Best way to make a SD DVD from an HDCAM project?

Hi,
I have a short film in FCP at HDCAM resolution that I want to make a SD DVD of. I want it to look as GOOD as possible. Got any tips on best way to do it? I'm familiar with DVDSP and Compresor/
I'd like to keep its aspect ratio the same and the sound mix the same as how it is in the HDCAM master
Thanks!

Generally
Edit in HD and either export self contained uncompressed or send timeline to Compressor to SD m2v settings (16:9) and make audio AC3. Some frame control modifications can also help.
Discussions of rates here Getting Content to Fit
Movie to use compressor

Similar Messages

Whats the best way to make a slideshow DVD

Hi, Finally I got my iMac the other day and have been playing around and trying to get the best out of it and was hoping to get some help from here. I have been playing with ilife on a friends mac for a while but never had a go in anger and now need some proper answers. Its quite simple. I create photo dvd slideshows and need to find the best way to do it. As far as I can tell there are a few ways. I can use imovie to get the running order - add the Ken Burns effects (that I DO need) - add music - add transitions and "share" to a .mov file and drag this into iDVD to put a menu on. Ok - this works but I get some MPEG artifacts (I know this is to be expected - I have been doing this for years on a PC). I can drag photos into iDVD but as far as I can tell I cannot have Ken Burns so this is out. I can use iPhoto to make a .mov file and again import this into iDVD. Am I missing something here? iMovie08 seems great and the .mov file is good enough quality to re-render in iDVD without losing too much quality so I guess this is the way to go but is there no way to go without rendering the .mov file and then going into iDVD? I have also used iMovie06 before and it had better transitions between photos - have these been lost in iMovie08?? I have set the quality in iMovie08 to "Profesional" but there stil seems to be a bit of artifacting. Should I try Toast?
Apologies for the long post but am really keen to get this sorted. I have posted before on here and got great responses but just want to get it right 100% before putting lots of effort in. I have next week off work to perfect the photos to DVD slideshow before I start to try to sell these things! many many thanks.Ben

I am still using my old 3 chip Sony TRV900 capturing to mindv tape and then importing that footage via FW into iM6 => iDVd'08. Frankly my own iDvd's look crisp and clean well over 90% of the time (But then again most my presentations are often under 60 mins duration in order to keep compression down to a minimum). They are well lit or often outdoors. And I avoid videotaping fast moving objects or panning the camera too quickly. I notice a significant quality shift (toward that of VHS quality ) if I shoot over 90-120 mins, & I often regret doing so since it requires the i-apps to work much harder and at times with marginal results.
The trick I think is to keep it short and sweet and to avoid higher compression rates.
That or move the video footage over to FCP => Compressor => DVDSP. But from experience I have found that anything over 90 mins. (regardless of the app I use) tends to look much like VHS quality..... disappointing to say the least in that jaggies begin to set in, and even tho I am using a 3 chip camera; color separation suffers greatly on a 2 hour standard DVD-R.
I do not yet shoot HD nor do I own a Blueray Burner which is the very next step many of us will require of apple if and when we are to burn HD to disc. At the moment it's simply not supported on most macs. To date Blueray has not been widely incorporated into most macs either thru i-apps nor thru apple's pro apps from what I have observed.

What's the best way to make a tribute DVD?

I wanted to make a DVD for my mom for her birthday. What is the easiest way to make a photo slideshow with music with short video clips? Can I make each section a separate slideshow in Iphoto with music and then just import that as a project into iMovie '09 and then string them together with short video clips in between?
Also, I am having different people send me videos. What video formats are usable with iMovie '09?

You might be better advised posting this in either the iPhoto or iMovie forum rather than here in iTunes. I think you are more likely to get relevant answers there as your question seems to be specifically about those programs.

What are the best settings to make an SD dvd from HD content?

I have HD material that i need to burn on a SD DVD with no real intention on playing in on an HD player, maybe an upconverting one. What are the best settings and preferences so it looks best when played on a CRT or HD TV?

Take a look here
http://discussions.apple.com/message.jspa?messageID=7167560#7167560
There is no one haard and fast rule on the video rate, but you can start with the standard 16:9 presets and go from there (adjusting fram controls and rates as needed)

Easiest way to produce NTSC DVD from PAL encore project?

I have a PAL Encore project with 25fps assets and subtitles. What's the easiest way to make an NTSC DVD from this project? Encore won't let me edit the quality settings to change from NTSC to PAL. These settings are greyed out. I take it they are dictated by the assets. Can anyone suggest how to make an NTSC project easily from this Encore project? I don't want to go back to the original footage. I want to just convert it from these Mpeg-2 files in the Encore project.
Any help would be much appreciated.

What Richard said. I'll add three things.
Encore won't let me edit the quality settings to change from NTSC to PAL. These settings are greyed out. I take it they are dictated by the assets.
They are dictated by your selections when you created the project. And NTSC vs PAL are not settings that can be changed in the project settings once created.
Regarding reusing menus. The files accessed by the Encore library for DVD projects are different for NTSC vs PAL. They have NTSC or PAL in the filename, but you don't see this from inside Encore. (They do not vary for Bluray menus.) You can take your NTSC project menus, "save as file," and then "import as menu" into a new PAL project. They will be the "wrong" pixel size and aspect ratio, but Encore may correct the par. I have never tried this. But if you get oddities doing it this way, in the new PAL project, add a PAL menu, edit in photoshop, and copy the button groups and such from the NTSC version of the menu to the PAL menu. That might work.
What I see in most of these "convert PAL from NTSC" threads is that virtually all NTSC disks play on current PAL equipment. Many users asking your question decide not to convert. that is especially true, because Richard's "export as NTSC" is not as simple as it seems.

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

What is best way to make disk backup of CS5 downloaded installation?

Hi,
We purchased the downloadable version of the CS5 Production Premium installer rather than waiting 2 weeks to receive it in box form.
What do you suggest is the best way to make a backup of the downloaded installers, which total about 13.8 gigs? I was thinking of putting the main one on a dual layer DVD-R but the biggest file is 9.23 gb's, nearly a gig over the data limit for dual layer disks. Is it possible to use Toast to split a disk image over multiple files or use Apple Disk Utility to compress the .dmg even further to fit? Or perhaps is the easiest way to just copy it over to a USB thumb drive?
I know Adobe allows you to re-download the software whenever needed, but it would be more handy for us to have a backup here rather than wait for another really long download...
Suggestions?
Thanks!

You can buy a set of backup disks from Adobe for a nominal fee. You might want to give them a call and ask about it.
Otherwise, just back it all up to an external drive.
Bob

Best way to make a slideshow for a wedding?

I am trying to make a slideshow for a wedding. What is the best way to make this?

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Best way to make a Constant Power Load

What would be the best way to make a load that always draws the same amount of power whatever the voltage on it. For exemple, an load would draw 100 mA at 24 VDC, 150 mA at 18 VDC and 200 mA at 12 VDC. All I found is to use Nonlinear Dependant source.
Any easier way to do this? Thanks.

Sorry about the file mix up, I was anxious to get it posted for you that I failed to realize you were using a different version.
As far as the last "amplifier" in your Leaky Feeder design, I actually hooked it up to the 24VDC supply on the left and this was a direct connect before the first resistor. I realize this is not what would be ideal for your application as probably you have only a certain place in the Leaker Feeder to tap off from. I would suppose this would be going into a different entry way off the main entry at an intersection so I do not know how my adjusting the placing of this would effect the results because it seems to me by doing this I have bypassed a bunch resistance in the Feeder cable itself (if that is what the resistors represent) and also bypassed a number of amplification stages in the process as well.
I will post a picture of my circuit for you to examine and try in Version 9. This is the only thing I could come up with to where the power draw was the same no matter what the voltage input was. The only thing I can see as a drawback is that with this circuit the current remains constant but the voltage fluctuates. If I use a 24V regualtor and drop the input voltage to 12V the current remains at approx 118ma but the voltage drops to 12V when I plug it into your circuit.. I will let you try it and see what you may be able to do with it.
Message Edited by lacy on 04-28-2008 05:47 PM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
Possible Constant Power Load.JPG ‏285 KB

Best way to create a conact list from the user profile properties

We have a customer looking for a phone book utility, starting with a table showing main user information and with some search options. We would like o base it on the user profile properties and not to create an indipendent studion record browser porlet.
What is best way to create a conact list from the user profile properties ?

I did something like this using search. It can get messy, so you need to take care with it.
* Identify the properties you want to make accessible to search (ex: name, etc.)
- add them to the user property map
- flag them as searchable
* I broke down and used the native server API. I'd still suggest this approach.
* Write some simple code to do vcard export if you like
(my code is all in vb.net)
I really believe this is the "right" approach, but honestly, this was a bit painful and has been
messy for us given some other business issues. (to my chagrin we have users with 2-letter last
names...)
I have code you're welcome to poke at, but it's more or less slapped together and has various
different search methods commented out so you can see how I tinkered w/ the remote vs. server
API.
If you'd like it mail me at [email protected] and I'll send you a zipped copy w/ a
readme. I hope it may be useful to you as both a starting reference.

Best way to transfer a 10g database from HP9000 to Linux Redhat?

What is the best way to transfer a 10g databasse from HP9000 to Linux Redhat?

Hi Bill,
What is the best way to transfer a 10g databasse from HP9000 to Linux Redhat?Define "best"? There are many choices, each with their own benefits . . .
Fastest?
If you are on an SMP server, parallel CTAS over a databaee link can move large amnunts of tables, fast:
http://www.dba-oracle.com/t_create_table_select_ctas.htm
I've done 100 gig per hours . . .
Easiest?
If you are a beginner, data pump is good, and I have siome tips on doing it quickly:
http://www.dba-oracle.com/oracle_tips_load_speed.htm
Also,, make sure to check the Linux kernel settings. I query http://www.tpc.org and search for the server type . . .
The full disclosure reports show optimal kernel settings.
Finally, don't forget to set direct I/O in Linux:
http://www.dba-oracle.com/t_linux_disk_i_o.htm
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference" http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

Best way to burn iMovies to DVD

I am looking for advice on the best way to get iMovies onto DVD. I have spent a lot of time reviewing discussions & answers already posted... probably too long as I am not getting anywhere!
I have built a movie in Movie 11 from AVCHD files (1080i) shot on a cannon SD card camera. This has been shared as a Large movie to me Apple TV1.. looks great.
I then shared the project to iDVD. The DVD produced was very poor. 'Jaggies' is a description I have seen in the discussions. Static horizontal lines are broken up & appear to move. I also included a pile of photos on the DVD as a slideshow. Just dropped in 100 high res Jpegs. Again, these appeared as very poor quality.
Exactly the same quality when using DVD+, DVD-, Memorex or Sony (now trying Verbatim).
I have tried dropping the movie into iDVD from Finder rather than sharing from iMovie. Same quality issue.
If I play the movie on my mac straight from Finder... it looks great. If I import it into iDVD (by sharing from iMovie or dropping in the file from media browser, you can see on the preview the jaggies are back
I created a disk image of the movie & burned to DVD... disk wouldn't play in the DVD player..
So, the question. What is the best way to get a movie produced in iMovie onto a DVD in terms of image quality. Have I missed a step in burning the disk image to a DVD?
Ideally, I don't want to use third party Apps. I have downloaded the trial of FCP. Will this handle everything in terms of movie production including DVD burn? I don't want to spend this sort of money, but if needs must..
Really grateful for any help & sorry for asking the largely the same question again!

Hi
Fully understands Your dilemma - BUT
• iMovie'08 to 11 - Can not deliver 100% full quality over to iDVD or any DVD authoring program as they all discard every second line in the picture when going from Event's to Project's. NO medicine known to me to heal this.
I use iMovie HD6 or FinalCut - as they can deliver 100% - interlaced SD-Video
• Video-DVD is as standard only - interlaced SD-Video and can never be any better
I created a disk image of the movie & burned to DVD... disk wouldn't play in the DVD player..
• You must use - Disk Util tool - to do this burn from .img file right ! Else the structure on Your DVD will not be a Video-DVD but a Data-DVD and as this it will NOT play back on any DVD-player.
I have downloaded the trial of FCP. Will this handle everything in terms of movie production including DVD burn?
• Yes - but not in as elegant form as iDVD are able to produce. But I'm told that the full 100% interlaced SD-Video quality is transferred over and used - so Your MOVIE will look as good as it's possibly. FOR FULL information and clever thoughts about this - ASK IN - FinalCut Pro-X forum - they know - I go on hear-say.
Yours Bengt W

Can I make a bootable DVD from the Mavericks download. I would like to wipe my iMac and start over.

Can I make a bootable DVD from the app store download of Mavericks. I wish to wipe my iMac clean and start over
thanks in anticipation

Well you can make a bootable dvd this way:
After downloading the Install OS X Mavericks.app file from the Mac App Store, run these 12 commands in Terminal to create a Mavericks.iso file and then burn it to a dual layer DVD with Disk Utility. You may then boot up from it by holding the option key down and then install mavericks. This will not install a recovery partition. To do that, uncompress and run the script file https://dl.dropboxusercontent.com/u/13872235/Musings/Recovery%20Partition%20Crea tor%203.7.zip
hdiutil attach /Applications/Install\ OS\ X\ Mavericks.app/Contents/SharedSupport/InstallESD.dmg -noverify -nobrowse -mountpoint /Volumes/install_app
hdiutil convert /Volumes/install_app/BaseSystem.dmg -format UDSP -o /tmp/Mavericks
hdiutil resize -size 8g /tmp/Mavericks.sparseimage
hdiutil attach /tmp/Mavericks.sparseimage -noverify -nobrowse -mountpoint /Volumes/install_build
rm /Volumes/install_build/System/Installation/Packages
cp -rp /Volumes/install_app/Packages /Volumes/install_build/System/Installation/
hdiutil detach /Volumes/install_app
hdiutil detach /Volumes/install_build
hdiutil resize -size `hdiutil resize -limits /tmp/Mavericks.sparseimage | tail -n 1 | awk '{ print $1 }'`b /tmp/Mavericks.sparseimage
hdiutil convert /tmp/Mavericks.sparseimage -format UDTO -o /tmp/Mavericks
rm /tmp/Mavericks.sparseimage
mv /tmp/Mavericks.cdr ~/Desktop/Mavericks.iso

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer do not seem to have the capacity. Thanks!

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer to the PC in the classroom do not seem to work because of the file size. Thanks! Quincy

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

Best way to make a SD DVD from an HDCAM project?

Similar Messages

Maybe you are looking for