Best way to transfer data between iMac early 2006 and iMac late 2012
What is the best way to transfer data between iMac early 2006 and iMac late 2012?
HI, is this for Migrating all data ove, or just File Sharing?
What OSX version is in he older one?
Do you have any backup external drive for the older one?
Similar Messages
-
What is the best way to transfer data from a PC to an iMac?
What is the best way to transfer data from a PC to an iMac?
If you know how to set up a computer-to-computer Ethernet network, then you can give that a try, but a hard drive will be faster than Ethernet unless you don't have a lot to transfer.
Mac OS X 10.6 Help- Creating a computer-to-computer network -
Best way to transfer data between loops?
Hi, whats the best way to transfer data between loops(state machines, regular while loop etc) in labview. For so many years ive been using local variables but these can cause race conditions. Anyone advise?
StuIt depends one the structure of the loops and how they need to exchange data (unidirectional, bidirectional, broadcasting).
The simple case of one loop passing data to the other loop: producer/consumer design pattern using a queue
If the structure already contains an event structure: User Events
The way I code is documented in my community nugget on events
I often mix this with producer/consumer.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
Best way to transfer data between loops in FPGA VIs
Hi,
I'm using a FlexRio Board PXIe 7962, with an I/O module 5781.
I've set the Top level Clock to 80MHz (Base Clk 40M), and I'm implementing two loops in the FPGa VI: In the first one, I'm using a SCTL (20M) where I'm getting Digitized Data (1.5MHz) from the NI 5781, then multiplying it by a DDS Signal (1.8MHz), then I'm filtering (band-pass around 300kHz)) the product.
My question is: If what I've implemented is correct, what is the best way to transfer the first loop data running at 20MHz, to the second one running at 1MHz ? (without loosing Data of course since the signal interest is at 300kHz)
and similarly : what is the best way to transfer the second loop data running at 1MHz, to a Host VI ? DMA FIFOs?
Thank you in advance,
Zouhair
Attachments:
Diagram.png 158 KBZouhair wrote:
I've set the loop timer in the first frame to 4 clock ticks of 80MHz, so I imagine that what follows should not work under 20MHz, Am I mistaken?
Yes you are. That SCTL will execute in the 20MHz clock time. Everything else in the loop is just adding to that time.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Best way to move date between LabVIEW 7.1 and 2010
We have a large LabVIEW based control and data acquisition system that for reasons beyond the scope of this post is at and needs to stay at LabVIEW version 7.1 for the forseeable future... We are soon to add a camera diagnostic to this system that, again for reasons beyond the scope of this post, needs to be written in LabVIEW 2010... The 2010 piece of code will run and need to receive some information such as shot number, when to trigger, etc. from the 7.1 side of the system... Then after a shot has occurred and a camera image has been acquired, the 2010 code will do some on the fly processing of this image and within a few seconds will need to send back some results data to the 7.1 side...
The 7.1 code uses a tag engine approach to sharing data among different codes running on different machines... I think now that more modern versions of LabVIEW use a shared variable approach... But I need to communicate as I've described above between the two versions, 7.1 and 2010 (or it could be 2011 if that would offer some advantage)...
I'm new at this moving of data between versions like this so if something could offer some advice, especially if there is some tutorial information on this topic, that would be much appreciated... Thanks in advance for any help that you might be able to offer... thanks... bob...It really depends if your tag engine like communication approach is a home brown solution or something like the LabVIEW DSC engine. If homebrown and well written you should be able to reuse the client library part of it in newer LabVIEW versions without to many hassles. If it is LabVIEW DSC it may be a bit more complicated since the only means to share DSC tags in version 7.1 was as far as I can remember their proprietary TCP/IP tag interface, which was replaced in newer versions with he shared variable engine.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Best way to transfer video between iphone and mac wirelessly?
Please suggest me the best way to transfer files between mac and iphone wirelessly.Mainly for videos.
If you want to transfer photos and videos from the Mac to the iPhone (but not in the other direction) you can use iTunes and sync via wi-fi: http://support.apple.com/kb/HT1386
If you want to wirelessly tranfer videos in the other direction you may want to look into a 3rd party app such as http://www.photosync-app.com Note that I have not used that app so be sure to investigate others as well. -
What's the best way to transfer everything from my 5-year-old iMac to my 1-year-old iMac?
What's the best way to transfer everything from my 5-year-old iMac to my 1-year-old iMac?
I'm doing role reversal with these two. The newer imac is becoming our business computer, the older one will be our personal computer from now on until it gives out. For the record, I have Carbonite on the business unit. Should be a no-brainer, right? (Which is precisely why I'm asking!)
Thanks for whatever timely and accurate advise you may have.Thanks. I stumbled across migration assistant later that afternoon in a google search. Just finished using it today to do the deed. Appreciate your quick response!
-
Best way to "transfer" Aperture images from MacBook Pro to iMac?
I recently purchased a MacBook Pro 15" to import and edit images (within Aperture and CS6 as an external editor) when I'm out in the field shooting.
I prefer to have all my images in one location and thus desire to copy eveything to my home base iMac when I return home.
What is the best way to "transfer" those images so that my homebase iMac Aperture Library can recognize the new masters and edited versions? Complicating this is the desire to "stamp" each image with a metadata preset upon import that I can do either at the laptop import or upon transfer to the iMac.
I know just enough to be dangerous but clearly there is an optimal way to consolidate and manage images when using two computers.
Welcome any thoughts from fellow photographers!
ChrisThanks Kirby. I utilize Aperture 3 by reference instead of a compiled library. So I have individual folder/projects stored on my laptop. By exporting as a library, does Aperture bring these folders and related images "with it"?
What I don't want to lose is any post processing I do in the field which creates separate versions and/or .PSD files.
Thanks for your continued assistance.
Chris -
My 5 year old iMac recently died. I just purchased a new one and it arrived today. I have time machine back ups from the old iMac. Mt question is what is the best way to transfer the data from my time machine back up to my new mac? Should I use time machine or should I use migration assistant?
When the Setup Assistant on the new one you will be given an opportunity to restore from a Time Machine backup. If you're out of the Setup Assistant then use Migration Assistant. Be sure you have your TM backup drive connected.
-
Best way to transfer data from other computer
I'm wondering what is the fastest, or most reliable way to transfer data from another computer to my G5. I've skimmed through manual for G5 and it seems to list several options, if I'm understanding it correctly.
1. Using Airport Extreme
2. Using Bluetooth
3. Hooking up a local Ethernet connection
4. Setting up a Firewall connection?
I want to be able to transfer a completed iDVD project created on an iMac G3 to my G5 for burning the DVD. And which method (if any) will work with a non-Mac computer?
Anyone know the advantages, disadvantages of the transfer methods?
ccCarolIf you have a high-speed connection, another easy & fast way to transfer files between computers is through AIM (AOL Instant Messenger).
iChat has the same ability of transferring large files as AIM.
http://docs.info.apple.com/article.html?artnum=150934 -
Best way to transfer data to new internal hard drive
Hi,
I just got a new internal hard drive for my macbook and I'm trying to figure out the best way to transfer all the data from my old hd to the new one. Basically, I would just like to make an exact copy of my old hd and put it on the new larger one. Thanks for the help.Will I simply be able to do a firewire transfer on the new internal HD is installed
Yes. Use Carbon Copy Cloner with the sopurce and destination volumes reversed after installing the new drive.
Additionally do I need a bootable copy of OSX on my external HD to do the transfer?
Yes; the clone can act as this copy. If you copy everything with Carbon Copy Cloner, you will be told whether the drive will be bootable or not prior to the clone.
(33676) -
Best way to export data with r.t. prompts and have dense dim mbrs on rows?
Hi All-
What is the best way to export data with Run time prompts out of Essbase?
One thought was to use Business Rules with run time variables and DATAEXPORT command, but I came across at least one limitation where I cannot have months (part of dense Time Periods dimension) on rows.
I have only two dense dimensions: Accounts and Time Periods and I need both of these on rows. This would come handy when user enter Start and End month and year for data to be exported e.g. If start period is Feb 2010 and end is Jan 2011, I get data for all months in 2010 and 2011.
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000",14202.24,14341.62,14560,13557.54,11711.92,10261.58,12540.31,15307.83,16232.88,17054.62,18121.76,18236
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000",19241,21372.84,21008.4,18952.75,23442.13,19938.18,22689.61,23729.29,22807.48,23365,23915.3,24253
"CORP1","0173","FY11","Working","Budget","Local","HSP_InputValue","404000",21364,22970.37,23186,27302,25144.38,27847.91,27632.11,29007.39,24749.42,27183.39,26599,27112.79
where ideally I would need to get the following:
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Feb",14341.62
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Mar",14560
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Apr",13557.54
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","May",11711.92
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Jun",10261.58
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Jul",12540.31
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Aug",15307.83
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Sep",16232.88
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Oct",17054.62
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Nov",18121.76
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","402000","Dec",18236
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Feb",21372.84
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Mar",21008.4,
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Apr",18952.75
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","May",23442.13
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Jun",19938.18
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Jul",22689.61
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Aug",23729.29
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Sep",22807.48
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Oct",23365
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Nov",23915.3
"CORP1","0173","FY10","Working","Budget","Local","HSP_InputValue","403000","Dec",24253
"CORP1","0173","FY11","Working","Budget","Local","HSP_InputValue","404000","Jan",21364
Thank you in advance for any tips.Have a read of the following post :- export data to sql
It may give you a further option.
Cheers
John
http://john-goodwin.blogspot.com/ -
Best Way To Transfer Data To New Mac
I know this question has been asked ad naseum, but I can't seem to find exactly what I'm looking for today...
My new iMac arrives today (w00t!) and I want to transfer all my data over to the new computer. But I'm coming from a Mac that is four years old (though still running Lion) and there's probably a lot of crap on the old machine like corrupt preferences and whatnot, and I don't really want all that baggage coming over with me. I obviously want to transfer over my documents, iTunes and iPhoto Libraries and all the iWeb stuff and whatnot. I'm not afraid to reinstall my apps, if that's the ideal scenario and I don't care if my settings and dock reverts to deault, if that's the best way to do this. So I'm trying to determine the best (and possibly fastest) way to load up the new Virgin machine. I have the ability to connect the two computers via Firewire and I also have an up-to-date Firewire Time Machine Backup of everything as well. Any and all advice is appreciated. And don't be afraid to tell me I'm crazy and that I shouldn't worry about corrupt stuff and I should just Set Up Assistant or Migration Assistant (though I hear Set Up is better?) Thanks!If all you want to migrate is the data files then use Pondini's Setup Assistant guide as instructed. It will ask what you want migrated however if you only choose data it will migrate ALL of your data files. If you have some files you don't want to migrate then it may be best to start the old machine in Target mode after setting up the new machine then you can pick and choose what data files you want to copy over to the new machine.
-
Best way to transfer data from one MBP to another
Hi there,
In few days time I'll be swaping MBP 15 Retina (os 10.9.3) for new one. Some thech issues with the current one. Have to send old and will get new.
TM Backups runs automaticaly Airport Time Capsule (wireless).
What is the best and safest way to transfer whole data?
How to setup Time Machine? Any special settings for last backup before will send it?
How to get all stuff back on the new one?
About 150GB on HD.
ThanksMake a bootable backup/clone of your current machine onto an ext HD. Better than restoring from TM. Then, when you get the new machine, on first boot (assuming whoever's providing it to you hasn't already set it up), follow the steps in Pondini's Setup New Mac guide, migrating from the bootable backup/clone.
-
The best way to transfer videos between devices and mac?
I have an iphone 4s, ipad and a macbook pro - is there any way to transfer videos wirelessly betwen these platforms?
As far as I know icloud only allows photostream of photos only but nit videos. This is quite inconvenient for video users as I normally take videos using my iphone 4s and would like to edit using ipad/mac's iMovie. I suppose I could transfer videos using a wire between iphone and Mac (still a PAIN without being able to transfer wirelessly), and what about between iphone and ipad? I understand Apple might be concerned about storage and speed for video transfer via icloud, if we could selectively do the transfer and have the option to delete them from icloud after the transfer it will be very much easier for video editor like myself.
Or have I just missed something? Is there indeed a way to do so??If you want to transfer photos and videos from the Mac to the iPhone (but not in the other direction) you can use iTunes and sync via wi-fi: http://support.apple.com/kb/HT1386
If you want to wirelessly tranfer videos in the other direction you may want to look into a 3rd party app such as http://www.photosync-app.com Note that I have not used that app so be sure to investigate others as well.
Maybe you are looking for
-
I download flash player 11.1.102.55 now my flash player does not work
I download flash player 11 .It says I have 11.1.102.55 version and plug-in version not instilled. I am running window xp service pack 3 with internet explorer 8. in my manage ad-on I see shockwave flash object 10.0.42.3. it is marked enable. I have
-
Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis. I had finally managed to find time to find a local service provider last week (not eas
-
Need Active Ingredient table field & its calculation from batch chars
Hi All, Creating a report where Active Ingredient(AI) table field is needed. Further per batch AI content need to be determined based on AI characteristics in batch & planned value of AI in material master for a material. Please help me in finding ou
-
AFAB - Repeat Run & Restart Run
Hello Sap Experts Can anyone kindly explain the situation we need to use "Repeat Run" & "Restart Run" available in AFAB. Kindly expain. Thanks & Regards Deepak Garg
-
I am having problems posting to facebook with my Iphone 4s. I am admin on a couple of pages in facebook, and everytime I comment on one of those pages I post as the page. How can I change the settings so that I can post as myself.