Best way to make a DVD slideshow?

I recently went on vacation to Italy and Switzerland and want to make a slideshow on a DVD that has section for each country. What is the best way to do this? Would I make two separate iMovie projects for each one? Or would I do the whole thing in iDVD? I am totally new to this so any help is grandly appreciated.

Chris0731 wrote:
I ... want to make a slideshow on a DVD that has section for each country. ...Or would I do the whole thing in iDVD? ...
follow Fred's advice..
I like to have control, to 'edit' my 'shows', length of each slide, transitions, titles, pauses, music, narration.. iDVD is just doing/'burning' DVDs, but editing is an editors job.. = iMovie ..

Similar Messages

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

What's the best way to make a DVD that has a slideshow and home movies?

Is is better to make a slideshow on iphoto, then transfer it somehow to imovie, then add my home movies? I'm new to Mac, so I don't want to get too into this project without advice. Is there a way to make a slideshow in imovie and then add my movies?

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Best way to make multiple DVD

In the past to make multiple DVD's, I just open Encore and burn a Disk and click to do X amount of copies. Is this the best way to do it? Or it is better if I make a file or master dvd and make copies that way?

I use either the multiple disc setting in Encore, or Ann's method, except that I use the great, free utility, ImgBurn. I can also launch multiple copies of it, and use both burners on my system, if necessary.
Not sure that I can think of any +'s or -'s to either.
In a few instances, I have had to use the "master" method, but try to cover the bases earlier on in the process.
Good luck,
Hunt

Best way to make a slideshow for a wedding?

I am trying to make a slideshow for a wedding. What is the best way to make this?

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

What's the best way to make a tribute DVD?

I wanted to make a DVD for my mom for her birthday. What is the easiest way to make a photo slideshow with music with short video clips? Can I make each section a separate slideshow in Iphoto with music and then just import that as a project into iMovie '09 and then string them together with short video clips in between?
Also, I am having different people send me videos. What video formats are usable with iMovie '09?

You might be better advised posting this in either the iPhoto or iMovie forum rather than here in iTunes. I think you are more likely to get relevant answers there as your question seems to be specifically about those programs.

What is best way to make disk backup of CS5 downloaded installation?

Hi,
We purchased the downloadable version of the CS5 Production Premium installer rather than waiting 2 weeks to receive it in box form.
What do you suggest is the best way to make a backup of the downloaded installers, which total about 13.8 gigs? I was thinking of putting the main one on a dual layer DVD-R but the biggest file is 9.23 gb's, nearly a gig over the data limit for dual layer disks. Is it possible to use Toast to split a disk image over multiple files or use Apple Disk Utility to compress the .dmg even further to fit? Or perhaps is the easiest way to just copy it over to a USB thumb drive?
I know Adobe allows you to re-download the software whenever needed, but it would be more handy for us to have a backup here rather than wait for another really long download...
Suggestions?
Thanks!

You can buy a set of backup disks from Adobe for a nominal fee. You might want to give them a call and ask about it.
Otherwise, just back it all up to an external drive.
Bob

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

What is the best way to copy a DVD i made from iMovie? It was HD720 and I don't want to lose any quality in the copies.

What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.

You will need to save it as a video to the camera roll.
Import it into windows as you would a photo.
Then purchase DVD authoring software, and create a DVD.

What is the best way to Burn a DVD Movie

What is the best way to Burn a DVD Movie, do I need a specific program?

pamelafrommelbourne wrote:
What is the best way to Burn a DVD Movie, do I need a specific program?
If you're trying to copy a commercial movie and burn it to disc, then it is expressly against the Terms of Use of this community to describe any method to illegally copy or circumvent copy protection DVD's
If you've made a movie and want to author a DVD, then you should use iDVD, Toast or, if you're really skilled, Final Cut Pro X.
If you just want to move a movie to a DVD, which probably won't play on a DVD player, then just insert a blank DVD, and move it over from the finder. Click burn.

Best way to make a Constant Power Load

What would be the best way to make a load that always draws the same amount of power whatever the voltage on it. For exemple, an load would draw 100 mA at 24 VDC, 150 mA at 18 VDC and 200 mA at 12 VDC. All I found is to use Nonlinear Dependant source.
Any easier way to do this? Thanks.

Sorry about the file mix up, I was anxious to get it posted for you that I failed to realize you were using a different version.
As far as the last "amplifier" in your Leaky Feeder design, I actually hooked it up to the 24VDC supply on the left and this was a direct connect before the first resistor. I realize this is not what would be ideal for your application as probably you have only a certain place in the Leaker Feeder to tap off from. I would suppose this would be going into a different entry way off the main entry at an intersection so I do not know how my adjusting the placing of this would effect the results because it seems to me by doing this I have bypassed a bunch resistance in the Feeder cable itself (if that is what the resistors represent) and also bypassed a number of amplification stages in the process as well.
I will post a picture of my circuit for you to examine and try in Version 9. This is the only thing I could come up with to where the power draw was the same no matter what the voltage input was. The only thing I can see as a drawback is that with this circuit the current remains constant but the voltage fluctuates. If I use a 24V regualtor and drop the input voltage to 12V the current remains at approx 118ma but the voltage drops to 12V when I plug it into your circuit.. I will let you try it and see what you may be able to do with it.
Message Edited by lacy on 04-28-2008 05:47 PM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
Possible Constant Power Load.JPG ‏285 KB

Best way to burn a DVD+R DL disc?

I was wondering what everyone thought was the best way to burn a DVD+R DL disc.
This is how i do it and let me know if you have better results doing it a different way.
1. Never burn from DVD SP, always use Toast instead.
2. Select All Regions (including #7) in DVD SP
3. Build/Format, then select Harddrive, .img file
4. Use Toast and select Copy, then Image File.
1. I never burn in DVD SP because it uses the fastest write speed that your disc/burner does and this seems to have issues.
2&3. I always select All Region because DVD SP by default doesn't select #7 (no clue to why that is) and if you got to harddrive using .img, then that is CMF format and CMF needs all region (RCM Value of 0). Otherwise DVD SP will have different region codes in the MAIN.DAT vs. the CONTROL.DAT. 0 and possibly 64 or 40.
4. With Toast you can set the write speed. I just use 2X and this takes 40 minutes or so for a full DVD+R DL disc.
But..
Is this the best way?
Or is the DVD-ROM (UDF) option a better way?
Any suggestions?

Hi Brian,
Not that this really helps you solve the dvdsp thing but if they are regular clients maybe buy a cheap(ish) dvd player that plays your discs fine and send them it. Explain the ±DL issues. Say the authoring is fine but the ±DL media thing is a mine field so here is a player so proofing goes smoother in the future.
If Toast is working better then send a media input form with the proof stating where the LB will be on the master etc.
I'd like to hear anything anyone else has to say but I'm sure we're aware of most of the options already.
FWIW, if you're running 10.4.x you can type drutil info in Terminal and hit enter to see what types of media the attached drives can burn,
Good luck,
-Jake

What is the best way to make a clickable grid

What would be the best way to make a clickable area that can
differentiate between discrete parts of the area when clicked on.
In other words, instead a having multiple buttons in a row that the
user can click on, is there a way to have an area that has lines to
distinguish the different areas(buttons) but that acts as though
there were multiple consecutive buttons?
For example, if I wanted to graphically simulate the buttons
on a phone but without using buttons. Instead use some kind of grid
or area that is divided into multiple sub areas that can
distinguish the discrete positions (each button on the phone, or
sub-area).
Thank you,
Salchichasa

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer do not seem to have the capacity. Thanks!

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer to the PC in the classroom do not seem to work because of the file size. Thanks! Quincy

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Best way to make a DVD slideshow?

Similar Messages

Maybe you are looking for