Best way to merge multiple reports

I have 8 reports based on the same database table. However, each one's record selection filter is different.
I would like to try to merge these into fewer reports, ideally one report.
I know I could create 1 report with 7 subreports, but I am concerned this may be sluggish and/or crash.
Are there any other options?

Each report is actually a crosstab. Would I still be able to make this work?
Crosstab1 - Shows total amount of Medicare payments per doctor/year
Crosstab2 - Shows total amount of All payment types per doctor/year
Crosstab3 - Shows total amount of Medicare payments for drugs per doctor/year
And so on...
Looks something like this:
Total Amount of Medicare payments per doctor:
Dr. Doe
Dr. Smith
Dr. Davis
Dr. Brown
2014
2000
1725
1836
3000
2015
300
211
287
310

Similar Messages

Best way to merge multiple iPhoto libraries from several external hard drives into one, while deleting duplicates?

Problem: My wife and I both have MacBook Pros (MBPs). We take a lot of pictures and import them into iPhoto. When the storage capacity of our MBPs gets full, I have been moving our iPhoto libraries into external hard drives, which are now multiple (3 or 4). The problem I now realize we have been making, is that once the iPhoto libraries were copied onto the external hard drives, we were only deleting about half of the photos in each iPhoto library remaining in our MBPs (because we wanted to keep some of the important ones in our hard drives). Once the storage capacities of our MBPs got full again, I would repeat the whole process again and again. In essence I now have several large iPhoto libraries (each about 80 GB), each with multiple duplicate photos, divided among several external hard drives. And I am running out of space on my hard drive again. So what is the best way to:
a) merge all of these iPhoto libraries into just one, while simultaneously being able to delete all the duplicates? (or would you not recommend this?)
b) prevent this from happening again?
Thanks. BTW I am using OS X Mountain Lion 10.8.5 and iPhoto 8.1.2 (2009)

If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($30) version of iPhoto Library Manager
The Library Manager app can be set avoid duplicates.

What is the best way to produce different report types out of the same SSRS Report

So I have a request to produce different report types based on a "Line Of Business" Parameter that is provided. I know that SSRS sometimes struggles with gathering the Metadata based on IF Statements.
What is the best way to provide multiple different report types with different data based on the "Line Of Business" Parameter that is provided? Can I simply do this via the SQL Stored Procedure? And how so that the Metadata is collected correctly?
Just don't know what the generally accepted business principle is on this and how to go about doing it.
Thanks in advance for your review and am hopeful for a reply.

Hi ITBobbyP,
Per my understanding that you have create an parameter (Line Of Businiess) to get diffetent types of report, I would like to confirm with you want do you mean about the different report types?
Is that mean you have table and one column named Report type, you want to filtered on this column? Or the report type you mean is like Parameterized reports,Linked reports,Snapshot reports,Subreports and so on.
If want you want is through the selection of the parameter to change the report type(Parameterized reports,Linked reports,Snapshot reports,Subreports ..),currently it is impossible to acheive this.
If you still have any problem, please try to provide more details information about your reqirements, the sampe data in the table, the report structure you have designed and so on.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Best way to achieve multiple paths with quizzes using Captivate 6?

I’m looking for the best way to achieve multiple paths and quizzes using Captivate 6.
Here is the scenario: The learner watches general slides 1 – 3 and then chooses between Path A, Path B, or both paths combined. If they choose Path A then they watch the A portion only and take the A Quiz only. Same happens for Path B and for the two paths combined. The learner would only have to go one path to complete the course.
What I’m finding is Captivate only has one Quiz results page (even if you create two separate quizzes, it merges them). I was trying to avoid having three separate projects for the same module to keep it simple. I see if I have three separate projects I could use the Multi-SCO Packager to merge them for use on my Moodle LMS. But wait, I don't have the elearning suite, so I don't have access to the Multi-SCO Packager...
My question is: What is the best approach way to accomplish this goal? Any recommendations?
Message was edited by: austingina

Captivate 6 has Branch Aware quizzing. Turn on that option in Quiz Settings and then your Quiz Results page should only show results for the branch your user visits.

Best Way To merge Customer Records

Hi community,
What is the best way to merge customer records for the same operson but may have used different email ids to correspond with BC Website

Not in BC no. You would need to export a custom report, sort that in excel and then form that into the customer import it back in or create some API that goes through and cleans that up.

What is the best way to sync multiple collections of contacts among multiple users?

(I originally submitted this question under the "Mac OS X Technologies" section, but got no response. I'm submitting a duplicate here because this is where all the smart folks are! My apologies that my question is only partially related to OS X Server . . . )
What is the best way to sync multiple collections of contacts among multiple users on iOS and OS X?
For example, suppose I have three collections of contacts: Bob's, Sally's, and Common. I want Bob to be able to access and sync Bob's contacts and Common contacts, and Sally to access and sync Sally's contacts and Common contacts. Bob and Sally never need to access or sync each other's contacts. Bob and Sally would both sync and share contacts in Common.
How would I best implement this? It's my understanding I have three options for managing contacts across iOS and OS X: 1. iCloud accounts, 2. Install OS X server, or 3. Install and manage Darwin CardDAV directly. Which method would best support what I wish to do?
I am a seasoned Unix geek well versed in the terminal, so I am prepared to get my hands dirty as much as necessary to achieve what I want. Also, it is sufficient if syncing takes place over WiFi on the local network, in fact, that is desirable versus syncing over the cloud.

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

What is the best way to call a report from within a report

What is the best way to call a report from within a report(master / Detail concept)
A type of drill down report
Oracle Database 10g
Forms 10.1.2.0.2
Report Builder 10.1.2.0.2

Hi
Have a look in this link, certainly you will get fix, if not just post a comment on blog, will get reply soon
http://windows7bugs.wordpress.com/?s=oracle+10g+bug

What is the best way to merge a file content into log file

What is the best way to merge a file content into log file.
In worst case, I will read the file line by line as string, then use
logger.info(lineString)to output to log file.
However, is there better way to do this?
The eventual log file will be something like:
log message 1
log message 2
content from file line 1
content from file line 2
content from file line 3
log message 3
log message 4Thanks

John618 wrote:
Thank you and let me explain:
1. What do you mean by better?
I would like to see better performance. read line by line and log each line as string can be slow. Did you measure this and determine that it is actually a problem for your application? Or are you guessing?
Regardless of what you do you are still going to need to read the file.
>
2.The only better way I can think of is not having to do it, but I assume you have a very good reason to want to do this.
Yes, I have to do it beacuse the requirement is to have that file content be part of logging.
Any idea?How is it supposed to be part of it? For example which of the following is better?
        File AAA - contents
                   First Line
                   Second Line XXX
        Log 1
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: First Line
                2009-03-27 DEBUG: Second Line XXX
                2009-03-27 DEBUG: Random following line
        Log 2
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: ----- File: AAA -------------
                First Line
                Second Line XXX
                2009-03-27 DEBUG: Random following lineBoth of the above have some advantages and disadvantages.
The first in a mult-threaded app can end up with intermittent log entries in between lines, so having log lines with thread ids becomes important.
The first can be created by reading one line at a time and posting one at a time.
The second can be created by reading the entire file as a single string and then posting using a single log statement.

Best way to merge photos from different macs

What is the best way to merge photo libraries from different macs onto one mac?

The only way to merge Libraries - versions, metadata etc - is with the paid ($20) version of iPhoto Library Manager
Other than that you will need to export from one Library to the Finder and then import to the other. This won’t get all the Metadata (for instance, Faces) and won't get the Versions either.
Regards
TD

What is the best way to manage multiple ipods using the same itunes?

Hi Everyone
i am trying to manage three different ipods through the one Itunes, all with very different tastes, not sure if I am doing it the best or easiest way so does anybody have a simple solution on what you're supposed to do, to keep it all simple!
Cheers
Liv

If you have created a new Windows user account you need to log out and then log back in with your original user name. By default each Windows profile will have an independent iTunes library.
If instead you managed to create a new library within the same profile. click the icon to start iTunes and immediately press and hold down the shift key, keep holding until asked to create or choose a library. Click Choose and navigte back to your original which should be at <User's Music>\iTunes.
Your question as posed was:
What is the best way to manage multiple iPods using the same iTunes {library}?
in which case Selected Playlists is probably the best approach. Simply create a playlist for each device, Alice's iPod, Bob's iPhone etc. and sync the device with the appropriate list.
tt2

__Is there a way to 'merge' multiple curves into a single curve?

__Is there a way to 'merge' multiple curves into a single curve?
By this I mean I have file with 2-12 curve layers - I wanted to 'merge' the curves so that I can end up with a single curve with the attributes of many. Maybe is there a script that would do this?

I don't mean to be critical, but how do you get to a situation where you have 12 successive Curves layers?
The advantage to a Curves layer is that you can adjust and re-adjust it to your heart's content.
If you're habitually adding new Curves layers one over the other, maybe you should re-evaluate your process of working... Perhaps the way you're thinking you should just work at a high bit depth and do repeated Curves operations on the pixels? Or put some time into retraining yourself to not add a new Curves layer but to manipulate the one that's already there. There are some nice new enhancements (e.g., the "finger" subtool that allows you to choose a spot in the image and manipulate that part of the curve).
Again, I'm not trying to criticize you, just looking to see if maybe there's a way to avoid getting to the point where you need to combine Curves in the first place, since there's no direct "Merge Curves" capability, outside of just stamping a set of image and adjustment layers into pixels. For completeness I suppose I should mention how to do that... You can Stamp any combination of visible layers into a single layer of pixels (effectively combining all the Curves layers et. al.) by pressing Control - Shift - Alt - E.
-Noel

Best Way to Aggregate Multiple Announcement Apps and Possibly External RSS Feed

Hello,
I have two separate announcement apps (one in sub-site A, and one is sub-site B). I am trying to create a webpart that will display content from both apps together.
I have tried to setup a CSWP and have been able to set the query to pull in the data (Although it shows expired announcements, which I would need to eliminate). Now, I am trying to customize the display of the CSWP, including the property mapping values
to display the announcement title (currently working with the URL as a link) and body (truncated like the announcement summary view if possible).
How can I get the body from the announcement to display? The 'body' field isn't listed as an option in the drop down list of mapping values. Do I need to toggle an option on the separate announcement apps, create a column, map a field, or some combination?
Also, I'd like to know if it is possible to add in an external RSS feed. Or, if there is a completely different way to approach and accomplish this, please let me know.
Thank you

Hi,
To display the “Body” field of Announcements list properly in Content Search Web Part, you can take a look at this blog about how to customize the display template for a good
start:
http://social.technet.microsoft.com/Forums/en-US/bf0eb4de-445f-435a-8c88-1826bfb3aae5/best-way-to-aggregate-multiple-announcement-apps-and-possibly-external-rss-feed?forum=sharepointdevelopment
If there are more complex needs in customization, the two links below would be helpful:
http://blogs.technet.com/b/sharepoint_quick_reads/archive/2013/09/03/3588171.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/05/28/stage-11-upload-and-apply-display-templates-to-the-content-search-web-part.aspx
Also, if you have several questions, it is recommended to post them in each single thread to make others in this forum easier to focus on one issue in one thread.
Best regards
Patrick Liang
TechNet Community Support

Best Ways to Handle Multiple Users

First post....heres my question. Can anyone help me determine the best way to handle multiple users in itunes? Some Background:
My family shares one computer. We have on folder on the hard drive where we keep all our music files. I got an ipod and itunes and added some of the music to itunes and have pretty much used itunes for my music.
Now my girlfriend got an ipod and I am hoping to somehow keep her music away from mine so to speak. So that I can keep synching my ipod without adding a bunch of music I dont want.
Is there a way to handle this? So thankfull for any help!

There is an apple article on this here:
http://docs.info.apple.com/article.html?artnum=300432
It sounds as though method 1 would be best for you.
Also see how to keep the music files in one place to avoid duplication:
http://docs.info.apple.com/article.html?artnum=93195

Best way to merge two i photo libraries

I have ended up with two versions of i photo on the same laptop - just stored in different places. One has 30K photos and the other has 80K photos. What is the best way to merge the two photo libraries as whenever I try to do it - it ends up crashing.

no sure how you are doing it - the only way is to use the merge capability of iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/
LN

What's the best way to merge, restore or reconstruct iPhoto and Aperture libraries to resolve images that are not found/offline?

Hey there, Apple Support Communities.
To start, I'm working on a MBP Retina 15" with a 2.3GHz i7 processor and 16 GB of RAM. 10GB free on a 256GB SS HD. Attached are two external HDs - one 1TB Western Digital portable drive from 2011, one 2TB Porsche LaCie non-portable drive from 2013; both connected via USB. All photo libraries in question are on the external drives.
I have Aperture 3.5.1 and iPhoto 9.5.1. I prefer to work in Aperture.
The Issue(s)
Over the years, I have accumulated a number of iPhoto libraries and Aperture libraries. At one point, I thought my WD drive was dying so I purchased the LaCie and copied all libraries over the the LaCie drive. (Turns out, there's probably an issue with my USB port reading drives, because I can once again see the WD drive and occasionally I can't see the LaCie drive.)
So now I have old version of some libraries on the WD drive, and new versions on the LaCie drive.
When I was moving things, I ran the software Gemini to de-dupe my iPhoto libraries. Not sure what effect that may have had on my issues.
In my main Aperture library and in some iPhoto libraries, I get the image-not-found badge or exclamation point. I've dug through the hidden Masters folders in various libraries to find the original image. In some cases, I have been able to find the original image, sometimes in a different version of the iPhoto library.
My Question(s)
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
2. For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
3. Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
TL;DR: Too many iPhoto and Aperture libraries, and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
Thank you! Let me know if you need add'l info to offer advice.
With appreciation,
Christie

That will not be an easy task, Christie.
I am afraid, your cleaning session with Gemini may have actually removed originals. I have never used this duplicate finder tool, but other posters here reported problems. Gemini seems to replace duplicate original files in photo libraries by links, and this way, deleting images can cause the references for other images to break. And Aperture does not follow symbolic links - at least, I could never get it to find original files this way, when I experimented with this.
1. For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
You have to find the originals yourself. If you can find them or restore them from a backup, Aperture can reconnect them. The reconnect panel can show you, where the originals are supposed to be, so youcan see the filename and make a Spotlight search.
For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
Make a copy of the missing original you found in a folder outside the iPhoto library. You can either open the iPhoto library in Aperture and use "File > Locate Referenced file" to reconnect the originals, or simply reimport them. Then Lift&Stamp all adjustments and metadata to the reimported version.
See this manual page on how to reconnect originals: Aperture 3 User Manual: Working with Referenced Images (the paragraph: Reconnecting Missing or Offline Referenced Images)
Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
References images will stay referenced, managed will remain managed. You need to unhide all hidden photos in iPhoto - this cannot be done in Aperture.
and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries. Steps/process to fix?
That is probably due to Gemini's replacing duplicate originals by links, and your best cause of action is to fix this before merging the libraries. Reconnecting can be done for your iPhoto libraries in Aperture.

Best way to merge multiple reports

Similar Messages

Maybe you are looking for