Best way to preview AIR for Android projects for different devices?

So if I am developing an AIR for Android app, is there a good, simple way to preview the app on any android device? I have installed it on my phone of course, but is there a simulator/emulator of some sort available so we can see how it would look on both an Android phone and a tablet? Thanks in advance to anyone who can help!

DPI aside, you can just set your resolution on the project to the target devices resolution to preview how it will look. While vectors will render much smoother on the device (higher DPI), it's a very easy way to target various resolutions for testing.
If you have the full CC suite you might want to consider using Flash Builder 4.7 which has many different device presets and allows you to create your own presets to mimic tablets and phones. It really depends how complex your project is to move over to FB.

Similar Messages

What is the best way to set up an external drive for video storage

What is the best way to set up an external drive for video storage?

Check the formatting. It need to be formatted as Mac OS Extended (journaled). This is also known as HFS+.
FAT32 and NTFS formatting will not work with iMovie.
If necessary, you can reformat using Disk Utility.
Make one large partition. No need for multiple partitions.
Do moves or copies to the external drive through iMovie as detailed in iMovie Help. If you move Events in the Finder, they may become unlinked from the projects that use them.

What is the best way to record a video(not big) for free on a mac w/isight?

What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
Thanks.

Hi Carolyn,
you can use iMovie to record a video for free on a Mac with iSight.
1. Open iMovie HD
2. Choose “Create a new project”
3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
5. Press “Record with iSight” in the main picture window.
6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
7. You are done!
iMac G5 PPC 2,1 Ghz Mac OS X (10.4.8)

What's the best way to master an MPEG 2 file for DVD Studio Pro.

In version 4.5 of FCP I was able to use QuickTime conversion to encode to MPEG2. Now that option is not there. I hate using compressor 2 to create MPEG 2 because when I do the MPEG 2 files always seem to studder and I don't know why. I shot my project in HDV. It is about 64 minutes long. Any suggestions on the BEST way to master an MPEG 2 file for DVD Studio pro? Thanks in advance!
Peter
PS - I'm using FCP 5

Some people have reported a field reversal problem with HDV to SD DVD encodes. There's an Apple technical document on this issue somewhere, but the problem was supposed to be addressed by a Pro Applications update a couple of years ago... This site might help you get to the bottom of the problem.
http://www3.telus.net/bonsai/Step-by-Step.html

HT5361 Best way to track history of version releases for Apple Mail.app?

Best way to track history of version releases for Apple Mail.app?
A great many of the traditional OSX installtion history items are no longer available in 10.8 One can no longer consult the installation history of the "Software Update" preference pane, because that functionality has moved to the Mac App Store utility. The Systems Information Utility does indeed show *some* installation history, but it does NOT include the Mail.app, for some reason. Fianlly, I can't find a web posting where apple at least provides the list of all recent software updates for mail.
Any suggestions?
Thanks!

UPDATE:
I have partially answered my own question. I found that if go to the History window for the selected file, then double-click the "version" (indicated by the label, which is actually displayed in the "comment" field), it opens the file in html. But, there is a "save as" button in this preview window. If I save the file to a temporary location and optionally, give it a different file name (e.g., to indicate the rev #), I can then go to Windows Explorer, double-click the file, which then launches in a browser window and displays the formatted web file. So this will definately suit my purposes from a audit perspective.
However, I still would like to understand how the tags, branches, and pinning works because that might be a better way?
-Kristen

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Best way to set up two new iTouches for kids

I have a two new iTouches for my daughter (8) and son (5). My iPhone is set up with iTunes on my iMac computer. Both kids have an a user account on the iMac. What is the best way to set up the iTouch's for my kids?
Do I use my Apple ID for their iTouch and sync it to iTunes on my iMac user account (same as my iPhone)?
Do I use my Apple ID for their iTouch and set up iTunes on their user accounts on my iMac?
Do I get my kids their own Apple ID and sync it to iTunes on my iMac user account?
Do I get my kids their own Apple ID and sync it to iTunes on their user accounts on my iMac?
Do I set up one Apple ID for both kids and sync to iTunes so they can have the same games and only pay once?
I also have an iPad that I sync to iTunes on my usser account.
Thanks

I have the same dliemma. Daughter 8, son 6 - 2 new itouches for xmas - one library , my iPad, wife's iPhone ??
I was intending on just keeping one library (this does contain music with explicit lyric content etc) and manage their music via separate playlists.
As far as accounts and restrictions go, I was going to set them up with their own itunes account (using mail addresses only I can use). Load the account up with a voucher each.
The restrictions I was going to apply at the iPod (rather than the account) using a PIN I know - this way you can limit Safarii browsing (i.e. turn it off), youtube, and the age limit to the apps they can install and run - and the movie ratings allowed etc.
Happy to hear other ideas though - I'm intending on setting this up BEFORE they get them.

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

What is the best way to add libraries to a project?

What is the best way to add technologies to ADF? For example log4j. Or does the embedded logger have log4j features?

HI,
Hope helpful
http://technology.amis.nl/blog/8380/manage-jdeveloper-external-libraries

Best Way to setup a disaster Recovery site for a logical standby database

I have a logical standby DB (L1DB) as a reporting db on the same machine as the primary (P1DB). We are planning on building a disaster recovery site with similar hardware and potentially have disk mirroring of atleast the redo log files.
The DR site can hold an additional physical standby (S1DB) for the primary (P1DB). I am trying to understand what would be the best way to setup the Disaster Recovery site for the L1DB logical stdby. Ideally, when the disaster happens, and I no longer have P1DB and L1DB, I should be able to switch to S1DB as the new primary. But how do I setup to have a L2DB that takes the place of L1DB and has its contents and can be setup as a logical standby of S1DB?

If you already setup one logical standby, then you know how it works, so not sure what question you are asking ?
Personally I would setup L2DB as a standby of the original primary P1DB. Having downstream standby databases complicates things, and adds additional lag between primary transaction time and L2DB apply.

Can I use the same email address for facetime on 2 different devices (ipod touch and a mini)

can I use the same email address for facetime on 2 different devices (ipod touch and a mini)?
I've set up my daughters ipod touch last year all fine. She's had a mini this yr but when setting up facetime and entering her email address, which is used on the touch, I get an error message saying the address is already being used.
I thought you can use the same email address on multiple devices.

I have four different email addresses setup on my Mac, iPod Touch and my two iPads that I can select from and use as the email address with no problems at all.
Turn off FaceTime, and sign out of the Apple ID in the FaceTime settings, restart the iPad and try again. Turn FaceTime on again, sign in with the Apple ID and then try the email address again.

There are certain albums and songs I don't want my children having access to in iTunes Match through their iPod and iPad. Is there a way to control what songs are visible on different devices?

There are certain albums and songs I don't want my children having access to in iTunes Match through their iPod and iPad. Is there a way to control what songs are visible on different devices?

No.

Best way to set up a scratch disc for a shared project?

I am currently working on a project with 4 seperate computers and users working from a shared external 10TB drive. What is the best way to set up the scratch disc and media cache folders?
Each worker is editing a sequence and then posting back to the 10TB drive.

Use the identical path (including drive letter) for Media Cache,
Preview Files and source media files on all machines.
Premiere will look to absolute, not relative paths for these files.

Best way to handle large number video files for a project..

Hey, I was looking at getting some insight from the community here. Bascially there is a project that is being worked on that requires large amount of footage to be sifted through that only a small percentage will be used. These are mostly HD files and while most of the footage has been watched on Quicktime with notes taken, my question is this.
What is the best way to take only small portions of each file without having to load everything into final cut and without any loose of quality. Should I just trim and rename from Quicktime or is there an easier way?
Reason this needs to be done this way is the smaller segments will each be sent to other editors and rather then send huge files we want to split it to smaller amounts for each editor to use.
Thank you so much for any input regarding this, I look forward to what you have to say

Open the clip into the viewer. Mark In and Out points on the section you want. Make it a subclip Cmd-U. Drag the subclip into the bin for the editor who needs it. Repeat.
If you batch export from a clip there is a selection to choose whether to export the whole clip or check box to export the marked I/O.
This does not sound like a good project on which to being learning FCP.

Best way to save every night a project and one more

I have a typical raid setup. E= 2 0 striped drives and F= 2 0 striped drives.
At the end of a day, what is the best way to offload then bring back in the next morning to keep working?
I have been just offloading via project manager collect files and copy to new location. Does the preview files automatically understand which drive to go to?
I am assuming yes on this even though separate drives.
My next question is this.
We have another machine that I have editors just cut and trim on. It is a single raid setup 0 striped.
When I transfer this over to the bigger machine with the raid pairs E and F it doesn't understand to take files to the preview drive since there was not another drive on the machine it was created on.
What is the best remedy for this setup bring a simple raid project in to a 2 raid setup for further editing.
Just trying to clear this up.
Thank you for your responses. : )
David

I dont understand why you feel the need to do this...
At the end of a day, what is the best way to offload then bring back in the next morning to keep working?
Apart from the effort involved..I would be worried that errors and corruptions would occur with all the data transfers going on repeatedly.
If the source files are have back ups and you back up your project file...why does this not work.

Best way to preview AIR for Android projects for different devices?

Similar Messages

Maybe you are looking for