Best way to sequence tabbed cards flying in from left onto a stack?

I've got an idea for a stack of tabbed 4 x 5 cards (like used in a card file) to fly in from the left (or somewhere), one at a time - and go in between the two words of a logo - as the letters of the text logo are streamed in from left to right.
Would a throw be the best way to make this work - or is there some obviously better way I'm overlooking?
BTW - I'd love to be able to start with them all stacked, and work backwards while designing the effect - flying them off to the left - as it would seem to be easier to have them all line up this way? (but I'd still have them fly in from left and onto the stack when the effect was played)
I'm fuzzy on the best workflow to create this effect.
Thanks!

Mark - I've followed your steps.
My problem is that even though I import a sequence of images, and it shows 1:10, only the 1st image seems to get imported, the rest are white?
If I play the sequence, only the 1st plays, then I see white.
If I view all the images NOT as a sequence, I can import them all and all of them show up as individually colored tabs.
If I remove the 1st one from the import folder, and import so that the 2nd one is the 1st, then this one - with a different color shows up.
So - I'm totally confused - as I have the 'Motion 3 - designing and Animating Motion Graphics in FCS2' book in front of me, and they clearly outline how to import a sequence of planes - and how you can play the sequence and see them all.
I created the PDFs using Illustrator CS2 on a IBM PC. They are in RGB format. OSX and FCP can see them all, I can open each one up and view it.
But - I just can't seem to bring them into a valid sequence?

Similar Messages

What is best way to make business cards in iwork

what is the best way to make business cards. is have iwork. the business card templet doesn't seem to copy after you create the first card. it wants each card on the temp. page to be filled in.

You can buy a set of backup disks from Adobe for a nominal fee. You might want to give them a call and ask about it.
Otherwise, just back it all up to an external drive.
Bob

Best way to send Christmas cards by email?

Based on other comments I've seen on these forums I advised my work this week that they should send their Christmas card email by creating it in iWeb and then sending it as an HTML message by choosing "File > Mail Contents of This Page" in Safari.
The problem is the Director just called to say that one of our clients said all he could see was the text.
Any idea what has gone wrong here? And what do people recommend as the best way to send Christmas card emails?

Not every mail client is able to or setup to view HTML content in web pages. JBK's suggestion is a sure fire way to get the content of the card so that any client or platform can view it (unless they have display of image content turned off and they have to download the image file and open with an appropriate application).

What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

What is the best way to transfer my music and pictures from my old PC to my new Macbook Pro?

This may help;
http://www.apple.com/support/macbasics/migration/
Ciao.

What is the best way to copy a DVD i made from iMovie? It was HD720 and I don't want to lose any quality in the copies.

What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.

You will need to save it as a video to the camera roll.
Import it into windows as you would a photo.
Then purchase DVD authoring software, and create a DVD.

What is the best way to transfer apps, contacts, et cetera from one iPhone (3G) and computer (2006 MacBook) to a new iPhone (4S) and computer (early 2011 MacBook Pro)? I have already moved music, among other things using Migration Assistant.

What is the best way to transfer apps, contacts, et cetera from one iPhone (3G) and computer (2006 MacBook) to a new iPhone (4S) and computer (early 2011 MacBook Pro)? I have already moved music, among other things using Migration Assistant but I cannot locate contacts or Apps.

transfer just SOME of the applications
it's all or none, i'm afraid.

What's the best way to transfer (not forward) a call from one iPhone to another?

What's the best way to transfer (not forward) a call from one iPhone to another? Is there an app available that does this? I'm asking about receiving a call, then transferring that caller to another iPhone on a separate number and then disconnecting while those two users are joined up in a conversation.

Ask your carrier. This would be a feature provided by them.

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

What is the best way to backup my computer before upgrading from OSX 10.5.8 to 10.6?

What is the best way to backup my computer before upgrading from OSX 10.5.8 to 10.6? I just purchased a WD portable external hard drive.

Use Carbon Copy Cloner http://www.bombich.com/index.html or SuperDuper. http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html Both make a bootable copy of everything on your hard drive.

What is the best way to move my itunes music library from my old computer to my new one?

what is the best way to move my itunes music library from my old computer to my new one?

Home Sharing is option A.
http://support.apple.com/kb/HT3819
Option B is consolidating the library to an external HD.
http://support.apple.com/kb/ht1364
http://support.apple.com/kb/ht1751
Or you can use one of the other 8000 methods. I just prefer these two.

Best way to upload RAW photos to internet from iPad

If I am on a trip and 64GB isnt enough storage for my RAW photos (and I am without my MacBook Pro), what is the best way to upload my pics in full RAW format to an internet location. Apps? Best site to store them on in full RAW? Thanks for the help!

I just posted the same question. I also have a 64gb ipad, however, with movies and tv shows, games, apps for the trip, that only leaves 8-9 gbs. I could as you have suggested buy more SD cards for my camera..but was also hoping just to batch load 200-300 photos a day up to internet storage (which I am willing to pay for) and then dump them down when I get home. iDisk will do them 1 at a time, but that's not much of a solution. I have wifi where I am staying, so that isn't an issue. I wouldn't want to use a 3g data plan as the roaming would cost more than the trip. This would just let me bring just my camera & ipad (with camera kit). I was hoping to avoid a laptop too.
Can it just not be done yet? Do I need to lug around my 13" macbook pro as well? My main question is not where can I get internet storage, but how do I get large amounts of photos off the ipad to that storage? idisk, dropbox, etc. Don't seem capable of transfering large amounts of pictures FROM the ipad.
Thanks!
Message was edited by: Mark Shykula

What Is the best way to upload and download psd files from Photoshop to Photoshop Touch? [was:Re]

What Is the best way to up load and down load psd files from desktop photo shop to photo shop touch? For on the go touch up or. I'm using psd files at 90 percent 300 depi when in photo shop on desktop. To ps touch

Hi Bford225,
I'd recommend using your favorite web browser and going to https://creative.adobe.com/files for uploading from the computer.
Keep in mind tablet capabilities are much less than a computer, so large files might take a long time to download and be very system intensive to work on. Although you can import files up to 12 megapixels I'd recommend something more mid range, like 6 or 7 megapixels, ie 2880 x 2160 or 3072 x 2304.
Also, PSD files are flattened when imported into Photoshop Touch.
Hope that helps,
-Dave

What is the best way to send large, HD video files from the iPad?

Hello,
My department is looking to purchase between 50 and 150 new iPads. We hold conferences where participants take short, 3-minute videos of themselves in situations they have been trained for. The idea was that after they have taken the video, they could simply email these videos to themselves, negating the need to hook the device up to a computer, transfer the video over to a flash drive, and ensure that drive gets back to the right person.
Now that I have the first one, I'm finding any video longer than 45s or so can't be sent via email because it's too large.
Are you kidding?
The file I was just able to send was 7.5MB. That's the biggest video I can send from this thing? Why even give us the ability to take HD video if we can't *do* anything with it?
But, I digress.
What I'm looking for is the best way to get video off the iPads and into the hands of our participants. Are there apps on the App Store which might convert whatever video we take to an emailable size? I thought about setting everyone up with Apple IDs and having them use iMessage since there is no limit on file size, but of course you must own an Apple device in order to do that, and it still doesn't solve getting it on their computers.
Any help here would be greatly appreciated.
Thanks!
--Rob

You could try uploading them to a joint dropbox account that they could then download them from....but how fast it is will depend on the internet connection available.

What is the best way to move all of my data from an iPad 4 to an air?

Santa brought an iPad Air and I need to transfer my data and apps from the old iPad I have had. Help on the best way to do this since I played with the new machine yesterday and some of the things transfered but not all.
Thanks!

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

Flex/AS3 Best way to construct a derived class instance from an existing base class instance?

What is the best way to handle the instantiation of a derived class from an existing base class.
I have a base class which is being created via remote_object [RemoteClass alias] from the server.   I have other specialized classes that are derived from this baseclass, but serialization with the server always happens with the base class.     The base class has meta data that defines what the derived class is, for example
[RemoteClass (alias="com.myco...')]
public Class Base
     public var derivedType:String;
     public function Base()
public Class Derived extends Base
     public "some other data"
     public function Derived()
In my Cairgorm command which retrieves this object from ther server I want to do this:
public function result (event: Object):void
    var baseInstance:Base = event.result;
     if (baseInstance.derivedType = "derived")
          var derivedInstance:Derived = new Derived( baseInstance );
What is the most efficient way of doing this?   It appears to me that doing a deep-copy/clone and instantiation of the derived class is pretty inefficient as far as memory allocation and data movement via the copy.

Thanks for the assistance. Let me try to clarify.
MY UI requires a number of composite classes.    The individual components of the composite classes are being transfered to/from the server at different times depending upone which component has changed state.    The construction of the composite classes from the base class happens in my clients business logic.
Composition happens in a derived class; but server syncronization happens using the base class.    When I recieve the object from Blazeds through the remote object event, it is in the form of the base class. I then need to instantiate the derived class and copy the elements of the base class into it (for later composite construction).   And likewise when sending the base class back to the server, I need to upcast the derived class to its base class.   But in this case just a mere upcast does not work. I actually need to create a new base class and copy the attrbutes into it. I believe this is limitation of how remoting works on Flex/AS3.
My question is, what is the best way to turn my base class into it's derived class so further composite construction can take place.   The way I am currently doing it is to create a load method on the base class, that takes the base class as on argument. The load function, copies all of the instance attribute references from the base class to the target class.
public Class Base
     public function Base()
     public function load(fromClass:Base)
    { // copy the references for all of the instance attributes from the fromClass to this class }
Then, after I recieve the base class from the server.   I create a new derived class and pass the base class into the load function like this:
            for (var i:int=0; i < event.result.length; i++) {
                var derived:Derived = new Derived();
                derived.load(event.result[i]);
The drawbacks of this approach is that it now requires 2 extra instance creations per object serialization.   One on recieving the object from the server and one sending it to the server.    I assume copying references are pretty efficient. But, there is probably some GC issues.     The worst of it is in code maintenance.   The load function now has to be manually maintained and kept in sync with the server class.
It would be interesting to hear how others have solved this problem.      The server side is an existing application with around 2M LOC, so changing the code on the server is a non-starter.
Thanks for your help.

Best way to sequence tabbed cards flying in from left onto a stack?

Similar Messages

Maybe you are looking for