Best Way to Implement Streaming Audio Recording?

Hello all.. first time posting here, so try to bare with me. The quick version is my team is looking to have a feature in our website that accesses a user's mic, and allows them to record content directly to our site, much like karaokeplay.com or midomi.com do. We have been told by Adobe that we do not need a flash media server to do this, that the media server will just make it a smoother experience but the basic application can just be coded with Flex. Is this true? Are there other media servers that don't cost as much for a start-up? We have no problem getting a Flash Media Server when we get a little more traffic and can support it, but at this stage, its a significant portion of our budget if this is the only option. Thoughts?
Thanks again!!

Hi there,
If you pulled the "main" number off the phones then you would have
to replace it with a new "hidden" main number. Just transfer to the new
main number using the After greeting Action or route to a second Call
Handler with no Greeting recorded and use the transfer setting.
So, you would need to do a few steps here let's say the main
number is currently 7777 and it's on 8 phones;
- you would need to pick a new number, let's say 8456
- go to the 8 phones and replace 7777 with 8456
- create CTI-RP with 7777 CFWDALL to voicemail
- if 7777 had a VM box change it to 8456
- create a new Call Handler @ 7777
- record Greeting (I would use Alternate) with Legal recording text
- use the After greeting Action to route to 8456 or if 8456 has
no "user with mailbox" to route calls to use the second call handler
with the transfer setting to go to 8456.
I hope I'm understanding your requirements here.
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan

Similar Messages

Best way to insert millions of records into the table

Hi,
Performance point of view, I am looking for the suggestion to choose best way to insert millions of records into the table.
Also guide me How to implement in easier way to make better performance.
Thanks,
Orahar.

Orahar wrote:
Its Distributed data. No. of clients and N no. of Transaction data fetching from the database based on the different conditions and insert into another transaction table which is like batch process.Sounds contradictory.
If the source data is already in the database, it is centralised.
In that case you ideally do not want the overhead of shipping that data to a client, the client processing it, and the client shipping the results back to the database to be stored (inserted).
It is must faster and more scalable for the client to instruct the database (via a stored proc or package) what to do, and that code (running on the database) to process the data.
For a stored proc, the same principle applies. It is faster for it to instruct the SQL engine what to do (via an INSERT..SELECT statement), then pulling the data from the SQL engine using a cursor fetch loop, and then pushing that data again to the SQL engine using an insert statement.
An INSERT..SELECT can also be done as a direct path insert. This introduces some limitations, but is faster than a normal insert.
If the data processing is too complex for an INSERT..SELECT, then pulling the data into PL/SQL, processing it there, and pushing it back into the database is the next best option. This should be done using bulk processing though in order to optimise the data transfer process between the PL/SQL and SQL engines.
Other performance considerations are the constraints on the insert table, the triggers, the indexes and so on. Make sure that data integrity is guaranteed (e.g. via PKs and FKs), and optimal (e.g. FKs should be indexes on the referenced table). Using triggers - well, that may not be the best approach (like for exampling using a trigger to assign a sequence value when it can be faster done in the insert SQL itself). Personally, I avoid using triggers - I rather have that code residing in a PL/SQL API for manipulating data in that table.
The type of table also plays a role. Make sure that the decision about the table structure, hashed, indexed, partitioned, etc, is the optimal one for the data structure that is to reside in that table.

Best way to implement m to n relation?

Could you please give me some advice on the best way to implement m-n relations in apex?
Example: I want to store server and database info. A server can have multiple database of course. But in case of a RAC database, the database can be running on multiple servers. So I have tables:
create table SERVERS (id number primary key, name varchar2(30));
create table DATABASES(id number primary key, name varchar2(30))
and an m-to-n table
create table SERV_DB(serv_id number references SERVERS(id), db_id number references DATABASES(id), instance_name varchar2(30))
So the table SERV_DB can tell me e.g. that database PROD is running on server 'prdsrv1' with instance PROD1 and on server 'prdsrv2' with instance name PROD2
How would you design an apex page to maintain this information (adding relations, updating instance names, etc)? I have a solution using checkboxes and 2 for-loops over htmldb_application.g_f40 (to process checkboxes) and g_f41 (to process text fields with instance names) and some delete statements but the logic behind it looks too complex for me. I am convinced that this can be done more simpler. Seems like a common problem to me, so I wonder if there is no out-of-the-box solution in apex for this?
Could you please show me or create a small demo application with the solution that looks most elegant to you?
Thanks,
Geert

Thanks for your reply. You modified the question slightly, but conceptually it is still the same. What you call the instances table corresponds with my serv_db table. I understand the solution you propose using the tabular report. If I see it correctly, you would have an insert button above the tabular report for each new relation (instance - server) you would want to add. This is ok for the case i used (databases, servers, instances) because there are relatively few relations. However I would not like this solution for other cases. E.g.:
case: you have a list of persons and a list of tasks. You want to assign tasks to persons in a way that each person has multiple tasks to do and each task can be assigned to multiple persons.
Suppose you add a new person, and you want to assign 15 tasks to him. The solution above (with the tabular report) would be quite some work because you would have to click 15 times on the insert button and on each click select a task from the select list. In this case it would be more appropriate to, after selecting the new person, see a list of all tasks (e.g. 30 tasks) with a checkbox in front, so you can mark 15 out of the 30 checkboxes and press submit. It gets more complex when you want to assign also an attribute to the relation, i.e. showing the list with all tasks, a checkbox in front and a select list next to each task where you can choose from e.g. "priority high" or "priority low" to indicate that this task is high or low priority for that person. Is there an easy way to implement that?

Displaying Multiple Values on GUI components - best way to implement

Hi,
my program needs to implement a basic function that most commercial programs use very widely: If the program requires that a GUI component (say a JTextField) needs to display multiple values it either goes <blank> or say something more meaningfull like "multiple values". What is the best way of implementing it?
In particular:
My data is a class called "Student" that among other things has a field for the student name, like: protected String name; and the usual accessor methods (getName, setName) for it.
Assuming that the above data (i.e. Student objects) is stored in a ListModel and the user can select multiple "Students", if a JTextField is required to display the user selection (blank for multiple selections, or the student "name" for a single selection), what is the best (OO) way of implementing it? Is there any design pattern (best practice) for this basic piece of functionality? A crude way is to have the JTextField check and compare all the time the user selections one by one, but I'm sure there must be a more OO/better approach.
Any ideas much appreciated.
Kyri.

Ok, I will focus on building a solution on 12c.
right now I have used a USER_DATASTORE with a procedure to glue all the field together in one document.
This works fine for the search.
I have created a dummy table on which the index is created and also has an extra field which contains the key related to all the tables.
So, I have the following tables:
dummy_search
contracts
contract_ref
person_data
nac_data
and some other tables...
the current design is:
the index is on dummy_search.
When we update contracts table a trigger will update dummy_search.
same configuration for the other tables.
Now we see locking issues when having a lot of updates on these tables as the same time.
What is you advice for this situation?
Thanks,
Edward

What is the best way to implement a cluster-wide object ID generator?

What is the best way to implement a cluster-wide object ID generator?

What is the best way to implement a cluster-wide
object ID generator?Always use 3 because it is prime.
Alternatively more information about the system and the needs of the system might prompt alternative ideas some of which are likely to be better than others for your particular implementation and system constraints.

Best way to implement a shared Blocking Queue?

What's the best way to implement a shared Blocking Queue that multiple JVMs can enqueue objects in and multiple JVM's can dequeue from simultaneously?
Also, I see references on the web to com.tangosol.coherence.component.util.queue.ConcurrentQueue but I don't see it in the current API docs...
Thanks

Hi snidely_whiplash,
snidely_whiplash wrote:
What's the best way to implement a shared Blocking Queue that multiple JVMs can enqueue objects in and multiple JVM's can dequeue from simultaneously?
Also, I see references on the web to com.tangosol.coherence.component.util.queue.ConcurrentQueue but I don't see it in the current API docs...
ThanksThat class is an internal class, AFAIK.
As for implementing a queue, you might want to look at Ashish Srivastava's ezMQ component for some ideas:
http://ezsaid.blogspot.com/2009/01/implementing-jms-queue-on-top-of-oracle.html
Best regards,
Robert

Best way to implement app wide process

I am working on an application that has a list of art work in an sql report.. I want to be able to add each piece to a collection of items (which is stored in a table), so I added another column to the sql report to store the id of the art work. I am just wondering what is the best way to implement the process to insert the item to the collection of items. Since I want to do this from multiple pages - link from art work sql report; link from the edit page for a particular art work; and on the artists page where there is also an sql report, I thought it may be best to have an application process, to save duplicating the process on multiple pages.. however I don't think there's a way to pass the id of the item to the application process? as I was thinking best to have the application process conditional based on request, and then have the link as a doSubmit().
So is it best just to have the link redirect to the same page, passing the id of the item, and then having a process that runs before header that inserts the item, then assigning the item to NULL?
Thanks in advance,
Trent

Daniel:
Thanks for the info. I have found that the IFRAME works nicely for some applications,
however, some applications I want to re-write the front end to look better in
the portal rather than screen scrape.
Thanks for the help
Ryan
"Daniel Selman" <[email protected]> wrote:
Ryan,
Check out the thread (a few days old) titled "Different ways of creating
portlets".
Sincerely,
Daniel Selman
"Ryan Richards" <[email protected]> wrote in message
news:3d2eda12$[email protected]..
I have a few existing applications that I need to port over to portletsin
Weblogic
Portal 4.0. One application is a servlet based web application witha few
html front-end
screens. I am trying to determine how to do this in the best way. Ihave
noticed
that portlets behave differently inside the portal than do stand-aloneweb
apps.
Any help would be appreciated.
The other web application is the Microsoft Outlook Web Access. (Thisone
is going
to be difficult because it is actually an ASP app. I dont know if thisis
possible
without building some proxy code between bea and iis.)
Thanks
Ryan

Best way to implement this code in labview

Hi
What is the best way to implement this code in labview programming.
I have an analogue input which triggers a boolean light when it reaches a certain voltage. but at the same time i would like it to enable two other outputs one for a set period of time and the other stay on until another statement becomes true.
For example
case 1:
Set output high
Delay(2000ms)
Set output low
Case 2:
Set output high
If statement 2 is true
then set out put low
if not then repeat until statement is true
Thanks for your help

Hi David,
The code you posted will work, although note that the front panel becomes 'unresponsive' - as changes in the controls are only read once per iteration. The wait function is an example of an execution timing VI, however if we want to do software timing (like a 2 hour wait) - we should use software timing VIs.
Check out the following example (note we can stop execution during run-time):
Regards,
Peter D
Attachments:
SoftwareTiming.vi ‏26 KB

Best way to implement FREE purchase?

Hi,
I have purchases that are free for logged in users. What's the best way to implement a no-payment solution? Would having the payment fields hidden and COD auto-selected if the amount field is 0.00 a good idea? Is there a better way anyone has implemented this? And how about security flaws?

Hi
Here is an article about "no cost" orders
COD payment method will not work for zero value orders , you will need to use the Free payment method described
in this article http://kb.worldsecuresystems.com/893/bc_893.html
Hope this helps!

What is the best way to implement Carousel i.e. web part in a site page on office 365 site?

We can implement the Carousel web part in many ways like content By Query Web Part , jquery (nivo) plugin or content search web part etc. But among these which one is the best way to implement to get best performance of the page?
Thanks

content search web part always provides best performance because it uses the search. only consideration you need to take is, it does not display the changes immediately and you need to wait for the incremental crawl to happen.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Best way to implement service in 3-tier webarchitecture

Hi,
What would be the best way to implement a service in the following 3-tier TopLink architecture: no ejb and a webclient (jsp/servlets)?
Currently I have a server session type and a service pojo using a singleton SessionFactory. The service pojo is used by the jsp/servlets.
Should the service pojo be a singleton? Should a SessionManager be used?
In the examples on OTN a clientsession is directly acquired in the jsp/servlets.
Thanks,
Ronald

Ronald,
There are numerous ways to do this. I would recommend using the SessionFactory. The SessionFactory makes use of the SessionManager, which holds onto the singleton Server session. You can then acquire client sessions using the oracle.toplink.sessions.Session interface from the SessionFactory. There is no need to hold the SessionFactory in a singleton yourself and you do not need to reference the ClientSession directly either.
We have introduced this latest approach to simplify coding. It will work in both the web architecture with JSP/Servlets accessing the sessions as well as within an EJB tier (Session/Message Driven beans).
Doug

What is the best way to implement writable many-to-many relations

As everyone knows, the many-to-many associations provided by BC4J are quite good to read many-to-many associations, but they are not able to write such associations.
There are other solutions using composite associations or cascading-delete foreign keys, but as I was tought now, they are also quite problematic. See thread Internal error: Entity.afterRollback.status_dead -- What does this mean? for more details.
So I ask you: What is the best way to implement writable many to many associations? Do you really have to manage them "by hand"?
Thanks for your ideas
Frank

I'd appreciate any hint
Thanks

Event Structures-best way to implement this UI?

I am trying to write a VI to control & read data from 4 different "channels" (each measuring a DUT) at once. I have written all the VI's for initializing instruments, communicating with the devices (VISA, GPIB), setting bias, reading data, etc...that has all completed. I just need to write the overall program with the user interface to allow the user to control these 4 channels & display the measured data.....as it turns out, this is the tricky part! My head is spinning from trying to figure out how to handle all the possible events.
Basically for each channel, I want the user to be able to
-enable/disable it for measurement (e.g. if there is no device loaded in Ch.3, we don't want to measure Ch.3..maybe disable/grey everything)
-set bias conditions (only if channel enabled). Allow user to change bias "in real-time" by increment/decrementing (e.g. incrementing from 5.00 V to 5.01 V, for example).
-turn biasing on/off (again, only if channel is enabled)
Also, I want each channel to display its measured data (e.g current, temperature reading)..every second or so. No graphs or anything fancy (for now! ), just numeric indicator.
Honestly, this all sounds so simple but I'm having trouble figuring out the best way to implement this, due to the fact that 1) there are multiple channels needing to be monitored for events 2) large number of user events that could occur (seems like at least 4 per channel - enabling/disabling, turning bias on/off, incrementing/decrementing bias values, etc ), Also the if a channel IS enabled, i want to be continously reading/displaying the data. What is the best way to handle this? Should i have 4 separate while loops, each with an event structure to handle events for that particular channel..or will that give me grief somewhre?
Also, I have another nagging question. Pretty much all the examples I see re: Event Structures and booleans involve latched booleans, eg. buttons that are just pressed once and pop back up...e.g. buttons you press to tell it to complete a task (e.g. "Acquire Data" or "Stop") , and once it's pressed it's over and reset. In my case, some of the booleans would not be latched...e.g. the "Enable Ch.2" button would be 'TRUE" as long as i want Ch. 2 to be read....does that make sense? Then, say hours later, if i did want to disable that channel, i would change it to "FALSE" and while that would be an "value change", the new value would not be "TRUE"..does that make sense? So not sure if that would be dealt with the same way in an Event Structure.
Hope this all makes sense and many thanks in advance for any help!!!

You're halfway there. I'd say the best solution is a producer/consumer structure, the event structure is used to generate queued commands to the consumer loop.
All data is handled in the consumer loop, where you among other things have an array of clusters of channel/instrument settings. (I usually have several cluster, one for test data, one for instrument settings, one for general settings and so on)
The event structure can have a 1 sec timeout, in which you queue up a Measure command.
In the consumer, in the measure state you loop through your instruments and if enabled you measure them and update their indicators.
The general (smart) way to setup the queue is with a cluster containing 2 elements, a typedef'd Command and a variant.
This way you can send data with the command in any form which is then interpreted in the consumer.
If, e.g. you press the Enable button on a channel, you can enqueue Enable and the channel number.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Best way to update AC97 audio drivers?

Is the best way to update AC97 audio drivers = dl. from msi the latest drivers which are 5.10.00.5970 (A3.80) I currently have 5890. Then uninstalling old ones from add-remove programs then install newest ones. Since live update doesn't seem to get it done. Thanks
Den

I agree with the package that is in Dr Stu's link, I downloaded that complete package which includes NVMixer for speaker setup and fine tuning your sound system.
Regards; Pop's

Best way to implement a simple read of multiple stings from a db

Hello guys,
I am trying to read a collection of countries (Strings) into a collection inside a Movie object. The countries reside in a separate DB table with a FK referencing the Movie.
My questions:
1) What is the best way to implement this? Do I need a seperate entity 'country' ? Is there a general way to read many strings into a collection?
2) the countries list does not have to be updated, only read. How do I make sure it is not persistent?
I have noticed that in my JPA implementation (in netbeans) I do not have something like CollectionOfElements (that is present in hybernate).
Thank you,
Marek

>
My questions:
1) What is the best way to implement this? Do I need a seperate entity 'country' ? Is there a general way to read many strings into a collection?
Probably yes, you need to have one entity for country.for getting the right answer, Post it here - Enterprise Technologies - Java EE SDK (http://forums.sun.com/forum.jspa?forumID=136)

Best Way to Implement Streaming Audio Recording?

Similar Messages

Maybe you are looking for