Best way to send Christmas cards by email?

Based on other comments I've seen on these forums I advised my work this week that they should send their Christmas card email by creating it in iWeb and then sending it as an HTML message by choosing "File > Mail Contents of This Page" in Safari.
The problem is the Director just called to say that one of our clients said all he could see was the text.
Any idea what has gone wrong here? And what do people recommend as the best way to send Christmas card emails?

Not every mail client is able to or setup to view HTML content in web pages. JBK's suggestion is a sure fire way to get the content of the card so that any client or platform can view it (unless they have display of image content turned off and they have to download the image file and open with an appropriate application).

Similar Messages

  • Best way to send GR document to email destination output printing

    When a goods receipt document is printed, I need to send an email with the document attached.  It does not matter if it goes to an external email address or to the SAPoffice (Workplace). 
    If it can not be triggered during GR output creation, I could just do it when the GR is processed.
    What is the best approach?  Can this be done in output determination or is there a user exit?
    Thanks!
    Norm

    This looks very helpful, but I still have one problem. 
    The requirement will allow me to check the PLANT.  This is perfect.  However, I can only set this up once per condition type.
    Details...
    I am using WE03.  WE03 needs to print.  I cannot define a requirement to stop WE03 for email, because it will stop it from printing.
    In SD, I would create a new output condition for email (like ZE03).  I could have a requirement on ZE03 to check PLANT and use it for email.
    I thought there were issues with new output types in MM.  The standard SAP processing programs have values hard coded.  I remember seeing things like "WE" being concatenated to "03" to form "WE03" in standard SAP code.  New output types like ZE03 will not work. 
    Maybe this has changed?  Maybe I am wrong?
    I will try it.

  • Best way to send multiple emails

    Hi,
    what is the best way to send different emails in batches in one
    smtp session? Lets say 50 emails in one smtp session.
    Is the smtp session closed after I call Transport.send() ?
    In general I can not find a hint when a smtp session gets established and when
    the session gets closed.
    Thank you for any suggestions,
    Oliver

    The answer is in the [JavaMail FAQ|http://java.sun.com/products/javamail/FAQ.html#rptsend].

  • What's the best way to send photos to a PC user?

    I'm new to the Mac world and need to know the best way to send photos to a PC user.

    Most if not all email have "Attachments" listed in the email menu.  Just click on it & follow the onscreen instructions.  Very simple. 

  • Best way to send a text to a number in Australia?

    So I have a BBRY BOLD, and the basic phone through Verizon and unlimited data plan through Blackberry.  Naturally, I never elected the world plan, because I didn't think I needed it.  But I now have a friend from Tasmania, and would like to know the best way to send her a text message without incurring additional charges, and without having to add additional services.  I have her Tasmanian Mobile number, but not her email, so I cannot email her.  Suggestions?

    I don't suppose she has a BlackBerry, does she? If she did, you could BBM to your heart's content for free.
    Otherwise, here's a link that explains rates and plan options:
    http://b2b.vzw.com/international/Text_Messaging/index.html

  • Best way to send an procedure/function output to the application

    Hello,
    What is the best way to send the output of a PL/SQL function / procedure to the application in Oracle 11g. I understand that it could be different for applications built in JAVA , .Net , SAP etc.
    Could you please give a brief overview on all possible application makes.
    Thanks,
    Haider

    Anyway, the answer is yes, v$version is derived from x$version :
    SQL> desc x$version
    Name                                      Null?    Type
    ADDR                                               RAW(8)
    INDX                                               NUMBER
    INST_ID                                            NUMBER
    BANNER                                             VARCHAR2(80)
    SQL> select INDX,BANNER from x$version;
          INDX
    BANNER
             0
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
             1
    PL/SQL Release 11.2.0.3.0 - Production
             2
    CORE    11.2.0.3.0      Production
             3
    TNS for Linux: Version 11.2.0.3.0 - Production
             4
    NLSRTL Version 11.2.0.3.0 - Production
    SQL>

  • Is there any easy way to send free invoice via email without my credit info

    Is there any easy way to send free invoice via email without my credit info?

    Depends upon what you mean by 'it failed'. If it's that you are getting a message to contact iTunes Support then no, you will have to contact them (the 48 hours should be the maximum time that it takes for them to reply).

  • Best way to send printer control codes?

    What's the best way to send printer control codes in Netware 3.12? Should I
    use a batch file that's run each time a particular queue is selected, or is
    there something I should be doing with a pconsole option? I'm trying to get
    rid of extra linefeeds and enable compressed printing. DOS environment, by
    the way.
    The printer in question is an Ithaca Pcos Series 50 ( #52 pn-06-0629), which
    isn't one of the standard ones listed in Pconsole etc. It may emulate a
    standard IBM though.
    Thanks-
    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

    > What's the best way to send printer control codes in Netware 3.12? Should
    > I use a batch file that's run each time a particular queue is selected, or
    > is there something I should be doing with a pconsole option? I'm trying to
    > get rid of extra linefeeds and enable compressed printing. DOS
    > environment, by the way.
    Never mind, I'm in a habit of answering my own posts these days. Just create
    a job configuration in printcon that uses a device with the appropriate
    device modes.
    Is it just me, or is Netware queue-based printing a bit on the obtuse side?
    Seems like it could have been made a whole lot easier (more linear?) to set
    up.
    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

  • Best Way To Send Arrays to ActiveX

    What's the best way to send array data to an ActiveX object? Do you
    have any examples that you can show me? Are there any alternatives to
    the "best way"?
    Thanks,
    Scott

    > What's the best way to send printer control codes in Netware 3.12? Should
    > I use a batch file that's run each time a particular queue is selected, or
    > is there something I should be doing with a pconsole option? I'm trying to
    > get rid of extra linefeeds and enable compressed printing. DOS
    > environment, by the way.
    Never mind, I'm in a habit of answering my own posts these days. Just create
    a job configuration in printcon that uses a device with the appropriate
    device modes.
    Is it just me, or is Netware queue-based printing a bit on the obtuse side?
    Seems like it could have been made a whole lot easier (more linear?) to set
    up.
    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

  • Best way to handle Christmas music - Playlist or separate Library?

    Anyone have a suggestion about the "best" way to handle Christmas music?
    After reading the article below I'm tempted to create a new library for Christmas music... that way I can keep it on an external drive or even DVD.
    http://www.allthingsmarked.com/2006/09/13/howto-manage-multiple-libraries-in-itu nes-7/

    My solution to this is to add the tag "Xmas" to the "Grouping" field of each Christmas song.
    This little tag stays tucked away out of sight until Christmastime. Then, I create a new Smart Playlist where Grouping contains "Xmas." Voila.
    The Grouping field can be useful for non-genre distinctions you want to add to your music, likesay "live" or "remix" or "cover."

  • Best way to send a jtextfield with a button action

    i have searched the internet and forums and cannot find this answer... does anyone have a best way to send the data in a jtextfield when a button is clicked? thank you.

    Window.java
    public class Window extends JFrame
        public Window()
            JPanel panel = new JPanel(new FlowLayout());
            JLabel hostLabel = new JLabel("hostname or IP address: ");
            JTextField hostname = new JTextField(20);
            JButton checkButton = new JButton("Check");
            checkButton.addActionListener(new CheckEvent());
            panel.add(hostLabel);
            panel.add(hostname);
            panel.add(checkButton);
    }CheckEvent.java
    public class CheckEvent extends AbstractAction
        public CheckEvent()
            super();
        @Override
        public void actionPerformed(ActionEvent event)
            System.out.println(event);
            boolean serverReachable = false;
            try
                InetAddress server = InetAddress.getByName(hostname);
                System.out.println("\t\tName: " + server.getHostName());
                System.out.println("\t\tAddr: " + server.getHostAddress());
                System.out.println("\t\tReach: " + server.isReachable(300));
                serverReachable = server.isReachable(30);
            catch (UnknownHostException e)
                System.err.println("Unable to lookup" + hostname);
            catch (IOException e)
                System.err.println("Unable to reach "+ hostname);
            return serverReachable;
    }My problem lies in the hostname jtextfield that i want to send the string to the CheckEvent.java.
    Thank you.

  • Best Way to send data from InfoProvider to DBTable

    Hi all,
    I need some advices on this subject :
    I want to send some data, stocked in several InfoCubes, to a table.
    This cubes are linked by a multicube (for queries).
    I don't know the best way to send the data in a table :
    - Use Open hub on each cube to send data
    - Use ABAP code for extract data directly from MultiCube (possible?)
    - Use open hub on multiprovider (I think it's not possible to plug a open hub to the Multiprovider...)
    What is the best practice on that?
    Can you help me please?
    Thanks in advance,
    Adrien.

    Oh yes, my mistake.
    I didn't think abuot the APD solution.
    I think it should be a good one...
    With the ABAP, it seems very difficult indeed.
    I'm gonna check this way ! Thanks for your help Daniel !
    And except the licence cost, the Open hub should be a good solution??
    Edited by: Adrien Loire on Oct 1, 2010 10:34 AM

  • Whats the best way of sending files ?

    whats the best way of sending files (mp3's) to another computer over the internet, been doing it over msn, but takes a while, is there any other way?

    Have you thought of using an intermediary file server, e.g. yousendit.com, rapidshare.de, etc? Alternatively, you could do it the computer-to-computer route by enabling either 'Remote Login' or 'FTP Access' (Sharing preference pane) on one and connecting with the other.
    As an aside, what you're doing isn't illegal, is it? Pardon my bluntness.
    Yang

  • Best way of sending signals between two VIs

    Hello all,
    I have two VIs. One that generate some complicated signals (sine wave, impulse, etc.). The other one takes manually inputted voltage and pressure send them out to some hardware with a pump, and reads back the output of the pump.
    What is the best way of sending the waveforms from the signal VI to the manual control VI? I still need to be able to control the signals manually in that manual control VI.
    Thanks.
    Solved!
    Go to Solution.

    nitad54448 wrote:
    hi
    For exactly this kind of process, I am using queues, FG and (relax ppl, I know..) global variables. If you are writting a global in one Vi and reading it in another (to prevent accidental (fake)updating); globals are easy to implement. Many people hate them (I do, sometimes) but for these kind of cases I think they are well adapted.
    For FG you need a user control and a vi for each variable you want to share... Both FG and globals are "bottle in the ocean" like of information : you send some info and sometimes this info will arrive somewhere...
    If you need to be sure that the info is passed then Queues are to be used...
    N
    While you may not run into race conditions using global variables in a write once/read many approach they do not protect you from some part of your application deciding to write to them. FG at least provide some level of protecting access while globals do not. In addition, global variables can create multiple copies of your data. If your data is large, this can be problematic. I much prefered using a defined messaging scheme. The intent is very clear and you can provide safe guards. Even FGs are better. I personally would never recommend the use of global variables even though some cases MAY work out. A defined API is always a prefered approach and helps to keep the code modular and decoupled. This leads to greater reuse. Global variables tie things together and make reuse more difficult.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • What is best way to make business cards in iwork

    what is the best way to make business cards.  is have iwork.  the business card templet doesn't seem to copy after you create the first card.  it wants each card on the temp. page to be filled in.

    You can buy a set of backup disks from Adobe for a nominal fee. You might want to give them a call and ask about it.
    Otherwise, just back it all up to an external drive.
    Bob

Maybe you are looking for