Best way to export timeline footage to Toast 10 (blu ray)

I have a 2hr production that has been shot on a Panasonic HMC150 AVCHD cam, L/T into FCP as Prorez LT and I would like to export this into Toast and burn a Blu Ray disc for my client. Is the best method to use Quicktime conversion to H264 or export as a Quicktime movie using current settings (prorez LT). My end destination is Toast 10.
Any help would be great ..........

Export current settings/self contained/video and audio/no recompression.
Don't do QT conversion.
Set your preferences for encoding in Toast, and use that self contained file.
Be prepared for a long encode.

Similar Messages

  • Best format to export to Encore for a Blu-Ray disc ?

    To All
    My question is I shoot with a Canon Vixia HFR21. I am putting together a family vacation we all just had at Disney World. My computer is capable of handling everything very well.I had it built 2 years ago by ADK.I need to know once I have everything set on timeline and all is ready to export, what exact setting in Media Encoder would be best considering I will be bringing it then into Encore to burn on Blu ray disc.
    I have Adobe cs6 Premiere and Encore.
    Also after I make the Blu ray I will put exact same time line on regular dvd..from what I read for that I think I should export to mpeg-2 ..I'm not sure .
    Also for both blue ray and dvd, which is better ipcm or dolby digital audio ?
    Thanks a lot,
    Ray Perry

    Hi Ray,
    From Premiere, export via AME and choose the "H.264 Blu-ray" format, and then for preset, get what best matches your footage, for instance maybe 1080i 29.97
    You will need to choose a bitrate in line with the length of the program so that you don't exceed the disc capacity. Just search the web for "bitrate calculator" and plug in your details. No need to be in the 30-40 range, something like 25 using H.264 will look fantastic. I believe at "20" you can fit well over 2 hours on a Blu-ray disc. Dolby audio is the default.
    For DVD, again Export via AME but choose "MPEG-2 DVD" and proper preset like "NTSC Widescreen", and set bit rate. Don't exceed 7 or 8 on that, and you can use 560/minutes=rate as a rule of thumb and round down slightly. For instance 560/120=4.66 so I encode at 4.5, again using default Dolby Audio.
    I'm not keen on sharing the same Encore project for the Blu-ray and DVD, but that's up to you. Note that you can add DVD chapter marks in your Premiere timeline and when you export, those go with. In Encore, use "Import As > Timeline" and grab the audio and video clip at the same time and the chapter marks come along for the ride!
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Best codec to Export AVCHD for Storage on Blu-ray

    I'm just beginning to edit with Premiere Pro CS5 and I'm working with AVCHD footage natively for the first time (previously used FCP).  I just shot a wedding and the client would like the Raw Footage that I shot.  Normally I would just copy the AVCHD folders onto blu-ray discs and burn them as data discs with no issue.  However, the Ceremony lasted longer than anticipated, so I have three 32GB cards that were filled up to about 26 GB (with only one clip on each camera as they just rolled the whole time.  I actually have about an hour on each card that's worthless because the ceremony started an hour late since I did not have another Camera Op to go to the balcony to turn them off and back on.)
    Instead of having to buy 50GB blu-ray discs (which I believe are a good bit more expensive than the 25GB discs I have), I would like to bring the AVCHD files into Premiere Pro, edit out the worthless hour of footage, then export it to a format that I can give to them on 25GB Blu-ray Discs.  I have not figured out if I can export AVCHD footage and create new AVCHD files.  I'm guessing that is not possible, and if it is not, what would be a recommended format to export to?
    Basically I just need something that will be less than double the AVCHD file size and is an editable format that the client could potentially use again for editing if they want.  My first thought was ProRes but I know that will be way too large.  I've not worked with XDCAM, so I'm wondering if there is a type of XDCAM that might fit my situation?  I'm open to any and all suggestions!
    Thanks,
    Mike

    If it were me, I'd just give 'em what I have.  At some point, I know I'd be using the 50 GB disks anyway, so having a stash lying around is not a bad thing.

  • Best way to Export HD footage for SD DVD

    Hi all,
    I have a Sony HDV-HC7 camera and record everything in HD. I've captured the footage into final cut pro as HDV - 1080i60, then did some editing on the time line. Then, I went to File + Export + QuickTime Movie... This is where I'm lost. What should my Setting drop down be if I want to import to DVD Studio Pro and burn to SD DVD.
    Thanks in advance.
    mdawg

    Or....
    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it amd select the top option "first play".
    5. Now drag your QT from the broswer and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.
    Shane

  • Question: Best way to export HD footage to 'KEY' in After Effects (AVC-HD)

    So I have 15 mins of footage in premiere that i'm going to edit down to about 2 mins. This will then need to be keyed out (green screen) so I figure I need to bring it all into AE and use the KeyLight plugin. Should I export the whole project or use the  'replace with after effect composition' by 'right-clicking' on each clip?
    If i export the project (using adobe media encoder) what is a good format to export to because AVCHD is not an option.

    Should I .....use the  'replace with after effect composition' by 'right-clicking' on each clip?
    That's what I would do.
    If i export the project (using adobe media encoder) what is a good format to export to because AVCHD is not an option.
    Something lossless like:
    Lagarith Lossless Video Codec
    http://lags.leetcode.net/codec.html
    or
    Ut Video Codec Suite
    http://www.videohelp.com/tools/Ut-Video-Codec-Suite

  • Best way to export from AVCHD to highest quality possible

    Hello,
    I just got the Canon HF200, a AVCHD Camcorder and new to Premiere Pro CS4.
    Does anyone have the time and is willing to explain what would be the best way to export AVCHD source material after editing ?
    I'm interested in the best quality you can get out of AVCHD.
    It would be nice to have a list of the settings in Premiere to be customized (i.e. setting up new project, exporting format settings and so on) to have the best quality of the footage exported.
    Thanks in advance
    best regards
    checop

    Geezus the guy just wants a simple answer.
    MASTER FILE / FOR YOUR BLU RAY PLAYER / ARCHIVAL
    1) use the Bluray H.264 preset to get a Bluray master. Best quality, takes a while to encode though.
    Unless it's a five hour movie I'm pretty sure it'll fit on a BD disc.
    GENERAL RULE OF THUMB FOR ARCHIVAL AND MASTER FILES: try to match the final product with your source file.
    If your source is H.264/AVCHD export in that format too (In this case, Bluray H264 preset)
    If it's 1080i then export as such
    If it's 24Mbps then use that bitrate to export as too. Etc. etc. etc.
    Now that's for archiving - getting the best looking Master file. Uploading  your movie to the web is different...
    IF YOU'RE GOING TO SHOW YOUR MOVIE ON THE WEB
    1) use that Bluray master (or encode directly from your CS 4 timeline if you have the time) to WMV.
    Choose the NTSC setting and then customize it.
    640 x 360 or 575 x 324 sizes are good; Make sure to use the SQUARE pixels option since the sizes here are figured for that. Keyframes every 2 seconds, or every 5 seconds if there's not a lot of movement and background business going on. In the 1000 - 1600 kbps range is good (larger dimensions = higher bitrate).
    Audio 96/44 is fine.
    Choose 2 Pass Variable Bitrate for best quality/size ratio.
    If you're using CS4 it'll automatically deinterlace when you encode to WMV. In other programs you need to check "Deinterlace".
    2) Flash (FLV) is popular too. Same sizes, you can get away with lower bitrates than WMV. Requires special players either on the web or on the users' desktop so only do this if you feature the movie on your site and you know how to make a SWF file with your FLV embedded.
    Lost me here? Then just forget Flash for now.
    Other Primer Notes (VERY GENERALIZED SPEAKING):
    Forget MPEG 1. Bad quality/size ratio compared to WMV.
    Use MPEG 2 for archival purposes, but use high bitrates (like 1920 x 1080 @ 24 Mbps or similar. )
    Quicktime is good for archiving too but takes a long time to encode on PCs. Not worth it for web delivery anymore... although there will be Mac fanatics disagreeing with me right now.
    Hope this helps
    For more info hit me up http://www.kroycom.com

  • Best Settings for Exporting DVD Footage in a Movie File

    Hello,
    I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
    I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
    Here's an example of what I did recently with my own settings:
    http://www.youtube.com/watch?v=qFV4sT7rHGs
    I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
    So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
    Thanks!

    First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
    Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

  • What is the best way to export a movie to avoid losing quality?

    I need to get a movie I made on a DVD somehow, but I seem to loose quality in color and overall sharpness when I take it into iDVD and burn a disc. This movie will be projected very large, so I need the best quality possible. What is the best way to export it for the highest quality?

    There's been a ton of testing reported here on this issue, but I don't think there is a consensus on the "best" method. For one thing, it depends on what you're starting with.
    In my experience with DV video and hi-res photos, it was tough to beat the result I got exporting "large" to the media browser. (Because of my DV footage, HD was not an option.) This made a H.264 file. I could only get a slight improvement by exporting via Quicktime to a H.264 file at double the resolution of the "large" file made by iMovie. Of course this took longer to export and for iDVD to encode. Overall, I'd say it wasn't worth it for the barely visible improvement. That improvement was only detectable in the slides, BTW, not in the DV video.
    Many recommend exporting to AIC, which should be an essentially lossless export out of iMovie. This is what the share to iDVD supposedly does, I got poor results with any flow that used an AIC file exported out of iMovie for use by iDVD. Never figured out why, but my results were always better if I compressed to H.264 on the way out of iMovie.

  • Best Way to Export Single Tracks in Audition

    Hello,
    What is the best way to export one single track (stereo or 5.1) from a multiple track mix in the Multitrack Editor if I want to make it mono? Is it by just muting the tracks I don´t want in the final mixdown and then selecting a mono Master in the Mixdown Options box?
    What about exporting only a few of the tracks from a multiple track mix to one mono file? Same process?
    Thanks!

    "Export all Tracks as Audio Files" found under File>Export.
    This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
    If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
    Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

  • What could be the best way to Export data from 11.5.8 instance to 12.1.2?

    Hi All
    What could be the best way to Export data from 11.5.8 instance to 12.1.2?
    Release: 11.5.8
    OS: Oracle Solaris on SPARC (32-bit) verison 9
    DB: 9.2.0.1
    Thanks in advance

    What kind of data you are looking to move?
    Database export/import is only supported for full database export/import and the application release should be the same on the source/target nodes.
    You can move the setup using iSetup or FNDLOAD.
    Thanks,
    Hussein

  • What is the best way to export the data out of BW into a flat file on the S

    Hi All,
    We are BW 7.01 (EHP 1, Service Pack Level 7).
    As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
    What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
    Thanks in advance,
    - Shashi

    Hello Shashi,
    some comments:
    1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
    2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
    3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
    For completeness, here's the most recent documentation which also lists other options:
    http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • What is the best way to export a cutterline from photoshop?

    What is the best way to export a cutterline from photoshop?
    Wie exportiere ich am am besten einen Schnittlinie aus Photoshop? Ich bekomme von einem Wort immer nur den ersten Buchstaben exportiert, obwohl alles gerastert auf einer Ebene liegt.
    Thank you! Vielen Dank!

    What are you talking about exactly?
    If you need to export vector data Photoshop is not the first choice but if you have Type Layers (without faux styles), Vector Masks or Paths it is possible.
    alles gerastert auf einer Ebene
    does not seem to make sense in this context though.

  • What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

    What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

    You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
    regards,
    Nick

  • What is the best way to export a slideshow .I like to show my slideshows via appleTV on my TV

    What is the best way to export a slideshow.I like to view  the show trough AppleTV on my television.

    You don't really give us a lot of information to work with, and assume we know something about this mdeia player. The only way to get the slideshow to a media player is to export it from iPhoto. To where? Depends on the media player. Will iTunes work? Depends on the media player. Does the media player have a DVD drive? If so, then burning it to DVD with iDVD will work, but it will be standard def not HD.

  • HT204655 What is the best way to export a photo from OS X Photos to Photoshop?

    What is the best way to export a photo from OS X Photos to Photoshop?

    Just a note:  if you Option-drag the thumbnail to the Desktop you'll get the original file.  Regular dragging will get you the preview version or the edited version if it's been edited in Photos.

Maybe you are looking for