BEST Way To Make Your Movie & It's Quality GREAT?

Hi,
I made a movie in i movie with a bunch of clips & alot of them were recorded using flip4 mac from nhl.com highlights. Then i used another program to convert that file to work in imovie. then i made my movie and compressed it to an .avi. I then burned it with toast 7, but the quality isnt the greatest...
My question is:
Is there any programs out or anything i can use to make my movie's quality the best of it's ability & look good on a SVCD on a tv? i dont care how big the file will be or how long it would take..Your help would be appreciated!

Hello PelicanSky,
unfortunately there's no easy way out. the quality of the endproduct depends on the source material, so if you want a DVD that looks nice you should have DV material to begin with. don't convert to many times, as each conversion will invariably LOWER the quality of the movie.
to start at the front end: you said you "recorded material". how exactly did you do that and what was the output file format?
as for the output: did your movie in iMovie look good? if so then don't export any files, but save and close iMovie. open iDVD and import your iM project. when you're done authoring, choose "save as disc image" from the file menu. next go to toast and burn the DVD using the "DVD from VIDEO_TS folder" option. burn at slow speed to make sure your DVD performs well.
good luck & viva la mela

Similar Messages

The Best Way to make your iPad battery last the longest!

After checking many sources and also discussions here -- this is one article that pretty much sums up the best way to make your iPad battery last the longest!
It basically comes down to JUST ONE THING (mainly) -- and that is simply REDUCING YOUR CHARGE CYCLE COUNT! And how do you do that? Well, very simply KEEP IT PLUGGED IN as much as possible. And then, doing what Apple says by doing just one full discharge - once a month.
There are about 1000 charge cycles available for the iPad, at which point you should have 80% of the battery life left. SO ... Anything you do to slow down getting to that 1000 charge cycles, makes your iPad battery last longer. Keeping it plugged in "all the time" (or, as much as possible - since it is a portable object) slows down the process of getting to that "lessening of battery capacity". It's simply all about "charge cycles" - which then translates into "reduced battery capacity".
Here's an article to pay close attention to:
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/

Here's another site that is usually posted here that you would be interested in: http://batteryuniversity.com

Best Way to Make A Movie From Many DVDs?

I'd like to make a montage of select scenes from 20+ DVDs of raw footage using Premiere Elements 7. I can't import all of these DVDs into the space I've got available on my hard drives. I'd appreciate any recommendations for the best way to extract select scenes from these DVDs into smaller media files that I can then import into a project for final assembly.
I can imagine an approach of putting a single scene into a sceneline and rendering it into an importable file type, but I'm not certain which type to use that won't reduce image quality along the way.
Of maybe there's some whole other approach I'm missing, ie using Archive.
Thanks!
JGW

JGW,
Thanks for the clarification and the details. A couple of thoughts:
1.) some of the hardware writers, similar to your deck, do not do the best job at writing to DVD-Video. Many have a rudimentary Menuing function built in. Since a .VOB can contain a lot of "stuff," besides just a multiplexed MPEG-2 stream, the way that they handle the construction can create problems, even for programs, like PE, that can Import and use a DVD-spec. .VOB. It is truely a "sometimes they work, but sometimes they do not." I do not know about the Toshiba. I do not even know about my Panasonic deck, as I have never had to try and work from one of its DVD's. They have always been an archival copy of a client's VHS, or similar. Both might do fine, but both might create poorly formed .VOB's. We'd both have to test this.
2.) while DV-AVI Type II does introduce a bit of compression (someday compare it's file sizes to a DV Uncompressed), it is visually slight. In the case of the MPEG-2's, that was where the quality took the hit. Going directly to DV-AVI will probably not be discernable from the MPEG-2 source files. Now, if you're going back to a finished DVD, remember that you'll be doing another MPEG-2 compression from PE (or most NLE's).
3.) one consideration for quality (at the expense of much more time) would be to do a recapture of your 8mm tapes. If one did this, it would require the camera, or a deck for those tapes. If the camera was a digital, even if the tapes were analog, and it connected via FireWire, PE might be able to do a perfect Capture. Again, one may, or may not loose "device control." If the camera was analog, then something like the ADS Pyro could do the work. Have to say that I doubt, but do not know, that one would have device control, but that's not a really big deal.
4.) there are other ways to rip a DVD. Here's a LINK to a workflow. It's certainly not the only way to do it, and this one is written around Adobe Encore, but should translate almost perfectly to PE, or PrPro.
There are also editing programs that use an MPEG-2 workflow and offer "smart rendering," which means that only footage, that has been altered, will be re-Transcoded to MPEG-2. Unfortunately, I use an exclusive DV-AVI Type II workflow and do not have a clue where to tell you to look for one of these programs. I'd guess that there are some freeware ones, and probably some inexpensive ones. I'm just not the guy to tell you anything about any of these.
As for external storage, the prices are getting amazingly low. On Friday, Fry's (Western states US) had a 1TB unit for US$89. I am ashamed to tell you what I paid for my first 1TB external. Even worse, you should see what I paid for my first 2TB RAID 5 NAS! FWIW, I have been a big fan of and have bought many of the Maxtor 1.5 and 2TB units. So far, not problems.
Steve, or Paul_LS might have some MPEG-2 to MPEG-2 editors for you.
Good luck,
Hunt

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

Best way to make a booklet?

What's the best way to make a booklet on my Mac? I need to make something that is 8 1/2 x 5 1/2 (so regular paper folded in half) allowing me to put 4 pages on one sheet of paper.
In the past, I've been able to make full sized pages, and make booklets via the copy machine at school (think music programs here) but someone recently told me there are ways to do this on a mac so that I could make as booklet and just bring to staples to print.
Any ideas would be greatly appreciated.

For starters, look at the "more like this" list on the right side of this page.
Then there is the answer I've used for several years.
1 - For a folded US letter-size booklet start with your Pages document in Legal size & larger than normal font size. Export the Pages document to a PDF & then drag the PDF to the icon of Cocoa Booklet. It will create a new PDF in booklet form. For international paper sizes, create the Pages document in the larger size with a larger font, i.e. create A4 pages to create A5 folded booklets. You can also use US tabloid or A3 to create larger booklets.
Next you'll need to use Create Booklet Service to create a booklet with any number of pages (best in a multiple of 4). You can create the booklet directly from the print dialog after you install the service. Again, for US letter size booklets, I find it best to create them in legal size as above. Downlond it from the link & run its installer. It will open the booklet in Preview. If you're using Lion, I suggest using File > Export to save the PDF where you can find it.
2 - This involves setting your Pages document in File > Page Setup… to landscape orientation & then paginating the document manually.
Use linked text boxes. This is easier done with the layout showing. First you need to add a page break to have two pages. Click in the body area & then Insert > Page Break. Now click outside the layout area to enter object mode & click the "T" in the tool bar or Insert > Text to create a text box & type something in it. This is to keep the box from disappearing if you click elsewhere & the text can be replaced later. If you already have some text to paste in you can just paste while in object mode & a text box containing your text will be created. You will now need to click outside the layout again & drag the cursor toward the text box to select it. You can now position the first text box in the lower right of your 2-page document. It is easier to see where it goes if you have the document set up with 2 columns. Click on the blue-outlined tab at the lower right of the text box to create a new of the same size & move the box to the upper left. Repeat for a box for the upper right & again for the lower right. You will now have 4 linked text boxes.
This will not let you automatically use page numbers because Pages "sees" each page & you actually have 2 pages per page. You'll need to create them manually. I would use text boxes.

Best way to make a slideshow for a wedding?

I am trying to make a slideshow for a wedding. What is the best way to make this?

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

What is the best way to make a DVD from iMovie

What is the best way to make a DVD from iMovie?
I am using iMovie 06 (Naturally) with iDVD 08. I have always used;
iMovie 06, File > Share to iDVD 08. And got pretty good results.
Some say the best way is to quit iMovie 06, open iDVD and import the movie from the Media button.
I have tried both methods in the results look the same. I'm interested in getting the very best quality possible.

You likely have one of the most expensive media converter boxes on the market today.
But does it work well with most macs? (my guess is that it does). But more specifically can it "handshake" with an intel based mac? I personally haven't tried it.
But you may want to read this for yourself if you haven't already:
http://discussions.apple.com/thread.jspa?threadID=1179361&tstart=2362
Assuming it works then the best format is .dv which this unit will support apparently.

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

Best way to make a Constant Power Load

What would be the best way to make a load that always draws the same amount of power whatever the voltage on it. For exemple, an load would draw 100 mA at 24 VDC, 150 mA at 18 VDC and 200 mA at 12 VDC. All I found is to use Nonlinear Dependant source.
Any easier way to do this? Thanks.

Sorry about the file mix up, I was anxious to get it posted for you that I failed to realize you were using a different version.
As far as the last "amplifier" in your Leaky Feeder design, I actually hooked it up to the 24VDC supply on the left and this was a direct connect before the first resistor. I realize this is not what would be ideal for your application as probably you have only a certain place in the Leaker Feeder to tap off from. I would suppose this would be going into a different entry way off the main entry at an intersection so I do not know how my adjusting the placing of this would effect the results because it seems to me by doing this I have bypassed a bunch resistance in the Feeder cable itself (if that is what the resistors represent) and also bypassed a number of amplification stages in the process as well.
I will post a picture of my circuit for you to examine and try in Version 9. This is the only thing I could come up with to where the power draw was the same no matter what the voltage input was. The only thing I can see as a drawback is that with this circuit the current remains constant but the voltage fluctuates. If I use a 24V regualtor and drop the input voltage to 12V the current remains at approx 118ma but the voltage drops to 12V when I plug it into your circuit.. I will let you try it and see what you may be able to do with it.
Message Edited by lacy on 04-28-2008 05:47 PM
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day
Attachments:
Possible Constant Power Load.JPG ‏285 KB

What is the best way to make a clickable grid

What would be the best way to make a clickable area that can
differentiate between discrete parts of the area when clicked on.
In other words, instead a having multiple buttons in a row that the
user can click on, is there a way to have an area that has lines to
distinguish the different areas(buttons) but that acts as though
there were multiple consecutive buttons?
For example, if I wanted to graphically simulate the buttons
on a phone but without using buttons. Instead use some kind of grid
or area that is divided into multiple sub areas that can
distinguish the discrete positions (each button on the phone, or
sub-area).
Thank you,
Salchichasa

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

Advice on best way to structure flash movie

Hi,
I'm a little mixed up on the best way to approach this movie I need to make. Basically it includes a loading screen, some narrative sections, and a few interspersed interactive sections (a couple of quizes and some forms to fill out).
I'm thinking because of the complexity I should seperate it into "scenes" but my understanding is scenes are bad, so I'm thinking I should be using movie clips for each major section?
I also want to have a controller for skipping forward and backwards, so let me see if I have this correct.
Would I have one master timeline with all my actionscript and what not and my navigation controller, and would each major section of the animation be a movieclip that would be trigger by a frame in the master timeline?
I pretty much have the whole thing storyboarded out, I'm just wondering the best most efficient way to do it.
One other question: is it bad practice to have a raster visual asset with an alpha based mask on the main timeline that overlays on top of all the nested clips? For example I have a "frame" with is an png with a abstract white border with the middle masked out that remains static throughout the entire movie. Or am I better off applying it to each movieclip.
Thanks.

It will probably be easier to manage if you make each section a moiveclip by itself, That way you aren't always manipulating the main timeline to fit in or adjust for changes in each section. You can either spread them out along the timeline, using frame comands to navigate to the different sections, or you can have them all in one frame and control navigation by controlling the visibility of each section.
If the frame you mention is to be applied to each section, then having one on the main timeline to cover all would be easier to manage in most cases.

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer do not seem to have the capacity. Thanks!

What is the best way to make a 30 minute video lecture taken with my iPad available to my university class? Email and USB transfer to the PC in the classroom do not seem to work because of the file size. Thanks! Quincy

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
 Cheers, Tom

What is the best way to make a program fit different monitor resoultions?

In our lab all our test stations have 1280x1024 resoultion monitors. In the "other lab" all the test station monitors are 1440x900 resoultion.
Now I am tasked with making my programs run on the test stations in the other lab. I have tried setting the options "maintain proportions of windows for different monitor resoultions" and "Scale all object on front panel as the windows resizes" and of course neither one of these options really does what I would expect it to do.
What is the best way to make programs fit different monitor resoultions?

J-M wrote:
I resize the Front Panel when the program start to fit the monitor resolution. After that, I use the "SBE_Determine If Screen Resized.vi" from TomBrass (http://forums.ni.com/t5/LabVIEW/Resizing-controls-on-a-tab-control-within-a-pane/td-p/1520244 ). This vi is very useful if you don't want to monopolize the CPU with the "Panel Resize" event.
I don't like this function for a couple reasons. First for the example you don't need any custom code to handle the window resizing, just use a couple splitters. Even if you did need to handle the resize, you only resize after the mouse is up after the resize which is not how normal Windows programs work they resize as the mouse moves. So I modified the VI to resize objects as you resize the window. Then because doing this can generate 100 events very quickly, I use a boolean in a shift register to make sure that we only handle the resize event if there is no new resize events after 0ms. This essentially makes a lossy queue and handles the last resize event.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Resizable_Graph.vi ‏22 KB

How is the best way of keeping your macbook pro battery healthy

what is the best way of keeping your macbook pro battery healthy there are so many ways what is the best way?

Read these two Apppe articles:
http://http://www.apple.com/batteries/notebooks.html
http://support.apple.com/kb/HT1446
I generally keep my MBP connected to AC as much as possible and try to make certain that at least monthly I run it on the battery to about the 40% charge level.
Ciao.

What is the best way to make certain cost centers as REQUIRING an internal

Hello,
What is the best way to make certain cost centers as REQUIRING an internal order (when entering invoices in the accounts payable module u2013 transaction code FB60). At the present, if a cost center requires an internal order, and the employee who is is entering the invoice in FB60 forgets to include the Internal Order, the invoice is incorrectly costed.
Regards,
Saeed

Hai !!!
The below method can solve your problem
1.Create Internal order for each cost center from transaction code KO01 - Create and enter the cost center under Requesting CCtr
2. Enter internal order or costcenter / while user post the transaction
Example Fb60
Regards
shamul heq

BEST Way To Make Your Movie & It's Quality GREAT?

Similar Messages

Maybe you are looking for