Best way to Install after installing new HD

Today I am installing a New WD 500GB Hard drive in my 2.16 core duo Macbook pro. I am trying to find the best way of installing osX. I have a Time Machine drive with back ups on it, but os X has ben acting kind of funny the past few days but i think it jest might be the HD witch is one of the reasons why i am getting the new one. Any input would be grate.

Wouldn't using the installtion disks work?
Or you could make a 10GB partition on the TM drive in Disk Utility, then clone over OS X Disk 1 to that partition and install from there. Unnecessary for this installation, but will make future reinstallations significantly faster and allow you to get a lean system whenever you want.
Then transfer the material what you want from TM onto the new install by Browsing other TM disks.
If you think there's a risk that TM has picked up any odd behaviour from the old disk, then I'd format TM after you've transferred what you need. Partition the TM drive into three partitions (if there's space): TM, system clone (using SuperDuper), and OS X disk. You could also add a fourth partition for a cleanly installed system with applications which makes reinstallations a breeze in the future.
Just some thoughts.
/p

Similar Messages

Best way to install new motherboard

I'm thinking of getting a new mboard - MSI of course (probably, maybe) - and was wondering what the best way was of installing onto an existing system with an os configured with different mobo settings. I had trouble installing my current nforce2 board because my os rejected it, expecting the via board that was there previously, so i had to reinstall windows. Is there a best practice for installing new boards with an installed os?

It can be done several ways, but it's not recomended.
From Via to nForce, you can DL and run the VIA Hyperion Installer and select to uninstall the chipset drivers rather than install. Look in the Control Panels Add Remove Programs and Uninstall any driver installation programs found. In most cases this should work, in some cases it doesn't. Then restart to complete the uninstallation, then shutwon completely and continue with the hardware swap. Do this and your Registry will become even more bloated if it's been running on the last installlation for some time and your the type that likes to tweak and try new programs all the time.
You can also Insert the XP CD and there are several options available to repair the OS or install right over the top of the current OS, I only recommend the latter as it's more of a bandaid and more to making sure you can recover your files before you do a proper installation.
Prepare for the worst and "Back Yo Stuff Up!"

What is the best way to install new version... adobe always leaves stuff behind from the old version

Hi,
I've gone through the installation of a new version, well... 8 times before. And have noticed that adobe has the nasty habit of not cleanly uninstalling the previous versions...
What is the best way to do this?
Should I do a regular install and trust adobe this time to completely remove the old version and its associated directories?
Or should I uninstall the old version and install the new one? I've always been afraid to go this route bocause of the organizer files.
Thanks for your comments.

So, just to be clear: the "proper, Adobe-recommended" way to go about an upgrade would be to install the new version and THEN remove the older version by means off "Add/Remove programs" ??
Thanks to all for your help.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2

Best way to install a photosmart 5180 on new 8.1

What's the best way to install a Photosmart 5180 on a new 8.1 pc? I have the disc, but I don't think it'll work. Should I download the software and hook it up via USB cable or wireless. The pc is wireless, and I tried to find the printer on the network, but no luck.
suggestions?
This question was solved.
View Solution.

Hi,
I can't re-create your error. I've got NO problem at all:
All I can say.: please download again, save it on desktop and run it from there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

[Solved] 'Best' way to install programs?

I was wondering what the arch Linux community thought the best way to install things is.
I was wondering if compiling things from source would be better in some cases then using Pacman, I'm sure I read that you prefer people to install from source, when I was reading the tex live wiki. Now I could have been wrong, read something wrong or just not understood.
I'm sure this makes the program faster, and makes me be able to install them to my every need, but then is updating and keeping them up to date problematic? Should I install OpenGL and mesa from source, and leave the rest like Firefox to Pacman?
I am new to Linux, and haven't compiled anything from source, and would like to know how to.
Last edited by Peilonrayz (2014-06-21 12:03:57)

Peilonrayz wrote:
There are two good ways to install TeX Live. One is to use pacman. The other is to use the upstream installer.
Can you please show me what you are referring to?
I didn't know about the TeX having it's own installer, it's just as I read this when I was installing it last time: `Installing TeX Live manually honors the Arch Way in that it gives you much more control and lets you understand the process.`
After being told about PKGBUILD, this makes much more sense as I read it as compile from source, rather then alternate ways like this.
The 'install manually' is referring to using upstream's installer. It is not talking about compiling the binaries from source.
For details of the options offered by upstream, see http://www.tug.org/texlive/. If you have a reasonable network connection and are not planning to install on more than a couple of machines, the network installer is probably the best option. The 'quick installation' instructions are useful but you will want to refer to parts of the full installation documentation as well if doing this for the first time.
I recommend accepting upstream's defaults for the most part. In particular, I recommend using the 'full' installation scheme unless you are short of disk space.
I also recommend *not* installing as root. This is also in line with upstream's recommendation. What I did was create a new user and group (texlive:texlive). As root, I also created the directory /usr/local/texlive and made sure it was owned by the texlive user. Then I logged in as that user to install. This works well. Neither the installer nor later use of the utilities can touch your home directory or system files. There is no downside to this - it is no less convenient than having the installation owned by root. So you gain a security benefit for no cost. (Or minimal cost: you have to create a single user and group, make one new directory and chmod that directory appropriately.)
# adjust options as desired
useradd -d /usr/local/texlive -m -g texlive -r -s /bin/sh texlive
Set a password for the new account, and check ownership and permissions on the new directory:
drwxr-xr-x 7 texlive texlive 4.0K Meh 26 02:14 .
Then log in as texlive and install.

What is the easiest and best way to install or open flash drive in Sarfari on my Macbook Pro...2010 model using mountain lion

what is the easiest and best way to install or open flash drive in Sarfari on my 2010 macbook pro using mountain lion?

There is no really good way to do what you want. Any tracks you purchase via your own iTunes Store account are for your personal use, tied to your iTunes Store account, and can't be given to anyone else. If you don't want to gift the tracks to her and can't access her iTunes Store account, the only option other than creating her a completely new iTunes Store account (which will require a new email address for her) is to buy the CDs those tracks are on.
Regards.

What is the best way to install qmail?

I'm about to rebuild my server and want qmail on it. What is the best way to install it?
In the past I've used http://qmailrocks.com/ but I've also looked at http://lifewithqmail.com/.
The problem I found with qmailrocks was that because it doesn't come from packages I have to remember to keep it up-to-date and I rarely remember.
There is the package in AUR, can anyone comment on the stability of it and how easy it is to get running after it has been installed?

myimagination's Mac OS Lion FAQ.
https://discussions.apple.com/message/15733040#15733040
Topics covered in the FAQ.
0. Cautions / Before Upgrading.
1. Apple UpToDate Program.
2. How many Macs?
3. Re-downloading from App Store?
4. Reinstalling Lion. (clean install)
5. Making a Lion DVD.
6. Java
(will be updated)

Best Way to Install CS6 Design/Web Premium Upgrade

Hi,
CS6 Design/Web Premium Windows Upgrade (for CS5.5 Design Premium) is shipped and on its way for 5/10/12 delivery. Reading on these boards about CS6 installation problems (plus the installation difficulties for CS5 upgrade from CS4), prompt me to ask:
What is the best way to install the CS6 upgrade?
Is there a CS6 clean tool available?
I would ordinarily first deactivate and uninstall CS5.5 Design Premium.
Is this the best way to proceed?
Regards,

If you do not want to keep a CS5.5 concurrent installation , this is the best way in my opinion.
The CS5.5 uninstallers do not remove everything of CS5.5 however. There will be e.g. left overs in the Help titles of the CS6 Help Manager. There is a cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html
Cheers,
Dave

Best way to install boot camp

Hello, i got a MBP recently, and i would like to put boot camp on it, mostly so that i can play a online game (magic online) which is windows only, but isnt stressing on the video card, (just cards, nothing fast and flashy, so i would expect to be able to run it smoothly)
What is the best way to go about this? Am i able to get an external harddrive/ big flash drive to put windows on and then only have it on here when i need it, i dont really want to partition my internal drive, as it seems like that always leads to problems later on...
I guess what im asking, is you the people who use boot camp, what is the best/easiest/most reliable means of installation and use for boot camp. And where is the best to place to buy a windows cd for the installation (xp)
Thanks!

Hi,
Microsoft has gone to great lenghts hindering the user to install Windows onto external devices.
Googling through the net brings up some instructions on how-to do this nonetheless, but it is quite an effort.
Best way to install WIndows on your Mac for playing games would be the useage of BootCamp and by following the BootCamp Installation Guide to be found here http://www.apple.com/support/bootcamp/ or inside the BootCamp Assistant in OSX (in the Applications/Utilities folder).
Regards
Stefan

What is the best way to install Lion?

i already downloaded Lion but need to know that what is the best way to install lion?

myimagination's Mac OS Lion FAQ.
https://discussions.apple.com/message/15733040#15733040
Topics covered in the FAQ.
0. Cautions / Before Upgrading.
1. Apple UpToDate Program.
2. How many Macs?
3. Re-downloading from App Store?
4. Reinstalling Lion. (clean install)
5. Making a Lion DVD.
6. Java
(will be updated)

What is the best way to install an Airport to a G5?

Hi. My G5 came without a built in Airport card. I've recently bought an Airport Extreme. What is the best way to install an Airport to a G5? Should I buy the Airport card from ebay or some other retailer & do the installation myself OR should I buy it & get somebody professional to install it?

Hello ajdoyle78. Welcome to the Apple Discussions!
The April 2005 and earlier Power Mac G5s are compatible with the AirPort Extreme card. The later Power Mac G5s (models: M9590LL/A, M9591LL/A, M9592LL/A) are not. Instead, these models require a special combo AirPort/Bluetooth card which must be installed by an Apple Authorized Service Provider (AASP).

What is the best way to install client sccm 2012for all computer in my company

in my company(25000 users) we have alot of branch(100-150 small Branch (every branch 50-100 users)) & 20 branch (100-100 users) .
now only 11000 client in sccm2012
What is the best way to install client for all computer
Note that sccm 2012(1 primary site and 4 site system server every server (4 roles (management point , Distribution Point , site system , component server ) ))
and in boundaries i create boundaries but not for all branch and enable (boundary group for site assignment ) for every group
What is the best way to install client for all computer
thank u

You basically have 3 options, if you disregard a manual install.
1. Client Push. Configure an account with local admin rights on the clients, and enable Site-Wide pushing of client.
2. GPO. Import the GPO templates and enable the client to be installed that way
3. Startup script.
Of the 3, I usually go with a combination of client push and GPO.
Take a look at http://technet.microsoft.com/en-us/library/gg712298.aspx for the complete documentation.
FB

What is the best way to install snapdrive to many hosts?

Hi all, Next weekend, I planed to install snapdrive to over 160 hosts. So what is the best way to install snapdrive? Over 160 UCS hots! I found "remote install" in snapmanager for Hyper-v. This is useful for me? Please let me know easy way to install snapdrive to so many hosts. Thank you.

The current generation of SnapDrive does not support remote installing to multiple hosts.What you saw about HyperV is simply limited to the HyperV host, so it's not remote to multiple hosts across the network.Since SnapDrive has a command line to install, you CAN however script the remote installation.I suggest you find out the exact installation command which works for your environment and use a program like psexec to remotely execute the installation command against multiple targeted servers.If you need help with the script, NetApp Professional Service can be engaged and can even come on site and do it for you, if needed. hope that helps,Domenico

Best way to Install after installing new HD

Similar Messages

Maybe you are looking for