Best way to mark data that has changed when it is edited in  a spark datagrid?

I am not sure if this is the best way to mark data that has changed (isModifiedClientSide ) when it is edited in  a spark datagrid:
<GridColumn  width="140" headerText="Margin "dataField="margin" editable="false"  editable.editMode="true"  >
                    <itemRenderer>
                        <fx:Component>
                            <DefaultGridItemRenderer textAlign="right"   background="true" backgroundColor="#ffffff"  alpha="1.0" color="#000000" >
                                <focusOut>
                                    <![CDATA[
                                    this.data.isModifiedClientSide = 1;
                                    ]]>
                                </focusOut>
                            </DefaultGridItemRenderer>
                        </fx:Component>
                    </itemRenderer>
                </GridColumn>

I tried this but the value commit doesnt't get fired bro:
    <GridColumn  width="140" headerText="Margin (disabled)" headerText.editMode="Margin (editing)" dataField="margin" editable="false"  editable.editMode="true"  >
                    <itemEditor>
                        <fx:Component>
                            <DefaultGridItemEditor>
                                <valueCommit>
                                    <![CDATA[
                                    this.data.isModifiedClientSide = 1;
                                    ]]>
                                </valueCommit>
                            </DefaultGridItemEditor>
                        </fx:Component>
                    </itemEditor>
                </GridColumn>
what do you think?

Similar Messages

  • Best Way to Load Data in Hash Partition

    Hi,
    I have partitioning by Hash on a Large Table of 5 TB. We have to load Data say more than 500GB daily on that table from ETL.
    What is the best way to Load data into that Big Table which has hash Partition .
    Regards
    Sahil Soni

    Do you have any specific requirements to match records to lookup tables or it just a straight load - that is an insert?
    Do you have any specific performance requirements?
    The easiest and fastest way to load data into Oracle is via external file and parallel query/parallel insert. Remember that parallel DML is not enabled by default and you have to do so via alter session command. You can leverage multiple CPU cores and direct path operation to perform the load.
    Assuming your database is on a linux/unix server - you could NFS load the file if it is on a remote system, but then you will be most likely limited by network transfer speed.

  • Best way to move data and programs to another profile on same Mac?

    Hello,
    What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
    Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
    Thanks for your help!
    Johnathon

    This usually means that a configuration or preference file is corrupted.  In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
    I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
    See if the problem is resolved in the user's normal account.
    It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved.  The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

  • Best way to hold data

    Hiu guys,
    I would just like to know your opinions on the best way to hold data.
    The data is in the following form,
    ProcessNo PageNo
    eg
    0 0
    0 4
    0 3
    1 5
    1 4
    etc
    I was thinking of using a two dimensional array but would it be better to use a linked list or an other way? Can you store two items in the same list position?
    Thanks in advance

    I would add something to what the previous poster said.
    You could also make it an example of a Property Bag pattern and abstract the properties to a container (for example a Hashtable) which would allow you to expand the property list more easily. As with most things, there's an up side and a down side. The up side being that if you get new properties, or have to take properties away you can do so more easily (with less invasion of the existing code). The downside being that there's a bit more work to do at the start.
    The question to ask is how much of this do you have to do? If you're only doing it for example for homework and you won't be using it any more, it's not worth the effort. Likewise if your property list won't ever (or hardly ever) change it becomes less workable unless you have lots of them to do. But if your environment is more volatile or you have lots of it to do for your project it becomes a viable way of doing things.

  • What is the best way to be sure that there is no virus

    Hi guys,
    thanks for your responds,
    I believe my laptop has a virus or spyware. It is slow and take ages to comes up. Also during using internet exploring it is very slow in internet browsing.
    During use of msn chat voice sometime it freeze.
    What is the best way to be sure that there is no virus.
    I already have Norton 2007 with the latest update.
    thanks

    Hi
    > What is the best way to be sure that there is no virus?
    The best way is to use an Antivirus application and some Anti malware and Trojan applications.
    You use already the Norton Antivirus program. This is great. Be sure that this application is always up-to-date.
    Additional you could install Adaware. This is freeware tool and it scans your OS for malware.
    But the virus or malware is not always a reason for an OS freezing.
    Please check your processes which are running in the OS background. You can use additionally the application called CClean.
    It scans you OS for troubles and repair the registry.
    Maybe it helps

  • When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID  and also on r PC it has only his info none of mi

    To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone.  When you delete the account you will be given the option to either keep or delete the iCloud data from your phone.  This also, only deletes the account and the iCloud data from your phone, not from iCloud.  Your husband's phone won't be effected by this.  Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
    If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account. 
    If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls.  To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID.  Then do the same thing in Settings>FaceTime.

  • Best way to import data to multiple tables in oracle d.b from sql server

    HI All am newbie to Oracle,
    What is the Best way to import data to multiple tables in Oracle Data base from sql server?
    1)linked server?
    2)ssis ?
    If possible share me the query to done this task using Linked server?
    Regards,
    KoteRavindra.

    check:
    http://www.mssqltips.com/sqlservertip/2011/export-sql-server-data-to-oracle-using-ssis/
          koteravindra     
    Handle:      koteravindra 
    Status Level:      Newbie
    Registered:      Jan 9, 2013
    Total Posts:      4
    Total Questions:      3 (3 unresolved)
    why so many unresolved questions? Remember to close your threads marking them as answered.

  • What is the best way to transfer data from a PC to an iMac?

    What is the best way to transfer data from a PC to an iMac?

    If you know how to set up a computer-to-computer Ethernet network, then you can give that a try, but a hard drive will be faster than Ethernet unless you don't have a lot to transfer.
    Mac OS X 10.6 Help- Creating a computer-to-computer network

  • Best ways to view data, total records of an application table ie VBAK

    Hi all,
    What is the best way to view data of an application table in the source system?
    I know about SE16....but are there other ways to know details ie the total no of records and different field information about a
    application table ie VBAK in source R3?
    Also, using SE16 when i checked for VBAK and clicked on the "number of enteries" then it showed 0...however
    when i directly checked from the sqlplus then i found about 5000 records in there in VBAK. I am not sure why
    via SE16 it showed 0. Does anybody have any idea what i missed here?
    Thanks...will give points for ur input.
    ak

    I tried "number of enteried" on se16 and it shows 0 enteries without any selection criterion...i cheked by putting relevant time range as well but it shows 0...
    As i told that when i checked VBAK separately via logging to database directly then i did find 5678 rows there.
    Please note that this is a new demo version....so i thought that i first need to activate the table which i did using tcode SE11. Now the VBAK table is active but still via SE16 shows 0 nuber of enteris....
    Can anybody please advise here..
    Thx
    ak

  • Best way to read data sources in parallel

    Hi,
    I'm looking for conceptual help as I start a project. I am trying to figure out the best way to get data from several sources at different timings and deliver them to a main vi.
    I have 4 systems, which each work well on their own (OK, one doesn't work yet, but let's assume that can be fixed
    One system reads from 2 pH meters on serial ports. The meters are slow to respond, so it takes about 2 minutes to read 4 channels of data. I save these data to a file every 10 minutes
    One system reads from a CO2 meter on the USB port. It reads the data every second, and does some averaging. Every 2-10 minutes, it saves the average to a file and then sends a command to the parallel port to switch the input to the meter.
    The third system reads from 6 valves, each on a serial port. These also take time, probably several minutes to poll all 6. These data will also be saved to a file.
    The 4th system reads a bank of temperature probes on the USB port. These get polled every few seconds and saved to a file every few minutes.
    Now that these individual routines are working, I am trying to create a front end that will display all the data in one place and allow me to set all the parameters from a single place. I would also like the possibility of using the data from one source at another place (for instance, having the output of the temperature probes sent to the pH meters to adjust their calibration). At this point, I get confused as to the best way to proceed.
    It seems like if I just want to read the data from each source, I could simply put all 4 routines together in a single vi (oh, what a mess that would be to read). Maybe I should start this way?
    However, if I want to have any communication between the different data sources, it seems like I will either need to use queues or VI server. I sort of envision a vi that lets me configure the various ports and the file operations and then can turn on monitoring of any or all of the various inputs. Each of them will do their thing at their own time and the main routine will simply display whatever data they deliver whenever they have new data. Fortunately, nothing is particularly time-critical, nor does it need to run fast.
    My questions: Am I correct in how I'm thinking about getting this to work?   Is there a clear choice between queues or vi server? I've looked at several examples of each, but without having done something like this before, it is hard for me to tell which is better.
    Thanks for any suggestions.
    mike

    Hi Mike,
    I think that you are on the right track with your thinking process. You might be able to implement this using queues. I'm not exactly sure how you would do it with VI server since it is just a set of functions that allows you to dynamically control front panel objects, VIs, and the LabVIEW environment. However, there are some great resources available with using queues for this type of application. I'm including the link to another discussion forum that had a very similar question to yours. There is a good example of using queues within this forum post. Also, there is a great example in NI Developer Zone about using queues and some other good ones in the NI Example Finder (just search 'queues' and you should get a few results). I hope this helps!
    Carla
    National Instruments
    Applications Engineer

  • Best way to pass data sets to another program

    Hey
    I want to connect another (maths) program with my java application. Therefore I need to paste data (some kind of tab separated table) to this program.
    I try now to save these data in a separate newly generated file and to pass a command with Java's Runtime.exec() method to this program to read these data. Is this a good idea or might there be better ways?
    If I do so, is there a way in Java to generate some kind of a "temporary" file which will be deleted automatically after usage or is this nothing else than to save it in a common file and delete it afterwards. What's the best way to pass data generally?

    Well, the connection will not be over a network, so I'd rather think it's not a Socket or RMI problem (unless someone convinces me).
    Yes it's very external, it's a C or C++ written program, I don't have any source codes. So far I generated a file for Input command and data, I passed that on to the maths program and returned the output into another file.
    Now I would like to separate the output and like to obtain some tables and graphical things like charts at the output. Do I have to generate three different types of outputfiles? How to store some graphics e.g. some distributions. I thought even of generating a database. I never thought about XML, I don't know if this works for that kind of problem?!

  • Best Way to Save Data

    Hi all, I'm relatively new to Java, and have a quick question.
    What is the best way to save data in an application, and what is a good rule of thumb when to dive into a database to hold the information. For example a directory of people and their information. I want the program to be able to add/update/delete the information with ease.
    I was reading in Core Java Vol II how to save object data to a file, but it seems tedious if I have to run through a list of objects and save each one. I just want to be able to save records, and retrieve them to edit later.
    Thanks in advance,
    \\//

    UnknownSector wrote:
    Hi all, I'm relatively new to Java, and have a quick question.Hy there, when you find some time, go read [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html], it will help you in the future.
    What is the best way to save data in an applicationThere is almost never a "best way" to do anything. At least not if you don't define your requirements exactly. It depends on tons of things, that's why there are so many ways to "save data".
    Writing to files and saving to databases are just two of those, and even among those, there are thousand of different ways to handle it.
    , and what is a good rule of thumb when to dive into a database to hold the information.When the data is structured and you want to do queries on it, then you can probably look into a database. When the data is structured and you've got lots of it, then you really should look into databases.
    For example a directory of people and their information. I want the program to be able to add/update/delete the information with ease.Too little information, but I'd tend to go with a database. But then again, I'm going for a DB rather quickly.
    I was reading in Core Java Vol II how to save object data to a file, but it seems tedious if I have to run through a list of objects and save each one.I don't know what exactly you're talking about. Are you talking about serialization? What makes you feel that it is tedious? Can you describe it?
    I just want to be able to save records, and retrieve them to edit later.Well, that can be done in many, many ways. That alone doesn't force you to go one way or another. It's pretty much the definition of "save data".

  • Can I retrive data that has been wiped out because I forgot my password?

    Can I retrive data that has been wiped out because I forgot my password? I tried my password 10 times and forgot it and it wiped everything out when I finally remembered my password and logged in. Is there a way to retrieve the data?

    Sorry, but password to what? Where is this "data" you wish to recover?

  • Using LabView version 6.1, Best way to capture data every 5 milliseconds

    Best way to capture data every 5 ms (milli-seconds) in the .vi diagram when using "Time between Points, and Small Loop Delay tools"

    I have no idea what "Time between Points, and Small Loop Delay tools" is. If this is some code you downloaded, you should provide a linke to it. And, if you want to acquire analog data every 5 milliseconds from a DAQ board, that is possible with just about every DAQ board and is not related to the version of LabVIEW. You simply have to set the sample rate of the DAQ board to 200 samples/sec. If it's digital data, then there will be a problem getting consistent 5 msec data.

  • My laptop screen when black now it will not turn on or off. And is there a way to see everything that has been done to my laptop at a apple store?

    My laptop has been in the apple store to be fixed more times in the past 2 years then you could imagine. They just replaced a defective wire in it, and hardrive not even a month ago and now the screen just went black and wont turn back on. Also is there a way to see everything that has been done to this laptop through the apple store?

    If I were you I would call Apple Customer Relations (800) 767-2775.  Tell them exactly what you stated in your post in a polite way.  See what they can do for you.
    Nickc111209 wrote:
    is there a way to see everything that has been done to this laptop through the apple store?
    Yes.  And also on Apple's repair history website.

Maybe you are looking for