way to create a dynamic popup menu in
AS2?"
Regards
Neil

I guess you want to make your own popup menu, if I understand
correctly. Nothing simpler, your first attempt was in the right
direction, you just don't assign button actions to the parent clip,
because you won't get the child clips to work, but add another
child at the lowest level inside the parent, that acts as a
"background" clip/button.
And for the rollout for the entire popup, you can add a
transparent clip just under the popup (which is at the currently
topmost depth) covering the entire stage, give it rollover that
acts as your rollout, and make it not use the hand currsor, so you
can't tell it's there.
That's how I do it, anyways..

WHAT IS THE BEST WAY TO CREATE AN XSD FILE (TO BE USED BY SOAP ADAPTER)

Dear friends
I have a simple scenario.
OUTBOUND DATA --> SOAP ADAPTER --> ( XI ) --> RFC ADAPTER --> INBOUND DATA
The XML file that I got from mapping area of IR (Design) is as follows
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_NAME_SOURCE xmlns:ns0="http://test3.com">
<FIRSTNAME>DAVE</FIRSTNAME>
<LASTNAME>SMITH</LASTNAME>
</ns0:MT_NAME_SOURCE>
If you notice, there are only 2 fields.
I need to create an XSD file and import it as an external object, which I can use for SOAP Adapter.
Which is the best way to create it.
Also, I need to know if there is any step by step of sending a message from XML SPY. I have downloaded this software, but am not able to undertand how to use this.
Hope to hear from any experts on this forum.
Thanks in advance
Ram

Hi Ram,
See the below blog..
It shows how to send SOAP message using XML Spy.
It also shows how to generate wsdl.
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Regards,
Sumit

What is the best way to create business documents in CRM

Hi All,
What is the best way to create business documents like contract, sales order, debit memo etc in CRM ? Unlike R3 we can't use our good old BDC with recording. Moreover for most of them although there are Business Object but no BAPI to creation so what is the way ? I found in SDN there are two MAGIC Function module CRMXIF_ORDER_SAVE. Do I need to that alawys ?
Is it nees to via IDoc and cannot be done just by calling from ABAP program ? The input parameter of the FM is a complex deep structure.
Please help.

Ashim,
Try looking at the program:
CRM_TEST_ORDER_MAINTAIN
I think that should help you figure out the parameters.
Good luck,
Stephen

Best way to create slide show with last photo having links

What are some of the best ways to create a slide show (more like a season greeting flash) with the last photo having links and buttons for the viewer to click?
I already have the code for the slide show. What I need now is how do I reference or point to a keyframe that contains the last slide as the background with buttons and hyperlinks? Perhaps, I also need a way to not showing this slide until the last? How do I do that? This last slide with buttons and links are on it's own layer.
The other route would be to create the buttons and hyperlinks in the AS3 code instead of design time. If so, how do I do on the last slide?

What are some of the best ways to create a slide show (more like a season greeting flash) with the last photo having links and buttons for the viewer to click?
I already have the code for the slide show. What I need now is how do I reference or point to a keyframe that contains the last slide as the background with buttons and hyperlinks? Perhaps, I also need a way to not showing this slide until the last? How do I do that? This last slide with buttons and links are on it's own layer.
The other route would be to create the buttons and hyperlinks in the AS3 code instead of design time. If so, how do I do on the last slide?

What is the best way to create a database schema from XML

What is the best way to create a database schema from XML?
i have a complex XML file that I want to create a database from and consistently import new XML files of the same schema type. Currently I have started off by mapping the XSD into Excel and using Mysql for Excel to push into MySQL.
There must be a more .net microsoft solution for this but I cannot locate the topic and tools by searching. What are the best tools and way to manage this?
Taking my C# further

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create CRUD datagrids

What is the best way to create CRUD datagrids that tell CF
components to update sql tables. I find that I'm having to vreate
all these columns with custom properites and its a bit of a chore:
<mx:DataGridColumn id = "NatWest" dataField="NatWest"
headerText="NatWest" editable="false"
wordWrap="true"
textAlign="right"
headerStyleName="centered"
labelFunction="price_labelFuncNatWest"
sortCompareFunction="price_sortCompareFunc">
I don't really want to use any wizards as I want control over
my code.

Hi Saythj,
When mentioning "a database schema from XML", do you mean the
XML Schema Collections? If that is what you mean, when trying to import XML files of the same schema type, you may take the below approach.
Create an XML Schema Collection basing on your complex XML, you can find
many generating tools online to do that.
Create a Table with the above created schema typed XML column as below.
CREATE TABLE youTable( Col1 int, Col2 xml (yourXMLSchemaCollection))
Load your XML files and try to insert the xml content into the table above from C# or some other approaches. The XMLs that can't pass the validation fail inserting into that table.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

What is the best way to create a read more/collapse text box on the homepage of a site?

What is the best way to create a read more/collapse text box on the homepage of a site?

I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

Best way to create template

Similar Messages

Maybe you are looking for