Best way to replace contents of a layer with higher res image

I can do it, but I was wondering if there is a better way.
Large PS file (CS6 and CC) half a dozen texture layers using low res images. Several have blend modes, transparency and even masks. I now have the same images in high res. I want to replace just the image, but not lose my blend/transparency, or masks.
Any thoughts?
Do I bring in the high res layer, copy the mask over etc? Then delete the original?
Max

Try this.
Convert the low res images to Smart Objects. Layer > Smart Objects > Convert to Smart Object.
The replace the contenst of the smart objects. Layer > Smart Objects > Replace Contents...
This way you can replace the low res images with the hi res versions. Provided they are the same crop and aspect rarion your mask should be fairly good to go. I say fairly good as you may have made some adjustments (eg. feathering) based on the resolution.
The blend modes and transparency will be unaffected.

Similar Messages

What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?

I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks

OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
Does anyone have an answer to the original question....
"What is the best way to connect to a high end home stereo to retain the best sound?"
For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
For the record, I tend to hear just outside the normal human auditory range...
To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
so-called range we did!
For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
MBP Mac OS X (10.4.9)

What is the best way to re-build an iphoto library with 10,000+ images?

The iphoto built in library rebuild function does not find the 10,000 photos that are in my originals and data folders. Why not? Also, If I use the Fat Cat software to build a new library will it it create 10,000 new files?
I eventually want to remove these files from my computer all together, but I want to organize them first.
These photos used to be in iphoto, but when I upgraded to Mountain Lion my iphoto library kind of emptied itself.
Honestly, I would skip putting these 10,000 photos back into iphoto and simply put them on an external if finding the files in the iphoto library "folder" wasn't so complicated. It's not nesessary for me to store all of my photos on my laptop hard drive, but I'm an artists and a documentor so i would like to keep them.
Thanks for any and all advice!!!
I've been reading lots of threads on here and the information is soooo good and helpful. At least now I have some idea of how iphoto works where a few days ago it felt like magic!

Yes, move them:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Do you think iphoto's normal rebuild function might work when I'm telling it to look for my externally located library?
Impossible to say, but worth a try. If not then:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Best way to Replace OLD Time Capsule with a new one

What is the best way to replace an old Time capsule with a new Time Capsule in an existing wireless network?

IMHO..
Start over..
Put the new TC in place and configure .. completely differently to the old one. That means you have to go around and reset everything to connect if you use wireless.. and you should forget all the old configuration beforehand.
You can of course try and slip it in using identical names and identical settings.. but the computers are not fooled.. the BSSID is different. And other issues tend to arise.
Use naming that is short, no spaces and pure alphanumeric.
See Pondini post C9 here.
http://pondini.org/TM/Troubleshooting.html
It may take more time to start with.. depending on how many devices you have.. but in the end, you can get much less problems out the other side.. which are extraordinarily hard to diagnose and fix..
But that is IMHO.. others are welcome to dispute that and may find a full swap using old settings copied to a file and copied back to the new TC work fine.
There are any number of posts around about doing just that.
I will post one if I see it..
I do confess to being a bit of a purist when it comes to this stuff.. but then I used to do computer support and trying to fix the messes people got themselves into .. inevitably they tried to cut corners.. instead of doing the setup from scratch.

HT1589 what's the best way to move content to a new library I created ie a holiday music only library?

what's the best way to move content to a new library I created ie a holiday music only library?

Sophie:
Welcome to the Apple Discussions. You're only hope to recover the library as it once was is to: 1 - if you have a backup copy of your iPhoto Library or 2 - you can put everything back exactly the way it was in the Finder.
Otherwise you'll have to start over with a new library and import the Originals folder from your current library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Best way to replace move in iDVD project?

Hello,
I have an iDVD project started and realized I wanted to change a couple details in the iMovie I imported to the project. I can go back and correct the iMovie, but what's the best way to replace the current movie in the iDVD project with the revised iMovie? I'd rather not have to start a new iDVD project and add the pictures to the drop zones etc. Thank you, Rick H.

I forgot that if I hit 'return' the forum cuts what I write. Once I've got a movie in an iDVD project, what's the best way to replace that movie with a revised version (if I realize I need to make a couple changes in iMovie? Do you just go to the map and manually delete everything except the main title? Thanks, Rick.

Best way to replace source footage

I have about an hour of continuous source footage that I used to create a complex 15min edited version in Final Cut Pro X v10.0.5. After this project was already completed, I received a better quality version of the original 1 hour of source footage.
What would be the "best Final Cut Pro X way" to replace the original source footage with the higher quality new footage, without having to redo my complex edit?
Unfortunately, my new footage is slightly different frame rate, dimensions, and quality than the original, and also not exactly in sync.
I imagine this is the type of thing that professional editors must contend with all the time, but I'm not finding an efficient way to do this in Final Cut Pro X.
I've unsuccessfully explored three options:
1.) using the (new since v10.0.3) Relink feature
This is the workflow that seems most similar to those on other editors, however in Final Cut Pro X is seems this only works if the new media file is nearly identical to the old one. It explicitly states that it doesn't work with footage of different frame rates. And I also didn't see any way to sync to the old footage, if the new is slightly different length.
2.) importing as a new clip and syncing in the Event Browser
I see that I can sync two different clips in the Event Browser to create a compound clip, but how does this help me easily replace my already edited footage (which was not the new compound clip) with the new?
3.) using the (new since v10.0.3) Multicam editing
I know I can import the new source footage and sync to the old using Multicam editing, but again, how does this help me replace what was already edited from a non-multicam clip?
Suggestions?
Many thanks for any tips.

We also had a long debate on the same issue.
We decided to try the Soft-Code values instead of the Hard Code.
1. Create some custom tables which can hold the constant values. Like: We have some special processing for the normal sales Order ZOR1 and different logic for the Returns order ZRE1.
So, we have created
One table for the Group - NORM, RETN
One table for the Sales Order & Group relation.
NORM - ZOR1
NORM - ZOR2...
RETN - ZRE1
RETN - ZRE2
Create a View Cluster to maintain these tables easily.
2. Create a Classes which can fatch this data
Like: VALID_SALES_ORDER_TYPE
Definition-
Importing :
Sales Order type
Group
Exporting
Valid
Implementation-
Get the value from the table Sales Order & group relation
This class contains some other methods also, like VALID_GROUPS_4_SO, VALID_SO_4_GROUP etc.
Advantage: You can easily maitain a new Hardcoded value in the SM30
Disadvantage: Lots of coding
Another Approch:
You can create one Global class for Constants. You can maintain all your constants in that global class and use them in your coding. One main advantage would be, you can easily do the where used list on each individual constant.
Regards,
Naimesh Patel

What's the best way to print content of javax Object (JTable for example)?

Hi there,
1) I would like to know the best way to print content of jtable (for example)
2) I would like to know how can I Print content of SQL statment (for example "SELECT ID, NAME FROM COMPANY")?
Best Regard,
Eyal
[email protected]

Depends on what you want printed. You can do something like System.out.println(myTable);but you may not like what you see. If you want to print anything else, extend JTable and create a new toString() method that prints out what you want.
As for printing a SQL statement - assuming it is in a String, you can just do System.out.println(mySQLStatement);

What's the best way to replace front glass on an iPhone 4?

My grandson has a 4 and has cracked the front glass. Trying to find the best cost effective way to replace the glass.

i don\'t want an alias!! wrote:
What's the best way to replace front glass on an iPhone 4?
Take it to an Apple Store for out of warranty exchange fro $149.
This way you get a refurb iPhone including new battery.
See this -> http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149

What is the best way to replace the Inline Views for better performance ?

Hi,
I am using Oracle 9i ,
What is the best way to replace the Inline Views for better performance. I see there are lot of performance lacking with Inline views in my queries.
Please suggest.
Raj

WITH plus /*+ MATERIALIZE */ hint can do good to you.
see below the test case.
SQL> create table hx_my_tbl as select level id, 'karthick' name from dual connect by level <= 5
2 /
Table created.
SQL> insert into hx_my_tbl select level id, 'vimal' name from dual connect by level <= 5
2 /
5 rows created.
SQL> create index hx_my_tbl_idx on hx_my_tbl(id)
2 /
Index created.
SQL> commit;
Commit complete.
SQL> exec dbms_stats.gather_table_stats(user,'hx_my_tbl',cascade=>true)
PL/SQL procedure successfully completed.
Now this a normal inline view
SQL> select a.id, b.id, a.name, b.name
2 from (select id, name from hx_my_tbl where id = 1) a,
3 (select id, name from hx_my_tbl where id = 1) b
4 where a.id = b.id
5 and a.name <> b.name
6 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=7 Card=2 Bytes=48)
1 0 HASH JOIN (Cost=7 Card=2 Bytes=48)
2 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
3 2 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
4 1 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
5 4 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
Now i use the with with the materialize hint
SQL> with my_view as (select /*+ MATERIALIZE */ id, name from hx_my_tbl where id = 1)
2 select a.id, b.id, a.name, b.name
3 from my_view a,
4 my_view b
5 where a.id = b.id
6 and a.name <> b.name
7 /
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=8 Card=1 Bytes=46)
1 0 TEMP TABLE TRANSFORMATION
2 1 LOAD AS SELECT
3 2 TABLE ACCESS (BY INDEX ROWID) OF 'HX_MY_TBL' (TABLE) (Cost=3 Card=2 Bytes=24)
4 3 INDEX (RANGE SCAN) OF 'HX_MY_TBL_IDX' (INDEX) (Cost=1 Card=2)
5 1 HASH JOIN (Cost=5 Card=1 Bytes=46)
6 5 VIEW (Cost=2 Card=2 Bytes=46)
7 6 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
8 5 VIEW (Cost=2 Card=2 Bytes=46)
9 8 TABLE ACCESS (FULL) OF 'SYS_TEMP_0FD9D6967_3C610F9' (TABLE (TEMP)) (Cost=2 Card=2 Bytes=24)
here you can see the table is accessed only once then only the result set generated by the WITH is accessed.
Thanks,
Karthick.

What's the best way to replace a 60 W Mag Safe Power Adapter?

What's the best way to replace a 60 W Mag Safe Power Adapter for a Macbook Pro?

Buy one from Apple!!

The best way to replace the internal hard drive

Hi,
I have a MacBook with a 160gb hard drive which has been partitioned into two partitions one for OSX (130gb) and the other for Windows 7(30gb) and as you can imagine 30gigs for windows is almost nothing, the OS itself is taking a big percentage of its capacity, so I would like to expand both partitions by having a bigger hard drive installed but I was wondering what would bethe best way to do this so I don’t have to reinstall OSX and Windows 7, I have heard about Super Duper for OSX I don’t know if a similar software exists for Windows, well I don't even know if this is the way to go. So my question would is...
What would be the best way to replace an internal hard drive and have everything moved including the Operating Systems (OSX Lion and Windows7)?
Can someone be so kind and tell me the procedure I should follow to accomplish this task? I’m not expecting a step by step tutorial but if you could list the tools needed and a brief procedure it would be greatly appreciated.
Oh, I’m using Boot Camp for the Windows 7 installation.
Thanks a lot.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacingthe hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then partition and format the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one.
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
For copying the Windows partition I like WinClone http://download.cnet.com/Winclone/3000-2242_4-172338.html
After you've installed your Mac OS with Carbon Copy Cloner (or SuperDuper) on the new drive create a new Windows partition with Boot Camp and copy your WinClone copy to it with Winclone.

Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ? Thanks,

Hi, what's the best way to replace IMAC 27'' glass when broken (latest Imac generation from end 2012) ? Thanks,

Not sure about the 2012 models but the 2010 ones can be removed in seconds, using a suction cup on the top corner. I use my tomtom to lift it away. It is attached by magnets.
Hope this helps.

Dw, css, and a template, what is the best way to create a 20 page website with a different header in each page?

dw, css, and a template, what is the best way to create a 20
page website with different header content on each page? i am
trying to insert a specific image and background color for each
header on every page. what is the easiest or best way to do this?
thanks, bryan

"mediastream13" <[email protected]> wrote in
message
news:f47bes$9om$[email protected]..
> ok, murray, here is the site.
http://www.helphotline.org
> in I.E. 6 i can't see the background color behind the
header images,
I'm seeing a hot pink background (which is my browser default
- so that I do
remember to declare a background color). You need to add:
body { background-color: white;} to your stylesheet, or into
the imbedded
styles on your page.
In Firefox, the very top black section, #headertop is hidden
behind the
header image.
> background of the date/time isn't stretching the full
length of the
> screen, and
> the margins aren't working in the main content area. how
can i put a
> background
> color behind the header images?
I can see the header image stretching right across the page..
so not sure
what color is missing there.
> is there anyway to download i.e. six on my computer if i
already have
> i.e.7? i
> just want to be able to preview the site before i upload
the changes. it
> seems
> everything works in i.e. 7.
Yes, I used this and it works really well.
http://tredosoft.com/Multiple_IE
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

HT4260 I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?

I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.

The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired.

Best way to replace contents of a layer with higher res image

Similar Messages

Maybe you are looking for