Best way to enlarge raw files?...

I want to increase longest side to 17'' on many raw files : these are nef files
what would be best way to maintain file quality...
Do my raw develop work, including capture sharpening, and on export increase largest side to 17"?...or the pixel equivalent...
Would it be better to do my pp work, set capture sharpen to zero, export to photoshop and enlarge with bicubic smoother and then apply capture sharpen?...
or is there a different, better way?...
thanks for the help...oh, i'm using lr2.6 and photoshop cs3...
M

Hmm, that looks bad indeed. I have mostly compared prints and I thought they
looked quite a bit better upsized in Lightroom than in PS using bicubic
especially with sharpening thrown in the mix. What looks best in print is
often not what looks best on screen as you know. Also, I simply cannot get
my LR 2.6 or 3 beta to do this with very similar images. Curious as I know
LR used to do stuff like this badly in older versions.
2010/2/23 Dorin Nicolaescu-Musteață <[email protected]>
Lightroom's scaler now gives better results than bicubic in PS CS3 and
also has built in output sharpening.
I might be doing something wrong, but my tests show the opposite:
http://forums.adobe.com/servlet/JiveServlet/showImage/20561/Resize.jpg
Click to zoom to 100%.
>
This is a 10mpx file resized to about 1 meter on the long side at 180 ppi.
I can see a lot of stair-stepping in Lightroom's version compared to
bicubic smoother, which is, well, a lot smoother.
>

Similar Messages

The best way to enlarge an image for print?

Hello
I've been designing for print for several years. Occasionally I design large display posters/banners (A0, 6-sheet, billboard etc) which use a photographic image. Assuming that the image I have is smaller at 300ppi than the final print, what is the best way to enlarge the image? Based on my experience, it seems that there are three options (to make it simple, the example here assumes that my image is exactly half the size it needs to be printed at. I'm also assuming that the file I will supply to the printer will be a high res pdf exported from Indesign):
1. Set up the Indesign file at 100% size, place the photo and have Indesign upscale the image to 200%. Export a high res pdf for print.
2. Set up the indesign file at 50% size, place the photo with no upscaling by Indesign. Export a high res pdf and have the printer blow it up to 200%.
3. Set up the Indesign file at 100% size, enlarge the photo in Photoshop to 200%, and place the photo with no upscaling in Indesign. Export a high res pdf for print.
I have been advised that having Indesign upscale the image is not a good idea, and I never do this. I guess that option 3 is probably best, with Photoshop doing the work and the resulting pdf being the correct size. However, it's not always possible to do this – some posters are huge which means that the enlarged photo and the high res pdf will both be huge files, and I think also Indesign has a maximum document set up size anyway. So sometimes I use option 2.
So firstly, why is it a bad idea for Indesign to upscale the image (as I say, I never do this, but I would like to know the technical reason)? Secondly, if the choice is between re-sizing myself in Photoshop prior to exporting the pdf, or having the printer enlarge a high res pdf, which is better? When I say 'better' I mean in terms of the quality/sharpness of the end result. Also, I assume that vector elements in my design will not be adversely affected in either scenario, is that assumption correct?
Thanks

Sorry for the added confusion. It appears, after doing some checking in my CS2 apps ( InDesign), there is no setting for DPI / Output Resolution. Only Transparency Flattener Setting. See screen shot below...
If you select Postscript File in the Print Presets, you can access resolution settings for transparency flattening there, too...
in the "Advanced" tab dialog...
But, I like having the option in Illustrator 10 File > Document Setup where I can set the output resolution to whatever is appropriate. In this case ( below ) I've got it set for 5080dpi / 300ppi. You also have Effect > Document Raster Effect Setting where you can select 300ppi ( see screen shot below )...
...and Raster Effects Resolution setting...
I may have misled you because the apps I have are not CS6; but you should be able to follow along in your CS6 apps in various settings dialogs. Mainly, resolution settings can be set in the Print dialog boxes.
The main thing to keep in mind is, because you are enlarging upon output, the base scaled down file must have enough resolution to maintain its appearance at the final size. In the case of 50% or 25% file resolution should be maximum ( for current apps it appears 300ppi is considered high resolution. Most apps now leave output resolution setting adjusted in the RIP / Print driver.
I still use Distiller because it allows me to setup custom PDF settings and save them for future use. You very well may be able to do that in CS6 apps; but I have a tried-and-true workflow that utilizes Distiller as a personal preference.

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?

Is there a way to import Raw files into LR catalog ..including..any edits performed in an external raw file editor such as Capture One?
I can import the Raw file successfully but cannot see any edits that were applied in Capture One. Im assuming no but just checking.

Your assumption is correct, Capture One, Lightroom and other third party raw processors have their own proprietary processes and profiles for rendering the raw data.
They do not make permanent changes to the raw data and store the changes to an .xmp file or to a catalog file like Lightroom.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

Best way to handle text files in OD10g

We have a requirement to store reports in text format into a database field, to be able to view the reports, and to print them if desired using Forms 10g. What is the best way to handle this?
- define the field in the database as clob or blob?
- if CLOB is the choice, what tools to use to upload CLOBs to the database (since webutil transfer is for blob only)?
- in Forms 10g, can one use the Forms data type LONG for CLOB?
- can you do Forms search on clob and blob fields?
- how can reports that are stored in fields be viewed without first downloading to the client workstation?
- in Forms 10g, what is the best way to view text files residing in local PCs: "host notepad myFile"?
Thanks much for your reply!
gk

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. What is the best way to keep the files in these machines synchronized?

I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?

How did you transfer the files to the iMac. If you exported the files out of the MB library using Kind = Current you should get the edited version. Any other option may not.
If you want to keep the two libraries "synced" any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode, Transferring files between two computers using FireWire, with WiFi. and use the paid version of iPhoto Library Manager to copy that album from the MB library to iMac library. It will also copy the original and edited versions, keywords, titles, etc.
OT

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed?

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed? I am running Mavericks and use an AirPort Time Machine to back-up all my files.

Back up all data on the internal drive(s) before you hand over your computer to anyone. You need at least two independent backups to be completely safe. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore to an empty drive.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

What is the best way to enlarge a part of a photo in lightroom? How much cn you enlarge it and get

what is the best way to enlarge a part of a photo in lightroom? How much cn you enlarge it and get an acceptable result?

The way I would do it would be to crop the image so that it only displays what you want, then export that image and specify the dimensions. You will have to experiment with different export sizes to determine what would be acceptable for your situation. You might be more forgiving or more demanding than anyone who would venture to answer that question. That's the nice part about digital photography; you can experiment to your heart's content until you get the result you are looking for.

What is the best way to merge a file content into log file

What is the best way to merge a file content into log file.
In worst case, I will read the file line by line as string, then use
logger.info(lineString)to output to log file.
However, is there better way to do this?
The eventual log file will be something like:
log message 1
log message 2
content from file line 1
content from file line 2
content from file line 3
log message 3
log message 4Thanks

John618 wrote:
Thank you and let me explain:
1. What do you mean by better?
I would like to see better performance. read line by line and log each line as string can be slow. Did you measure this and determine that it is actually a problem for your application? Or are you guessing?
Regardless of what you do you are still going to need to read the file.
>
2.The only better way I can think of is not having to do it, but I assume you have a very good reason to want to do this.
Yes, I have to do it beacuse the requirement is to have that file content be part of logging.
Any idea?How is it supposed to be part of it? For example which of the following is better?
        File AAA - contents
                   First Line
                   Second Line XXX
        Log 1
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: First Line
                2009-03-27 DEBUG: Second Line XXX
                2009-03-27 DEBUG: Random following line
        Log 2
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: ----- File: AAA -------------
                First Line
                Second Line XXX
                2009-03-27 DEBUG: Random following lineBoth of the above have some advantages and disadvantages.
The first in a mult-threaded app can end up with intermittent log entries in between lines, so having log lines with thread ids becomes important.
The first can be created by reading one line at a time and posting one at a time.
The second can be created by reading the entire file as a single string and then posting using a single log statement.

What is the best way to find a file on the servers disk without using web.xml?

          What is the best way to find a file on the servers disk without using web.xml?
          I want to find a configuration file not contained within the war file I have
          created. Is there a way to pass information into the ServletContext with out
          rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
          files. Does BEA have the equivalent?
          Regards,
          Eric


You can specify the path to the file as a system property
          eg
          java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
          "Eric White" <[email protected]> wrote in message
          news:[email protected]..
          >
          > What is the best way to find a file on the servers disk without using
          web.xml?
          > I want to find a configuration file not contained within the war file I
          have
          > created. Is there a way to pass information into the ServletContext with
          out
          > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
          configuration
          > files. Does BEA have the equivalent?
          >
          > Regards,
          > Eric

What is the best way to name a file?

What is the best way to name a file? Use "_" so that the characters make one, long name? Why do that?

Another take on naming files, particularly image files, is like this:
I use a file remaning application like Name Mangler to back, sequentially rename the photos. I put them in a folder with a similar name. Using the format I do, YYYY-MM-DD- Description-001.jpg, they are easy to sort by date by sorting alphanumerically.
OT

Best way to stream MP3 files with ColdFusion

I was looking for a kind of a built in player look in that
all the user has to do is click and it will start playing within
the browser. Some of the files are even 48MB long so if I can
reduce that too that would be good. client goes on conferences and
plan to record more conferences and we would like to host them on
the site.
Any Help?

Making pod casts:
http://www.podcastingnews.com/articles/How-to-Podcast.html
http://www.windowsdevcenter.com/pub/a/windows/2005/04/05/create_podcasts_with_pc.html
Flash players for MP3s:
http://wimpyplayer.com
Jukebox from
http://swishzone.com
--Nancy O.
"Brandon" <[email protected]> wrote
in message
news:et99hk$svu$[email protected]..
> I'm looking for recommendations about the best way to
publish mp3 files.
I
> have a client that is a church that wants their staff to
be able to upload
> mp3 files on a weekly basis from a web client and have
those files
> automatically be included in a podcast feed as well as
have a "play"
option
> and a "download" option. I know how to setup the front
end . . . any
> suggestions on the best way to implement this on the
back end (such as
> extensions or services)?
>
> --
> Brandon
>
http://www.presentationsdirect.com
>

Best way to handle source files

Hi there,
After some pretty general advise please.
The company I work for looks after a lot of websites, and one
of the
headaches we have is the best way to handle source files. By
source files I'm
referring to Photoshop files, Flash .fla files and also other
none Adobe
files that relate to a site, not the .html, .asp, .aspx,
.css, .js etc type
files.
Now I'm NOT after a version control system, just a simple way
to store the
source files in a location that is separate from the website
but still to be
able to have a smooth workflow between the Dreamweaver site
and it's source
files.
At the moment, and I know this is unwise, we have a
subdirectory within the
site where we store the source files, and use WebDAV to
transfer both site
and source files to and from the server. But I really want to
separate the
site from source but still maintain a link between site and
source...... if
you see what I mean. I think the upshot is I would like to be
able to open a
site within Dreamweaver and instantly be able to access that
sites source
files if needed. This method needs to be shared across a
small team spread
round the UK.
I looked at the Repository Subversion version control, but
like I said I'm
not after a source control system, plus it appeared to
conflict with WebDAV
and Contribute, that some of our clients use to maintain
content on their
sites. I also looked at Version Cue which looked promising,
but can't see a
clear workflow between Dreamweaver and Version Cue which
separates site from
source. I might be missing something.... part of my brain
perhaps. :)
Would be grateful for any advice please.
Cheers,
@ndyB

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

Best Way to Publish mp3 Files?

I'm looking for recommendations about the best way to publish
mp3 files. I
have a client that is a church that wants their staff to be
able to upload
mp3 files on a weekly basis from a web client and have those
files
automatically be included in a podcast feed as well as have a
"play" option
and a "download" option. I know how to setup the front end .
. . any
suggestions on the best way to implement this on the back end
(such as
extensions or services)?
Brandon
http://www.presentationsdirect.com

Making pod casts:
http://www.podcastingnews.com/articles/How-to-Podcast.html
http://www.windowsdevcenter.com/pub/a/windows/2005/04/05/create_podcasts_with_pc.html
Flash players for MP3s:
http://wimpyplayer.com
Jukebox from
http://swishzone.com
--Nancy O.
"Brandon" <[email protected]> wrote
in message
news:et99hk$svu$[email protected]..
> I'm looking for recommendations about the best way to
publish mp3 files.
I
> have a client that is a church that wants their staff to
be able to upload
> mp3 files on a weekly basis from a web client and have
those files
> automatically be included in a podcast feed as well as
have a "play"
option
> and a "download" option. I know how to setup the front
end . . . any
> suggestions on the best way to implement this on the
back end (such as
> extensions or services)?
>
> --
> Brandon
>
http://www.presentationsdirect.com
>

Best way to view Text files from Mac on iPhone 4?

What is the Best way to view Text files (loaded) from my Mac onto my iPhone 4?
Will any of the "readers" (e.g. Kindle, Kobo) allow me to put my own text files onto my iPhone and read them easily?
Thanks

I actually purchased GoodReader because it is easy to transfer files without iTunes. I dislike the file sharing through iTunes. You can use a Mac or PC. Once I was in the app I clicked the "Wi-Fi" symbol which brings me to "WiFi-transfer." It will show this --
"WiFi status: ON
Use one of the following addresses exactly as you see them
1. IP-address: http://192.168.0.98:8080 <-- Local LAN address the iPhone is broadcasting on.
2. Bonjour-address http://Myname-iPhone.local:8080"
All you have to do is type one of those addresses into your browser. (Safari, etc.)
It will take you to a page that has iPhone Connection and a list of options. You can either create a new directory within the application or use an existing one to upload a text file. It's rather simple, you just select "Choose a file to upload" > Select your file > Press upload > Start the app and see your text/pdf/whatever file.
You can also connect to a server to download a text file, browse the web, or enter a url. I see it also has an ICloud folder which I'm not sure if it integrates with Apple's iCloud or not, I think it does. I'm not affliated with the app and I'm not saying you have to buy it, I'm just a happy user.
If you don't want to buy this app let me know I'll keep looking for a free or cheaper one for you if you want.

Best way to enlarge raw files?...

Similar Messages

Maybe you are looking for