Best way to record CDs and vinyl to iPad

I am looking for the best way to record pre-recorded music, (CDs, vinyl) to my iPad. I have an M-audio interface I used with my MacBook.  I am looking for the best app to use, hopefully with an analog style VU meter with a needle. thank you.

Hi Paul
Thanks for the response. My HTC can record my video, but it is my old phone so is no longer connected to network or even works as a phone. This is why I need to either beam/bluetooth the file, or use a cable if that's the way to do it.
Unless I'm missing some other obvious way. I suppose if I have to, I can record video, either on my HTC or digicam then convert and drop into itunes, synch and then its on my iphone to upload to YouTube (if this format works for YouTube)
Long story short - I'm looking for a quck way to record video and upload using the iphone, on the go (ie. not needing my home PC)
Thanks again!

Similar Messages

  • HT1473 What is the best way to covert Cassettes and LPs to CD so it will be recognized on iTunes?

    What is the best way to convert cassettes and records to digital so it can be recognized on iTunes?

    I think hhgttg27 has made a couple of very good points. Perhaps it's worth expanding the discussion.
    hhgttg27 wrote:
    I'd be tempted to say that unless you already have audiophile equipment and/or the LPs and tapes involved are not available in digital format you'd spend a lot less time and get better results just re-buying the music on CD or in a downloadable format.  Trying to deal with defects in the source (particularly the pops and clicks that are present in a lot of LPs) can be incredibly time consuming, and any of the tools that claim to clean up such sources automatically generally do so to the detriment of the overall audio quality.
    I have made these conversions myself in the past, and I can confirm, it is a very time consuming process. I usually clean my audio of the clicks and pops manually, which makes the process even longer. As also stated, if the music is available in digital form, it is probably easier to simply buy the digital file. Consider the benefits:
    Since you are creating digital files, ignore the cost of a CD and consider the cost of ready made digital files. Digital albums usually cost less than a CD, and if you don't want a complete album, it's possible (with most albums) to buy only the songs you want, which reduces unnecessary costs
    It will be much less work. (In many countries, the cost of one digital version of a song is probably equivalent to about six minutes of paid employment. When I first started creating digital versions of my vinyl, it was taking me up to four-and-a-half hours to turn one album {of 60 minutes} into digital files. So to create a decent quality file of a four minute song could take me 10 minutes or longer. I could probably do it in less time now, but I'm experienced.)
    Higher Bit Rate songs are available for some music, if 256Kbps (as supplied by iTunes and Amazon, among others) isn't good enough for you
    The time taken to create a decent digital version of a song includes:
    The time to record it (real time, so a four minute song takes four minutes)
    Editing the start and finish times, so that you have a clean start and finish to the song
    Editing out faults, such as clicks and pops (this is probably the most time consuming task)
    Typing in the song information
    song title
    album title
    artist
    track number
    genre
    year
    extra information for compilation (various artist) albums
    Saving the file - giving it a filename
    Finding the artwork for the song/album and adding that to the digital file

  • What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

    What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

    While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
    Test your process first is all I can advise.
    x

  • What's the best way to record different articulations in 1 phrase?

    In my first violins I am using forte legato, pianissimo pizz, forte tremelo and forte marcato in 1 phrase within 4 bars. What now would be the best way to record this? I am using Peter Siedlaczek's Complete Classical Collection. Do I make a seperate track for every effect and record 1 bar on every track? Or do I use the Key Switch for every effect withing 1 track? What is the most easiet way of working and especiallyu, what used not all my processor power? I only have a PowerPc with w GB ram.

    Seems like you've answered your own question as those are the two ways to do what you are trying to do. Using the key-switch will be less CPU intensive than using multiple instances of the plugin.

  • What is the best way of recording bass

    Hi Peeps
    What is the best way to record a bass guitar in Logic. I'm going through a Fast Track Pro Audio Interface. The songs we are recording a disco cover, like get down on it and freak out, so need quite a warm rounded tone to them with a solid level.
    Thanks
    Matt

    Hi Peeps
    What is the best way to record a bass guitar in Logic. I'm going through a Fast Track Pro Audio Interface. The songs we are recording a disco cover, like get down on it and freak out, so need quite a warm rounded tone to them with a solid level.
    Thanks
    Matt

  • BEST WAY TO RECORD FROM TV

    Whats the best way to record from TV and then be able to edit the footage, without losing quality?
    Is it with a dvd recorder, how to you get the files off the recorder???
    Thanks
    Simon

    If you already have a digital video camera, you can probably do it without buying anything extra. I have done this by connecting the video output from my able box to an input on my video camera, then connected the camera to the computer using the FireWire cable. I opened iMovie and imported the video from there. Of course, it's a bit of a pain, so I haven't done it often, and the quality is only as good as your camera is capable of. You may need to buy the cable to connect the cable box to the camera, though mine came with such a cable.

  • Best way to record electric guitar

    Hi all,
    after months of playing with GarageBand, a fantastic tool, I decided to try to record something with my electric guitar, just to see if I could be able to compose a song
    Well, I recently got a Dual G5 PowerMac, I saw it has a line in and a digital audio connector. I even got an iMic, a leftover from the "old" Dual G4 I had.
    So far, which is the best way to record my electric guitar? I already have the 1/4" -> 1/8" adaptor, should I just plug it in the iMic or the line in port on the rear of the Mac?
    Or , should I use a pre-processor before sending the signal to the Mac (I have an effect simulator from yamaha)?
    And, in case neither of the 2 scenarios are really worth it, what do you suggest?
    I already tried using the search feature, but I really couldn't find 1 clear topic that summed up my questions... sorry 'bout that.
    Thanks in advance,
    Regards

    You can certainly try the Line-In, you won't hurt anything. Most people find that it doesn't work very well because guitar is not "Line-Level".
    Others question the quality of the A/D converts built in to the Mac. Personally, I doubt the iMic's are any better, but the level problem usually forces one away from the direct Line In without some form of pre-amp.
    I've used the iMic (though with a mixing console) and found it acceptable. A higher quality interface (read much more money) yields much better results ... it's always a trade off.

  • What's the best way to record a phone conversation to GB?

    i am doing a small podcast with my best friend "the joseph podcast" and we have a few celebrities calling in to our show, we can't believe it either, Angela Kinsey from "the office" and Charlie Day from "it's always sunny in philadelphia" and we were wondering what the best way to record a phone conversation would be. we need help and we are pretty much poor so keep it cheap. thanks so much!

    If I were trying to record something very important, likely "get one chance only" type of thing, I would not use GB to do the recording. I would use a tape recorder and then later transfer the recording to GB.
    I'd use something like this BELL-SONECOR TR-70 Tele-Recorder Adapter for $13.
    --HangTime [Will Compute for Food] B-|>
    Note: I am an Amazon Associate, if you purchase this item via my link I will get a small commission)

  • What is the best way to open emails and attachments without using wifi?

    For I-phone and I-pad, what is the best way to open emails and attachments without using wifi?  I turned off wifi in my settings but my boss thinks there may be another way and a better way to use something else instead of wifi.  Any help would be appreciated!  Thank you!

    Thanks!  That is a very good question you post.  My boss asked me that and I am assuming that he is having issues with using wifi wherever he is at.  My boss is the kind of person that when he asks something you look into it and ask him no questions...he's the only one asking questions!  But thank you for your response I will tell him the information you told me and hopefully that will help!

  • Best way to create tasks and assign to sharepoint groups

    Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
    I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
    they can mark it as completed.
    Is this the best way to go about it or am I completely off track?
    Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
    Thanks

    Hi  ,
    According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
    For the workflow, it is heavy  that  you need to create around 12000 (30*400) tasks .  In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
    blog:
    http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Best Way to Stack 2d and 3d in a Composite

    Hey everyone, it seems I'm really on a 3d binge with Photoshop CS6. It's just a blast! Anyway, I'm looking to figure out the best way to stack 2d and 3d items together in the same document, and maximize the editibility...
    I'm working on a digital room setting, and I have part of the room in 3d and part in 2d. So, for example, the walls, ceiling, floor, table, chairs and corner hutch are 3d, but the regular hutch and buffet server are in 2d.
    - The table and chairs need to be in the foreground
    - The regular hutch and server are behind the table and chairs
    - The corner hutch needs to be behind all other pieces of furniture
    So, you may be catching on by now to my little dilemna... I want all the 3D items to have the same lighting and reflect off one another, however, I need the 2d layers to somehow fit "inbetween" the 3d objects. The simple question is, how can this be done? Is there a way to mask the foreground 3D objects so that they appear to be in from of the 2D objects? My only current solution is this:
    - Move the whole 3D layer (the scene layer) all the way to the back
    - Make the final decision on the position of the table and chairs
    - Hide all other meshes in the scene besides the table and chairs
    - Render, so the edges are clean
    - Load the newly rendered 3D layer as a selection (which loads the table and chairs only)
    - Either create a new layer from the selection of the rendered 3D layer, or mask the 3D layer so that the table and chairs appear to be in the foreground
    I didn't anticipate this post being this long, so I apologize,... but as you can assume, the method above means I can no longer edit/reposition/scale the 3D at all, so if there's a better way to stack these room elements I would be extremely grateful to whoever knows how!
    Thanks!
    Andy

    First, I was wrong about layers needing to be hidden to prevent their appearance being included in a new Postcard. I misunderstood something that happened when working with a 3D document a while ago.
    Materials support transparency/opacity. A material has an opacity control that can use a texture. The material opacity percentage is multiplied by the opacity of the texture.
    When a Postcard is created, its default material's opacity control will contain an instance of the texture that's in the diffuse control, which is a PSB file containing the 2D layer (pixels, Shape, Smart Object or Group) from which the Postcard was created.
    Here is an example. Two solid Pyramid meshes and a Postcard of a cloud Shape layer:
    The Shape layer from which the Postcard was created is in the document that can be opened by picking Edit in the dropdown of the buttons highlighted above:

  • What is the best way to record a video(not big) for free on a mac w/isight?

    What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
    Thanks.

    Hi Carolyn,
    you can use iMovie to record a video for free on a Mac with iSight.
    1. Open iMovie HD
    2. Choose “Create a new project”
    3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
    4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
    5. Press “Record with iSight” in the main picture window.
    6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
    7. You are done!
    iMac G5 PPC 2,1 Ghz   Mac OS X (10.4.8)  

  • Best way to handle audio and video?

    Can someone give me suggestions on best way to handle audio and video clips. 2 issues:
    Audio- I want to avoid problems for visitors who may need to install something to listen, and would like them to be able to remain viewing page while listening. I understand how to set up the Iweb player option, and I understand how to simply link to a mp3 file that relies on the visitors player. I'm thinking I need to "embed a player" (?) which is something I haven't dealt with yet.
    Video- I have a link to a .mov file. It plays it in either a real small box, or if you enlarge it , the image deteriorates. Is there a better way to handle this?
    http://www.imaginerecoveryonline.com/IMAGINERECOVERYONLINE.COM/THE_JOURNEY_1.htm l
    Thanks for any help

    Yes that should work for what you want.

  • Best way to move data and programs to another profile on same Mac?

    Hello,
    What is the best way to move data and programs to another profile on the same Mac? I have a user who's profile is corrupt, I know that most programs will work on both the new and old profile however when trying to copy the Desktop folder, or Documents folder I am getting permissions denied.
    Sort of like weeding a garden, I'm hoping I do not have to pick the data in each folder and copy individually.
    Thanks for your help!
    Johnathon

    This usually means that a configuration or preference file is corrupted.  In this user's /Home/Library/Preferences/ folder locate any preference files associated with iLinc and drag to the Trash.
    I would also check in the /Home/Library/Caches/ folder for a file or folder associated with iLinc and delete as well.
    See if the problem is resolved in the user's normal account.
    It's not that you cannot copy data from account to account, but doing so causes a lot of permissions issues that must be resolved.  The MacFixit article I linked above shows what you need to do after transferring from one account to another in order to change permissions on the "foreign" files to those of the destination account.

  • Air mobile best way to implement drag and drop

    Hi all,
    I'm developing an application which allows people to drag and drop certain panels.
    But the dragmanager isn't optimized for the air mobile platform.
    What is the best way to implement drag and drop at the moment?
    Write it all yourself or are their some utility classes that can help?

    Hi all,
    I'm developing an application which allows people to drag and drop certain panels.
    But the dragmanager isn't optimized for the air mobile platform.
    What is the best way to implement drag and drop at the moment?
    Write it all yourself or are their some utility classes that can help?

Maybe you are looking for

  • ISE: Guest SSL Certificate Not Trusted Error

    Team, We are building an ISE Demo for an event, I configured the Guest Access and it is working fine. the problem is that when the guests (Event attendess) try to access the internet they will be reditrected to teh ISE for Guest Authentication. The g

  • Add gps information

    I know the all new Photos is not a Pro app like Aperture. But in Aperture it was possible to add gps information to photos quite easily. I was able to track my GPS with an App on the iPhone, export the data to an gpsx file, import that to Aperture an

  • Accessing COM/OLE2 Objects using Jdeveloper3.1

    We have created JSP files using JDEVELOPER 3.1. Now we need to open Microsoft Word 2000 document from JAVA(JSP) and enable the WORD macros. How do we open the word document and use the macros ? null

  • What happened to my toolbar?

    I have an application that uses the acro32.pdf library. I have Acrobat X installed on my machine. I did an update this morning and the toolbar is completely gone from my application. The same result with people running Reader X.

  • Publishing site and wingding font wont show?

    hello all i am working on a site and want to use a letter from the wingdings font collection. when i publish the site though the wingding does not show up, but rather its traditional substitute (in this case a J) is there a way around this or am i ju