Best way to get text into li elements

Originally I was using CSS to add text over a background in
position. In IE7 it went haywire. I put the elements in an UL as LI
but now I don't know how to get the text in there. I'm sure I'm
overlooking the obvious. Much appreciated.
http://hipnoticinc.com/howard/index.ul.html

You can't do it this way at all. What will happen when the
text is resized?
Blammo.
I'd make three divs, each with three images: an image slice
for the top and
bottom of the box, and a third as a repeating background for
the middle.
You can see a good and simple example of this here -
http://www.murraytestsite.com/shadow.html.
It shows how to use those three
images.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"max71b" <[email protected]> wrote in
message
news:gnfiqa$lfn$[email protected]..
> Originally I was using CSS to add text over a background
in position. In
> IE7 it
> went haywire. I put the elements in an UL as LI but now
I don't know how
> to get
> the text in there. I'm sure I'm overlooking the obvious.
Much appreciated.
>
>
http://hipnoticinc.com/howard/index.ul.html
>
>

Similar Messages

Panasonic HMC150-Best Way To Get Footage Into FCS2, etc.

I've just ordered a new Panasonic AG-HMC150, to replace a Sony V1U.
A couple of questions while I'm waiting for it to get here: First, for anyone using this camera with FCS2, what's the best way to import footage? Should I connect the camera with the SDHC card mounted to the Mac via USB, and then use Log and Transfer? Or, is it better to use a separate SDHC card reader? Also, is it better to copy the files off of the card to an external HD first, and then use Log and Transfer?
Finally, in another forum I read that shooting in 720p (30 or 60?) yields better looking SD DVDs after using Compressor than 1080i; does anyone have any experience with this?
My current workflow is to shoot in 1080i with my V1U, capture to Pro Res, edit, and export with Compressor. For a 1 hour SD DVD, around 12-15 hours in Compressor (using the frame controls)
would be required.
I'm not concerned about any speed increases; my goal is just to have the best looking letterboxed SD DVDs I can get. Thanks in advance for any advice anyone might have. And to Shane, David S., and others: thanks for helping me choose a new camera--it seems to be highly recommended everywhere.

1. My practice is to copy the intact SDHC card to my media drive, and L/T from there. I copy is by write protecting the SDHC card first, and then mounting it with a SDHC compatible card reader.
2. 720 is the sweet spot for this cam. I shot 720/60 and usually encoded from there.
Hope this helps.
Note: Always format the card in the cam first. ALWAYS

Legacy Trial Balance - best way to get totals into SAP

Hi Folks,
I have a query relating to the data migration of Finance items.
What is the best process for updating the new SAP system with the legacy trial balance?
Do you journal in the Opening Trial Balance posting sub ledger items to a Data Load account?
Load the AR / AP sub ledger items via the standard load routine RFBIBL00 which will in the case of customers Debit the customer account and Credit the Data Load Account / Vendors Credit the Vendor and Debit the Data Load Account.
Could anyone please give me a step by step guide as to how to go about this?
Thanks

Hi,
The upload of GL Balances have to split into several steps:
1. Normal GL Accounts: In this case line items are not required and totals are to be updated in SAP. This can be done using GL fast entry if the number is not too high.
2. Open Item Managed GL Accounts: All the open line items are required to be uploaded in SAP from Legacy in order to clear them. Hence, a LSMW / BDC program has to be developed to upload the line items.
3. Customer & Vendor Open Items: All open line items in Customer and Vendor Accounts have to be brought in into SAP. For this also a LSMW / BDC program needs to be developed and upload the line items.
4. Asset Accounting: In case asset accounting is implemented the individual balances of each asset (Gross Value and Accumulated Depreciation) have to be uploaded using transaction AS91. For this also you need to develop a LSMW / BDC program. Further, you also need to update the GL Accounts related to Asset Accounts with totals for each asset class T.Code OASV.
5. Further, material values are also to be updated - Material wise and this should tie with the GL Balance.
In addition, one more point to be noted is the use of Dummy / Conversion accounts for bringing in data from legacy to SAP. It is better to create five or six conversion accounts like for Assets, Liabilities, Revenue, Expenses, Materials etc. The sum of all these conversion accounts should be ZERO after completing the conversion. This way the reconciliation will become easy.
Thanks
Murali.

Best way to get .mp4 into FCP

My camera captures in an mp4 format that is unreadable by final cut pro. These clips are in 720p. I have played around with visualhub, ffmpegx, and mpeg streamclip trying to find the best setting to convert these clips to a usable format.
Converting to DV downscales the video, but is fairly quick.
Converting to xvid diminshes the quality, but is failry quick.
Converting to quicktime takes forever and produces enormous files.
Converting to mpeg2 or mpeg4 with h.264 works okay, but FCP has a hard time handling these files quickly (ie I can't even use the jog dial)
I have yet to find a setting or format that retains quality, is relatively quick to convert, and plays nicely with FCP. Anyone have any ideas?

mpeg and h264 are delivery formats so that is why they don't work well in FCP. They were never designed to be used that way even though it happens. You best bet is to convert to ProRes. Excellent quality even over a couple of generations, decent bandwidth and file size requirement considering today's cheap and large hard drives. But if you still thing it's too large or too time consuming then I would say welcome to HD video. It's not as quick and easy as DV. If ProRes is too much then try DVCPRO HD. Smaller files, less bandwidth.

What is best way to get video into my iMac for recording?

I have a HD camera that outputs both HDMI and Component Analog video. What do I need to be able to get one of these signals into my iMac so I can record/edit it?

What kind of media does it record to? iMovie will import many types of media and formats. I would be using the video from the media if possible not the Video output sigal.

Best way to get DVD into Front Row?

I have a some non-copyrighted DVD's that I would like to get into Front Row without losing the image quality.
Any suggestions?

I just found a used hi8 camcorder locally with a dv connection so would I be better off
1)transferring 8mm cassettes into imovie as dv
or
2) transferring 8 mm cassettes to my standalone dvd recorder and then ripping them on mac, i have done this with one and takes about 2 hours to rip and encode however when dragging the mov file after dvd conversion into imovie I am getting a reading that it will take up to a day to import into imovie.
I know doing dv to mac is easier then #2 but this will cost me money since I would have to buy this 8mm recorder with a dv connection, will there be a difference of quality.
My goal in the end is to have these 15 home movies that are on 8mm tapes on an ext hd edited and as big as possible or good as possible in quality, then I would probably do more serious edits to them and save as smaller files for viewing either via front row or maybe even burning to dvds.
Message was edited by: rwltrz4

Whats the best way to get a big text file in a CLOB variable?

Hi,
I have a very premitive type of question.
I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
Please suggest.
Regards

In addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
PROCEDURE LOADFROMFILE
Argument Name                  Type                    In/Out Default?
DEST_LOB                       BLOB                    IN/OUT
SRC_LOB                        BINARY FILE LOB         IN
AMOUNT                         NUMBER(38)              IN
DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
SRC_OFFSET                     NUMBER(38)              IN     DEFAULT
<BR>
PROCEDURE LOADFROMFILE
Argument Name                  Type                    In/Out Default?
DEST_LOB                       CLOB                    IN/OUT
SRC_LOB                        BINARY FILE LOB         IN
AMOUNT                         NUMBER(38)              IN
DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
SRC_OFFSET                     NUMBER(38)              IN     DEFAULT

What is the best way to get a tune created in GB for iPad into iMovie for iPad?

What is the best way to get a tune created in GB for iPad into iMovie for iPad?

Haven't done it myself, but seems like the correct workflow would be:
From GarageBand (iOS), My Songs -> select song -> Send to iTunes
From iMovie HD (iOS), My Project -> Insert Media -> select by song name
I'm not sure if GB creates its own playlist for tagging exported songs in your iTunes library so selecting by name would be the next-best method.
Have you tried this?

I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running?

I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running? I get an "X" when trying to copy to the "automatically add to itunes" folder on the 2nd computer.

ok... so i i just made sure all my music is all together in 1 folder and i am going to trash my old music folder that is in the itunes folder... and follow your directions - let itunes start w/new library and bring my music in. Well, last little hurdle/question. I noticed that the place where my itunes library is - on an external drive doesnt have much space left on it. The place where i gathered all my music together in order to start fresh - is a different external drive and has LOTS of free space on it.
SO... i now would like to just keep all that freshly compiled clean music right where it is but in advanced preferences I want to point to that new folder on the drive that has so much more space. So... should i delete the old music then go into itunes with a blank library and change the folder in preferences - quit and go back in and then follow your steps to loading my music? If i change the setting of where itunes looks for the music - that doesn't wipe out the old stuff... it just mixes it all up together right? I dont want that!!
i promise this is the last question - i would love to fix this problem tonight and just be DONE!
Thanks in advance for your patience and knowledge!!
Lisa

Hello I have lost my serial number for adobe photoshop elements. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it install

Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks

Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out. I imagine you would need to scan and email that proof if it works at all.

Best way to get photos from windows explorer into PSE 11

Old story. Computer crashed. I re-installed PSE 11. All of the photos are back in My Pictures. What is the best way to get all of the photos back into PSE 11. Thanks for your help. I really appreciate it.

There is a direct option in Organizer which lets you import from iPhoto. This is under Import dropdown menu in left panel.
If you are importing from iPhoto'09, your Tags, Albums Events, captions, star rating would also get imported apart from your media. This works differently for iPhoto'011 where you can get only the media to the Organizer,
Just a couple of things to know:
1. If in iPhoto preferences, you have chosen to create copies of your photos in iPhoto library and your library hence refers to the media store inside the library package, then on importing from iPhoto, Organizer would create copies of all those media under your pictures folder. That means, it would not corrupt your iPhoto package or modify it in any way.
2. However, if in iPhoto, you are organizing by using references to original location on your Hard drive i.e. you are not creating copies of media in iPhoto library then on importing from iPhoto to Organizer, the Organizer would also use the same references and would not create copies of the media.
Hope that helps!
~V

Best way to handle text files in OD10g

We have a requirement to store reports in text format into a database field, to be able to view the reports, and to print them if desired using Forms 10g. What is the best way to handle this?
- define the field in the database as clob or blob?
- if CLOB is the choice, what tools to use to upload CLOBs to the database (since webutil transfer is for blob only)?
- in Forms 10g, can one use the Forms data type LONG for CLOB?
- can you do Forms search on clob and blob fields?
- how can reports that are stored in fields be viewed without first downloading to the client workstation?
- in Forms 10g, what is the best way to view text files residing in local PCs: "host notepad myFile"?
Thanks much for your reply!
gk

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

Starting Fresh With iTunes 9.0.1...best way to get music back in/import?

Had some library troubles with iTunes 9, and decided to do a clean install of not only the program, but of Snow Leopard itself. I was waiting on an iTunes update to come out before I decided to re-load my library in, since I didn't want to risk repeat problems (I've always been one of those bleeding edge-ers, and this is the 1st time I've ever had a problem/held back...guess I learned my lesson). 9.0.1 is out and seems to address the problems I'd been having, but I caught the "start fresh" bug and I want to start over with iTunes. No playlists, play counts, etc need to be saved.
I do have a full backup of my previous system (thanks SuperDuper!), and I'm wondering what the best way to get all of my music back into iTunes is.
-Do I use the Finder to simply drag the contents of my old "iTunes Music" folder into the new "iTunes Media" folder?
-Do I drag the whole folder and drop it onto the iTunes window? (I'm worried this method won't put iPhone apps, ringtones, audiobooks and podcasts in the right place).
-Do I use the import function?
Notes: prior to making the backup, I did upgrade to/select iTunes Media Organization
I did see THIS article: http://support.apple.com/kb/HT1451 but it says it's old and I wonder if it applies to iTunes 9.
Thanks for any help!

You might want to check that your certificate that you made has been applied to iTunes.app
try this code in Terminal"
codesign -dvvvv /Application/iTunes.app
Does the name on the certificate match the one you created?

What is the best way to manipulate text?

What is the best way to manipulate text in Photoshop? Let's say I need to edit an "A" and I want to stretch out the bottom corners of the letter, while not moving the upper portion (wide bottom, skiny top)... what is the best way to do this? I know the "skew" function somewhat moves corners, but I want to take the binding boxes (while in the skew function) and move them individually so it doesn't affect another corner. Is this possible (or am I just crazy?!?!)?

Not sure I get all the nuances of what you want, but have you tried invoking Free Transform, (CTRL+T) then holding down CTRL while clicking/dragging a corner handle?

When I'm done with my fcp sequence, whats the best way to get it to dvd?

When I'm done with my fcp sequence, whats the best way to get it to dvd?

The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
The advice to go to iDVD is even easier.
bogiesan

Best way to get text into li elements

Similar Messages

Maybe you are looking for