Best way to embed

What is the best way to embed a previously created flash application into another flash application?

load it into a target movieclip unless you have no ability to edit the fla in which case you'll have fewer problems if you load it into a _level.

Similar Messages

Best Way to Embed Flash in DW??

What is the best way to embed a flash movie in Dreamweaver
w/o messing up cells/rows of a previous creation?
I have a site together & want to insert a movie on a page
& keep the nav bar the same from all the other pages , when I
insert the Flash movie it royally messes up all the rows &
cells
here's the site
www.castleblak.com
just want to keep the nav bar same on all pages!
thanks!

tommypenngotti,
> What is the best way to embed a flash movie in
Dreamweaver
> w/o messing up cells/rows of a previous creation?
"Messing up cells/rows" could mean quite a few things. For
example, you
would certainly have trouble trying to pack a 550 x 200 SWF
into a cell
whose dimensions were 50 x 22. Is that what you mean?
> I have a site together & want to insert a movie on a
page &
> keep the nav bar the same from all the other pages ,
when I
> insert the Flash movie it royally messes up all the rows
& cells
I checked out your URL, but didn't see any Flash on the home
page. In
fact, I didn't see Flash on any of the pages, but admittedly,
I only clicked
into a a few. I wonder if you mean that Flash content appears
*on top* of
your drop-down navigation -- is that it? If so, there's an
Adobe TechNote
on this issue, described here ...
http://www.quip.net/blog/2006/flash/how-to-position-flash-beneath-other-content
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Best ways to embed Video??

What is teh best way to embed video in DW? Quicktime, WMV,
streaming? I have tried a few with varing results across different
browsers...
And suggestions - I have seen some very cool interfaces out
there but sadly the source for the player interfaces I cannot
find..
Any help would be appreciated..
I need the ability to set auto play or not - and other
options for video in the browser window or at least in DW.
Thanks in advance

If you have the entire Studio, I would definitely convert to
Flash Video and
use the DW Insert/Flash Video dialogue to insert it. You have
a choice of
skins and you can set a lot of options .. surely the ones you
mention. Best
part is Flash Video is crystal clear with the ON2 codec in
Flash 8 and you
won't believe how small the file is, compared to the other
options.
Nancy Gill
Adobe Community Expert
BLOG:
http://www.dmxwishes.com/blog.asp
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner's
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"brentwic" <[email protected]> wrote in
message
news:e9famm$su1$[email protected]..
> What is teh best way to embed video in DW? Quicktime,
WMV, streaming? I
> have
> tried a few with varing results across different
browsers...
>
> And suggestions - I have seen some very cool interfaces
out there but
> sadly
> the source for the player interfaces I cannot find..
>
> Any help would be appreciated..
>
> I need the ability to set auto play or not - and other
options for video
> in
> the browser window or at least in DW.
>
> Thanks in advance
>
>
>

What is the Best Way to Embed PDF in HTML?

In the past, I have included one page PDF's in web pages by placing the PDF in an iframes. This worked fine until recently. Starting with Safari 5.1.2 running under OS X 1.6.6, instead of opening within the original page, the PDF has opened in a new tab. Is there some other way to embed the PDF so this doesn't happen? Many thanks to all!

Move it into Flash and insert it as a progressive download.
http://blog.deconcept.com/2005/03/31/proper-flash-embedding-flashobject-best-practices
You can see it happen here on my site -
http://38.144.80.95/n_why-neapco.php
The central movie is a QT piece imported into Flash and then
saves as a
Flash video.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"wadup" <[email protected]> wrote in message
news:e3qvmq$8aj$[email protected]..
> dreamer thanks for the response....
>
> however i wasnt asking how to do it......
>
> i am asking what people think is the best method of
doing it.........
>
> should i embed a .mov file or should i import the move
into flash and then
> embed the flash file? should i embed a .wmv file?
>
> etc etc....
>

Best way to embed playable movies on website?

I have a video clip that I neede dto break down into pieces
and put in viewable form on a website. The file is currently a .wmv
file.
My plan was to use flash to make files that I could embed in
the website, and the end user could click on it to play it in the
web page. In reading how to do it in flash, it looked like there
was some action script requirements, I am not sure best how to make
it happen.
What is the best way to get my videos on the site? Should I
stick with flash, or get a reasonably priced 3rd party program that
automates the process, or go another route?
(PS- what would be the best format of movie to use as
well?)

"Dannoman88" <[email protected]> wrote in
message
news:g7q9b8$a70$[email protected]..
>I have a video clip that I neede dto break down into
pieces and put in
>viewable
> form on a website. The file is currently a .wmv file.
>
> My plan was to use flash to make files that I could
embed in the website,
> and
> the end user could click on it to play it in the web
page. In reading how
> to do
> it in flash, it looked like there was some action script
requirements, I
> am not
> sure best how to make it happen.
>
> What is the best way to get my videos on the site?
Should I stick with
> flash,
> or get a reasonably priced 3rd party program that
automates the process,
> or go
> another route?
>
> (PS- what would be the best format of movie to use as
well?)
Hopefully your WMV is not already compressed/downsized from
the original
video. If it is, go back to the original file first. Take the
video file
into the Flash Video Encoder and make an FLV file. Then you
can either use
DW's built-in Insert | Media | Flash Video or you can use a
3rd party like
the JL FLV Media Player -
http://www.jeroenwijering.com/?item=JW_FLV_Media_Player

Best way to embed an Mov file into interactive flash game?

Hey,
just a quick query. I'm creating an interactive flash game for a university project. It's along the lines of Guitar Hero, Tap Tap Revolution, Boom Boom Rocket etc..
At the moment the game comprises of streaks of notes generated by Actionscript which the user much hit the corresponding key when notes are in the receptor. The background at the moment is an audio spectrum analyser created using AS based on the music playing.
I want to add loop movie file as the very background of the stage and was just wondering what was the best way to place it there with the least ammount of overheads. At the moment I have it in a child movie clip placed on the stage, in which I use File -> Import and embeded the FLV file into the time line. This works, however lags out quite badly.
Any help would be appriciated.
Thanks in advance,
John Minns

Have you tried this method?
1. Save as new file.
2. With your usual color management preferences selected, run Xtras>Color>'Name all colors'.
3. In color swatches list, select all colors. From swatches pop-up menu 'Make RGB'.
4. In Preferences>Color, set color management settings to 'None'. The RGB colors should look about the same as they did with color management on.
Now you should be able to export to Flash with RGB colors that look quite close to your CMYK version of the file.
This should work the same in FH9 or FHMX. I hope it does the trick for you.

What is the best way to embed a multilanguage option on a wesite

I need to embed an option for viewers to see the site in German or Spanish.
Thanks for any recommendations.

When a website is managed by a CMS (content management system), it becomes possible to manage multiple languages easily. CMS clients can select the languages they want to use on their websites and translators can work on the content, all while the web developer sits on the beach drinking margaritas.
Illustrated below is the language selection menu my clients use to manage their language choices. I developed this system because my clients would come to me and say: "OK, now we want to add Russian" and I would then have to make lots of little changes throughout the website to accommodate it.
This method does require relational database features so content for a new language can be added on-the-fly.
In the chart above, "active" means that the language option is ready to be presented on the website. You can see that Russian has been selected but is not active, because translators are still working on the Russian material. Also note that the default language doesn't have to be English.
I use url parameters rather than sessions to pass language selection from page to page so if someone shares a link to a page, it will appear in the expected language, like this:
/topic/de/ufo_lands_in_berlin
To sanitize the url variable, I match the parameter to a lookup:
// WHAT LANGUAGE WILL BE USED
$safe = array("en","vi","zh","de","fr","es","he","nl","ru","ja");
if(in_array($lang_type[1], $safe)) {
$lang_select= $lang_types[1];
} else . . .
The languages for site visitors to choose from are presented like this:
//languages
$sql=$dbh->prepare("SELECT language.language_id, language.language_name FROM language, language_client WHERE language.language_id = language_client.language_id AND active=1");
try{
$sql->execute();
}catch(PDOException $e)
{echo $e;}
while($result = $sql->fetch(PDO::FETCH_ASSOC)){
$i++;
$language_id=$result['language_id'];
$language_name=$result['language_name'];
$sel= ($language_id == $language_selected)? "style = 'color:red;text-decoration:none;'" : "style = 'color:#333;text-decoration:none;' ;
$language_block.="<a $sel href ='$domain/$language_id/$page_type2$pm2$pm3$pm4'>$language_name</a> | ";
$language_block = ($i > 1 )? "<p style='text-align:right'>$group_block$language_block</p>" : NULL;
Note that in the above, the language menu is displayed only when two or more languages are active, so if, for some reason, the client decides they no longer wish to serve those who don't talk English good, the language menu will simply disappear.

What is the best way to Place/Embed/Link swf files to play in my Muse website?

I have some older swf files that I created and would love to have them play on my webpage in my Muse website. As soon as I use the place command to put them on a page, Muse crashes when I try and preview that page or publish the site. I'm new to Muse so maybe I should be using an alternate method of bringing those swf files in.
Also, I would like to use some of the Reallusion programs to create a "talking head" that introduces my website when visitors enter. But Crazy Talk 7 only seems to want to create avi files. What is the best way to get avi's to play in Muse? I have posted this question in the Flash forum also.
Is there a program in the Creative Suite package that would be better to use to create this talking head or a workflow that will make these videos usable on the pages of Muse?

Hi Jeanette,
Please refer to the following forum post : http://forums.adobe.com/message/5122837#5122837
Cheers!
Aish

What's the best way to back up to the cloud?

I am going to be traveling in the on a boat in Europe. Access to wifi could be limited and slow. I want to back up my photos and catalog to the cloud as there is potental to lose laptop and external drive. Since I have a 25 mp camera and will be shooting in Raw allot, there will be some big files as each photo could be around 27 gb.
All of my files will be in the My pictures folder LR set up when I set up my new catalog. I planned to back up these folders to the cloud, then send just the new folders each time I add them to LR during import. Then I was going to have the catalog BK that is created each time you close LR (just the data only is in this file) sent to the cloud as well.
Then if my laptop is lost I can copy the back up catalog (just the data file) and the My Pictures file that has all my photos in folders to a new laptop and restore my catalog. I'm told by Adobe help that this won't work as the connection between the photos and the catalog back up will be lost.
Is this correct? And if so, what's a better method.

Thanks Jim, and yes I meant 27 mb. Will be living on a sail boat so there is potential to lose both the laptop and external drive. The cloud was to be my 3rd copy
Date: Fri, 20 Dec 2013 16:53:44 -0800
From: [email protected]
To: [email protected]
Subject: What's the best way to back up to the cloud?
    Re: What's the best way to back up to the cloud?
    created by JimHess in Photoshop Lightroom - View the full discussion
You really have images that are 27 GB each? I suspect you meant 27 MB. But, even then, I think cloud backup might be cumbersome. I would suggest carrying a small external hard drive. I have a 1 TB USB 3 drive that is really fast and very small. No external power supply. Plug it in, and copy the files. That's what I would do.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948781#5948781
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948781#5948781
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948781#5948781. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

What is the best way to add external C++ code to LabView 6.1?

I have various C++ class-based DLL's written with Visual Studio 6.0 and wish
to create instances of these C++ classes and call their methods in LabView
6.1. What is the best way to do this?
It seems based on the little reading I have done that there are two choices:
1. Wrap the C++ class as a simple COM control and use LabView's COM based
VIs to create a COM object and access the methods of various interfaces.
2. Wrap the C++ class methods as C functions and a "constructor" and
"destructor" C function to create and destroy an instance of the class. Then
use LabView's DLL call support.
Which is best? What direction is LabView going to take that better supports
the notion of C++ class libraries?
Thanks,
Te
rry

You could also try using a CIN. This is a tool that LabVIEW provides for interfacing with external code.
The CINTools libraries of LabVIEW allow you to embed compiled C code into a particular Virtual Instrument (VI) using a CIN.
In order for LabVIEW to be capable of calling compiled functions of C from a running VI, the code must be loaded and unloaded into memory at the same time as the VI code itself. LabVIEW uses object code in the form of a .lsb file which is generated by the C compiler from the C source code using the ntlvsbm.mak file. This ntlvsbm.mak file is included in the CINtools directory in the LabVIEW folder. You also must create another .mak file which includes parameter definitions for the ntlvsbm.mak file and also includes a call to the LabVIEW .mak file.
The generic documentation for CINs only explains how to use them to call C compiled code from a LabVIEW VI. It shows several development environments such as Visual C++, but in essence it only allows the user to create .lsb files out of plain C source code ( .c ) through C compilers on those environments.
The question now is how can I create .lsb files from C++ native source code using a C++ compiler. Furthermore, how can I create a .lsb file from several C++ source code files (.cpp) and make calls to C++ functions from a VI using CINs? The following explains how to do this:
1) Drop a Code Interface Node (from the Advanced Subpalette of the Functions Palette) into the LabVIEW VI. Make sure to wire the inputs.
2) Right-click on the CIN and choose "Create.c File...", then in the file dialog box specify a "name.cpp" file name. (very important: use .cpp extension)
3) Then create a name.mak makefile (text file) and add the following lines :
name=name_of_cpp_file_without_the_extension
type=CIN
cinlibraries=Kernel32.lib
CINTOOLSDIR=path_to_cintools_directory
!include <$(CINTOOLSDIR)\ntlvsb.mak>
4) Go into Visual C++ and File>Open and open the .mak file. You can even Add the name.cpp file to the project to make it easier to edit. Select that name.cpp or open it as a text file in NotePad or and edit the prototypes of the CIN MgErr functions as shown below, adding extern "C" at the beginning of the line. extern "C" CIN MgErr CINRun(float64 *INPUT);3) Select Build.exe to create the "name.lsb" file. To import the .lsb into LabVIEW, right-click on the CIN and choose "Load Code Resource...". Then, choose the name.lsb file and it is ready to run!
If you want to use several C++ source code files with .cpp extensions, then compile them in Visual C++ and link them to name.cpp and create a .lsb by modifying the name.mak as follows:
name=name_of_cpp_file_without_the_extension
otherobj=other_cpp_files_BUT_USING_.obj_extension
type=CIN
cinlibraries=Kernel32.lib
CINTOOLSDIR=path_to_cintools_directory
!include <$(CINTOOLSDIR)\ntlvsbm.mak>
It's worth a try? I have also heard of using clusters to represent classes, so you could check that out.
J.R. Allen

Best way to insert 300dpi photo's into Ilustrator file for print

I am creating a 5.5 X 8 postcard style card for print. I need to place 15 photographs that are aprox. 1.5 X 2.5 each. What is the best way to insert these files so that my file doesn't become too large? I will be making a PDF of the final artwork to send to the printer. Your guidance is much appreciated!!

Link don't embed the images. Use a layered format such as .psd, .tif, or .pdf. Psd is not lossy, .tif can be lossy if you modify the default settings, .pdf you choose how much compression you want, and a small amount of compression can make a much smaller file size.
I would recomend using .psd, in cmyk color space. When you make your pdf for printing is when you will decide how much compression and which pdf preset you will use(press ready or PDF X should be a good choice). That will be your important choice.

What is the best way to integrate a sound file (mp3) into a PDF?

I saw that its possible to do it by Tools->Multimedia->Sound. This works fine on a computer but not a tablet. So what is the right way to embed a sound file into a PDF of maybe by Indesign? What i want is that people can easily open a document (PDF) on a tablet and when they click on a (play)icon that they hear a sound file. The best thing is that they can stop or put it on pause.

I think this functionality relies on Flash, so it's not likely it's going
to work on mobile devices, certainly not on iOS ones.

Best practice to embed flex application in html

Hello guys
I am not sure what's the best practice to embed the flex application. We couldn't use html code in flex builder. Would you guys edit the html files via other tools to embed the swf file after the application is completed or there are other ways to do it. Thanks for the reply.

Hi Jerry,
Why you couldn't use the html code generated in flex builder. In the html wrapper file generated in FlexBuilder you have SWF embed code directly along with the Flash Player detection javascript code...If your users don't have the FlashPlayer installed or if they don't have the latest Flash Player version installed then the application will prompt the users to install the latest Flash player plugin..
What's the problem that you have got by using the html wrapper file generated in FlexBuilder..
Thanks,
Bhasker Chari

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to create an ".scc" closed-caption file?

*I merely need to create an ".scc" file. I do NOT need to embed it myself.*
My project is a 98-minute movie in English that needs closed captioning. I'll be delivering the .scc file to a post-production house who will make the final merger of .scc file to the already-created tape. So MY QUESTION IS what software options do I have?
I hear about MacCaption. I try surfing the web to find a purchase page but I only find Demos or strangely cheap prices (like $5.00). I read all these posts that hint at its high price. Maybe I'm totally missing an obvious link but can someone tell me what is a good cheap program for creating ".scc" files for FCP? And if MacCaption is the best choice, what's the best way to download it?
Shanked

Michael,
I've been to the link you pointed out, for MacCaption. I must be missing something but I cannot find any price anywhere on that site. I emailed them and have yet to hear a direct quote.
As for Annotation Edit, thanks. That's a good tip. Seems like it's a steep $300 US, but that's better than the $980 I'd have to pay a lab for the service.
If anyone else knows of a cheap alternative (for this one-time usage), please LET ME KNOW!
thanks,
Shanked

Best way to embed

Similar Messages

Maybe you are looking for