Best way to expand MacBook Air SSD

My daughter is a Medical Student with a 2013 MacBook Air 256 SSD.  I should have anticipated her video, (lecture), storage requirement.  Anyhow what is the best solution to expand her storage capabilities beyoun 256 gb and maintain some sense of portibility?  A high capacoty USB drive?

You would have to buy a third-party piece of hardware to do that. There is no other way to connect two monitors to a computer that has only one video out port.
You might check out www.matrox.com.

Similar Messages

  • What is the best way to partitioning Macbook Air 13" 2012 solid state drive

    What is the best way to partitioning Macbook Air 13" 2012 solid state drive.

    Tech,
    You don't provide enough information onto which anyone could reasonably formulate an answer.
    As mentioned, you don't indicate the circumstances that would warrant consideration of multiple partitions. Moreover, you also don't indoicate the size of the SSD in question.
    Like Fred said, ordinarily you leave it alone as one. Some people like to keep data and the OS/apps separate, but it is for specific reasons.

  • What is the best way to connect macbook air to present power point presentations

    What is the best way to connect macbook air to present power point presentations

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

  • Best way to clear MacBook Air?

    Hey,
    Having backed up my Macbook Air using an external hard drive and Time Machine - I just needed some guidance in what best to do now to clear up my laptop please.
    I've started to get a message that my 'start up disc is full' - now I have backed up my laptop what is the best way to completely clean up/delate everything so I can effectively start again from scratch? and also when time machine backs up, does it back up all the profiles on my computer too? I have a few family members who have accounts too on my computer..
    Thanks so much,
    Kerri x

    Hey,
    Having backed up my Macbook Air using an external hard drive and Time Machine - I just needed some guidance in what best to do now to clear up my laptop please.
    I've started to get a message that my 'start up disc is full' - now I have backed up my laptop what is the best way to completely clean up/delate everything so I can effectively start again from scratch? and also when time machine backs up, does it back up all the profiles on my computer too? I have a few family members who have accounts too on my computer..
    Thanks so much,
    Kerri x

  • Best way to completely erase my SSD disk and make fresh install of MacOSX?

    I want a brand new OSX installatetion. What is the best way to completely erase my SSD (to make it brand new) and reinstall MAC OSX (i can use internet WPA secure Wi-Fi to reinstall MACOSX Lion). On macbook air late 2011.

    That's a good question!  It's a trick question too!
    Here's my thoughts on this...
    It's not as obvious as one might think.  You certainly don't want to do a secure erase (heck, you never need to do a secure erase unless maybe you want to sell the machine).  And even a simple reformat is quationable.
    It's not that these things won't work.  It is just that the flash cells are not going to be reused unless there are no unused flash cells available.  So you end up installing in unused flash cells which is not the same as when it was actually new.
    So I don't know the answer here. 
    Note, I do recall the MacPerformanceGuild has some tool for reconditioning ssd's but I have to find it again and if I recall there was something that bothered me about its description.
    Time for some google searches.
    MPG Article on reconditing ssd's: Reconditioning a solid state drive (SSD)
    I think what was bothering me about that article was the info near the end about writing over the entire ssd.
    Another MPG Article: Restoring solid state drive performance with DiskTester ‘recondition’

  • Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

    Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

    Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
    In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
    iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
    There are other ways to share files but for those two applications this is the simplest way.
    Best of luck.

  • What is the best way to connect macbook running sling adapter to the tv

    what is the best way to connect macbook running slig adapter content to the tv

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

  • Macbook air ssd partition disappeared?

    Greetings. I am currently dealing with something a bit unusual. The partition where all the Mountain Lion OS was stored cant be detected in any way by my macbook air. I tried everything, trying to reselect as a startup disk, apple internet recovery, reseting NVRAMit just wont show up in the list of Disks in the Disk utility. All I get is the recovery partition which is Disk0 "MAC OS X Base System" which is 1.32GB or so. Please help as I start to get very upset, this is my work machine and I need it for an important presentation this weekend. It's a macbook air 13 mid 2012 8GB Ram 120GB SSD (I believe its the toshiba one). Thanks for reading!

    Probably you put an app in full-screen. Move the cursor to the top right and select the blue button, so the menu bar will show again

  • What is the best skin for new Macbook Air 13"?

    What is the best skin for new Macbook Air 13"?
    I have a new Air and want to protect it from scratches and such.
    Thanks in advance

    Sorry, I don't like "skins". They inhibit the heat transfer necessary to keep your MBA cool. Get a soft or hard case to store it when not in use. I like Speck products.
    Just take care of it. Battle scars make it uniquely yours.

  • Best way to charge macbook retina ?

    hey guys, what's the best way to charge macbook pro retina ? I know that it actually damages the battery to discharge it but how often should I leave it plugged into a/c ? I heard that if I leave it plugged in for too long, than it could also damage the battery.
    pretty much, I want to have my battery health stay at 100% for as long as possible

    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Battery University

  • My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

    My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

    If necessary,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Is there a way to prevent MacBook Air to go to sleep when using Spotify?

    I have a Macbook Air with the latest version of Maverics and I often listen to music on it, via airplay and headphones. This works great, but when I'm not using the computer for anything else but spotify it goes to sleep after the specified time and I loose the sound. I wonder whether there is  way to adjust the settings so that only certain programs like Spotify can prevent my Mac from going to sleep when they are active.
    Thanks a bunch!

    You can upgrade the SSD on a 2012 MacBook Air using the following: http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Air-2012-Drive-I nternal-Flash

  • Cannot erase Macbook Air SSD

    Hi,
    I'm having a Macbook Air with 128GB SSD and 4GB RAM with OS X Mavericks. I was using my Mac normally but suddenly chrome got stuck. So I held down the power button and shut down the Mac. When I switched my Mac on again, it wont start.
    I tried to repair my SSD using diskutility from Recovery Partition. But it says something is wrong with my Partition Map and that I have to erase and reinstall OS X. But I cannot erase my SSD. The progress bar gets stuck at 50%.
    When I used command line diskutil eraseDisk, it shows Waiting for disks to reappear and is stuck at 50%.
    Is it a problem with my SSD. If yes, will I be eligible for Warranty?

    Is this MBA functional?  Will it boot to an OSX?
    You may try OPTION+COMMAND+R which would install the original OSX.
    You could get an appropriate enclosure for the SSD and connect it to a working Mac and erase it that way.
    Ciao.

  • [MBP - 2008, 4,1] Best way to replace HDD with SSD

    Looking to upgrade my 2008 Macbook pro with a new SDD.
    What is the best way to install a SDD while still saving the data from my HDD?  I've heard it's possible to clone the hard drive, place the info on the SDD, and then boot with it.  I've tried my best googling it, but I can't seem to figure out how I would connect my SSD to my computer while the HDD is still installed?  I don't have an external drive with SATA connections. 
    If I do have to do a clean boot with the SDD (After saving important documents on an external drive), would I need my OSX disks?  It's been a long 4 years with this computer and don't think there is any chance of recovering the OSX boot disks.  Is there a way to download these necessary to do a clean boot?
    Thanks for helping a misguided student trying to speed up his laptop!

    You have two basic options. First is simply replace the HDD with the SSD. Second is to remove the optical drive, move the HDD to the space where the optical drive was (you need a mounting kit for this) and install the SSD where the HDD was installed.
    Visit OWC to see the various options they have that includes the special mounting kit, SSD, and installation tutorials.
    If you go with the first option then you will need an external notebook drive enclosure in which to put the HDD when you replace it with the SSD.
    As for cloning that is done as follows:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Be sure you prep the SSD properly:
    Drive Preparation
    1.  Boot from your old HDD. Open Disk Utility in your Utilities folder.
    2. After DU loads select your SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    I would also recommend upgrading your OS to Snow Leopard. You will need at least 1 GB of installed RAM for Snow Leopard.

  • ArchLinux Installation disk doesn't recognize Macbook Air SSD[SOLVED]

    I want to install ArchLinux on my new MacBook Air (dual boot), I made a dd of the installation iso to a usb disk. The usb disk can boot and run, but it cannot recognize the hard drive(SSD) of Macbook air.
    There are three disk files in dev: /dev/sda /dev/sda1 and /dev/sdb
    /dev/sda is the usb disk, /dev/sdb cannot be opened by parted and cannnot be mounted (it reports "no medium found") and I believe it is the sd card reader.
    What can I do?
    dmesg shows the following errors:
    ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: limiting SATA link speed to 1.5 Gbps
    ata1: COMRESET failed (errno=-16)
    ata1: reset failed, giving up
    and lots of
    applesmc: wait status failed: 5 != 0
    applesmc: failed to init the device
    this is  whole dmesg
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
    BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
    BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000006f000000 (usable)
    BIOS-e820: 000000006f000000 - 000000007f000000 (reserved)
    BIOS-e820: 000000007f000000 - 000000007f719000 (usable)
    BIOS-e820: 000000007f719000 - 000000007f939000 (ACPI NVS)
    BIOS-e820: 000000007f939000 - 000000007fef9000 (ACPI data)
    BIOS-e820: 000000007fef9000 - 000000007feff000 (reserved)
    BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI data)
    BIOS-e820: 0000000093200000 - 0000000093201000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.4 present.
    last_pfn = 0x7f719 max_arch_pfn = 0x100000
    MTRR default type: write-back
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-FFFFF uncachable
    MTRR variable ranges enabled:
    0 base 080000000 mask F80000000 uncachable
    1 base 07FF00000 mask FFFF00000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000008f000 (usable)
    modified: 000000000008f000 - 0000000000090000 (reserved)
    modified: 0000000000090000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000006f000000 (usable)
    modified: 000000006f000000 - 000000007f000000 (reserved)
    modified: 000000007f000000 - 000000007f719000 (usable)
    modified: 000000007f719000 - 000000007f939000 (ACPI NVS)
    modified: 000000007f939000 - 000000007fef9000 (ACPI data)
    modified: 000000007fef9000 - 000000007feff000 (reserved)
    modified: 000000007feff000 - 000000007ff00000 (ACPI data)
    modified: 0000000093200000 - 0000000093201000 (reserved)
    modified: 00000000f0000000 - 00000000f4000000 (reserved)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ffc00000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 6e7e5000 - 6efde026
    Allocated new RAMDISK: 00100000 - 008f9026
    Move RAMDISK from 000000006e7e5000 - 000000006efde025 to 00100000 - 008f9025
    ACPI: RSDP 000fe020 00024 (v02 APPLE )
    ACPI: XSDT 7f96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
    ACPI: FACP 7f968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
    ACPI: DSDT 7f95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
    ACPI: FACS 7f71e000 00040
    ACPI: HPET 7f967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: APIC 7f966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: APIC 7f965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: ASF! 7f963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SBST 7f962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: ECDT 7f961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SSDT 7f957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
    ACPI: SSDT 7f956000 000FC (v01 APPLE SDCard 00001000 INTL 20061109)
    ACPI: SSDT 7f954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
    ACPI: MCFG 7f964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    ACPI: SSDT 7f95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
    ACPI: SSDT 7f959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    1151MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00016000 - 0001cf00
    (10 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
    #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
    #4 [0001551000 - 00015571d5] BRK ==> [0001551000 - 00015571d5]
    #5 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
    #6 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
    #7 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
    #8 [0000100000 - 00008f9026] NEW RAMDISK ==> [0000100000 - 00008f9026]
    #9 [0000016000 - 000001d000] BOOTMAP ==> [0000016000 - 000001d000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007f719
    Movable zone start PFN for each node
    early_node_map[5] active PFN ranges
    0: 0x00000000 -> 0x00000002
    0: 0x00000010 -> 0x0000008f
    0: 0x00000090 -> 0x0000009f
    0: 0x00000100 -> 0x0006f000
    0: 0x0007f000 -> 0x0007f719
    On node 0 totalpages: 456361
    free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2303 pages used for memmap
    HighMem zone: 226844 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000008f000 - 0000000000090000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 93201000 (gap: 93201000:5cdff000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34776 r0 d22568 u2097152
    pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 452282
    Kernel command line: initrd=/boot/i686/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/i686/vmlinuz26
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    allocated 10440180 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Initializing HighMem for node 0 (000377fe:0007f719)
    Memory: 1783248k/2088036k available (2895k kernel code, 41140k reserved, 1208k data, 408k init, 916588k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1403000 - 0xc1469000 ( 408 kB)
    .data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
    .text : 0xc1000000 - 0xc12d3f1e (2895 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1858.186 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3717.22 BogoMIPS (lpj=6193953)
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    Performance Events: Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20091214
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    Brought up 2 CPUs
    Total of 2 processors activated (7435.67 BogoMIPS).
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
    PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
    pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
    pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
    pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
    pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.4: reg 10: [mem 0x93200000-0x9327ffff]
    pci 0000:00:04.0: reg 10: [mem 0x9328a000-0x9328afff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10: [mem 0x9328b100-0x9328b1ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: reg 10: [mem 0x93289000-0x93289fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: reg 10: [mem 0x9328b000-0x9328b0ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: reg 10: [mem 0x93280000-0x93283fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
    pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
    pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
    pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
    pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
    pci 0000:00:0a.0: reg 24: [mem 0x93284000-0x93285fff]
    pci 0000:00:0b.0: reg 10: [mem 0x93288000-0x93288fff]
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:01:00.0: reg 10: [mem 0x93100000-0x93103fff 64bit]
    pci 0000:01:00.0: supports D1 D2
    pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:01:00.0: PME# disabled
    pci 0000:00:15.0: PCI bridge to [bus 01-01]
    pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
    pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92ffffff]
    pci 0000:02:00.0: reg 14: [mem 0x80000000-0x8fffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0x90000000-0x91ffffff 64bit pref]
    pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
    pci 0000:02:00.0: reg 30: [mem 0x93000000-0x9301ffff pref]
    pci 0000:00:17.0: PCI bridge to [bus 02-02]
    pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
    pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
    pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
    pnp: PnP ACPI: found 8 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:06: [io 0x0400-0x047f] has been reserved
    system 00:06: [io 0x0480-0x04ff] has been reserved
    system 00:06: [io 0x0500-0x057f] has been reserved
    system 00:06: [io 0x0580-0x05ff] has been reserved
    system 00:06: [io 0x0800-0x087f] has been reserved
    system 00:06: [io 0x0880-0x08ff] has been reserved
    system 00:06: [io 0x04d0-0x04d1] has been reserved
    system 00:06: [io 0x0295-0x0296] has been reserved
    pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
    pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
    pci 0000:00:15.0: PCI bridge to [bus 01-01]
    pci 0000:00:15.0: bridge window [io disabled]
    pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
    pci 0000:00:15.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 02-02]
    pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
    pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
    pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
    pci 0000:00:15.0: power state changed by ACPI to D0
    pci 0000:00:15.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
    pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:15.0: setting latency timer to 64
    pci 0000:00:17.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
    pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
    pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:02:00.0: Boot video device
    PCI: CLS 256 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 8164k freed
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1292314287.046:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1710
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:15.0: setting latency timer to 64
    pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
    ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:04.1: debug port 1
    SCSI subsystem initialized
    ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0x9328b100
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
    ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0x9328b000
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
    ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0x9328a000
    libata version 3.00 loaded.
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
    pata_acpi 0000:00:0a.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
    pata_acpi 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
    pata_acpi 0000:00:0a.0: setting latency timer to 64
    pata_acpi 0000:00:0a.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
    ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 18, io mem 0x93289000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    ahci 0000:00:0a.0: version 3.0
    ahci 0000:00:0a.0: power state changed by ACPI to D0
    ahci 0000:00:0a.0: power state changed by ACPI to D0
    ahci 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:0a.0: irq 25 for MSI/MSI-X
    ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl IDE mode
    ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
    ahci 0000:00:0a.0: setting latency timer to 64
    scsi0 : ahci
    ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    Initializing USB Mass Storage driver...
    scsi1 : usb-storage 1-1:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb 1-6: new high speed USB device using ehci_hcd and address 5
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    scsi2 : usb-storage 2-1:1.0
    usb 2-2: new high speed USB device using ehci_hcd and address 3
    usb 3-3: new full speed USB device using ohci_hcd and address 2
    usbcore: registered new interface driver hiddev
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input1
    generic-usb 0003:05AC:023F.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
    generic-usb 0003:05AC:023F.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
    input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input2
    generic-usb 0003:05AC:023F.0003: input,hidraw2: USB HID v1.11 Mouse [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    usb 3-5: new full speed USB device using ohci_hcd and address 3
    hub 3-5:1.0: USB hub found
    hub 3-5:1.0: 3 ports detected
    usb 3-5.1: new full speed USB device using ohci_hcd and address 4
    input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input3
    generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
    usb 3-5.2: new full speed USB device using ohci_hcd and address 5
    input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input4
    generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
    usb 3-5.3: new full speed USB device using ohci_hcd and address 6
    scsi 1:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
    ata1: link is slow to respond, please be patient (ready=0)
    scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
    sd 1:0:0:0: [sda] 3905536 512-byte logical blocks: (1.99 GB/1.86 GiB)
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sd 1:0:0:0: [sda] Attached SCSI removable disk
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: link is slow to respond, please be patient (ready=0)
    ata1: COMRESET failed (errno=-16)
    ata1: limiting SATA link speed to 1.5 Gbps
    ata1: COMRESET failed (errno=-16)
    ata1: reset failed, giving up
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    eth0: register 'asix' at usb-0000:00:06.1-2, ASIX AX88772 USB 2.0 Ethernet, 58:55:ca:24:b3:52
    usbcore: registered new interface driver asix
    UDF-fs: Partition marked readonly; forcing readonly mount
    aufs 2-standalone.tree-33-20100426
    loop: module loaded
    squashfs: version 4.0 (2009/01/31) Phillip Lougher
    aufs test_add:248:mount[967]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
    aufs test_add:248:mount[972]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
    udev: starting version 151
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
    ACPI: Power Button [PWRF]
    ACPI: SSDT 7f71dc98 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    ACPI: SSDT 7f71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    Monitor-Mwait will be used to enter C-1 state
    applesmc: Apple MacBook Air detected:
    applesmc: - Model with accelerometer
    applesmc: - Model with light sensors and backlight
    applesmc: - Model with 15 temperature sensors
    Monitor-Mwait will be used to enter C-2 state
    Linux video capture interface: v2.00
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: SSDT 7f71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    ACPI: SSDT 7f71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    ACPI: AC Adapter [ADP1] (on-line)
    Switching to clocksource hpet
    uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
    input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    ACPI: Battery Slot [BAT0] (battery present)
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input11
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    applesmc: wait status failed: 5 != 0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    applesmc: failed to init the device
    applesmc: 1 fans found.
    applesmc: wait status failed: 5 != 0
    applesmc: wait status failed: 5 != 0
    input: applesmc as /devices/platform/applesmc.768/input/input12
    Registered led device: smc::kbd_backlight
    applesmc: driver successfully loaded.
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    this is lspci -vvv output
    00:00.0 Host bridge: nVidia Corporation Device 0d60 (rev a1)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    00:00.1 RAM memory: nVidia Corporation Device 0d68 (rev a1)
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    00:01.0 RAM memory: nVidia Corporation Device 0d6d (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.1 RAM memory: nVidia Corporation Device 0d6e (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.2 RAM memory: nVidia Corporation Device 0d6f (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:01.3 RAM memory: nVidia Corporation Device 0d70 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:02.0 RAM memory: nVidia Corporation Device 0d71 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:02.1 RAM memory: nVidia Corporation Device 0d72 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.0 ISA bridge: nVidia Corporation Device 0d80 (rev a2)
    Subsystem: Apple Computer Inc. Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: I/O ports at 2100 [size=256]
    00:03.1 RAM memory: nVidia Corporation Device 0d7b (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.2 SMBus: nVidia Corporation Device 0d79 (rev a1)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 2000 [size=256]
    Region 4: I/O ports at 2240 [size=64]
    Region 5: I/O ports at 2200 [size=64]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    00:03.3 RAM memory: nVidia Corporation Device 0d69 (rev a1)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    00:03.4 Co-processor: nVidia Corporation Device 0d7a (rev a1)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 14
    Region 0: Memory at 93200000 (32-bit, non-prefetchable) [size=512K]
    00:04.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at 9328a000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ohci_hcd
    00:04.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 22
    Region 0: Memory at 9328b100 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=00a0
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ehci_hcd
    00:06.0 USB Controller: nVidia Corporation Device 0d9c (rev a1) (prog-if 10 [OHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 18
    Region 0: Memory at 93289000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ohci_hcd
    00:06.1 USB Controller: nVidia Corporation Device 0d9d (rev a2) (prog-if 20 [EHCI])
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin B routed to IRQ 21
    Region 0: Memory at 9328b000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=00a0
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
    Kernel driver in use: ehci_hcd
    00:08.0 Audio device: nVidia Corporation Device 0d94 (rev a2)
    Subsystem: nVidia Corporation Device cb89
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (500ns min, 1250ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at 93280000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Address: 0000000000000000 Data: 0000
    Masking: 00000000 Pending: 00000000
    Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
    Kernel driver in use: HDA Intel
    00:0a.0 IDE interface: nVidia Corporation Device 0d85 (rev a2) (prog-if 85 [Master SecO PriO])
    Subsystem: Apple Computer Inc. Device cb89
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (750ns min, 250ns max)
    Interrupt: pin A routed to IRQ 25
    Region 0: I/O ports at 2298 [size=8]
    Region 1: I/O ports at 22a4 [size=4]
    Region 2: I/O ports at 2290 [size=8]
    Region 3: I/O ports at 22a0 [size=4]
    Region 4: I/O ports at 2280 [size=16]
    Region 5: Memory at 93284000 (32-bit, non-prefetchable) [size=8K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [8c] SATA HBA v1.0 InCfgSpace
    Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
    Address: 00000000fee0300c Data: 4181
    Kernel driver in use: ahci
    00:0b.0 RAM memory: nVidia Corporation Device 0d75 (rev a1)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0 (250ns min, 5000ns max)
    Interrupt: pin A routed to IRQ 0
    Region 0: Memory at 93288000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
    Address: 0000000000000000 Data: 0000
    Masking: 00000000 Pending: 00000000
    00:15.0 PCI bridge: nVidia Corporation Device 0d9b (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: 93100000-931fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device 0000
    Capabilities: [48] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Address: 00000000fee0300c Data: 4151
    Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
    Mapping Address Base: 00000000fee00000
    Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag+ RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
    ClockPM- Surprise- LLActRep+ BwNot+
    LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
    SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
    Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
    SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
    Control: AttnInd Off, PwrInd On, Power- Interlock-
    SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
    Changed: MRL- PresDet- LinkState+
    RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
    RootCap: CRSVisible-
    RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Kernel driver in use: pcieport
    00:17.0 PCI bridge: nVidia Corporation Device 0d76 (rev a1) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: 92000000-930fffff
    Prefetchable memory behind bridge: 0000000080000000-0000000091ffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Subsystem: nVidia Corporation Device 0000
    Capabilities: [48] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    01:00.0 Network controller: Broadcom Corporation Device 4353 (rev 01)
    Subsystem: Apple Computer Inc. Device 00d1
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 14
    Region 0: Memory at 93100000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
    Capabilities: [58] Vendor Specific Information: Len=78 <?>
    Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [d0] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
    ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
    ClockPM+ Surprise- LLActRep+ BwNot-
    LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
    ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Advanced Error Reporting
    UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
    UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
    CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
    AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
    Capabilities: [13c v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
    Status: NegoPending- InProgress-
    Capabilities: [160 v1] Device Serial Number 1c-11-ca-ff-ff-f5-58-55
    Capabilities: [16c v1] Power Budgeting <?>
    02:00.0 VGA compatible controller: nVidia Corporation Device 08a3 (rev a2) (prog-if 00 [VGA controller])
    Subsystem: Apple Computer Inc. Device 00d3
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 256 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at 92000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at 80000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at 90000000 (64-bit, prefetchable) [size=32M]
    Region 5: I/O ports at 1000 [size=128]
    Expansion ROM at 93000000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 3
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [e0] Vendor Specific Information: Len=14 <?>
    Last edited by steamedfish (2010-12-14 18:13:28)

    Try booting the fallback kernel, there is a problem with the AHCI driver concerning new Macbooks. When you've booted, add ata_generic to the modules in /etc/mkinitcpio.conf and rebuild the initrd with mkinitcpio -p kernel26.

Maybe you are looking for