Beta releae of ODT for VS2005 - how to get a copy?

I have been told that I can be added to a list so I can receive the beta version when released? Could you point me to the correct place to do this?
Thanks
Eric

When is it scheduled for release?
I'm only working with VS2005 and would like to learn and use Oracle tools...
ODP + ODT with 10g express (and later with 10g 2nd release).
Is it stable so I could start using it and be a beta tester?
Thanks and good day,
Gal Rozov.

Similar Messages

  • Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?

    Anyone know how to get a copy of a IBM 7845I2 Recovery Disk?, My multipoint switch is stuck in read only mode -  Please use Recovery Disk to check the file system using fsck.

    Hello Elizabeth,
    Did you read the title of my post?  I am simply asking if anyone knows how to pull a history of repair records.
    This page https://www22.verizon.com/secure/pages/requestrepair/ clearly states "You can view a history of past repair requests." Unfortunately, I cannot find anywhere on that site where one can do that. So, I am asking for user to user help on finding out how to gain access to that information.

  • How to get a copy of stagecraft (flash lite 3.1) source distribution

    Hi everyone,
    I am a PhD student doing embedded system development. As the flash lite for digital home is pretty attractive to me, I am wondering how to get a copy of stagecraft (flash lite 3.1) source distribution. I cannot find download link anywhere. Does it require a license or is it free? Can anybody tell me how to get a copy of that. Your help will be highly appreciated.
    Seamus

    Adobe usually license to OEMs or operators on a per-unit royalty basis for each device. Not for small clients or individuals. You can get commercial-grade flash player source code from Zeeis, many embedded devices vendor use Zeeis Embedded Flash Layer to play SWF files.

  • How to get a copy of my contacts phone numbers

    how to get a copy of my contacts

        enza,
    We understand the importance of having your contacts. You can run Backup Assistant and log in online at verizonwireless.com. It will have all of your contacts listed for you.
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • How to get a copy of the receipt Ipad 16GB 3G?

    How to get a copy of the receipt Ipad 16GB 3G which was bought of the apple store on 767 Fifth Ave New York ?

    I want to send a message, but I do not know who and where.
    Ipad 2 purchased on Fifth Avenue in New York, on the first day of sales.

  • In ME2N  report for PO- How to get or add Vendor name in ALV grid output

    Hl Everyone
    How to get  or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
    cuurently i am in 4.7 E version.
    Kindly suggest..........
    thanks in advance
    Regards
    Prashanth

    Hi Pankaj
    I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
    Kindly suggest
    Regards
    Prashanth

  • SAP Cloud for customer how to get the Account ID and UUID from cloud

    Hi Experts,
    I have small requirement in cloud for customer.
    How to get all the account id with UUID in excel sheet using any SDK or other ways?
    Any way to get this information because i have tried using "Mass Data Maintenance" but not getting any information. 
    anyone know how can i get this information in cloud system?
    Many thanks,
    Mithun

    Hi Mithun,
    In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
    Thanks
    Sunil Maurya

  • Specialized icons for home, how to get them?

    I've read before that common folders in home can have specialized icons (i.e. one for Documents, another for Music...) but for the life in me I can't remember how to get them?  Anyone know how?

    hi,
    have a look here: <a href="http://help.sap.com/saphelp_470/helpdata/en/08/51421d43b511d182b30000e829fbfe/frameset.htm">CO External Data Transfer</a>
    Andreas

  • SAP Cloud For Customer How to Get the IP Address of Tenant

    Hi Experts,
    I need to know how to get the IP Address of our cloud Tenant ?
    Can anyone know please tell me the process.
    Many Thanks
    Mithun

    Hi Mithun,
    In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
    Thanks
    Sunil Maurya

  • Insurance claim for music - how to get print out of purchases from itunes

    Can any one help me as my Hard Drive crashed yesterday and i've lost all my Music, movies etc purchased from itunes in the last 2 years. Need to know how to get a detailed print out from itunes to prove purchase and claim on insurance. And yes i know i should have backed up my recent files...

    The only way is to log into your iTunes Store account (you'll need a working computer with iTunes installed, of course), go to your Purchase History, and do a screen capture of each successive page. There's no way to print out a full listing of all your purchased in one go.
    Regards.

  • USB Controller Driver cannot be found? How to get a copy....

    My USB Controller on my mother board keeps comming up as uninstalled drivers.  I have XP with SP-1 installed.  This is happening all of a sudden.  It has been working fine form many months.  I cannot force the system to find the drivers, and the MSI site has none to download.  Has anyone seen this happen before, or do you have any suggestions on how to get my USB ports working again.  
    I have already deleted the controller device and tried to let auto detect install the drivers.  It still cannot find them on the system or the CD that came with the mother board.  
    Any help is appreciated.  
    thanks in advance... ;(

    that is strange cause any windows later than 95 auto detects system devices. And can you tell us what board do you have in your system. if you write to this forum you must have a via chipset motherboard so goto Via Arena and download latest chipset drivers.

  • Verizon tech support for FIOS - how to get around the attitude.

    Most are helpful, but some are rather disdainful of macs or linux, or act surprised if you have more than one computer.
    A: Well, if I only had one computer, why would I need a router?
    Linux does not need any special support, and in fact runs quite beautifully on FiOS and the router without any setup at all. It recognizes the router and self-adjusts with DHCP auto. Actually it's much faster and less flawed than Windows.
    Linux doesn't have any recognized or known virus. At all. FUD is generated at various times during calls to FiOS support when I make the mistake of mentioning linux. They act like it's going to break their network.
    I'm an Admin from MSFT, and MSFT uses linux. Extensively. They just don't like to talk about it. "Seven" = NT 7.0. NT is MSFT's version of UNIX, which they licensed fom Novell.
    So, even microsoft contains unix code. Tada.  Lets' drop the operating system arguments for now though.
    I have three Dell servers, six Dell and HP desktops, and two laptops. All but two of them run linux full time, and only one is dual boot. Both laptops run linux exclusively and so do three of the desktops and ALL my servers. I've never in 12 years had a linux virus, and I never will. No, I don't even run a firewall, and there is no linux antivirus software accepted by the linux distributions, because it's useless. Not needed.
    All of these machines, XP, Vista, Ubuntu, Slackware, and Red Hat Server run on four brainless hubs, or switches. A switch is not capable of DHCP or DNS routing. They are passive devices which are not capable of blocking a router. They only stop working when they die. You can have switches [hubs] in ANY conceivable chain or configuration, and they still work the same, as they all take commands from whatever routers you have.
    The only router in my home is the verizon router. I have no need of others, but I've run dual and even triple routers before without a single problem. You set the extra routers to 192.168.2.1 instead of 1.1. Third router? 192.168.3.1. And so on. Painless.
    None of these devices have yet failed or ever blocked internet access, yet half the time when I call verizon FiOS, the tech people tell me to connect directly to the router with my laptop. I've always just TOLD them that I did, but I never ever did that. It's not necessary. If you can't connect to 192.168.1.1, the router is dead. checking hubs is an astoundingly simple task that only takes a second... you just go to any other computer on that hub, or plug in my laptop, and see if you can get through. I've had one hub fail in the last 8 years, and that didn't fool me for more than a minute. I replaced it and was back in biz without tech support help.
    ONLY in the instance where only ONE computer is down, does it make sense to isolate the router. Thus, the FiOS people are just trained to eliminate the obvious, but they also talk smack. MOCO? Why would I have a major OC24 type network connection in my home? I've been hit with just such questions. Wouldn't verizon know if I had a backbone connection through them???
    Here's the deal: Buy your own equipment, and get warranties. Unless the external box, ONT I believe they call it, has died, you're not likely to get a lot of support anyway - since verizon will not talk about anything other than their router and the ONT.  Save time and just be aware of your own eqiupment. I'm on my sixth day of having no FiOS since Verizon sent me a new also bad router and now I'm awaiting another replacement by the UPS people. Speed is not a hot button issue with verizon service apparently, but they are better than comcast.
    Good thing about verizon is that they don't appear to cap bandwidth, and for that I respect them no matter how much garbage I get from a few of the tech support staff. Even most of those people are pretty nice. One of them actually talked linux with me for a half hour, and that was a breath of fresh air.
    Verizon needs to realize that there are three to six times more linux operating systems in use now worldwide than all windows products combined. The US Army and US Navy have switched to linux systems and dumped windows. I'm shopping for another new desktop, and I'm only buying penguin computers. I won't buy "7" because I've seen the source code, and don't have a high opinion of it. Linux is more robust, and for whatever reason, MSFT still refuses to implement the System Five and UNIX security levels that are inherent to a safe Operating System, and a kernel component of unix. I don't see why not. NT is capable, but all suggestions to turn it 'on' are ignored.
    I want to see verizon get with the program and start to support linux. After all, it's fifteen times cheaper to maintain, and three times less expensive to develop for. Verizon would never have to deal with spyware and viruses from its users ever again. One day I hope verizon will wake up.
    In the meantime, it would be nice if the tech support at FiOS wouldn't misinform clients and customers about linux, macs, and having several computers in the home. There's nothing at all wrong with that. I just bought a netbook from you folks and I'm using that now to get online.

    All I have to say about that is, "People fear what they do not know." Everyone has a comfort zone. Some people's comfort zone is larger than others, or encompasses different aspects of life. Most Windows users aren't comfortable with Mac or Unix operating systems. Most English speakers aren't comfortable with foreign languages. Most two-year-olds aren't comfortable with spinach.
    C'est la vie.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Saving for web - how to get transparency saved?

    It works with saving it as png24, but only on a white background. How can I save it for web so that I can put a shop-banner with rounded corners on any coloured website background without adjusting it to the special colour onto which it shall be put. Or let's put it otherwise: How can I save it for no special colour, so that a customer may put it onto any kind of colour without having stupid white or black or grey coloured edges showing where the corners have been rounded and where I want it to be transparent?

    You need to replace the background with true transparency. First rename the Background layer to anything else. It is sufficient to double-click it in the Layers Palette and accept the default name "Layer 0". Select the background and delete it, replacing it with checkerboard pattern indicating transparency (in some cases it might be easier to select the object, invert the selection, and delete). Then when you save it to png or any other format, check the preserve transparency option if there is one.
    Here I started with a flag on off-white background. After renaming the Background layer and deleting the background here is the result.
    Important!  File types PSD, TIFF, PNG, GIF, EPS support transparency.  JPG, BMP do not.
    Note that you get the same result if you duplicate the Background layer, do the select/delete on the copy layer, and turn off the vivibility of the Background layer:

  • WebGL for Mavericks, how to get it ?

    While your browser seems to support WebGL, it is disabled or unavailable. If possible, please ensure that you are running the latest drivers for your video card. How do I solve this for Mavericks and Safari?

    Solved using solution to "How do I enbale WebGL in Safari 5.1?"

  • My little red circle with a 1 in it that looks like an update, is on my MAC desktop, I have no idea what it is for or how to get rid of it

    On my desktop on the dock, where the calendar app is, there is a rd circle with a 1 in it like the ones on iphone that show up for u pdates, I have never seen this on my desktop, does anyone know what it means? I don't think it is for an update?

    Cheryl,
    The number "1"  means that you have an event invitation. Open iCal and use iCal>View>Show Notifications to choose what to do with the notification.

Maybe you are looking for