Best way to send map directions to iPhone?

What is the slickest way to send map directions prepared on the desktop to an iPhone, for use on the road?

Just to the right of the Directions tab click the action icon (box with a right facing arrow) then click: Send to (name) iPhone

Similar Messages

I want to find the best way to send my pictures from Aperture to CVS for processing. How do I do that? Also, there doesn't seem to be a good app to go from Iphone to CVS either. Please help

How do I easly send my pictures from Aperture to CVS for actual printing? I always have trouble finding my photos in the Aperture library when I need to load them into the CVS web interface. I can't even tell which photos they are without seeing them.
Also, what's the best way to do it from my Iphone. Doesn't seem to be a good app for that.

Export the adjusted version from Aperture to the Desktop. Download the exported version to CVS.
You shouldn;t be looking in the Aperture library (if by looking you mean using the Finder on the library). Use Apertures tools to do this. Besides the only thing you could get out of the library would be the original file that you imported into Aperture not the version with your adjustments.

Best Way to send data from InfoProvider to DBTable

Hi all,
I need some advices on this subject :
I want to send some data, stocked in several InfoCubes, to a table.
This cubes are linked by a multicube (for queries).
I don't know the best way to send the data in a table :
- Use Open hub on each cube to send data
- Use ABAP code for extract data directly from MultiCube (possible?)
- Use open hub on multiprovider (I think it's not possible to plug a open hub to the Multiprovider...)
What is the best practice on that?
Can you help me please?
Thanks in advance,
Adrien.

Oh yes, my mistake.
I didn't think abuot the APD solution.
I think it should be a good one...
With the ABAP, it seems very difficult indeed.
I'm gonna check this way ! Thanks for your help Daniel !
And except the licence cost, the Open hub should be a good solution??
Edited by: Adrien Loire on Oct 1, 2010 10:34 AM

How is the best way to read data from an iphone if you lost your itunes data after a crash?

How is the best way to read data from an iphone if you lost your itunes data after a crash?

How is the best way to read data from an iphone if you lost your itunes data after a crash?

What is the best way of putting music onto another iphone?

What is the best way of putting music onto another iphone for a different itunes account user and different phone carrier? multiple user accounts on my mac? or home sharing to put the music on? then they have their own itunes account for apps etc?

Hi DVX100Shooter,
Congratulations on getting your son a new iPad, I am sure he will enjoy it.
Family Sharing is one way of managing both purchases and content between members of a related group of people. Each member must have their own Apple ID. You can choose what music you wish to share with the family from your own account. See this article -
OS X Yosemite: Share purchases with your family
In particular the section titled Hide a purchase from other family members
The music library on your son's iPad is separate from yours, but under Family Sharing you agree to pay for all purchases made through the iTunes store. If you wish to control what is purchased you can set up the Ask to Buy option for any family member under adult age in your location. See this article for details -
Request and make purchases with Ask to Buy - Apple Support
Gift cards may not be used for billing of purchases under family sharing, with the exception that a family member may use gift cards to purchase their own content. See this article for information about Family Sharing billing policies -
Family purchases and payments - Apple Support
The shared family photo album is available to all family members.
Family Sharing - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Best way to send an procedure/function output to the application

Hello,
What is the best way to send the output of a PL/SQL function / procedure to the application in Oracle 11g. I understand that it could be different for applications built in JAVA , .Net , SAP etc.
Could you please give a brief overview on all possible application makes.
Thanks,
Haider

Anyway, the answer is yes, v$version is derived from x$version :
SQL> desc x$version
Name                                      Null?    Type
ADDR                                               RAW(8)
INDX                                               NUMBER
INST_ID                                            NUMBER
BANNER                                             VARCHAR2(80)
SQL> select INDX,BANNER from x$version;
      INDX
BANNER
         0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
         1
PL/SQL Release 11.2.0.3.0 - Production
         2
CORE    11.2.0.3.0      Production
         3
TNS for Linux: Version 11.2.0.3.0 - Production
         4
NLSRTL Version 11.2.0.3.0 - Production
SQL>

Best way to send printer control codes?

What's the best way to send printer control codes in Netware 3.12? Should I
use a batch file that's run each time a particular queue is selected, or is
there something I should be doing with a pconsole option? I'm trying to get
rid of extra linefeeds and enable compressed printing. DOS environment, by
the way.
The printer in question is an Ithaca Pcos Series 50 ( #52 pn-06-0629), which
isn't one of the standard ones listed in Pconsole etc. It may emulate a
standard IBM though.
Thanks-
--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com

> What's the best way to send printer control codes in Netware 3.12? Should
> I use a batch file that's run each time a particular queue is selected, or
> is there something I should be doing with a pconsole option? I'm trying to
> get rid of extra linefeeds and enable compressed printing. DOS
> environment, by the way.
Never mind, I'm in a habit of answering my own posts these days. Just create
a job configuration in printcon that uses a device with the appropriate
device modes.
Is it just me, or is Netware queue-based printing a bit on the obtuse side?
Seems like it could have been made a whole lot easier (more linear?) to set
up.
--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com

Best Way To Send Arrays to ActiveX

What's the best way to send array data to an ActiveX object? Do you
have any examples that you can show me? Are there any alternatives to
the "best way"?
Thanks,
Scott

> What's the best way to send printer control codes in Netware 3.12? Should
> I use a batch file that's run each time a particular queue is selected, or
> is there something I should be doing with a pconsole option? I'm trying to
> get rid of extra linefeeds and enable compressed printing. DOS
> environment, by the way.
Never mind, I'm in a habit of answering my own posts these days. Just create
a job configuration in printcon that uses a device with the appropriate
device modes.
Is it just me, or is Netware queue-based printing a bit on the obtuse side?
Seems like it could have been made a whole lot easier (more linear?) to set
up.
--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com

Best way to send multiple emails

Hi,
what is the best way to send different emails in batches in one
smtp session? Lets say 50 emails in one smtp session.
Is the smtp session closed after I call Transport.send() ?
In general I can not find a hint when a smtp session gets established and when
the session gets closed.
Thank you for any suggestions,
Oliver

The answer is in the [JavaMail FAQ|http://java.sun.com/products/javamail/FAQ.html#rptsend].

Best way to send a jtextfield with a button action

i have searched the internet and forums and cannot find this answer... does anyone have a best way to send the data in a jtextfield when a button is clicked? thank you.

Window.java
public class Window extends JFrame
    public Window()
        JPanel panel = new JPanel(new FlowLayout());
        JLabel hostLabel = new JLabel("hostname or IP address: ");
        JTextField hostname = new JTextField(20);
        JButton checkButton = new JButton("Check");
        checkButton.addActionListener(new CheckEvent());
        panel.add(hostLabel);
        panel.add(hostname);
        panel.add(checkButton);
}CheckEvent.java
public class CheckEvent extends AbstractAction
    public CheckEvent()
        super();
    @Override
    public void actionPerformed(ActionEvent event)
        System.out.println(event);
        boolean serverReachable = false;
        try
            InetAddress server = InetAddress.getByName(hostname);
            System.out.println("\t\tName: " + server.getHostName());
            System.out.println("\t\tAddr: " + server.getHostAddress());
            System.out.println("\t\tReach: " + server.isReachable(300));
            serverReachable = server.isReachable(30);
        catch (UnknownHostException e)
            System.err.println("Unable to lookup" + hostname);
        catch (IOException e)
            System.err.println("Unable to reach "+ hostname);
        return serverReachable;
}My problem lies in the hostname jtextfield that i want to send the string to the CheckEvent.java.
Thank you.

Whats the best way of sending files ?

whats the best way of sending files (mp3's) to another computer over the internet, been doing it over msn, but takes a while, is there any other way?

Have you thought of using an intermediary file server, e.g. yousendit.com, rapidshare.de, etc? Alternatively, you could do it the computer-to-computer route by enabling either 'Remote Login' or 'FTP Access' (Sharing preference pane) on one and connecting with the other.
As an aside, what you're doing isn't illegal, is it? Pardon my bluntness.
Yang

Best way of sending signals between two VIs

Hello all,
I have two VIs. One that generate some complicated signals (sine wave, impulse, etc.). The other one takes manually inputted voltage and pressure send them out to some hardware with a pump, and reads back the output of the pump.
What is the best way of sending the waveforms from the signal VI to the manual control VI? I still need to be able to control the signals manually in that manual control VI.
Thanks.
Solved!
Go to Solution.

nitad54448 wrote:
hi
For exactly this kind of process, I am using queues, FG and (relax ppl, I know..) global variables. If you are writting a global in one Vi and reading it in another (to prevent accidental (fake)updating); globals are easy to implement. Many people hate them (I do, sometimes) but for these kind of cases I think they are well adapted.
For FG you need a user control and a vi for each variable you want to share... Both FG and globals are "bottle in the ocean" like of information : you send some info and sometimes this info will arrive somewhere...
If you need to be sure that the info is passed then Queues are to be used...
N
While you may not run into race conditions using global variables in a write once/read many approach they do not protect you from some part of your application deciding to write to them. FG at least provide some level of protecting access while globals do not. In addition, global variables can create multiple copies of your data. If your data is large, this can be problematic. I much prefered using a defined messaging scheme. The intent is very clear and you can provide safe guards. Even FGs are better. I personally would never recommend the use of global variables even though some cases MAY work out. A defined API is always a prefered approach and helps to keep the code modular and decoupled. This leads to greater reuse. Global variables tie things together and make reuse more difficult.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Best way to transfer my music from iphone to computer

Best way to transfer mu music from Iphone to computer.

Make sure you phone is logged into the Apple ID you used to purchase this music in Settings>Store. If it isn't, tap the ID shown, sign out, then sign back in with the ID you used. You should then be able to see your purchased music on your phone in iTunes>Purchased>Music. Also be sure you computer is auhorized for this ID in iTunes>Store>Authorize this computer.

What's the best way to send photos to a PC user?

I'm new to the Mac world and need to know the best way to send photos to a PC user.

Most if not all email have "Attachments" listed in the email menu. Just click on it & follow the onscreen instructions. Very simple.

Best way to send a text to a number in Australia?

So I have a BBRY BOLD, and the basic phone through Verizon and unlimited data plan through Blackberry. Naturally, I never elected the world plan, because I didn't think I needed it. But I now have a friend from Tasmania, and would like to know the best way to send her a text message without incurring additional charges, and without having to add additional services. I have her Tasmanian Mobile number, but not her email, so I cannot email her. Suggestions?

I don't suppose she has a BlackBerry, does she? If she did, you could BBM to your heart's content for free.
Otherwise, here's a link that explains rates and plan options:
http://b2b.vzw.com/international/Text_Messaging/index.html

Best way to send map directions to iPhone?

Similar Messages

Maybe you are looking for