Best way to open arw files on iMac or iPhoto?

Hi, I recently bought a Sony NEX-3n and I had no idea about the different raw file formats. I was wondering what the best solution is to upload raw photos onto my imac (all updated software and OS X). I've read about converters, but I'm leary of just downloading anything. I don't always use iphoto and I'm looking to start using something like Pixelmator. I may buy aperture, but I need to do more research. I'm just looking for a way to see the raw photos I've been taking.
THANKS!
Amanda

Amanda,
the cameras supported by Aperture are listed here:
Apple - Aperture - Technical Specifications - RAW Support
The cameras supported by Mt. Lion:
OS X Mountain Lion: Supported digital camera RAW formats
Have a look, if your camera is supported by either of these lists.
Regards
Léonie

Similar Messages

Best way to transfer Word files from imac to ipad2

I have certain Word for Mac files which I would like to transfer to my iPad2 so that I can read them when traveling. What's the best way to accomplish this?

You're gonna need an application called Pages (Apple's Word). It's around about 12 bucks on each iTunes Store.
Once you have the app on the iPad you use a feature called File Sharing. File sharing is found in the Apps section of the iPad if you scroll to the bottom.
When at the File Sharing section you should see Pages on the left. Click on Pages.
To the Right-hand side you should see to buttons. Add and Save To. Click on Add
Choose your file you want in the computer and then Ok.
Sync the iPad.
Once thats done there should be a little Arrow to the bottom of Pages which imports the documents to the app.

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. What is the best way to keep the files in these machines synchronized?

I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?

How did you transfer the files to the iMac. If you exported the files out of the MB library using Kind = Current you should get the edited version. Any other option may not.
If you want to keep the two libraries "synced" any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode, Transferring files between two computers using FireWire, with WiFi. and use the paid version of iPhoto Library Manager to copy that album from the MB library to iMac library. It will also copy the original and edited versions, keywords, titles, etc.
OT

I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

I have a macbook pro I use for work and iMac at home. What is best way to manage my files? Use iCloud? Dock my laptop when I come home? Appreciate any suggesitons

That depends on what kind of "files" you're talking about and what your employer's policy is on using cloud storage.
I found dropbox and/or OneDrive work very well for keeping documents in sync between multiple machines.

Best way to handle source files

Hi there,
After some pretty general advise please.
The company I work for looks after a lot of websites, and one
of the
headaches we have is the best way to handle source files. By
source files I'm
referring to Photoshop files, Flash .fla files and also other
none Adobe
files that relate to a site, not the .html, .asp, .aspx,
.css, .js etc type
files.
Now I'm NOT after a version control system, just a simple way
to store the
source files in a location that is separate from the website
but still to be
able to have a smooth workflow between the Dreamweaver site
and it's source
files.
At the moment, and I know this is unwise, we have a
subdirectory within the
site where we store the source files, and use WebDAV to
transfer both site
and source files to and from the server. But I really want to
separate the
site from source but still maintain a link between site and
source...... if
you see what I mean. I think the upshot is I would like to be
able to open a
site within Dreamweaver and instantly be able to access that
sites source
files if needed. This method needs to be shared across a
small team spread
round the UK.
I looked at the Repository Subversion version control, but
like I said I'm
not after a source control system, plus it appeared to
conflict with WebDAV
and Contribute, that some of our clients use to maintain
content on their
sites. I also looked at Version Cue which looked promising,
but can't see a
clear workflow between Dreamweaver and Version Cue which
separates site from
source. I might be missing something.... part of my brain
perhaps. :)
Would be grateful for any advice please.
Cheers,
@ndyB

Take a deep breath. Relax. All is fine.
iDVD does not look at the size of your video file, it looks at the length. iDVD can accomodate up to 2 hours of movie
iDVD gives you different options depending on the length of your movie. Although I won't agree with your friend about reducing the length of your movie to 15 minutes, if you could trim out a few minutes to get it under an hour that setting in iDVD (Best Performance though the new version may have renamed it) gives you the best quality. Still, any iDVD setting will give you good quality even at 64 minutes
In FCE export as Quicktime Movie NOT any flavour of Quicktime Conversion. Select chapter markers if you have them. If everything is on one system unchecked the Make Movie Self Contained button. Drop the QT file into iDVD

What is the best way to run .exe files on my mac?

What is the best way to run .exe files on my mac? I need to run some updates for my john deere gps and the downloads i get can only be run on windows.

There are several options for running Windows software (*.exe files) on a Mac, depending what your program is, how often you use it, and your personal preferences.
One way that does not require Windows is an open source effort called WINE. Check out winehq.org. You may find that that's all you need for your programs. There is also a commercial effort that has grown from WINE, and you will find info about it on the site mentioned. These DO NOT require that you have and install Windows.
If you want to run sessions devoted only to Windows software, and want programs to run as fast as they do on a PC, the Apple's Bootcamp program is useful. With it you dedicate a partition on your hard disk to windows, and on startup choose to either boot into OS X or Windows. Each runs without any connection to the other. This requires you have a copy of the Windows software as well as the applications you want to run.
If you want to be able to easily exchange data between your Windows and Mac programs, and skip back and forth between the two, there are several emulators available that run on Mac OS X and create a Windows environment where many Windows programs can operate along side Mac programs. Parallels and VMwear are two comercial packages available for purchase and Virtual Box is an open source effort available for free. Google will find all three for you.
My only experience is with Virtual Box. It is slow and a bit clunky, but it is free and meets my needs for the very few "just got to have" windows programs I sometimes use.
Google is your friend on this and can provide a lot more, and better, information than I can.
Best of luck,
Ray

What's the best way to migrate from an old iMac to a new iMac?

What's the best way to migrate from a 2010 iMac running Yosemite to a new 2014 iMac?

Hello jonfromnorth caldwell,
The article linked below details how to utilize target disk mode to transfer files. This can also be used in conjuction with Migration assistant to transfer your information quickly (the 2010 iMac will appear as a storage device to the new iMac).
OS X Yosemite: Transfer files between two computers using target disk mode
http://support.apple.com/kb/PH19021
OS X Yosemite: Transfer your info from a computer or storage device
http://support.apple.com/kb/PH18870
Cheers,
Allen

What's the best way to removed unwanted files?

I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks

bad dad wrote:
I have an iMac G4 running OS X 10.4.11 with 1GB of DDR SDRAM. I'm wondering what's the best way to remove unwanted files from the RAM, if it's even possible. There are apps and other files I no longer need. If I can dump the unused files will it help the computer run a little faster? Can I eliminate the unwanted files some how by myself or do I need a program that does it? Thanks
Applications are stored perminately on the harddrive [ Macintosh HD ]. When applications are running that is when they appear in a window, they take up RAM. You see your running applications by using activity monitor:
Macintosh-HD -> Applications -> Utilities -> Activity Monitor
Application when they are not running, they do not take up RAM. You will not see any performance improvement when you delete an application from your Harddrive. [ unless you have filled up your harddrive ]
Best to have greater than 2gig of free space on your Harddrive. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
Most applications do not take up much space on the Harddrive. I copy my unused application to a folder named additional applications.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
This will save you a gig of space.
Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
http://monolingual.sourceforge.net/
A detailed write-up on how to use Monolingual:
http://www.jklstudios.com/misc/monolingual.html
(3)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(4)
Buy an external firewire harddrive.
(5)
Buy a flash card.

Is there a way to open Excell file from the server and display in the UI and save it back on to the

Hello there,
Is there a way to open Excell file from the server and display in the UI and save it back on to the server? (like showing xell file as a datagrid - add rows, columns etc.)

Hi Mike,
Welcome you to the forum.
You may try:
SELECT * FROM MyDBNameHere.dbo.OUSR T0
Thanks,
Gordon

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

What is the best way to open emails and attachments without using wifi?

For I-phone and I-pad, what is the best way to open emails and attachments without using wifi? I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi. Any help would be appreciated! Thank you!

Thanks! That is a very good question you post. My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at. My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions! But thank you for your response I will tell him the information you told me and hopefully that will help!

What is the best way to open a HTTPS connection?

What is the best way to open a HTTPS connection and retrieve the content as XML? This is how most of the online API is done nowadays, how can this be done on the iphone SDK?
Thanks

Have a look at the SeismicXML example that comes with the iPhone SDK. It uses http instead of https but it may work for you.
You can also look at the NSURLRequest and NSURLConnection classes.
Enjoy.

Is there a way to open a file when it says it needs DMR?

Is there a way to open a file when it says it needs DMR?

Maybe you can let her play on your computer where it may be easier to restrict what she can do, provided there's an OS X equivalent. Of course supervision is probably the safest solution until she is old enough to understand she shouldn't do anything that's not permitted. But then she'd probably be old enough not to need to learn her ABSs.

Is there a way to open zip files on iphone5?

Is there a way to open zip files on iphone5?

I'll second robdrage on Readle's Documents. Also check out iZip. Dropbox will also open zip files. Any of the above will mange and allow yo to view image files.

Best way to open arw files on iMac or iPhoto?

Similar Messages

Maybe you are looking for