Best way to save and view raw files while traveling.  I have dropbox but new ipad user and not sure of best way.

What is the best way to save photos when shooting RAW while traveling.  Would like to save raw files but also view and email from iPad.  I also have dropbox.  Will be in Europe next spring.

Unfortunately, the playback of non-iOS-native video formats (everything except mov / mp4 / m4v) is horrible through Apple TV and it, because of the inherent speed restrictions of Wi-Fi, can't be helped other than:
- pre-converting your video files to mov / mp4 / m4v before playing them. (THis is the best solution.) For this, you will want to use the absolutely best and fastest video converter, the free(!!!) HandBrake. Don't ever think of paying any money for any video converter - most other titles are way inferior to HandBrake. (See http://www.iphonelife.com/blog/87/benchmark-excellent-multimedia-converter-handb rake-vs-commercial-apps for more info on this q.)
- using a VGA or HDMI adapter and connecting your TV directly to the iPad.
In the thread at https://discussions.apple.com/message/18697551?ac_cid=sa123456#18697551 , we've also discussed this problem (AirPlay vs. cabled playback)

Similar Messages

  • Hi I am a new iPad user and would like to know how to ensure I am on wifi at my home instead of my providers network using up time. At the top of my iPad it says my providers name  and shows a signal strenght

    Hi I am a new iPad user and would like to know how to ensure I am using wifi instead of my network provider.  At the top of my screen it is showing my providers name and a signal strength. I have a router at home that I want it to use. I will also be traveling to Italy tomorrow and want to ensure it automatically hooks up to the wifi where we will be staying. Any help would be much appreciated.

    I copied this from another thread. I made the important line bold. Make sure that WiFi is turned on if you want to use WiFi first.
    After successfully connecting to a wireless network, the network and network settings are saved on your iPad. If wi-fi access is on, when returning within range of a wireless network you have successfully connected your iPad with, your iPad will automatically connect to the wireless network, or it should. If 3G access is on, when leaving the range of an available wi-fi network you have access to, it will switch to AT&T's cellular network automatically. If both are on, your iPad should switch between the two automatically and seamlessly. Your iPad will always connect to the fastest wireless connection available at the time as long both options are enabled. Between an available wi-fi network that you have access to and are in range of and AT&T's cellular network, it will or should be the wi-fi network.
    Here is the thread.
    https://discussions.apple.com/thread/2419363?start=0&tstart=0

  • I have bought  a new ipad mini and when i try to use app store asks me  my email but it does not let me review, it get blocks and does not let me tap review

    I have bought  a new ipad mini and when i try to use app store asks me  my email but it does not let me review, it get blocks and does not let me tap review

    You have to provide email to access app store,dont expect walk in and walk out

  • I have just bought new iPad Air and cannot get it to start.

    I have just bought new iPad Air and cannot get it to start. Am I doing something wrong or could there be a fault in the new iPad?

    OK - Item turned out to be faulty and was returned to seller for replacement. No futher follow-up required.

  • I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

    I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

    Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
    If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

  • I have a brand new iPad 2 and it is not being "seen" by iTunes for Windows (64 bit Win 7)

    I originally had my iTunes library (music, apps, etc) on a MacBook.  Used "home sharing" to drag over most of my collection to my new Windows 7 laptop.  All apps, music, etc show up fine in iTunes on Windows but when I unpacked my new iPad 2 and plugged the apple cable into the USB port on my Windows laptop and the other end in my iPad 2, no synching occured nor did the iPad 2 show up on the left-hand list on iTunes. 
    Any idea what might be wrong?  I did already try different USB ports.  Each time I plug and unplug I get the audible notification from my laptop that the cable is disconnected and/or connected.  so it's not a hardware issue. 

    A Couple of questions..
    Is the location shown under preferences/Advanced/General still showing the correct location?
    Is the check boxes under this checked or unchecked?

  • We are new ipad users and we're trying to download a film from itunes in Germany. It seems locked in aperpetual download mode. any suggestions?

    we are trying to download a movie on itunes in Germany and it just stays locked in perpetual dowlaoding mode. We are new ipad users. Any suggestions?

    How long have you waited to download this movie, and how fast is your internet connection?
    The movies can be a few gigabytes in size, so if could take a few hours to download if your internet connection isn't super fast.

  • I have bought a new IPad 2 and I want to give my old one to my Daughter.  How do I clear the old one and reinstall my appps to the new one?

    I have purchased a IPad2 and I want to give my old IPad to my daughter.  How do I clear the old IPad and transfer my apps and purchased item to the new IPad2?

    You can copy any purchased items that aren't already on your computer's iTunes via File > Transfer Purchases. If you want to copy everything over to the new iPad then you can back up the old iPad by right-clicking (command-clicking on a Mac) the iPad under Devices when connected to your computer's iTunes, and you can then restore that backup onto the new iPad.
    When you are happy that eveything has copied over you can log out of you account on the old iPad by tapping on your id in Settings > Store and then wipe its content via Settings > General > Reset > Erase All Content And Setings.

  • I have an A4 New iPad mini and a mid 2010 Mac Book Pro Can I get them all sinked with voice as i am loosing my vision?

    Hello Happy New year My name is Karen I have 3 Apple products A iPad mini version 16 GB  wi-fi no phone. A 4S 2011 16 GB. and a Mac Book Pro OS X Yosemite 10.10.. I'm loosing my vision and would like to sink the MAC and the iPad mini to voice commands.I also need them checked for iCloud to work on all for Dr. Appointments. What is the best way to go about having  the products serviced For my vision impairment? How much will it cost to get  all serviced to work together? the iPhone is all set I simply cannot read with it! Can someone assist me I live Near the Coconut point Mall.

    Doesn't work for your MBP.

  • TS3274 Hi, have just got new iPad 3 and am having difficulty receiving FaceTime calls from husbands iPhone 4s. IPad wasn't ringing at all and the iPhone would get a message saying iPad was unavailable for FaceTime yet we were using same Internet connectio

    Hi,
    Just got the iPad 3 which is our first and we were messing around with FaceTime between this and our iPhone 4s. The problem was we can FaceTime the mobile but we kept getting a message flag that the iPad wasn't available.
    After much deliberation and googling we have managed to get the iPad to at least ring when we FaceTime it from the iPhone but the new problem is it rings for half a second giving no one a chane to answer.
    Can anyone suggest anything else?
    So far we have checked in setting that all sounds are enabled, put slide switch to mute then flicked the mute button up and down on the side of the iPad above the volume and also changed the DNS numbers on both mobile devices to ensure they sync but I am still having the same problem.
    All answers greatly appreciated

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • We are new IPad users and can't access games. The message is invalid address

    We are new users trying to access games. We are getting an error about an invalid address or no address or something similar. Can someone tell us how to get into the games.

    You can't access what games?  Where can you not access these games. Where are you seeing this error message?  What exactly does it say?
    We aren't mind readers here so until you actually provide some specifics as to exactly what you're talking about, nobody could even begin to offer a suggestion.

  • Best way to send files like photos wireless from Macbook to iPhone/Ipad? And Then vice versa?

    What are the ways to send files like photos wireless from Macbook to iPhone/Ipad? And Then vice versa?

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • How do you view raw files on an iMac G5?!

    Hello there,
    I just recently received my first computer for 30 bucks. It's my first experience getting used to a home computer. I extracted some some rar files with "Unrar" but now I have these raw files, which won't view because I don't have the equipment it seems. I suppose "raw" means a type of photo file? Anyways I can't view these files until I get some kind of raw viewer. I've tried a handful of raw viewers but none of them really work. Most look like these funny documents that have no setup and I tried "fastrawviewr" which keeps saying archiving when I click it... Whatever archive means.. I also have this icon when I first got my iMac G5 name Macintosh hd, which was constantly trying to archive fastrawviewer. I have been stuck for 3 days now puzzled on how to view these raw files. Id appreciate some assistance, I can't continue with my project until I figure out how to view these raw files.

    Not sure if you could use a good software editor to convert or manipulate such
    large files in an older Mac. Usually RAW files take considerable space, use a
    ton of system resources, and require extra storage, memory RAM + larger CPU...
    And graphic processor with its own video RAM.
    •How to identify iMac models - Apple Support
    So with an old computer that may or may not be viable in its own limitation, you
    may have some time of it, to make use of it as you seek to do a project w/o much
    idea of what software still may exist.
    If you have a device that creates RAM image files, see if there is a way for it to
    make both jpeg and RAW or less huge files. Or only use the jpeg files and save
    the larger RAW files for some other time when you get a later model computer.
    •Graphic Converter - Lemke software:
    http://www.lemkesoft.de/en/download/
    see Graphic Converter version 6 or version 7
    There is a software by the name Graphic Converter available (may run in demo)
    that is a shareware. Note on their download page options and versions, the one
    you'd need for use with the old PowerPC based Mac would be of a vintage that
    may or may not be available. Their page should have an indication. While I had
    an old version of Graphic Converter for Mac, for a Tiger 10.4.11 system, I didn't
    use it much. Instead I used a combination of ToyViewer for Mac and the native
    Preview application to edit images. Graphic Converter has other capabilities.
    Not sure about the viability of or availability of the named software listed here:
    http://www.pure-mac.com/graphics.html as most titles and their home pages
    may not be available or could have survived but only for Intel-based late Macs.
    Some cameras came with software. Nikon offered a trial run of something they
    later sold, but that was limited in how it could work; later versions of the software
    won't run on older OS X systems. And huge files require extra system resources.
    Depending on the build model series Mac  you may be able edit some images OK.
    So what are the system specifications and available resources, by the numbers?
    You could look into everymac.com and/or get mactracker.ca database to compare
    your old iMac G5 specs to see what one you have. Also, you could go to a site &
    use it to see specs https://www.powerbookmedic.com/identify-mac-serial.php
    For certain software to run, the computer may need some kinds of hardware upgrade.
    Or some of the tasks could be well beyond the current status of the device.
    In any event...
    Good luck & happy computing!

  • Photoshop Elements 8 - unable to view RAW files

    Hi.
    I have been using Adobe Elements 8 since it came on to the market. I use Canon Cameras and my latest one being a 1Dmkiv.
    When I got the Canon 1D I down loaded the appropriate RAW file I think it was 5.6 and followed the instructions and changed the Camera Raw.8bi file and it worked perfect and I was able to view and edit Raw files.
    Last week my computer failed and I have had a new hard drive and hence have had to upload all my software. I installed Elements 8 back onto the computer and reinstalled the photograph catalogues I had backed up within Elements 8 before the computer crash.
    When the photographs in the catalogues were viewed only JPEG files were visible, the raw files are shown as a a grey negative with a zig zag across them. I thought that I would have to upload again the lates RAW update, which I did and went through all the instructions as given by Adobe. I changed the Raw.8bi file within Elements 8 and I still am unable to view any Raw files within Elements 8. I desperately need access to these files. Any help would be appreciated
    Best regards

    Thanks so much for your reply. My problem appeared to be that most of the thumb
    nails had lost their links and I had to individually update the thumbnails from within the program. It wasn't a problem
    with the RAW file not being updated.

  • Can't view RAW files in Organizer

    I have Elements 5.0 and I just downloaded the Adobe Camera Raw 4.5 (latest version to work with 5.0) and while I can now edit raw files, I cannot see them as thumbnails in Organizer.
    Is there something else I need to do?  Does Elements 7.0 fix this problem?  My camera is a Canon Xti.
    I am unable to view RAW files as thumbnails in Windows Explorer either, and have been told it's a Canon driver issue, but I don't think that is related.
    Thanks for any help.

    http://forums.adobe.com/message/2103808#2103808
    This advice also applies to your case, PSE5 and ACR 4.5 (by the way, 4.6 is the latest version to work with PSE5)

Maybe you are looking for