Beta Expired - Have Flex 2
I'm a flash dev, I use Flex 3 beta to write code because I
prefer it's error checking. I have a valid Flex 2 license, which I
entered into Flex 3. Now Flex 3 beta has "expired". All my projects
have been converted to Flex 3 so reverting back to Flex 2 is a
monumental pain in the arse, and I had expected Flex 3 to be
released by now... While I recognise that one response could be
"don't use a beta to develop with" is there any way that I can
further extend the Flex 3 beta until I can purchase it?
Thanks peterd_mm
Sorry I should have specified more clearly. Yes, I downloaded
and installed Flex 3 beta 2. That gave me a bunch of errors. Then,
after deleting all flex things from my applications folder and all
config files that they place in the documents folder (why do they
do that? that folder's for documents, or so I thought...) I
reinstalled it without problems. 60 more days. On entering my Flex
2 license it says I have 136 more days.
Similar Messages
-
Adobe Flex Builder 3 beta expiration
Hi Everyone,
I'm currently developing an application for Education
purposes in the UK using Flex Builder 3 beta (Built in Eclipse).
I struggled all the day with Adobe France, Adobe Europe,
Resellers to find a solution : our products will be locked in 5
days because we will be at the end of the demo.
I looked for education licenses for Flex Builder 3 beta, and
it seems that it's not possible for now. They told me to ask there
for a solution.
How can we continue working on Flex Builder 3 beta ?
Regards
EricWe're in the same boat here - the the behavour of xsd:all in
BETA 3 renders our Flex app virtually useless because of
communication issues with the backend webservice. We have studied
the proposed workaround suggested, unfortunately we only control
the FLEX app - we do not control the WS we have to integrate with.
As a result we've gone back to BETA 2 to do some critical
changes in the software but the "Beta expired." message we've been
receiving is really not well received. As we have been very
proactive in supporting development in the BETA phases including
reporitng bugs, we think that Adobe shoudl also have some
flexibility here and offer ways to extend the BETA 2. We're not
asking for any type of support during that phase - purely the
ability to compile our source until we can implement the full work
around which will allow the software to run on BETA 3. The
suggestion to change dates or go to previous restore points do not
work well here with our numerous developers. -
Will renewed Beta expire?
I've recently renewed my Flash Builder 4 Beta with my Flex 3 serial number. Will this new Extended version expire at some point? I don't want to be in the middle of developing something and have it stop working.
Regards,
Jason VillmerHi Jason,
The beta will expire near the end of this year. However, it should not be an issue. We plan to release a beta 2 prior to your beta expiring.
Vera -
What is better for RIA - FLEX or Silverlight?
What is better for RIA - FLEX or Silverlight? Any experience
here...
" Microsoft Silverlight 1.0 beta availability. Optimized for
the Web, Microsoft Silverlight enables developers and designers to
easily use existing skills and Visual Studio and Expression Studio
tools to deliver media experiences and rich interactive
applications. Silverlight works with any back-end Web platform or
technology, seamlessly integrating with existing infrastructure and
applications, including Apache and PHP, as well as JavaScript and
XHTML on the client. Beta 1.0 includes a go-live license, which
means customers can deploy their Silverlight applications in
production. Final availability of Microsoft Silverlight 1.0 is
scheduled for summer 2007."
Best Regards
AttilaI imagine that the Microsoft folks are really proud of
Silverlight -- I mean, they have been fighting the shift that the
Internet has caused from the beginning--pure client/server dies
hard. From the MS-only folks, Silverlight is a breath of fresh AIR.
I am glad that Microsoft has finally seen the RIA wisdom and joined
in with the rest of the world. I mean, how long was Java on the
scene before C# magically appeared; I am glad that they finally saw
the writing on the wall.
Personally, I don't care if you use Flex or Silverlight; just
that you use whatever for the right reasons. Flex has ample
documentation for me and the example apps far outshine anything
that I have seen in Silverlight. I found Flex to be pretty simple
to learn too. As Silverlight was only announced in April 2007, I
seriously doubt that "shakro" has actually gotten around to doing
any real work -- Flex at least has been around since 2004. I know a
lot of people that are building production-grade Flex/AIR
applications. I don't know anyone that is seriously considering
using Silverlight.
But then, that is my circle --- take my experience with a
grain of salt. Just also make sure to take the Microsoft fanboys
with a grain of salt too. -
Would like to know which /beta/ I have from beta channel
About Firefox says (today) I have version 25.0, which is what it said when I had an update waiting. I then accepted the update, so I should have a version that is different than I had before, but About Firefox didn't change what it showed me.
At one time the About Firefox dialog did show us beta channel people which beta they had.
I looked at the "Troubleshooter" data posted with this question and I can't see how YOU (Firefox developer) can tell which beta I have.I have a different version than I had before, so it's not as simple as "you still have [the beta of] Version 25". My question is similar to, "I had 25 dollars and some change, and then I found a penny, how much money do I have" and someone tells me I still have 25 dollars. It's not wrong, but it's not what I want to know. I want more precision.
-
Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID. -
Is it better to have two ati radeon HD 5770 or one ATI radeon HD 5870 for video editing?
Is it better to have two ati radeon HD 5770 or one ATI radeon HD 5870 for video editing? I'm basing this question based on the current options when configuring a Mac Pro. Currently there are three options
ATI Radeon HD 5770 1GB
Two ATI Radeon HD 5770 1GB [Add $250.00]
ATI Radeon HD 5870 1GB [Add $200.00]
Between the second and third options I am wondering which will provide a better more productive experience for video editing. Such as using FCP or FCPX. I know how many monitors that are in use will affect the answer to this questions. While I'm more focused on which option will deliver a better video editing experience, lets just say for argument sakes that the Mac Pro is running a 30" cinema display and a small generic monitor. About 18". Its an older VGA monitor for web development.
I hope thats enough info to get an answer on this subject.
ThanksYa in my research of this question, I came across this whole issue of Mac not being able to use CrossFire. I didn't thorugly investigate what this CrossFire issue was, but if it makes more sense with the singel 5870 rather than the 2 5770 then thats helpful to know.
If the Mac can't make the most out of two 5770 because it doesn't make use of CrossFire, it seems silly that Apple even bothers to offer it as an option. Plus its cheaper with the singel 5870 versus two 5770. Unless you really needed to run several monitors.
Thanks. This satisfies a long curiousity I have had. -
Better to have temp tables or create/drop
Greetings:
This is a question more for the DBA types out there. Generally speaking, if you need a place to store temp. data from a forms application, is it better to have a temp table sitting out there all the time and just truncate it, or create/drop the table as needed? I wondering from a performance standpoint but also, which is worse as far as fragmenting my tablespaces?
Thanks
[email protected]It's better to have it sitting there. Moreover, that table would better have a column (say sesssid) that would be populated with the return of userenv('sessionid') which corresponds to audsid from sys.v_$session.
So, you may periodically run a stored proc that deletes the rows having sessid values that does
delete from temp_table where sessid
not in (select audsid from sys.v_$session).
So, you won't be deleting the data needed by the currently running sessions.
Creating and dropping temp tables gives much fragmentation and degrades performance.
null -
we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.
I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students! -
Better to have outer join or to have for all entries
Hi Gurus
I have one select query taking lot of time to retrieve data.
My question is Is it better to have a outer join or should i go with For all entries.
SELECT distinct sbukrs skunnr sumskz sgsber sbschl swaers
sblart szfbdt sgjahr sbelnr sbuzei sbudat
swrbtr sdmbtr sshkzg crzzrprctr
APPENDING TABLE gt_data_a
FROM bsad AS s
LEFT OUTER JOIN zcce1a as c
ON sbukrs = crbukrs
AND sgjahr = crefryear
AND sbelnr = cbelnr
AND sbuzei = cbuzei
AND sSHKZG = cDRCRK
AND c~REFDOCCT = 'W'
AND c~RLDNR = 'Z1'
AND c~RVERS = '001'
WHERE
s~bukrs IN s_bukrs
AND s~kunnr IN s_kunnr
AND s~umsks IN s_umsks
AND s~umskz IN s_umskz
AND s~augdt IN s_augdt
AND s~augbl IN s_augbl
AND s~zuonr IN s_zuonr
AND s~gjahr IN s_gjahr1
AND s~belnr IN s_belnr
AND ( sbudat IN s_budat1 AND sbudat LE p_stida )
AND s~augdt GT p_stida
AND s~bldat IN s_bldat1
AND s~cpudt IN s_cpudt
AND s~waers IN s_waers1
AND s~xblnr IN s_xblnr
AND s~blart IN s_blart
AND s~monat IN s_monat
AND s~bschl IN s_bschl
AND s~shkzg IN s_shkzg
AND s~gsber IN s_gsber
AND s~mwskz IN s_mwskz
AND s~dmbtr IN s_dmbtr
AND s~wrbtr IN s_wrbtr
AND s~hkont IN s_hkont
AND s~filkd IN s_filkd
AND s~zlsch IN s_zlsch
AND s~zlspr IN s_zlspr
AND s~mansp IN s_mansp
AND s~mschl IN s_mschl
AND s~madat IN s_madat
AND s~manst IN s_manst
AND s~maber IN s_maber
AND s~rstgr IN s_rstgr
AND s~projk IN s_projk
AND s~xref1 IN s_xref1
AND s~xref2 IN s_xref2
AND s~imkey IN s_imkey
AND s~fistl IN s_fistl
AND s~dabrz IN s_dabrz
AND s~kostl IN s_kostl
AND s~cession_kz IN s_cessio.
Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting - post locked
Edited by: Rob Burbank on Sep 15, 2009 9:52 AMHi Sandeep Sharma,
Table BSAD is having below primary key fields...
BUKRS
KUNNR
UMSKS
UMSKZ
AUGDT
AUGBL
ZUONR
GJAHR
BELNR
BUZEI
Now the Question is In your selection screen what and all fields you kept mandatory ??
Try to make some of these above fileds as mandatory which may fit one of the index of BSAD table...
Different Available Indexes on BSAD is as below...
Index for logical database
MANDT
KUNNR
BUKRS
AUGDT
AUGBL
GJAHR
BELNR
BUZEI
Index using settlement run (payment cards)
MANDT
BUKRS
CCBTC
Index for Invoice Reference
MANDT
BUKRS
REBZG
REBZJ
REBZZ
KUNNR
UMSKS
REBZT
Index for Line Item Access
MANDT
BUKRS
BELNR
GJAHR
BUZEI
Index for BW Extract
MANDT
BUKRS
CPUDT
Also code in both the way... and check the time of execution for the queries... Actually it(Performance) depends on data as well as selection criteria...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
When I use my iPhone Siri for dialing, it is better to have the names in the address book listed singularly. But when I want to print envelopes from the address book in a formal manner - "Mr. & Mrs. Smith". Is there any way to have both options?
Only way I can figure is having double entries one with singular + some unique field, (maybe called Siri), then making a Smart group for one or both.
-
Standard v Professional and when does this beta expire?
I just saw the email from adobe that included this little
nugget of info:
We're also offering new Flex 3 packaging and pricing when it
ships in early 2008.
Adobe Flex™ Builder™ 3 Standard Edition
$249
Adobe Flex™ Builder™ 3 Professional Edition
$699
Flex Builder 3 Professional Edition adds the following
features:
* Data visualization and charting components
* Memory and performance profilers
* Flex test automation framework
This appears to be great news for us that just to pure AS3
development as I don't use the charts and such. The memory and
performance profilers seem interesting but I'm not sure they are
$450 interesting.
Why not an ActionScript developers edition? Take out the Flex
designer and add back the memory / performance profiler and sell it
for the same $250....Just a thought. Would be great for people like
me...and for those that just want a better AS editor for CS3.
So this says that Flex 2 pricing will be effected Nov 1, I'm
assuming that this beta will run for 30 days and then I could by
flex builder 2 for $250 and then enter that serial number and run
until flex builder 3 is released, at which point I'd need to buy a
second license for flex builder 3 standard for $250....which means
that I could end up with flex builder 3 now (running beta then full
version) for the same $500 that I can get flex builder 2 for
today...as long as I plan out my trial/ purchase.
Thanks for listening Adobe!
C.I've read all this info in a couple of places. The fact
remains, here on November 2nd, that when I go to the adobe web
site, to purchase my copy, the price is still $499 for the standard
version of 2, and $299 to add charting. my boss is ready, willing,
and able over here to buy Flex2, with I guess the "support" package
to allow getting flex3 when it ships. But, why spend $499 for a
product that is supposed to have dropped about in half? Where is
the magic place to go to get the new pricing? -
Hello,
ever since I upgraded to the latest nightly builds about two weeks ago (SDK 4.1) I get the error mentioned above, and the design mode of Flash Builder 4 Beta 2 doesn't work any more:
Design mode could not load he.enwipe.core.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
Design mode could not load PureMVC_AS3_MultiCore_1_0_5.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)
and also all other "swc" inside my project that do not come directly from the SDK or Flash Builder.
Any ideas what could be the cause?Hi,
Did you switch your projects build option to merge into code rather than have runtime libraries generated.
David.
[edit'] I really should sleep a bit more- I miss read the question, but you will probably need to break down your project to see what the issue is mxml by mxml, one thing is that any mxml headers need to halo name space renamed to mx.
as below -
xmlns:mx="library://ns.adobe.com/flex/mx" -
CS6 beta expired, now CS4 won't start
I had Photoshop CS4 installed on my Mac, then installed Photoshop CS6 beta and uninstalled it after its trial expired. Unfortunately, CS4 now reports "license expired" at start, and then quits. I have my CS4 serial number but I don't know where to get its installer. I'd appreciate any help.
Adobe Forums: FAQ: How do I uninstall the Photoshop CS6 beta?
Direct Download Links for Adobe Software
Mylenium -
Getting a beta expired error when trying to open LR3.2
I used LR earlier today, but now it says the beta version has expired and will not quit. I purchased the full version a couple of months ago and have used daily since that time. What can I do? I can't open LR at all.
I think this may have been my problem!!! After trying to install from the disk and the .exe in my program files, I downloaded the August 31 update. It didn't look like it wanted to work, but it finally did and is now working. (Just tried it again, to be sure!)
Thanks for your help. I was freaking out there for a bit.
Maybe you are looking for
-
About FM CM_F_INITIALIZE
What is this fm used for? any document about it?
-
Hi All, I have a simple validation: PL/SQL: Expression: :P301_PROJECT_DUE_DATE > :P301_PROJECT_XFR_DATE Both items are defined as Date Picker (DD/MM/YYYY) However the validation only seems to compare the values of DD so: Case 1 ====== :P301_PROJECT_D
-
I compile with -Xlint to be sure to catch warnings about potential problems in my code. Unfortunately, -Xlint spews out so much spam, it's difficult to pluck the few important warnings from the vast majority of unimportant ones. About 60-70% of my wa
-
I have no bars with an x on top of it,
I have no bars with an x on top of it, if i get a bar i cannot make a call. it won't allow me to turn on my mobile net work. I have no idea what to do
-
I am useing the EOS Rebel T3, and am haveing a lot of problems with makeing my pictures clear and crisp, as i think they should be. I have used numerous mode settings, and camera settings, but nothing has made my pictures clear and crisp. I have e