Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop

Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop can I put all the dated folders into one single folder

Drag and drop should do the job. Or move the files (or folders) in your operating system and then re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
Yes, you can put all the dated folders into a single folder (but if you plan to do this, then don't try move the files using your operating system and re-link)
Export most definitely isn't the solution.

Similar Messages

Best way to move files to external hard drive

Hi All,
My internal hard drive is nearly full. I''ve bought a 2TB external hard drive to copy my Aperture library to.
I'm working on a 27" iMac (10.6.8), with a 1TB hd and Aperture 2.0. External hard drive is an Omega eGo with firewire 800 (Mac Format).
Looking at some of the posts here, its seems that the simplest method is to copy the library (drag and drop) to a folder on the external HD. Then double click to open, at which point this will be the default library. After checking all ok, delete the original library.
I've also read suggestions that running your library on an external hard drive compromises speed, and that the files should be referenced externally with the library running internally for maximum performance.
Can anyone give me some advice as the best method to work work from the external hard drive? All my files are currently managed (around 820 GB)
I like the idea of something so simple as drag and drop to change my library's location, the delete the old one. but if I'm going to switch to external hd, I'd like to set it up correctly, from the start.
Thanks for your help.
Richard

Why not do this. Copy the library over to the external drive, leave the library on the internal drive alone for the moment and run off the external library.
If Aperture performs OK for your needs leave the library on the external and delete the library on the internal drive. During this period of testing you could switch between the two in order to get a real fell for how one performs over the other.
If it turns out that having the library on the external drive is causing problems then keep the library on the internal drive and switch to a referenced master setup with the masters on the external drive.
Remember that while you are testing this out and switching between the two libraries changes made to one library ill not be reflected in the other. So just use this time for testing and make sure any work you do in one library you can redo in the other.

What is the best way to move photos to external drive?

My internal drive is filling up and I'd like to move my photos in iPhoto onto an external hard drive, but stil view them in iPhoto?
What is the best way to do this?

You can copy your entire iPhoto library to the external drive. You can find it in your user library.
After copying it over, start iPhoto with the option key depressed. It might be the Control key instead so try that if the option key doesn't work. This wil give you the option of selecting a different iPhoto library. Navigate to your external har drive and select the iPhoto library you copied there. iPhoto will, in the future, continue to look for the library on the external drive every time you start iPhoto. You will not have to navigate there again, iPhoto will find the library as long as you do not move it and the drive in on and connected.
Once iPhoto is finding the library on the external drive you can delete the library on your internal drive to free up space there.

What is the best way to set up an external drive for video storage

What is the best way to set up an external drive for video storage?

Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

What's the best way to move files from my old G3 to my new Intel DuoCore?

I just received my new Intel DuoCore 17" iMac. For years I have been using a much-loved G3 500 mHz iMac. The new Intel iMac is still in the box, but I believe it shipped with OS 10.4.4. The G3 runs 10.2.6. I have a dial-up connection to the Internet; currently DSL is not available in my neighborhood. What is the best way to move my files from the G3 to the Intel dc? Can I simply connect them with an Ethernet cable and transfer files directly? Or is my best bet to simply save the files I want to transfer to a disc and do it the old-fashioned way? Please forgive me in advance for my ignorance; although I have been a Mac user and supporter for many years, I am astonishingly ignorant when it comes to the best way to using both Mac hardward and software.
iMac Intel DuoCore Mac OS X (10.4.4)

There are two issues - 1. Getting the files moved over, and 2. Being able to open them on the Intel iMac.
1. This can be technically easy if you are willing to spend the time. I moved all my stuff from my old Mac to my new one by hooking the two together with an ethernet cable, directly. You would need both machines to have appropriate IP addresses. (go to the network preferences and pull down the built-in ethernet panel.) Some addresses such as 192.168.1.100 and 192.168.1.101 would work with a subnet mask of 255.255.255.0) Now go to the new iMac and make sure the finder is selected (click on the desktop) and under the "GO" menu select "Connect to Server". You will need to put in the IP address of the old machine, and later it's administrative password. Then select its hard drive from the list (possibly only one choice) and it should appear as an icon on your iMac desktop. You can open this like any other drive and just drag items to the new iMac.
2. Whether you can use all the files moved over from the old G3 is difficult to answer. You may be using Classic mode sometimes on the G3 and have some stuff created with a Classic application. You are probably aware that the new Intel iMac does not support Classic mode, so some of these files may not be useable without a bit of work (or at all, perhaps.) For instance I had to purchase Appleworks to handle some of my old Clarisworks documents because Pages couldn't understand them. Once I had them converted to Appleworks documents, I could then convert them again to Pages documents.
I had some old MacDraw Pro documents that were equally problematic.
I would advise you to get the new iMac out of the box and connected to your dialup internet connection first. Do all the software updates until running software updater says there is nothing new. Then you will be at 10.4.7 with all the latest security and fixes etc. Then disconnect from the internet and use an ethernet cable to get the stuff off the old computer.
There will be lots more to do such as moving your mail, address box entries etc. later, but this is a start.

What's the best way to move files from my 2012 iMac to my 2014 MBP?

What’s a good way to move files from my 2012 iMac to my MBP?
I prefer to do graphic work on my 21-inch iMac (2012 version). But when I travel I need to copy files to my 2014 MBP. I learned that my 2012 iMac is too old for use of AirDrop, so I’m copying and moving files with a flash drive. That seems slow and clumsy. Is there a better way?

Target Disk Mode would provide a direct connection between the two Macs:
http://support.apple.com/en-us/HT1661
Nothing simpler than that is available.
Ciao.

Best way to move file

I am wondering which is the best way to move a file from one place to another?
The following code is working for me, but I am wondering if this is considered robust?
File oldFile = new File("C:\\toBeDeleted");
File newFile = new File("C:\\docs\\hasBeenRenamed");
oldFile.renameTo(newFile);
Is it a better approach to read in the file by reader or stream, and write it out again to the new location, and then delete the original file?

Which of those commands is non-atomic? Rename is
atomic on all operating systems I'm aware of.
Rename can't be used to move a file across file
systems. However, if it can, I don't see the point of
all the copying.From File.renameTo API:
renameTo
public boolean renameTo(File dest)
Renames the file denoted by this abstract pathname.
Many aspects of the behavior of this method are inherently platform-dependent:
The rename operation might not be able to move a file from one filesystem to another,
it might not be atomic, and it might not succeed if a file with the destination abstract
pathname already exists. The return value should always be checked
to make sure that the rename operation was successful.

Whats the best way to move files from a hard drive that wont boot?

I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive.
Whats the best way to capture the data?
There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
(124317)

Best way to move to an external boot drive

I going to move my main iMac boot drive to an external as I need to be able to pick it up and go and use it on the move with my MBP.
What is the best way to clone the iMac's internal and then put it on the external. Both drives are 320GB in size.
Can I use CCC or should I use disk utility from the boot DVD to create an image and then restore it to the external? My thinking behind the Boot DVD way is that nothing will be running when I do it...
Regards

Normally doesn't matter. The code running the machine is stored in RAM. CCC and other cloning apps duplicate what's stored on disk. The only problem you might run into is if you try to save something while you're cloning. For your purposes, since you're doing this for the first time, run CCC, and go get a coffee and a danish. Or, just watch what's taking place.

Best way to set up iPhoto; external drive

HI!
I want to set up iphoto in a way that steals less of my ssd drive space. I will buy a usb 3 harddrive, where I store my pictures. In iphoto I just want a reference to the picture on my external harddrive. But when working, some times I want to delete pictures; can I do this from iphoto, or will I only delete the reference?
How do I make sure that I have no duplicates, when I store files this way?
Ok, how do I set this up; is iphoto the best way?

But when working, some times I want to delete pictures; can I do this from iphoto, or will I only delete the reference?
It will only delete the Reference. iPhoto is not the best way. If you want to use iPhoto the best way is to run a Managed Library from the external disk.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361
Aperture is much more powerful in this regard.

Best way to move files to new computer?

Struggling to move about 10,000 files from my old computer to new computer. PSE10 in both computers running on windows 7 pro. Trying to use an external hard drive, but ending up with some empty folders; and the pop up says the images are already in the catalogue. I see all the files in explorer but can't get all of them visible in all folders?
Would I have done better connecting each computer directly?
Basically I'm asking what is the best method to copy/move files when upgrading to a new computer?

That is what I tried first with my Seagate external hard drive, but it would not allow restore on a different computer. It seems Seagate requires purchase of additional program to allow sharing to a different computer. So I tried using my older Lacied external hard drive with only 80gb which is less than my total catalogue size; so I could not do a simple backup and restore; so I manually dragged and dropped what would fit, ending up with the missing folders I mentioned. I just did a reconnection of files and think I finally have all folders full.
So Seagate was a waist of money. What external hard drives work well for a backup and restore, as you suggest? Or does someone else have some other recommendations?

What is the best way to move files to different folders in a plug-in?

I am writing a plug-in that needs to move files on the hard drive. I am using LrFileUtils.move(from, to) and everything is fine except that the catalog is not updated when the file is moved. After the plug-in runs I can use Library > Synchronize Folder to get the catalog back in sync with the new locations of the photos on the drive, but this manual step is less than ideal.
I am unable to find a way to move the files within the plug in that also updates the catalog (like dragging photos to a new location within the LR Navigator pane). Lacking an API for this, I looked for a way to programmatic execute the Synchronize Folder menu item, but was not able to find this either..
Can anyone recommend a better way to move photos to different folders within a plug-in that also updates the catalog?

Hi Andy,
There are 3 main file formats that you can consider writing your data out to in LabVIEW:
ASCII
Binary
Datalog
ASCII
ASCII files are useful because every operating system and almost every application can read/write ASCII format files. Use ASCII files when:
Other users or applications will need to access the data file.
You will not need to perform random access file I/O
File I/O speed is not crucial
Disk space is not crucial
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write to Text File.vi and Read from Text File.vi
Binary
Binary byte stream files are more specific to data storage and retrieval. Use b
inary files when:
File I/O will remain in LabVIEW only -- no other applications will be needing to write/read that file. There is no standard formatting for binary files and thus other applications or operating systems may be unable to read the file.
Files are smaller than ASCII files
Easier and faster random access to data
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Binary File.vi and Read Binary File.vi
Datalog
When to use datalog:
If you need to record data with a mixture of types, it can be cumbersome to convert everything to ASCII or to keep track of the binary formatting.
Datalog format is binary and internal to LabVIEW, so again only use this format if no other applications or operating systems will be needing to perform file I/O on the file.
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Datalog File
Example.vi and Read Datalog File Example.vi
Good luck!
Kileen C.
Applications Engineer
National Instruments

What is the best way to move files to a NAS

Hello,
I want to consolidate all my files on a NAS wired to my airport extreem with access by both the imac and the macbook pro.
Here's a bit of optional background on my situation:
My tidy little home network consists of two computers (imac Intel Core Duo and a Mac Book Pro) and airport extreem router. I also have a maxtor HD wired to the imac via fire wire for time machine backup. The imac is the primary file storage location and I share the home folder and sub-folders to the mac book pro with RW access to the files. There is not enough disk space on the imac to store all the files so I have my pictures stored on my macbook pro.
OK so now I have several questions I'm hoping you can help me with moving all my files to the NAS.
Is the NAS the right approach or do I need a server.
How can I get the Home folder to recognize or essentially sit on the NAS? The alternative (which I do with my macbook pro) is to point the user to the remote drive my configuring the side bar links to the external drive. I appreciate your advice here. I also know there are a bunch of details regarding moving my itunes and photo library which is a separate topic.
How do I handle file permissions with multiple users? Are there issues with a folder created by one user on the imac, limiting RW access by the macbook pro user?
Regarding the NAS, if I get a 2TB (two disk drive) NAS, I assume I can create two partitions (one for each drive) and have one for storage and another for time machine backup. Any advice here.
Thank you,

Remove the hard drive and get one of these USB hard drive adapters. http://tinyurl.com/a5l2htj Then plug the adapter into your iMac to see/retrieve the files.
 Cheers, Tom

How do I move files from external drive to Itunes on computer?

I am doing a system recovery and have saved my Itunes folder on an external drive. How do I get the data back into Itunes?

Install iTunes, the same version you had when you saved your music folder.
When done, don't run iTunes.
Copy the content of your itunes folder (iTunes Media, iTunes library...) from your external HD to /user/music/itunes
Run iTunes. You should see your content and playlists.
Bye

Best way to move files between FCPX and Motion?

What is the best protocol for bringing files back and forth between Motion and FCPX?
How do I save out from Motion for import to FCP? Is it with Templates?
Whats the drill?
I have looked at both the helps and am coming up short.
Thanks.

If you're simply working in generic Motion project, ProRes 422 Quicktime files are the best format for going back and forth.
If you want to save a Motion project to use as a template in FCP X, it has to be one of the template Motion project types. Title, Generator, Effect, Transition. You would select these from the Template Browser that opens first when Motion is initially launched.
If you want to start creating templates, I stronly recommend Ripple Training's "Rigging and Publising" video course for Motion 5.

Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop

Similar Messages

Maybe you are looking for