Best way to export for flickr

Any suggestions on exporting a 1 minute, 20 second video to flickr for the best quality?

VisualHub will ignore quality and blindly cram as much footage as it is given onto a DVD image.
Even so 10hrs on a DVD5 is ambitious. (3 discs would be the minimum or 2 DVD9 is my best guess)
Failing that you are looking at compressing it to MPEG-4 using one of the presets (up to you to decide how small is acceptable) and going the laptop route.
The best time to leave this running is overnight . . do not expect to see a fast result for what you are asking to do.

Similar Messages

What is the best way to export for use on internet?

what is the best way to export for use on internet?

It depends. Is this for a personal web site or for a site like YouTube, Vimeo or Facebook?
For YouTube, Vimeo and Facebook, use Publish & Share/Computer/AVCHD using one of the YouTube presets.

InDesign / Best way to export for Web?

Hi guys,
I did an A2 (large size) poster and now i need to have the very same image for Web Mailing on Internet. I guess it will be a 650 pixeles by 800 px.
Which is the best way to export this content for Internet?
1) I notice that if i save the InDesign file to PDF even in the lowest quality the small text keeps crisp and clear while the file is very small size. Unfortunately PDF cannot be used -i think- as embedded images into a mailing list.
2) If i export the very same InDesign file at the highest posible resolution as JPG -a traditional Internet image standard- the text is blurred and not well defined, besides the file is quite large.
3) Should i exported to PDF and then open in Photoshop and "Save for the Web" as JPG? Maybe Photoshop has a better exporting engine when regarding to images than InDesign...i don't know.
How can i find a way to have well defined crisp and clear text, small size and image? I am not sure i could use PDF format here.
Any help or ideas? that would be great
Thanks,
S

Thanks for the tip!
I am sorry i forgot to say i have an A2 and an A3 size poster version. I used the A3 poster and the 650 pixeles poster for Internet actually turn out to be quite readable. I used quite large fonts size in the original design, a bit of a Swiss or Constructivism style poster.
Cheers

What's the best way to export for print?

I usually upload images to my local photoprinting shop. What's the best way to do that with Lightroom? Since lightroom does the final sharpening in the print module, how do I get that into the exported file since there is no export function in the print module? Also, how do I get the proper dpi and sizing info into the photo for the print shop? Thanks.

There is no good way to prepare images for printing from a file from a commercial printer by using Lightroom alone. You need to do an export of the image without any resizing or color space conversion, and then use some other program of your choice to 'finish' the file.
It's just plain missing functionality... Lightroom assumes that you will be printing photos yourself and it is missing a whole lot of stuff in order to support external printing, including:
a) Resize to exact pixel dimensions. Many labs require an exact pixel count for a given print size, so for example for an 8x10 they need a 2400 x 3000 pixel image. Can't be done in Lightroom.
b) Trim adjustment. If you are doing full bleed photos (no margin), you might need to provide about 0.05 inch of 'trim space' to compensate for image loss during printing. Can't be done in Lightroom.
c) Exporting to a specific printer profile. Can't be done.
d) Adding margins, text, etc. Many times my clients want a 1/4 inch margin in their photos to facilitate framing, or I put a dim watermark type text in the bottom corner. Can't be done.
My solution. Do most processing in Lightroom, do an export, and then do a second export via qImage on a PC. It does all of the above plus much more. It's just a matter of using the right tool for the job, and LIghtroom has no facilities at all for printing to a file.
I have been asking for "Print to File" ever since I was under NDA during the betas.

Best way to export for DVD

Hi Guys
Right, I am exporting to DVD and i want to know the best way to do this at the highest quality, but also, so the DVD will play on most players.
I am shooting in HDV 1080i 60, importing to Final Cut Pro 5.1.4 (the older final cut pro) using the apple intermediate codec.
I want to make the best quality SD dvd. The content is rarely over 5 minute's (kids music videos) but i am preparing a 50 minute show which needs to be put on DVD.
I usually use; export to quicktime movie, with the setting dv pal 48 khz anamorphic, i use DVD studio pro also to make the DVD, but not sure what the best settings are.
PLEASE HELP.

The BEST export method I have found by comparing them all is by exporting using Compressor and the DVD Best Quality setting. Now this setting gives you a few different options for length of your project: 120 minutes, 150 minutes, or 90 minutes. And then with each of these length options comes the option of 4:3 or 16:9. So if your project is 50 minutes, select the DVD: Best Quality 90 minutes option, either 4:3 or 16:9 depending what your project is. After laying your cursor over this option it will open up a list of audio options. What I do is just select the "All" option, which then lists all 3 audio options in your batch window: AIFF, Dolby 2.0, and MPEG-2. What I then do is just delete the MPEG and Dolby options, leaving the AIFF. After waiting for it to compress (make sure you specify a destination for the files so you can find them) it will give you 2 files, an MPEG-2 file which is the movie file, and an AIFF file (looks like an itunes file) that is the audio file. At this point, open up DVD Studio Pro and drag these 2 files into the assets window, and you're good to go from there. Hope this helped.
-JP

Best Way of Exporting for iDVD when using FCP?

What would anyone recommend in terms of getting the best output from FCP for making an iDVD?
I usually export as a self-contained QT movie. Is there a better way?
J.M. Prater

There's an easier way... export a non self contained movie. The result will be the same... just faster file export and smaller file to boot.
DVD SP will make a lot better looking DVD's if you have that. The encoding done through Compressor is better than what can be done in iDVD.
Jerry

Best way to export for hours of footage

hi I have more then 10 hours of rushes of rehearsals from a music gig and the client wants to view all the rushes and choose the best bits for a short promotional video, what would be best way to get these on a dvd disc?
I would prefer the footage to play on a normal dvd player but failing that pc laptop.
I am familiar with compressor and dvd studio pro but dont want to make dozens of discs which will take many days to create, quality or picture size isnt important at all, but my time for doing it is,
any one got any tips on what format, compression setting I can use to get as much as possible onto few discs.
many thanks

VisualHub will ignore quality and blindly cram as much footage as it is given onto a DVD image.
Even so 10hrs on a DVD5 is ambitious. (3 discs would be the minimum or 2 DVD9 is my best guess)
Failing that you are looking at compressing it to MPEG-4 using one of the presets (up to you to decide how small is acceptable) and going the laptop route.
The best time to leave this running is overnight . . do not expect to see a fast result for what you are asking to do.

Best way to export for archive, DVD

Hi,
I'd like to export and "archive" my sequences, audio slide shows, (in anticipation of moving on to FCP X or whatever appears right in the next few months...) and have seen on this forum that i'm best using Quicktime, not QT conversion. For my internet movie I used QT Conversion (H264>29.97fps> auto keyframe> 5000 ktbist/sec>1280x720>scale letter box // Audio: AAC 44.100 kHz> 320 kbps. Vimeo took over from there, and it came out fine.) Seems like QT doesn't ask for me to make all those choices. So do I just hit the button -- then use iDVD if I want to place on a DVD? Yes, I'm a newbie, so give me some steps here...
Thanks.
Mary

Thanks..I guess it will be apparent when I go in there. Sounds like no major decisions to make.

Best way to export for youtube please

i exported at dv pal and quicktime both seem horrible when on youtube
any suggestions
and yeah i know you tube compress it as well

also found this:
youtube recommends optimum is:
MPEG4 (Divx, Xvid) format
MP3 audio
Video resolution: 480x360 or higher
Frame Rate: 24fps (frames per second) or higher
found it here:
http://help.youtube.com/group/youtube-howto/browse_thread/thread/de22448d715bb8d d/5e3dbc05ff57140a?lnk=gst&q=fileformat+frame+rateresolution#5e3dbc05ff57140a

Best way to export configurations? FIM 2010

I can export for example management agents, but what is the best way to export for example sync rules or workflows?
Am I somehow able to export configurations to xml? Also what is the best way to export configutarions if I want to attach those to a word report?

Hello,
Yes, you can export Sync rule and Workflow into xml, with the powershell snap-in.
You will need to use
Export-FIMConfig and then ConvertFrom-FIMResource.
You can find some usefull scripts
here
Regards,
Sylvain

Best way to export data for a migration

Hi Oracle Community,
What's the best way to export data from an Oracle 8i database for it to be suitable for import into an Oracle 10g database?
What's the best way to export data if it is to go into different rdbms database?
Thanks, David

Thanks everyone for all your help. You guys are great.
There seems to be many good ways to export your data from Oracle into a flat file format, suitable for import into other RDBS': Oracle, mysql, postgresql, etc.
A few tools where mentioned but using SQL*Plus, which comes with Oracle (And SQL*LDR on the backend, which also comes with Oracle) seem the most straight forward.
I found this script on asktom.oracle.com to work great, slightly modified here,
(to Include linesize max, and pipes rather than commas):
set echo off newpage 0 space 0 pagesize 0 feed off head off trimspool on
set linesize 32767
spool payment.txt
select
PAYMENT_ID||'|'||
USER_ID||'|'||
<more fields her>
from
payment
spool off
exit ;
It works great. Rather than making one of these for each table I wrote an perl script called ora_export. http://crowfly.net/oracle/ora_export. It runs in Unix and only requires SQL*PLUS. It creates these four files:
<tablename>.def # list of table columns and types (SQL*Plus DESC)
<tablename>_dump.sql # a script to export the data
<tablename>.psv # THE DATA (eq. - name|address|etc)
<tablename>_load.ctl # SQL*LDR control for ORCL if you need it.

I need advice (for the best way to exporting uncompressed files)

Using Final Cut Pro to animation(2D) project(30fps), I've experienced a problem exporting uncompressed TGA image sequence files.
Here's the workflow I use:
File> Export> QT Conversion> Image Sequence> Options> TGA, uncompressed 8bit, millions of color, 30 fps> OK
After exporting a files, I supposed to get 1MB each(file size), but I got less than 1MB each(file size). It tells us that those are compressed files. The size of files is random. when I use Avid Nitris there is no problem but it is different with the Final Cut Pro.
Do you know what is the best way to exporting uncompressed TGA image sequence files out of FCP? (for Best Quality Output)
Thank you in advance.
Jasmine

Patrick,
I'm sorry it has taken me so long to reply you. I can't post your request, because Avid is not here. So I will post another example, and I have another question. This is the nearset approach to problem. See below images.
I use QuickTime 7.1 and Final Cut Pro 5.1.1 in the PowerMac G5 2.0 Ghz.
1. File > Export > QT Converstion > Image Sequence > Options > TGA, 30, Best Depth
I supposed to get 1MB each, but I got less than 1MB each. It tells us that those are compressed files, and shows up low quality images. (besides, The size of files is random.)
2. File > Export > QT Converstion > Image Sequence > Options > TIFF, 30, Best Depth (Compression: None)
Finally, I was a great success See the files size: all 1MB each. I can get the result that I want/___sbsstatic___/migration-images/migration-img-not-avail.png
OK, now question, I will tell you.
Why have a different result? (TGA vs TIFF)
'TIFF options' have a compression option, but 'TGA options' haven't it. So 'TGA image sequence' can't make uncompressed files. For what reason? Do you know any particular reason?
: TGA Options haven't compression option.
: TIFF Options have a compression option.
What's the 'Little Endian'? I don't know this option: Little Endian.
Could you explain that for me, please? Lay it all out for me, please..
Thank you for your kindness,
Jasmine

What is the best way of exporting artboards from Illustrator for use in InDesign?

Hi,
I have an artboard in Illustrator CS6 which contains some text with a scribble effect applied to it. I would like to use this text in an InDesign CS6 document. I am wondering what the best way of exporting/importing this artboard would be so that I get the best quality.
Thanks,
Nick

Save as an AI file with PDF compatibility enabled and the Document Raster Effects set to "High"; then use File>Place in ID.

What could be the best way to Export data from 11.5.8 instance to 12.1.2?

Hi All
What could be the best way to Export data from 11.5.8 instance to 12.1.2?
Release: 11.5.8
OS: Oracle Solaris on SPARC (32-bit) verison 9
DB: 9.2.0.1
Thanks in advance

What kind of data you are looking to move?
Database export/import is only supported for full database export/import and the application release should be the same on the source/target nodes.
You can move the setup using iSetup or FNDLOAD.
Thanks,
Hussein

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Best way to export for flickr

Similar Messages

Maybe you are looking for