Best way to increase audio level

I am thinking of two ways to increase audio level on a FCE project. One is to copy the audio track and duplicate it on an another audio track. The other is to increase the level of the existing audio track (modify>levels . . . ). Which do you folks out there think is best? Thanks in advance!

Thanks again Tom.
I am just putting together a classroom video. I used four cameras. I edited it all down, and moved everything to one video track. I chose the best audio track and am using that. So I'll probably just go with relative. And it appears I don't really have to choose the audio track when adjust level, as there is only one (well, two, but it is a stereo pair). I just go to modify>levels . . . and then move the slider over a bit, and that seems to modify the levels fine without any track selected.

Similar Messages

Any way to increase audio level of your movie?

I've uploaded a taped video into iMovie and when I play it back, the volume level is too low (I can hear it but it's not loud). I've increased the system pref vol, the vol level, and the volume level in iMovie so everything has been turned all the way up.
I saw where you can extract the audio. What can you do with it when you extract it? Incresase it? And if you can increase it, how would you add the audio back to the movie?
What I want to know is, is there another way to increase the volume if you've turned up all the computer volume controls and it's too low?
Mark

The best place to increase / adjust audio levels assuming the source video footage has something to work with is in the video editing app. Have you tried posting this question to the iMovie forum?
If your iMovie has low audio levels to start with then this will also be reflected w/in iDVD if no adjustments are made beforehand. Hope this makes sense.
Also check in the iMovie Help Menu if you haven't already:
I can't hear the audio in my movie
If you can't hear some or all of the audio in your movie, here are some things you can check:
Make sure your computer's volume is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
Use the volume slider below the iMovie monitor to increase the movie volume.
Make sure the audio checkbox is selected for the track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
Making your movie louder or softer
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Message was edited by: SDMacuser

(workflow question) - What is the best way to handle audio in a large Premiere project?

Hey all,
This might probably be suitable for any version of Premiere, but just in case, I use CS4 (Master Collection)
I am wrestling in my brain about the best way to handle audio in my project to cut down on the time I am working on it.
This project I just finished was a 10 minute video for a customer shot on miniDV (HVX-200) cut down from 3 hours of tape.
I edited my whole project down to what looked good, and then I decided I needed to clean up all the Audio using Soundbooth, So I had to go in clip by clip, using the Edit in SoundBooth --> Render and Replace method on every clip. I couldn't find a way to batch edit any audio in Soundbooth.
For every clip, I performed similar actions---
1) both tracks of audio were recorded with 2 different microphones (2 mono tracks), so I needed only audio from 1 track - I used SB to cut and paste the good track over the other track.
2) amplified the audio
3) cleaned up the background noise with the noise filter
I am sure there has to be a better workflow option than what I just did (going clip by clip), Can someone give me some advice on how best to handle audio in a situation like this?
Should I have just rendered out new audio for the whole tape I was using, and then edit from that?
Should I have rendered out the audio after I edited the clips into one long track and performed the actions I needed on it? or something entirely different? It was a very slow, tedious process.
Thanks,
Aza

Hi, Aza.
Given that my background is audio and I'm just coming into the brave new world of visual bits and bytes, I would second Hunt's recommendation regarding exporting the entire video's audio as one wav file, working on it, and then reimporting. I do this as one of the last stages, when I know I have the editing done, with an ear towards consistency from beginning to end.
One of the benefits of this approach is that you can manage all audio in the same context. For example, if you want to normalize, compress or limit your audio, doing it a clip at a time will make it difficult for you to match levels consistently or find a compression setting that works smoothly across the board. It's likely that there will instead be subtle or obvious differences between each clip you worked on.
When all your audio is in one file you can, for instance, look at the entire wave form, see that limiting to -6 db would trim off most of the unnecessary peaks, triim it down, and then normalize it all. You may still have to do some tweaking here and there, but it gets you much farther down the road, much more easily.Same goes for reverb, EQ or other effects where you want the same feel throughout the entire video.
Hope this helps,
Chris

What is the best way to increase my macbook pro's memory, it is 4g now.

What is the best way to increase my Macbook's memory? it is a 4g now.

And what is the exact model of MBP that you have?
Normally, assuming your Mac supports more than 4 GBs, the best way is to buy the specific RAM required for your machine to replace the RAM that is now installed. But we can't tell you that without knowing what model you have.
Open System Profiler in the Utilities folder and report what you find displayed for the Model Identifier.

Best way to adjust audio on Final Cut Pro 5 Quicktime Export?? Render files

What is the best way to adjust audio on Final Cut Pro, Quicktime self-contained export? Please note all render files and orginals master clip are gone. So adjustments will need somehow be made to the exported Quicktime file.
As always thanks in advance for your reading and replying to my post,
Sebastian

Export the aiff file out of QT Pro, and import it into SoundTrack. Sweeten there

Best way to handle audio and video?

Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
Thanks for any help

Yes that should work for what you want.

Best way to increase image size for print

I have a jpeg of an image that I will have to increase roughly 140% for a final print size of 16"x20". I am creating the final design in InDesign, but am editing the image in Photoshop first. My question is what's the best way to increase the size of the jpeg first in Photoshop (I assume) so that when I bring it into InDesign it is maximized in terms of resolution but not so large that the file size prohibitive for sending.
I've already cropped the image, but haven't adjusted any of the sizes. The dimensions are currently: 3233 pixels x 2586 pixels, and 10.777 in x 8.62 in at 300 pixels per inch.
Do I bring it into InDesign this way or increase the document size first in Photoshop? I assume the latter.
If I increase the size in Photoshop, I assume I should resample the image. If I do, that increases the pixel dimensions and file size to over 82.4M. Is there a way to keep the 300 ppi resolution while reducing the file size?

Photoshop CC now has Preserve Details as well as Bicubic smoother for enlargements.
140% is not asking much for enlargements. Photoshop may suffice.
You mention 300 ppi. Is it really necessary? In the days of offset presses,that was the standard, but what is it for a photo inkjet or the printer you use? You may not need 300.
Personally when I enlarge, I like Photozoom Pro. I have it on my Mac and PC and find it better than stock enlargement in Photoshop. Of course it's $99-$199 depending if it's on sale.
Here's a bit more about digital enlargement in this Sydney Morning Herald article
http://www.smh.com.au/digital-life/cameras/how-to-enlarge-images-without-pixelation-201306 26-2ovts.html
Of course Photoshop is for preparing photos for print and the web, so you would want to finish your photos there before moving them to InDesign.
Trevor Dennis, Noel Carboni and many other professionals can give better answers on the subject of enlargement and printing so I hope they will post advice as well.
I can't answer the last one honestly, I've never prepared prints for room exhibit, so I can't say what works best.
Good luck. I hope you can get it sorted out.
Gene

HT1198 I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

Done. Thank you, Allan.
The sparse image article you sent a link to needs a little updating (or there's some variability in prompts (no password was required) with my OS and/or Disk Utility version), but it worked.
Phew! It would have been much more time consuming to use Time Machine to recover all my photos after repartitioning the drive.

Can you please tell me the best way to increase the number of the downloads of my free ibook

Since I got the green light in iBook store my free book has been
Downloaded about 50 times in 10 days.
What is the best way to increase the number?
The title is : monter a cheval
It's in French
Thanks for the help

Do you, or anyone ese, have experience in this service? And how's the paid vs free services they have?

What is the best way to increase the volume for the phone? My Dad has a hearing aid and could use more volume.

What is the best way to increase the volume for the phone? My Dad has a hearing aid and could use more volume.

https://itunes.apple.com/gb/app/hearyounow-your-personal-sound/id569522474?mt=8
Have a look here and in particular
"Customers also bought "

What is the best way to increase the storage capacity of my Mac Air 256Gb?

What is the best way to increase the storage capacity of my Mac Air 256Gb?

Try here and scroll down toward the bottom. There's no inexpensive solution and in some cases it actually might make more economic sense to sell your current computer and buy a new one.

Best way to increase a-weighted RMS

what is the best way to increase your a-weighted rms when mastering?
ive looked around and cant find much on this.
any insight would be apprciated:)

Absolutely - I've seen plenty of those, where the top and bottom are cut off - in a way, I suppose it doesn't really matter if the music only has one dynamic anyway (FULL ON, MAN!!!).
I've been getting in to more 'finalising' aspects recently and I noticed that on one particular track I'd kept the adaptive limiter on the main out as I was mixing and ended up putting up the faders a bit too far without really noticing that some bad distortion was being introduced by the limiter being pushed too far. There's always a balance somewhere with the limiter settings, but I don't want to clip on either that plugin or any others that may matter and definitely not on the main out.
I think.....

Best way to rearrange audio slices?

What's the best way to move audio slices around? Is there a simple way to do that using flex time that I haven't discovered yet? I usually do alot of snare replacing on live drums, taking one hit where the drummer hit hard, and pasting it in to replace weaker hits. There doesn't seem to be a way to grab a flex slice with the mouse and move it around ...
I've used the new drum replacement feature on L9 and it works well, but was wondering if flex audio offers a better, more elegant way to move slices around other that just cutting and pasting them the "old fashioned" way.
Thanks

Greetings,
You could always try to convert your loop into an EXS24 instrument and move the midi notes around. I can totally see what you mean though. It would be nice to simply re-order or replace the slices right on the arrange window. As for converting to EXS, the transients don't quite read as nice as I would like them to, so converting might still be a little unfriendly.
I still do it the "older" fashion way, by opening ReCycle 2.1 (its 2010 and still Rosetta) slicing my loop and importing into Logic. Only there can you rearrange at will within the imported folder that's created once you imported the REX. On the upside, you get complete control of your transients along with ReCycle's stretch algorithm.
I second the ability to rearrange flex (slice) transients directly on the arrange window.
Hey, it could happen. Crazier things have.
Cheers
LGK

Best way to play audio in 24bit 48Khz WAV format?

Hi guys, whats the best way to play audio in 24bit 48Khz WAV format through FF? The format cannot be changed and the files are local. I was hoping the HTML5 audio tag would play it but it seems to be limited to 16bit. Is that correct? Whats the best way to get sound playing quickly?

Which media player plugins do you have?
Plugins like RealPlayer and Windows Media Player and QuickTime should be able to play such files if the player can play them if you open the files directly in the player.
Does it work if you open the file via the location bar?
I only have 16 bit 44kHz files, so can't test, but opening such a file via the location bar works.

Best Way to copy audio books

Hi
What is the best way to copy Audio Books. I just bought all the Harry potter on CD's. I have a 30g 5th gen IPOD had it for 2 month. Upgraded ipod to 1.2 and iTunes 7.0.1.
Everything is running fine.
Thanks,
Windows XP Pro

Hello again,
I went and checked PDF document properties. The document was created by an application called (3B2 Total Publishing). It's the application that the printing press used to creat the PDF file. Unfortunately I don't have the source document and the printing press claim they don't have any source files but used in-house applicatin to create the PDF book.
I checked fonts used in the PDF file and I found 17 fonts named T1 to T17 and all (Type 3) fonts. I'm seasoned IT engineer but no experience in publishing. So, no idea whether or not this information is usefull to find a way to publish these books in epub.
Cheers,
Abdul

Best way to increase audio level

Similar Messages

Maybe you are looking for