BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]

Where you move the "BETA UEFI Releases for MSI 990FXA-GD65 [MS-7640 PCB 3.0] [E7640AMS.Jxx versions]" was in the link https://forum-en.msi.com/index.php?topic=151619.0?
That it´s ended?
Tank you
José Crispim
Portugal

>>Beta BIOSes<<

Similar Messages

  • BETA UEFI Releases for MSI 990FXA-GD80 [MS-7640 PCB 2.2] [E7640AMS.Dxx versions]

    E7640AMS.D43
    D30 ==> D43
    1.Add 220W CPU Support.
    1.Remove OVT function to fix CPU core temperature sometimes error under OS.
    1.Update Agesa_Orochi_RevC to 4.6.4.1_Agesa_Orochi_049.
    2.Update Orochi-AGESAMSI to 4.6.4.1_OR_049_AGESAMSI_m105.
    3.Update MsiOc-Orochi to MsiOc_Orochi_m110.
    Please note that flashing this release occurs entirely at your own risk!

    >>Beta BIOSes<<

  • BETA UEFI Releases for the A75MA-G55 [MS-7696 PCB v1.0]

    I am uploading the latest BETA Release for the A75MA-G55 [MS-7696 PCB v1.0] mainboard.  
    Currently, the latest version is E7696AMS.13A [=v1.3b10].
    E7696AMS.120 ---> E7696AMS.13A
    - Fix ps2 kb/mouse issue when WHQL test.
    - Update Llano-AGESAMSI module.
    - Update VBIOS to AMD_SUMO_GENERAL_100.
    - Update Llano-AGESAMSI module.
    --->Fixed DRAM Timing incorrect when DRAM insert DIMM3 or DIMM4.
    ------> a) When OC Genie Enable and insert 1600Mhz Memory, system will reduce Memory frequency to 1333Mhz, but work timing still use DDR1600. DRAM Timing mode must be set to Manual at this moment.
    ------> b) When OC Genie Disable, above setting have be set to Auto.
    - Add CPU FAN 3/4 PIN ITEM and System FAN1 SMART FAN Support.
    - Fixed select RAID mode and SATA decive plug on SATA1 or SATA2, system will hang CP#B2 issue.
    - Fixed AMD USB3 yellow mark issue in WHQL test.
    - Patch System FAN1 SMART Fan Support.
    - Fixed CPU/System1 SMART Fan cannot work on first setting.
    - Patch two Memory fail issue.
    ---->    G.Skill F3-1066CL7T-3GBPK
    ----> G.Skill F3-1066CL7T-6GBPK
    - Patch TL-584 and RST.
    - Fixed when Enabled TPM support, system will hang CP#4F 40 Sec issue.
    - Update TMP patch.
    - Update Llano-AGESAMSI module.
    - Update SB module to 4.6.4.1_AMD_SB900_017.
    - Update AHCI module to 4.6.3_AhciSrc_017.
    - Update CSM function.
    - Update PEI Ram Boot module to 4.6.3_PEIRamBoot_10.
    - Update smiflash module to 4.6.3.6_SMIFLASH_19.
    - Update shell module to 4.6.3_SHELL_20100528_01.
    - Update fixedbootorder module.
    - Update post time tune module to 4.6.4.0_PTT_06.
    - Update to 4.6.3.7_AgesaV5_039.Modified AGESAMSI setup menu for OCICC.
    - Show cpu ratio in cpuz module.
    - Add ukey function.
    - Add VGA display rule.
    - Adjust Initiate Graphic Adapter default to PEG.
    - Fix some time will hang 0Dh by fixbootorder function.
    - Fix plug PCI/PCIE lan card can't boot issue when the "Lan Option ROM" item set disabled.
    - Fix mflash boot issue.
    - Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
    - Fix memory-z part string issue for some memory.
    - Enable C'n'Q function as default and C1E item.
    - Add clear cmos function.
    - Adjust VGA display rule.
    - Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
    - Fix bev device cannot boot.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

    E7696AMS.146 ---> E7696AMS.140
    - Add UEFI_Driver module for doing raid and installing UEFI OS.
    E7696AMS.140 ---> E7696AMS.150
    - Add Agesa MSI Source safe version 4.6.3.7_Llano-AGESAMSI_040-4.   
    - Modified AGESAMSI Adjust Ratio function incorrect.  
    - Support CMOS bad flag in AGESA Platform Configuration.
    E7696AMS.150 ---> E7696AMS.162
    - Fix USB keyboard and mouse would useless after using m-flash boot function.
    - Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
    E7696AMS.162 ---> E7696AMS.163
    - Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
    - Fix windows boot order will be disordered after clear coms or load default.
    Please note that flashing this release occurs entirely at your own risk!
    >>Use the MSI HQ Forum USB flasher<<, Method II for best results.
    Do NOT use the BIOS/UEFI integrated M-Flash Routine.

  • MSI 990FXA-GD65 [MS-7640 PCB 3.0] throttling issue

    Hi, i'm on the last official BIOS (J.90) and my CPU throttle to 4x multiplier on my Phenom II X6 1090T.
    I got this problem on every cold start. And i need to reboot in order to temporary fix it...until the next cold start.
    I noticed that when i got the problem, the temperature readings are out of range: right now i'm stuck on X4 and AMD overdrive shows a constant 197°C on all cores and OCCT reports constant 255°C. So i figure it's related to throttling protection based on false/wrong temp values from the temp sensor.
    My CPU voltage is low, the big Noctua is properly installed and very cool (i can feel the heatpipes very cold!)
    I tried differents settings on the bios (disabling cool n quiet for example) but nothing helps. I made a clear CMOS with the hidden button on the connectors panel, problem still there, even with stock bios parameters.
    Is it a bios version issue ? do i need to rollback to another version ?
    I made a ticket to MSI support but response for now.
    Sorry for my bad english, i'm french
    EDIT: my PCB is a 3.0 one and maybe this is my cure ?
    "4.Fix the issue that CPU  Freq will drop  with PCB 3.0 mainboard when
              set AMD Cool'n'Quiet to disable and Pull off the power than enter system ."

    Quote from: ren33 on 30-November-12, 00:59:18
    I am little confused about UEFI versions names
    On this thread https://forum-en.msi.com/index.php?topic=151619.msg1197501#msg1197501 the latest UEFI is called E7640AMS.JA1 , but you recommend me to flash "BIOS 19.10B1"
    Is it the same ?
    Thanks !
    Yeah it's the same. The file is named .JA1 and it's shown at BIOS as "19.10B1". The latest official BIOS is 19.9!
    Your problem seems similar to mine (Core temp : 255°C at cold starts) so I think it's hardware failure (mainboard's sensor maybe)!

  • MSI 990FXA-GD65 revision

    in what difference of revision 3.0, 3.1 and 3.2 MSI 990FXA-GD65 ?

    I think it only depends on the BIOS version with which was the motherboard released.

  • MSI 990FXA-GD65 + AMD FX-6300 + 16GB 1866MHz RAM Won't Boot

    Hello,
    Today I received parts for my new gaming system (sans water cooler, using the stock heatsink+fan until then), however I'm experiencing problems with the setup.  The specs are as follows:
    - MSI 990FXA-GD65
    - AMD FX-6300 CPU
    - GSKILL 16GB (2x8GB) 1866MHz DDR3 RAM
    - Kingston SSDNow V300 120GB SSD
    - 2x MSI GeForce GTX 660 Ti
    - EVGA NEX750B1 PSU
    - BitFenix Comrade case
    Upon powering on (after assembly), the Phase Indicator only has the first two LEDs lit up (Phase 2 Power Mode, according to the manual).  No output is displayed on screen.  I've tried removing and re-inserting the CPU and removing one of the graphics cards, to no avail.
    I would appreciate any help/advise that could be offered, that I might get this system up and running!
    Kind Regards

    Try to run this system out of the case on non conductive area (e.g. plain cardboard) with 1 stick of RAM only, 1 GPU (try without any graphics cards too), single HDD/SSD, PSU of course, CPU+cooler and monitor+keyboard and mouse. When booting spam Delete and it should take you to the BIOS where you have to change timings of RAM suggested in the post about GSkill memory.
    If possible, borrow different brand of RAM to test your PC with.
    Make sure that if you're running single GPU, that video cable is connected to the card. If no GPU, then to the motherboard.

  • Msi 990fxa-gd65 posting problem

    hello all,
     have bought a MSI 990fxa-gd65 motherboard and the amd fx 8350 processor
    built it in a new system case and now it is not posting at all
    all the fans are working my dvd player works, hard disk is working but nothing on my display at all
    no beeping sounds and the display stays black
    put in another video card no luck (working card from another computer)
    put in another cpu amd fx 8120 no luck (working cpu from another computer)
    put in memory amd entertainment edition 1233 no luck (working memory from crosair  1233 from another computer no luck)
     850 watt powersupply (chandged it with 480 watt from another working computer no luck)
    is there a big problem with my motherboard or is ther something i missed???
    i am out of options sorry for the bad englisch hope someone can help me out
    John

    hi there
    the following is in the case
    850 watt powersupply it is checked and working
    nvidia videocard gtx560 3072mb checked and working
    amd memory entertainment edition ddr3 4gb 1333mhz (9-9-9-24) checked and working
    corsair memory ddr3 1333mhz 8 gb (2 x 4) (9-9-9-24) checked and working
    checked and working means i tried it in another case with another motherboard (gigabyte) and there it all works
    the memory i use is compatible i think have tried it in all configuraties possible
    only 1 slot with memory, 2 slots with memory , and all 4 slots with memory in all cases no luck                                                                      my hard drives are all western digitale and are working
    hope this will tell you enough
    John

  • MSI 990FXA-GD65 and Sapphire 7870 XT Tahiti - only 4 cards working

    Hi
    I am trying to use more than 4 GPU of 7870XT Tahiti working on MSI 990FXA-GD65, but only 4 GPUs are visible. In control panel (device lists) there is 5th when I use all x16 slots, but it looks as below:
    I use PCI-E 1x-16x and 16x-16x risers, also tried to short pins responbile for graphic card detection.
    Win 7 64-bit , tried Catalyst 13.1, 13.4 , power supply Lepa 1600W, CPU Sempron x2 190, 2GB RAM
    Please help with this issue.

    You have already been advised using more graphics cards than what is supported is not going to work. That is a user to user support answer that was provided. This is not MSI but a user to user forum of MSI products. MSI is not involved here, and the opinions & statements here are not connected to them in any official manner. Your question has been answered. This thread should now probably be locked.
    Quote
    It is sad MSI cannot support their customers in professional way no matter what they are using their equipment for. It is my private matter and counted on support. Thanks anyway
    Sorry, that is not going to fly! Would Ford Motor Company or Smith & Wesson willingly offer support to a bank robber knowing the intended purpose of their product? 

  • Msi 990fxa-gd65 vrm burned , refused rma :(

    Hello firstly a happy x-mas to everyone
    Let me state my story i bought msi 990fxa-gd65 and amd fx-8120 bulldozer cpu a few weeks back.
    i installed it and it ran was very happy for 2 days , then it happened... , seems the vrm's burned !
    let me explain you why i think was a faulty board.
    when it did ran it gave 1.37volts to cpu at idle , stock 3.1ghz turbo disabled, was all ready high for me , but i thought i will try newer bios later , as wanted to play some bf3.
    then i just ran 5min to see if all my memory is working , with blend test, and msi board gave 1.48 volts to cpu all stock settings nothing changed in bios except memory settings o.0
    1.48 was why to high looking at other reports etc.
    so when in bios to change last setting on my memory , and boom did not boot, try booting it few times, and boom there was smoke , vrms blown , without the pc even booting .
    so it seems board and cpu died, they rma the cpu but the board they refused to.
    the retail store told me they tried there best and only way i can get rma is with rma number from msi, i logged ticket on msi website no reply yet, hoping this post will get me a reply.
    CPU: fx8120 with noctua d14
    Motherboard: 990fxa-gd65
    RAM: ripjaws x 4gbx2
    Video: hd 6870 hawk
    HDD: ocz vertex 2 100gb and few 1tb's
    Operating system: windows 7 ultimate 64bit
    PSU: corsair hx750
    Case:haf 912
    ive seen allot of people online getting a rma for vrm's burned , just hope i can get one also :(

     You have to wait for reply from MSI as this forum is not directly connected with MSI HQ. We are simply user to user forum and have nothing to do with MSI HQ technical support.

  • GOP/UEFI BIOS For MSI 770GTX

    Hi
    Could I please get the GOP/UEFI Bios for the GTX770 4GB
    S/N: 602-V282-22SB1307018093
    Current BIOS Version: 80.04.C3.00.5C(P2005-0000)
    Thanks

    you can sue this one https://forum-en.msi.com/index.php?topic=183980.msg1322457#msg1322457

  • GOP/UEFI BIOS for MSI R7 Series Video Card

    Hi I need GOP/UEFI vbios for MSI R7 Serise video card
    Model: R7 250X 1GD5
    Seial No: 602-V271-24SB1403072315
    Thanks

    Use the attached. TV271MH.301
    To flash create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Unpack the provided archive (TV271MH.301.rar) and put the included file (TV271MH.301) on that stick.
    Rename the vbios files to .rom (e.g. one to 301.rom).
    Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 301.rom [ENTER] and let it flash the vbios.

  • UEFI GOP for MSI N660 Hawk 2G

    UEFI GOP for MSI N660 Hawk 2G
    Hi!
    I would like to know if there is an update for my N660 Hawk 2G, which would enable EUFI GOP (and Windows 8 Fast Boot!).
    S/N is : 602-V288-02SC1211045382
    Bios Version is currently 80.06.10.00.84(P2030-0000) according to GPU-Z...
    Thanks a lot!

    Quote from: Svet on 01-May-13, 22:35:36
    no other way, you need to contact msi support to ask for this.
    i can't located such vbios for your card.
    MSI china said no uefi BIOS

  • MSI 990fxa-gd65 new build won't boot or post

    Hi, any help with this issue would be most appreciated
    I have just built a new system spec below:
    MSI 990fxa-gd65
    AMD FX8350
    2 x 4GB Hyper X fury DDR3 1866Mhz RAM
    MSI GTX960 Graphics card
    1TB WD HDD
    Corsair HX1000w (recovered from an older machine and in full working order)
    Unit powers ok, all fans are running, HD, Graphics card fans run and lights up DVD drive spins up OK too.
    Motherboard has two cpu phase lights lit. There is no post beeps or video out.
    I've tried it with a single stick of memory and a different lower spec video card but nothing seems to work. Some posts are suggesting the CPU may not be supported with the MoBo's current version of bios so questions are:
    How can I find out the bios version and if it is compatible as it doesn't reach the bios screen?
    If it needs updating how do you update it?

    Hi,
    Post S/N of the motherboard and we are able to tell you (roughly) which BIOS version it has.
    What if you try without graphics card?
    Did you try to clear CMOS? --> >>Clear CMOS Guide<<
    If it needs updating, you will either need:
    -Supported CPU by current BIOS
    -SPI programmer (some IT services has one)

  • MSI 990FXA-GD80 (MS-7640) Raid issues

    I'm trying to reinstall my windows 7 64 bit on my MSI 990FXA-GD80 (MS-7640) in raid mode. When I'm in the installer and try to add the raid drivers it lists my controller but then BSODs right after loading the driver and yes I used the driver from the MB CD not to mention a number of others. One thing I noticed is that the drivers I found didn't exactly match the option ROM version on my board (3.3.1540.14) closest I found was either .13 or .17. Also when I went into the raid setup and tried to make a JBOD it spit out an error message saying I needed to select two disks to do that operation????? I work with a lot of different raid adapters and I've not seen that one
    So any ideas on this would be greatly appreciated.
    Thank You
    One really confused oldpolishguy

    E7640AMS.BE6
    1.Update clear cmos function.
    2.Fixed int15 can't load default.
    3.Fixed Press the Delete Key of Numeric Keypad can't enter setup issue.
    4.Fixed EFI shell resolution as 1024*768.
    5.Fixed ECO/STANDARD/OC Genie mode don't work issue.
    6.Add TPM windows inbox driver support.
    7.Remove beep for ps/2 if msifastboot enable.
    8.Fixed cpu frequency show error in mainpage when adjust cpu fsb.
    9.Fixed some usb kb or mouse would useless when hotplug in setup.
    Please note that flashing this release occurs entirely at your own risk!
    For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
    *NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

  • BETA BIOS Releases for the MSI 870A-G54 Mainboard [MS-7599 PCB v3.1/4.0]

    The latest BETA Release for the MSI 870A-G54 Mainboard is currently: A7599AMS.HE3 [=v17.14b3].
    Changelog:
    A7599AMS.HD0 [v17.13] ---> A7599AMS.HE3 [v17.14b3]
    - Add new bom
    - Fix the raid function fail.
    - Fixed CPU Frequency display error in CPU Specifications.
    - Fixed HDT45TWFK6DGR,HDT65TWFK6DGR,ADX640WFK42GR adjust cpu ratio error.
    - Fixed the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
    - Fixed AM3+ CPU ratio error under CPU-Z information.
    Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results.

    E7676IMS.163 --> E7676IMS.164
    * Adjust Lowest GT Ratio for different CPU.
    * Fix OC menu can't select down(when OC Genie Button Operation Enabled).
    * Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
    * Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
    E7676IMS.164 --> E7676IMS.165
    * Update Memory Initialize Reference Code to version:1.2.2.00
    * Add U-key function support USB3.0
    * Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
    * Hide the item "Super IO Chip".
    E7676IMS.165 --> E7676IMS.166
    * Remove USB3.0 Legacy Mode Support item.
    * Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
    E7676IMS.166 --> E7676IMS.160
    * Release MP BIOS.
    E7676IMS.160 --> E7676IMS.171
    * Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * Fixed UKEY compatible issue.
    E7676IMS.171 --> E7676IMS.172
    * Fixed default DRAM voltage incorrect issue when used low voltage memory.
    * In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
    * Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
    * CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
    E7676IMS.172 --> E7676IMS.173
    * Fix factory INT15 tool test Hang issue.
    * Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
    * Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
    * Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
    * Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
    Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<< 
    Do Not use the BIOS/UEFI integrated M-Flash Routine.

Maybe you are looking for