Best way to move files to external hard drive

Hi All,
My internal hard drive is nearly full. I''ve bought a 2TB external hard drive to copy my Aperture library to.
I'm working on a 27" iMac (10.6.8), with a 1TB hd and Aperture 2.0. External hard drive is an Omega eGo with firewire 800 (Mac Format).
Looking at some of the posts here, its seems that the simplest method is to copy the library (drag and drop) to a folder on the external HD. Then double click to open, at which point this will be the default library. After checking all ok, delete the original library.
I've also read suggestions that running your library on an external hard drive compromises speed, and that the files should be referenced externally with the library running internally for maximum performance.
Can anyone give me some advice as the best method to work work from the external hard drive? All my files are currently managed (around 820 GB)
I like the idea of something so simple as drag and drop to change my library's location, the delete the old one. but if I'm going to switch to external hd, I'd like to set it up correctly, from the start.
Thanks for your help.
Richard

Why not do this. Copy the library over to the external drive, leave the library on the internal drive alone for the moment and run off the external library.
If Aperture performs OK for your needs leave the library on the external and delete the library on the internal drive. During this period of testing you could switch between the two in order to get a real fell for how one performs over the other.
If it turns out that having the library on the external drive is causing problems then keep the library on the internal drive and switch to a referenced master setup with the masters on the external drive.
Remember that while you are testing this out and switching between the two libraries changes made to one library ill not be reflected in the other. So just use this time for testing and make sure any work you do in one library you can redo in the other.

Similar Messages

Whats the best way to move files from a hard drive that wont boot?

I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive.
Whats the best way to capture the data?
There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
(124317)

Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop

Best way to move files to external drive in LR 5. Drag and drop or export, if drag and drop can I put all the dated folders into one single folder

Drag and drop should do the job. Or move the files (or folders) in your operating system and then re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
Yes, you can put all the dated folders into a single folder (but if you plan to do this, then don't try move the files using your operating system and re-link)
Export most definitely isn't the solution.

Finder freezes when trying to move files to external hard drive

Whenever I try to move files from internal hard drive to my external finder freezes it. I have over 5 TBs of free space on my external, so I know it's not a space issue. This happens no matter the size of the file. It starts the copy and then will freeze before it finishes. If I try to force quit and select relaunch it acts like it is relaunching but my icons never re-appear and the command bar at the top never returns. So I end up having to hard boot.
I just reinstalled the 10.5.8 combo update and verified both hard disks, if any repairs came up I repaired and then did the same with disk permissions....it's still freezing on me. I am frustrated because there are some files I'd really like to move to my external raid hard drive but I'm not able to.
The freezing happens if I'm trying to transfer files from a disc or an additional external HD. My internal HD is only so big and the external Raid drive is for my capture scratch on Final Cut Pro and I'm even having issues capturing to that drive. Everything wants to be on my internal HD and that doesn't work for me.
Any help would be greatly appreciated.

Sean Dale1 wrote:
Do you get any error messages and if so what are they? Do you have any problems copying files off the problem drive back to your Mac or do the freezes only occur when copying to the external?
No I don't get any error messages, the finder just freezes and when I try to relaunch finder it doesn't relaunch properly..all icons are missing and I'm not able to access the the task bar to properly shut down so I have to hard boot.
It happens only when trying to save files to the external, whether through drag and drop or within programs. I am able to access files on the external and copy files from there to my internal without problems.
Have you tried attaching this drive to another Mac and if so do you get the same issues?
I don't have another Mac to attach the drive to.
How is this RAID attached, SCSI, FireWire, SATA or what? How was the RAID created, Disk Utility or third party software and have you verified the integrity of the RAID?
The RAID is attached via SCSI. In an attempt to solve this finder issue I re-installed the drivers to the most current drivers available and in doing so updated any firmware....and there was no change. I was not the one who set up the RAID so I don't know how it was created. It's an Enhance UltraStore R16 and I've been using it without issues since January 2007 and this freezing thing has been intermittent for a few months now but now it's constant and annoying. I've verified the disk through disk utility but I don't have any software to check the integrity otherwise. Do you have any recommendations as to what software I could use to do this?
Message was edited by: Emily80

Automator to move files to external hard drive?

Is it possible to have "automator move files uploaded to my computer automatically from my phone, via motocast (Droid Razr Maxx) which sits in a "pictures" subfolder, and move it to the external hard drive i use to back up my macbook air weekly? I occasionally take photos and videos and were wondering if this is at all possible to do being that I only connect my external hard drive occasionally and not regularly. The external hard drive was partitioned to have a back up drive for time machine and another drive for other (pics&vids) use.
If it is possible can the automator task then trash all files in original pictures subfolder when task is complete to avoid any memory use on macbook air?
Any help is greatly appreciated.

sdiaz34 wrote:
The external hard drive was partitioned to have a back up drive for time machine and another drive for other (pics&vids) use.
If it is possible can the automator task then trash all files in original pictures subfolder when task is complete to avoid any memory use on macbook air?
You really don't want to do that.
You'll have only one copy of the files, on the external HD. When (not if) it fails, they'll be lost.
For best results, get another external HD for your photos. Then let Time Machine back up both your internal HD and the external. See Time Machine - Frequently Asked Question #32 for details.

How to find movie file from external hard drive in imovie?

i shot 29 gig of video on the road. i imported it into my macbook to the desktop. then i drag and dropped it into an external hard drive. now i have since dragged and dropped the file to my imac at home to work with it in imovie, but imovie cannot find any mpeg or any such movie file. i then tried to put it back to the canon hg10. after i plugged in the canon, i dragged the movie folder to the canon and it imported 29 gig. but the canon does not show any new movie files in the video mode. when i open import options in imovie, no new movies appear. any ideas?

For iMovie to see your file, it must be either on the internal drive, or it can also be on an external drive that is formatted as Mac OSX Extended (Journaled). (Not FAT32).
For the internal drive, your clips must be stored in a folder inside the Movies/iMovie Events/ folder.
For the external drive, your clips must be stored in a folder within the iMovie Events folder at the top level of the drive. Move your files there and then start iMovie, and it should see them.
Message was edited by: AppleMan1958

Locked Windows/Folder, Cannot Move Files On External Hard Drive

I'm running Tiger 10.4.11 on an iMac and am the only user, and therefore, administrator. I'm encountering a weird, albeit small, problem on one of my external hard drives (Seagate 320 gigs): I have boatloads of video files stored on the drive, but suddenly cannot move files into folders within the drive (I see a white "do not enter" kind of a sign over whatever icon I try to move). I can't move these files off the drive and onto my iMac's internal hard drive, either. I can only delete them. I can add new files to the drive, but then cannot move those either (can only delete them).
The folders and drive are not locked, I have read & write access, etc., so there doesn't seem to be any reason for me to be barred from moving items. Any clues? Many thanks.

Thank you for your reply and kind welcome.
That's a great tip, but that box was already checked, so I'm afraid that wasn't a solution. The problem ended up "solving itself" after I left my machine off for the day while I went to work. I may never know why that error occurred, but I certainly don't care, as long as it doesn't happen again. Take care.

Movie files to External Hard Drive - HELP

While I still have roughly 35 GB left on my hard drive, I do plan to purchase an external hard drive to additional space. With that said, my lack of knowledge around the inner workings of iMovie and the physical movie data make me pause in terms of moving items over to the external hard drive. I don't want to (a) lose anything or (b) cause issues with any of my existing projects and associated web gallery postings.
Any suggestions on how and what to transition onto an external hard drive? In terms of my historic use, I typically load movie clips from my Sony HD camera, which in turn places these files into the event library. I have then taken snippets and placed them into various projects. I primarily use these projects to share via web gallery, with little creation of any other movie-type files.
Any suggestions would be greatly appreciated. Any similar advice for photos (which I typically edit in iPhoto) would be appreciated as well.

Any suggestions would be greatly appreciated.
Basically, just make sure the external drive is formatted as a Mac OS Extended drive and make sure you perform all transfers to the external drive from within iMovie '08. (I.e., doing so externally can orphan resource pointers active in projects currently being edited.) Current Events on your internal drive can be dropped to the external drive once it is visible within iMovie '08 and the application will handle the creation any needed folders, transfer the data files, as well as, update the the resource pointers for any projects in the process of being edited.
Any similar advice for photos (which I typically edit in iPhoto) would be appreciated as well.
See iPhoto Help ("Moving your iPhoto Library folder to a new location") for specific instructions and warnings.

White Prohibitory Sign When Trying To Move Files Off External Hard Drive

Why am I getting the white prohibitory sign when trying to add a new file to an external hard drive? I have run Disk Utility and permissions repair.

See Mac OS X: "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
http://docs.info.apple.com/article.html?artnum=106805
 Cheers, Tom

Best way to move to an external boot drive

I going to move my main iMac boot drive to an external as I need to be able to pick it up and go and use it on the move with my MBP.
What is the best way to clone the iMac's internal and then put it on the external. Both drives are 320GB in size.
Can I use CCC or should I use disk utility from the boot DVD to create an image and then restore it to the external? My thinking behind the Boot DVD way is that nothing will be running when I do it...
Regards

Normally doesn't matter. The code running the machine is stored in RAM. CCC and other cloning apps duplicate what's stored on disk. The only problem you might run into is if you try to save something while you're cloning. For your purposes, since you're doing this for the first time, run CCC, and go get a coffee and a danish. Or, just watch what's taking place.

What is the safest way to move iPhoto to external hard drive so i can view photos on my iMac and mAir?

Whats the safest way to move all my photos (10 gig iphoto library) from my iMac to an xternal hard drive (64 gig thumb drive) so i can view them on my mAir?
Is this recommended? I had help @ a 1:1 and moved my iTunes (500gigs) to a Seagate 1T portable drive so i would have access to my mAir, glad i did.

Whats the safest way to move all my photos (10 gig iphoto library) from my iMac to an xternal hard drive (64 gig thumb drive) so i can view them on my mAir?
Is this recommended? I had help @ a 1:1 and moved my iTunes (500gigs) to a Seagate 1T portable drive so i would have access to my mAir, glad i did.

Best way to set up on external hard drive?

Hi,
when I got my macbook and logic pro 9 i was advised about having an external harddrive as this would take up some of the cpu load. I've just installed pro 9 on my macbook and it does seem to take up a lot of usage with the 'disk too slow' message appearing a lot.
I've got a firewire (only 400 i'm afraid but with a 7200 disk speed)external harddrive coming in the next day or two and the question I'm asking is how to best set up logic on the external card to minimise the load on the macbook.
Do I install the whole thing on the external harddrive or just set up a folder for the loops/completed projects?
Sorry if this has been asked a zillion times but I've searched through the previous threads and couldnt find a specific answer.
Thanks, Jim

mrjim65 wrote:
Do I install the whole thing on the external harddrive or just set up a folder for the loops/completed projects?
The easiest solution is the latter: save your projects to the external drive (with "Assets" checked).
CCT

What is the best way to remove files from the hard drive?

I'm donating one of my computers, and there are certain sensitive files (bank records, etc.) I need to remove. I want them completely removed to the point it's like they never existed, so any hard drive recovery tools can never find them.

Then you will have to get a replacement set from Apple.
Since the DVD are your license to OS X they really should be included with the Mac when you sell it.
Allan

I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

What is the best way to move files to different folders in a plug-in?

I am writing a plug-in that needs to move files on the hard drive. I am using LrFileUtils.move(from, to) and everything is fine except that the catalog is not updated when the file is moved. After the plug-in runs I can use Library > Synchronize Folder to get the catalog back in sync with the new locations of the photos on the drive, but this manual step is less than ideal.
I am unable to find a way to move the files within the plug in that also updates the catalog (like dragging photos to a new location within the LR Navigator pane). Lacking an API for this, I looked for a way to programmatic execute the Synchronize Folder menu item, but was not able to find this either..
Can anyone recommend a better way to move photos to different folders within a plug-in that also updates the catalog?

Hi Andy,
There are 3 main file formats that you can consider writing your data out to in LabVIEW:
ASCII
Binary
Datalog
ASCII
ASCII files are useful because every operating system and almost every application can read/write ASCII format files. Use ASCII files when:
Other users or applications will need to access the data file.
You will not need to perform random access file I/O
File I/O speed is not crucial
Disk space is not crucial
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write to Text File.vi and Read from Text File.vi
Binary
Binary byte stream files are more specific to data storage and retrieval. Use b
inary files when:
File I/O will remain in LabVIEW only -- no other applications will be needing to write/read that file. There is no standard formatting for binary files and thus other applications or operating systems may be unable to read the file.
Files are smaller than ASCII files
Easier and faster random access to data
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Binary File.vi and Read Binary File.vi
Datalog
When to use datalog:
If you need to record data with a mixture of types, it can be cumbersome to convert everything to ASCII or to keep track of the binary formatting.
Datalog format is binary and internal to LabVIEW, so again only use this format if no other applications or operating systems will be needing to perform file I/O on the file.
Examples within LabVIEW Example Finder: Fundamentals >> File Input and Output >> Write Datalog File
Example.vi and Read Datalog File Example.vi
Good luck!
Kileen C.
Applications Engineer
National Instruments

Best way to move files to external hard drive

Similar Messages

Maybe you are looking for