Best WM for seemless projectors

At my school for plays, sometimes we just show a movie for part of the events when the actors are too lazy to act certain parts of the play. The problem is that when we start the projector it shows a blue screen of embarrassment. I was thinking that using a Tiling Window Manager with a black background could solve this problem (simply start the projector before people get there.)
What window manager comes closet to this:
* Monocle mode: Make one app full screen with literally NOTHING else (no border, no status bar, hidden mouse, nothin')
* Dual Monitor: Prepare an app on one screen (say a laptop) and then send it to another (the projector) seemlessly
* Completely Empty screen: Allow a monitor to be completely empty when it has no app
I was thinking that xmonad with some config stuff comes close (turning borders off) but I wanted to know what my other options were. xmonad handles multi-monitor very well but vanilla version has borders. ratposion is good at having no frills, but I am not sure if it can send apps to other windows. awesome has a ton of window decorations.
Any recommendations?

I'm using i3 and it certanly can do the first and the third thing. And I've read i3 is good with multiple screens.
For the first thing just use full screen, and move the mouse to the side of the screen or to another screen (you have two).
For the third i3 can define what it will draw (if it will draw) in status bar and if there are no windows open it has no title bar to draw resulting in a completely empty screen (with a bit of configuring).
For the second (I don't have two screens to try this) you could open a second workplace (virtual desktop), setup an application and send it to another workplace. As your setup would be what Windows calls extended displays I don't know exactly how i3 would behave.
EDIT: If you want it can be configure to have 0px window border, but it won't reflect on the fullscreen mode.
Last edited by bstaletic (2014-10-15 00:24:45)

Similar Messages

Which is the best and least expensive projector to show powerpoint presentation from a MacBook Air?

I would like to know the best and least expensive projector to use with MacBook Air to dispaly a powerpoint presentation.

Do you mean a external cd/dvd drive that connects by usb port? If you do then any brand will work. It does not have to be a apple brand for it to work on your mac. Most go for around $30 in the usa.
I use a asus brand that cost me just under $30. Works on any computer it is connect to.

Best method for refreshing a component's data?

What's better when you want to refresh the content of an object? Should you just replace your JComponent with an entirely new one, or should you try to get access to the data and then remove the items and then re-add them.
In my example, I have a JTree and am not sure which would be the best method to use. Should I try to remove all the nodes, or sometimes I think it would be easier to just remove the tree component from my panel, create a new tree and re-populate it?
Thanks for any advice.

pjbarbour wrote:
I'm not quite sure what would be the best method for this. My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed. I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2). I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed. Is this the best method for achieving this? Or would you do something else? I don't like the idea of scaling my timeline down in Premiere.
Hello.
As Jim so rightly points out above, you do not need to do anything.
Just use your normal 16:9 widescreen footage, and author as normal.
Your player will letterbox automatically when it is connected to a 4:3 screen in setup (just make sure "Pan & Scan" is not also there)

Best Method for converting a 16x9 video to a letterboxed 4x3 DVD

I'm not quite sure what would be the best method for this. My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed. I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2). I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed. Is this the best method for achieving this? Or would you do something else? I don't like the idea of scaling my timeline down in Premiere.

pjbarbour wrote:
I'm not quite sure what would be the best method for this. My client is using a 4x3 screen and SD projector at a large meeting, and they want me to just create a DVD that is letterboxed. I have one Premiere CS5 project that's 1920x1080, and another project that's 720x480 widescreen (1.2). I created a new sequence in both projects that is 720x480, 4x3 (0.9), and what I do is just scale the timeline down so that it's letterboxed. Is this the best method for achieving this? Or would you do something else? I don't like the idea of scaling my timeline down in Premiere.
Hello.
As Jim so rightly points out above, you do not need to do anything.
Just use your normal 16:9 widescreen footage, and author as normal.
Your player will letterbox automatically when it is connected to a 4:3 screen in setup (just make sure "Pan & Scan" is not also there)

Best codec for delivering 1080p video in flash

I'm developing some AS3 that will end up in a mac projector (.app).
This app will stream 1080p videos from the local disk.
What is the best codec for fluid videos? (no hiccups, fast start, etc)
Is there any special setting I have to consider in the code or in the publish settings?
TIA

bump

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Best-practice for Catalog Views ? :|

Hello community,
A best practice question:
The situtation: I have several product categories (110), several items in those categories (4000) and 300 end-users. I would like to know which is the best practice for segment the catalog. I mean, some users should only see categories 10,20 & 30. Other users only category 80, etc. The problem is how can I implement this ?
My first idea is:
1. Create 110 Procurement Catalogs (1 for every prod.category). Each catalog should contain only its product category.
2. Assign in my Org Model, in a user-level all the "catalogs" that the user should access.
Do you have any idea in order to improve this ?
Saludos desde Mexico,
Diego

Hi,
Your way of doing will work, but you'll get maintenance issues (to many catalogs, and catalog link to maintain for each user).
The other way is to built your views in CCM, and assign these views to the users, either on the roles (PFCG) or on the user (SU01). The problem is that with CCM 1.0 this is limitated, cause you'll have to assign one by one the items to each view (no dynamic or mass processes), it has been enhanced in CCM 2.0.
My advice:
-Challenge your customer about views, and try to limit the number of views, with for example strategic and non strategic
-With CCM 1.0 stick to the procurement catalogs, or implement BADIs to assign items to the views (I experienced it, it works, but is quite difficult), but with a limitated number of views
Good luck.
Vadim

Best Practice for Securing Web Services in the BPEL Workflow

What is the best practice for securing web services which are part of a larger service (a business process) and are defined through BPEL?
They are all deployed on the same oracle application server.
Defining agent for each?
Gateway for all?
BPEL security extension?
The top level service that is defined as business process is secure itself through OWSM and username and passwords, but what is the best practice for security establishment for each low level services?
Regards
Farbod

It doesnt matter whether the service is invoked as part of your larger process or not, if it is performing any business critical operation then it should be secured.
The idea of SOA / designing services is to have the services available so that it can be orchestrated as part of any other business process.
Today you may have secured your parent services and tomorrow you could come up with a new service which may use one of the existing lower level services.
If all the services are in one Application server you can make the configuration/development environment lot easier by securing them using the Gateway.
Typical probelm with any gateway architecture is that the service is available without any security enforcement when accessed directly.
You can enforce rules at your network layer to allow access to the App server only from Gateway.
When you have the liberty to use OWSM or any other WS-Security products, i would stay away from any extensions. Two things to consider
The next BPEL developer in your project may not be aware of Security extensions
Centralizing Security enforcement will make your development and security operations as loosely coupled and addresses scalability.
Thanks
Ram

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Best Practice for utility in Sol Man 4.0

We have software component ST-ICO of release 150_700 with Patch level 5
We want a Template Selection for Utility industry. I checked in
the service market place and found that 'Baseline Package United
Kingdom V1.50, Template: BP_BLKU150' is available in the above software
component.
But we are not getting any templates other than 'BP_UTUS147 - Best Practices for Water Utility' in the 'SOLAR_PROJECT_ADMIN'
transaction.
Kindly suggest any patch needs to be applied or some configuration need to be done.
Regards
Mani

Hi Mani,
Colud u plz give me the link of "where u find the template BP_BLKU150"?
It will be helpful for me.
Thanks
Senthil

I phone 5 need to use antivirus? If i need to use antivirus which is best app for i phone 5

I phone 5 need to use any antivirus ? If i want to use which is the best app for i phone 5

It is certainly not a virus. There are none.
Try the basic troubleshooting steps.
Start here: http://www.apple.com/support/iphone/assistant/phone/#section_1
Sometimes all that is required is to restart the iPhone.
The final step is to restore it. Always back up your iPhone first.

Best OS for mid 2009 MacBook Pro?

Hi everyone,
I have a MacBook Pro from mid 2009 with the following specs:
2.8 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
I had OSX Lion on it with no problems, but recently decided to upgrade to Mountain Lion to be able to use the Messages app on the computer. For the first few days, upgrading had seemed to speed everything up! The Messages app is super buggy, but I was very happy to have upgraded. At this time I also created a new user and copied over about 400 GB of data from my desktop. Everything worked fine after this for a while... but a month later, things have gotten BAD. Applications take forever to open, everything is sluggish. I've tried repairing disk permissions, but it hasn't helped.
I'm wondering if maybe Mountain Lion is too much for the computer? Does anyone have any experiences to report about performance? I think I'm going to do a complete wipe and reinstall of the OS, and am wondering if I should go back to Lion, stick with Mountain Lion, or maybe even upgrade to Mavericks or Yosemite (though I suppose those would be too much for the computer).
Any insights or experience welcome!
Thanks.

My personal opinion is that Snow Leopard is the best OSX for your MBP. It still is the most efficient from Apple.
If you need applications that will only run on newer OSXs, then that is not an option for you.
Have you gone into the recovery partition and opened Disk Utility>First Aid?
Also consider installing the maximum RAM (8 GB) that you MBP will accept, especially of you have thoughts about Yosemite. An SSD would speed things up, but the cost is still rather high.
Ciao

Best Practices for SRM Installation !!

Hi
can someone share the best Practices for SRM Installation ?
What is the typical timeframe to install SRM on development server and as well as on the Production server ?
Appericiate the responses
Thanks,
Arvind

Hi
I don't know whether this will help you.
See these links as well.
<b>http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
http://help.sap.com/bp_scmv150/index.htm
http://help.sap.com/bp_biv170/index.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul

Best practices for ARM - please help!!!

Hi all,
Can you please help with any pointers / links to documents describing best practices for "who should be creating" the GRC request in below workflow of ARM in GRC 10.0??
Create GRC request -> role approver -> risk manager -> security team
options are : end user / Manager / Functional super users / security team.
End user and manager not possible- we can not train so many people. Functional team is refusing since its a lot of work. Please help me with pointers to any best practices documents.
Thanks!!!!

In this case, I recommend proposing that the department managers create GRC Access Requests. In order for the managers to comprehend the new process, you should create a separate "Role Catalog" that describes what abilities each role enables. This Role Catalog needs to be taught to the department Managers, and they need to fully understand what tcodes and abilities are inside of each role. From your workflow design, it looks like Role Owners should be brought into these workshops.
You might consider a Role Catalog that the manager could filter on and make selections from. For example, an AP manager could select "Accounts Payable" roles, and then choose from a smaller list of AP-related roles. You could map business functions or tasks to specific technical roles. The design flaw here, of course, is the way your technical roles have been designed.
The point being, GRC AC 10 is not business-user friendly, so using an intuitive "Role Catalog" really helps the managers understand which technical roles they should be selecting in GRC ARs. They can use this catalog to spit out a list of technical role names that they can then search for within the GRC Access Request.
At all costs, avoid having end-users create ARs. They usually select the wrong access, and the process then becomes very long and drawn out because the role owners or security stages need to mix and match the access after the fact. You should choose a Requestor who has the highest chance of requesting the correct access. This is usually the user's Manager, but you need to propose this solution in a way that won't scare off the manager - at the end of the day, they do NOT want to take on more work.
If you are using SAP HR, then you can attempt HR Triggers for New User Access Requests, which automatically fill out and submit the GRC AR upon a specific HR action (New Hire, or Termination). I do not recommend going down this path, however. It is very confusing, time consuming, and difficult to integrate properly.
Good luck!
-Ken

Best WM for seemless projectors

Similar Messages

Maybe you are looking for