Best way to lengthen a clip in the middle of sequence?

Setup:
FCP 7 with a newb at the wheel.
I've got a sequence with about 30 clips in it.
Problem:
Let's say I want to lengthen the duration of clip #17 by a second or two on the timeline. The best way to to figure out how do this was a bit cumbersome. I had to:
1) Move clips 18 thru 30 further down the timeline.
2) Lengthen clip 17 to where I want it
3) Delete the gap between 17 and 18.
I've searched and searched for an easier way to do this but haven't had any luck. Unless I'm using them wrong, ripple, roll, and slip tools don't do it because they either affect the length of the adjacent clips or change the in point of my clip.
Question:
What's the best way to lengthen a clip in the middle of a sequence?

Select the cut between 17 and 18.
Press 'u' twice (Only the left side of the cut is selected that way.
Press '>' or SHIFT-'>' as many times as you like to ripple the clip to the length f your desire.
OR
Double click on this cut betweeen clip 17 and 18.
The trim window opens.
Click on the Left window of the Trim Window (note that only the left window will have a green line on top now).
Again use the '>' button. And again this will trim the shot. Only now you'll be able to see what the new outgoing frame is (left window).
Most important:
Do as Tom Wolsky says and read the manual about ripple and trimming and roll and slip and slide. That'll be very valuable tools for editing fast and easy.
Rienk

Similar Messages

What is the best way to resize a clip

What is the best way to resize a clip? I have some clips in 1280x720p and a B camera shot of the same person that was shot at 1440x1080p and I want to multi-edit them so they need to be the same size. Is there a way inside FCP to re-interpret the 1440x1080 to 1280x720 or do I have to Export them as smaller clips and re-import them? Just have a lot of clips so would be good to find a internal FCP way of doing it.

Well Zeb, again with the insults. If you had just stated simply "What codec" are you using that would have been fine. But instead you decided to insult me and assume I knew nothing.
FYI I started working with video in 1985 and was one of the first to use Digital Video in 1991 as a Software Developer. So I can assure you I know a lot about codecs and NLE having even written one once. One of the things I learned in IT was to always ask for the best route through a problem from the experts around you before wasting valuable time and money finding your own, and usually the dead-ends at that!
So there you go, next time I'll mention the codec and next time if you could be more polite then things will progress more smothely on here

Best way to make a clipping mask with indesign drawn vector shapes?

What is the best way to create a clipping mask with vector art that is drawn inside of indesign?
I have a group of vector shapes to paste into a rounded corner box. This art is grouped.
What i tried:
-create the rounded corner box i want the art inside
-cut art
-edit > paste-into
This worked, but i could not figure out how to move the artwork once it was pasted into the shape. With the direct select tool i could move the individual objects, but not the group of objects. Any ideas?
Is this the best way to acomplish what i'm trying to do?
Thanks!

Yopu don't mention the version of ID, which makes a difference here.
Paste Into is correct. In CS5 you can then use the content grabber donut to move the group inside the frame. In all versions you should be able to select the frame, tehn use Object > Select > Content to get the group, or use the button for that onthe Control Panel. Before CS5 you'll need to use the arrow keys or grab the center spot withthe mouse to move the group.

HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb. Whats the best way to use them both on the same itunes account?

I have 2 Ipod touch's, one a 64gb and one an 8gb. Whats the best way to use them both on the same itunes account?

Click here for options.
(64410)

Any way to play two clips at the same time one over the other? (transprent)

Any way to play two clips at the same time one over the other? (transprent)

Yes.
See the information here for a variety of ways to do this:
http://discussions.apple.com/thread.jspa?threadID=933500&tstart=50
http://discussions.apple.com/thread.jspa?threadID=903151&tstart=0
http://karsten.schluter.googlepages.com/jackiechancredit
http://www.geethree.com/slick/V_04.html

What is the best way to protect my macbook on the internet

what is the best way to protect my macbook on the internet, using mobile broadband?

against what ? malware ?
on Macs, all that's needed is common sense.
Mac Virus/Malware Info

What is the best way to connect my ipad to the high-speed Internet connection in a hotel room

what is the best way to connect my ipad to the high speed inernet connection in a hotel room

every connection is a bit different. Generally, connect to the wifi, then you may need to open Safari, and may even need to try to get to one of your bookmarked pages to trigger the 'agree to our terms' page to come up.
As to it kicking you off every so often, there are sometimes glitches with the wifi on iPads, you can also be subject to any programming the hotel has. Like I've noticed various places that only allow you to log on for a period of time before having to relogin.
most hotels have 1-800 numbers, so you can always try calling that to see if their tech support has any tips for the frequent disconnection issue.

What is the best way to connect my guitar to the usb port on my IMac

This is for use with Logic Pro X
what is the best way to connect my guitar to the usb port on my
I-Mac

As has been said really, the less you pay the less quality, and flexibility you'll have on your sound.
For example, you could run on a 'Rocksmith Real Tone Cable' if you just wanted a cheap way of getting your guitar into the computer for some fun. Probably cost you $30 (I live in UK so can't be sure). If you're starting out then this could be considered the best option for dipping your toe in the water without spending too much.
You won't get a really nasty sound out of that if you can process it yourself in Logic afterwards to clean up, but it won't be great either. I imagine it could get quite noisy so you'd need to get heavily gating your guitar sound, if you're playing something clean that's not ideal.
Longterm, you're far better getting a decent audio interface, as you need something to play sound back through, if you have different input sources you usually have to create an aggregrate device on osx to use multple sources at once esp if you're using the built in audio chip on your mac to listen.
All this can add latency and possibly sync issues (i.e. drum tracks not in time with audio etc.), although generally it's not too bad, but it's something worth knowing if you want to do things on the cheap without buying a dedicated interface.
What kind of money did you want to spend? Are you thinking super duper cheap, and then see how it goes and maybe spend more in future if you enjoy it? Personally i would say £100-150 would get your something good to start with, like that Presonus audiobox, there's a lot of options like that available.
My local music shop always push the alesis io2 on new users, gotta say i'm not that overly impressed with it. Line 6 stuff will be good however, but limiting. Although i beleive you get their software for free with it?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

What is the best way to find a file on the servers disk without using web.xml?

          What is the best way to find a file on the servers disk without using web.xml?
          I want to find a configuration file not contained within the war file I have
          created. Is there a way to pass information into the ServletContext with out
          rebuilding the ear or war files? Tomcat 4.0 can do this in its server configuration
          files. Does BEA have the equivalent?
          Regards,
          Eric


You can specify the path to the file as a system property
          eg
          java -Dconfig.file.location=./mydirecotry/myfile.txt com.test.MyApp
          "Eric White" <[email protected]> wrote in message
          news:[email protected]..
          >
          > What is the best way to find a file on the servers disk without using
          web.xml?
          > I want to find a configuration file not contained within the war file I
          have
          > created. Is there a way to pass information into the ServletContext with
          out
          > rebuilding the ear or war files? Tomcat 4.0 can do this in its server
          configuration
          > files. Does BEA have the equivalent?
          >
          > Regards,
          > Eric

What is the best way to manage multiple ipods using the same itunes?

Hi Everyone
i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
Cheers
Liv

If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
Your question as posed was:
What is the best way to manage multiple iPods using the same iTunes {library}?
in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
tt2

Best way to display executive dashboards on the IPad?

In your opinion, Apple, what is the best way to display Executive dashboards using the IPad?
Our company purchased IPads in hopes that they would be able to display the our Web-based Dashboards, but they cannot. The dashboards render fine in the Safari for PC, but in mobile safari they do not. Is there any way to change mobile Safari's user agent?
Is there any other avenue you suggest?

First, Apple will not respond here. We're all just fellow users participating in these forums.
As to your question, what exactly are these "dashboards"? What technology is used to generate them? If it's either Adobe Flash or Java, then they will not work from an iPad and quite likely never will. If they're being generated by standard HTML and JavaScript, then it's possible one of the other browsers, such as Mobile Opera, might work (though with Opera there may be security issues you'd have to investigate before you adopted that as a solution).
Without more detail as to the site(s) you're trying to access, it's difficult to offer more specific suggestions.
Regards.

What is the best way to make video and audio the same lengths for posting on Web?

YouTube recommends doing this to avoid sync problems. Maybe it will also make my videos run more smoothly. I'm talking here about random pauses I see in my movies on YouTube, not the uniform stuttering problem which I pretty much solved by redoing the movie at 30 fps instead of 24 fps. (Original is 18 fps Super 8 movie film.)
Anyway, there is no sound during my titles. The soundtrack starts about 17 seconds in, and ends when the ending titles begin. So what's the best way to add silent audio? The best I can figure is to take some existing sound, put it in where the titles are, and turn the volume down to zero. Seems real workaround-ish, so to speak, to me. It seems to work. I even cranked it up on headphones to make sure there was no residual noice. But I'm curious if there's a better way? No biggie if not.
Thanks.

I should have included the following:
1.) Why can't I make a silent project in GarageBand? I have to instead find a project with a long enough song, make an "iLife preview" of it (see (2) below), copy it from the iMovie Music and Sound Effects browser to the end of the movie, and then open the audio panel and turn the volume to zero. And all this so that video websites don't get confused by a soundtrack that starts in mid-movie.
2.) Why do I have to "render" them by the following process: Double-click a song in the iMovie Music and Sound Effects browser. You get a dialog box saying "The project "The Great Race" cannot be used because it was not prepared with an iLife preview. Would you like to open "The Great Race" in GB so you can save it with an iLife preview?" What I don't understand is why this new thing was introduced and why I have to do it via iMovie.

I have a Mac book pro on vesion 10.6.8 and want to access icloud as it works great on my iphone 4. Not sure best way to upgrade as some of the review of Lion on the appstore are awful. Any advice

I have a Mac book pro on vesion 10.6.8 and want to access icloud as it works great on my iphone 4. Not sure best way to upgrade as some of the review of Lion on the appstore are awful. Any advice as I also have MIcrosoft word etc and don't want to have to purchase these again.

That is the best list ever for Lion compatibility!
You can also do this:
Launch the programs you know and love on your Snow Leopard Mac.
Utilities --> Activity Monitor
Under the "Kind" tab it will identify the programs running PowerPC, Intel and Intel 64.
No PowerPC apps will run under Lion.
Don't worry about Apple's system stuff like Mail, iCal, Safari.
Don't worry about the system processes, like fontd and launchd, those will be replaced if you go to Lion.
Just look for the programs that you need.

I have an iPhone 4 with iOS 5.1. What is the best way to update my phone to the latest iOS platform?

I have an iPhone 4 with iOS 5.1. What is the best way to update my phone to the latest iOS platform?

you can update over the air with strong wireless signal, or by connecting to a computer running iTunes. Either works well. If you do the update over the air, be sure and attach your iPhone to a wall outlet so you have a solid power supply and don't risk the battery dying during the update.
The iTunes approach installs a much larger file because of the connection, but if you have not updated since 5.1 that might be a better approach...replace the entire operating system instead of patching.
Either way, backup the iPhone yourself just for your own protection in the off-chance something should go wrong...a little paranoia while updating is a good thing

Best way to lengthen a clip in the middle of sequence?

Similar Messages

Maybe you are looking for